Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 192
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.3.2-1build1.1
Depends: libacl1 (= 2.3.2-1build1.1), libc6 (>= 2.38)
Description: access control list - utilities
 This package contains the getfacl and setfacl utilities needed for
 manipulating access control lists. It also contains the chacl IRIX
 compatible utility.
Homepage: https://savannah.nongnu.org/projects/acl/
Original-Maintainer: Guillem Jover <[email protected]>

Package: acpid
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 125
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1:2.0.34-1ubuntu2
Depends: libc6 (>= 2.38), sysvinit-utils (>= 3.05-4), kmod
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/acpid 5b934527919a9bba89c7978d15e918b3
 /etc/init.d/acpid 2ba41d3445b3052d9d2d170b7a9c30dc
Description: Advanced Configuration and Power Interface event daemon
 Modern computers support the Advanced Configuration and Power Interface (ACPI)
 to allow intelligent power management on your system and to query battery and
 configuration status.
 .
 ACPID is a completely flexible, totally extensible daemon for delivering
 ACPI events. It listens on netlink interface (or on the deprecated file
 /proc/acpi/event), and when an event occurs, executes programs to handle the
 event. The programs it executes are configured through a set of configuration
 files, which can be dropped into place by packages or by the admin.
Homepage: http://sourceforge.net/projects/acpid2/
Original-Maintainer: Josue Ortega <[email protected]>

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 452
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.137ubuntu1
Depends: passwd
Suggests: liblocale-gettext-perl, perl, cron, quota, ecryptfs-utils (>= 67-1)
Conffiles:
 /etc/adduser.conf 4869da5f5f508dfbc341342a272c36c8
 /etc/deluser.conf 11a06baf8245fd8d690b99024d228c1f
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 'Adduser' will choose UID and GID values that conform to Debian policy,
 create a home directory, copy skeletal user configuration, and
 automate setting initial values for the user's password, real name
 and so on.
 .
 'Deluser' can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
 'Adduser' and 'Deluser' are intended to be used by the local
 administrator in lieu of the tools from the 'useradd' suite, and
 they provide support for easy use from Debian package maintainer
 scripts, functioning as kind of a policy layer to make those scripts
 easier and more stable to write and maintain.
Original-Maintainer: Debian Adduser Developers <[email protected]>

Package: adwaita-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 12051
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 46.0-1
Replaces: adwaita-icon-theme-full (<< 45.1), gnome-themes-standard-data (<< 3.18.0-2~)
Provides: adwaita-icon-theme-full (= 46.0-1), gnome-icon-theme-symbolic
Depends: gtk-update-icon-cache, hicolor-icon-theme, ubuntu-mono
Recommends: librsvg2-common
Breaks: adwaita-icon-theme-full (<< 45.1), gnome-themes-standard-data (<< 3.18.0-2~), libmutter-12-0 (<< 44.8-3~), libmutter-13-0 (<< 45.3-3~)
Description: default icon theme of GNOME
 This package contains the default icon theme used by the GNOME desktop.
 The icons are used in core apps like Settings, Files, and GNOME Shell.
 .
 Other apps are recommended to include their own icons using the GNOME
 Design Team's Icon Development Kit.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: alsa-topology-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.2.5.1-2
Replaces: libasound2-data (<< 1.2.1)
Breaks: libasound2-data (<< 1.2.1)
Enhances: libasound2-data
Description: ALSA topology configuration files
 This package contains ALSA topology configuration files that can be used
 by libasound2 for specific audio hardware.
 .
 ALSA is the Advanced Linux Sound Architecture.
Original-Maintainer: Debian ALSA Maintainers <[email protected]>
Homepage: https://www.alsa-project.org/

Package: alsa-ucm-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 936
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.2.10-1ubuntu5.10
Depends: libasound2t64 (>= 1.2.7)
Description: ALSA Use Case Manager configuration files
 This package contains ALSA Use Case Manager configuration of audio
 input/output names and routing for specific audio hardware. They can be
 used with the alsaucm tool.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <[email protected]>

Package: amd64-microcode
Status: install ok installed
Priority: standard
Section: non-free-firmware/admin
Installed-Size: 678
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.20250311.1ubuntu0.24.04.1
Replaces: linux-firmware (<< 20220819.git8413c63c-0ubuntu1~)
Recommends: initramfs-tools (>= 0.113~) | dracut (>= 044) | tiny-initramfs
Breaks: intel-microcode (<< 2), linux-firmware (<< 20220819.git8413c63c-0ubuntu1~)
Conffiles:
 /etc/default/amd64-microcode eaa8a5fa3fb59af4f0f55e851a6e9b20
 /etc/modprobe.d/amd64-microcode-blacklist.conf 71327241f6583b34944e638a955aba91
Description: Processor microcode firmware for AMD CPUs
 This package contains microcode patches for all AMD AMD64
 processors.  AMD releases microcode patches to correct
 processor behavior as documented in the respective processor
 revision guides.  This package includes both AMD CPU microcode
 patches and AMD SEV firmware updates.
 .
 For Intel processors, please refer to the intel-microcode package.
Original-Maintainer: Henrique de Moraes Holschuh <[email protected]>

Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 455
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.4.58-1ubuntu8.13
Provides: httpd, httpd-cgi
Depends: apache2-bin (= 2.4.58-1ubuntu8.13), apache2-data (= 2.4.58-1ubuntu8.13), apache2-utils (= 2.4.58-1ubuntu8.13), media-types, perl:any, procps
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ssl-cert
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser, ufw
Conffiles:
 /etc/apache2/apache2.conf 354c9e6d2b88a0a3e0548f853840674c
 /etc/apache2/conf-available/charset.conf e6fbb8adf631932851d6cc522c1e48d7
 /etc/apache2/conf-available/localized-error-pages.conf f542d267bfce7815f9453eb1476e5f73
 /etc/apache2/conf-available/other-vhosts-access-log.conf 2cad303fc4221d6b0068a8b37597b9fb
 /etc/apache2/conf-available/security.conf 332668933023a463046fa90d9b057193
 /etc/apache2/conf-available/serve-cgi-bin.conf c146ad61e8853896938a5d30d7aa6c89
 /etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
 /etc/apache2/magic a6d370833a02f53db6a0a30800704994
 /etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
 /etc/apache2/mods-available/actions.conf aa7020bed65647b011cfb36e8567aa99
 /etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
 /etc/apache2/mods-available/alias.conf a1632bd99783ef6ca8a47a6005d04d56
 /etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
 /etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
 /etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
 /etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
 /etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
 /etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
 /etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
 /etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
 /etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
 /etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
 /etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
 /etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
 /etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
 /etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
 /etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
 /etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
 /etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
 /etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
 /etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
 /etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
 /etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
 /etc/apache2/mods-available/autoindex.conf 958f2742a80ae30f95507fb84e9eb018
 /etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
 /etc/apache2/mods-available/brotli.load da4d337dd726ab27221b06d92c998e36
 /etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
 /etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
 /etc/apache2/mods-available/cache_disk.conf 0b2be6d48bbad8b4e32eef623e3670bc
 /etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
 /etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
 /etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
 /etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
 /etc/apache2/mods-available/cgid.conf d7410fcd5d57c404144ed32e2d5c551f
 /etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
 /etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
 /etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
 /etc/apache2/mods-available/dav.load 2ee48948add72e6b8682d041acbcab7f
 /etc/apache2/mods-available/dav_fs.conf 9d5c750538bf58538c558b907ca924f1
 /etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
 /etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
 /etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
 /etc/apache2/mods-available/deflate.conf 2f28f35168069262fb1055abab5848fe
 /etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
 /etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
 /etc/apache2/mods-available/dir.conf 4dbfa06e481b9a2e874247fc8c157c3b
 /etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
 /etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
 /etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
 /etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
 /etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
 /etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
 /etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
 /etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
 /etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
 /etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
 /etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
 /etc/apache2/mods-available/http2.conf 5bc6b4b533d920c8b677f3bb37734a0f
 /etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
 /etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
 /etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
 /etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
 /etc/apache2/mods-available/info.conf 1fd47a9adf023a925301c58490417cf9
 /etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
 /etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
 /etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
 /etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
 /etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
 /etc/apache2/mods-available/ldap.conf f1c3882b24335ef261a90696e060813e
 /etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
 /etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
 /etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
 /etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
 /etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
 /etc/apache2/mods-available/md.load 4fa08b541b4bac4a4849e6fd6d69c973
 /etc/apache2/mods-available/mime.conf 5e9b0033f29b5bf2d9e736f7719ef1f9
 /etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
 /etc/apache2/mods-available/mime_magic.conf b0b89da0f5d38b6c7177113018fc475d
 /etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
 /etc/apache2/mods-available/mpm_event.conf 157cee0c8592d9e8bbffcd33abac3e2a
 /etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
 /etc/apache2/mods-available/mpm_prefork.conf 2c7263c7cd86af07dcedf627d0ad2ade
 /etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
 /etc/apache2/mods-available/mpm_worker.conf b57019603bf38326fcb7f9c0785a3c34
 /etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
 /etc/apache2/mods-available/negotiation.conf b023fc6578d5b64059df4dfe689cb779
 /etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
 /etc/apache2/mods-available/proxy.conf a3c7629e7a55080e9c2f4ff1c70a98b2
 /etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
 /etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
 /etc/apache2/mods-available/proxy_balancer.conf 8a37d3a532dbb4866d4dd58162812f85
 /etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
 /etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
 /etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
 /etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
 /etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
 /etc/apache2/mods-available/proxy_ftp.conf 12809c2f356d9c05dbdc887375a6bf1b
 /etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
 /etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
 /etc/apache2/mods-available/proxy_html.conf 6012bbc4155b99642dba050df6c9028f
 /etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
 /etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
 /etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
 /etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
 /etc/apache2/mods-available/proxy_uwsgi.load 37493bab0af283fd186d2797a9f5f95b
 /etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
 /etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
 /etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
 /etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
 /etc/apache2/mods-available/reqtimeout.conf 30ef0f5bd709e44eeee85e9f847000c0
 /etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
 /etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
 /etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
 /etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
 /etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
 /etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
 /etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
 /etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
 /etc/apache2/mods-available/setenvif.conf 86ccdba3939ec2deb3443acaff2c1988
 /etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
 /etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
 /etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
 /etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
 /etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
 /etc/apache2/mods-available/socache_redis.load 5c6ee35e3b89ea7ffdb19a2b344ada94
 /etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
 /etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
 /etc/apache2/mods-available/ssl.conf e0240208bf5bd725c1f192c2d1abb76e
 /etc/apache2/mods-available/ssl.load 8cc37c9d0db67f76c2871ed1d38c07b3
 /etc/apache2/mods-available/status.conf a2068bd13eadd9b0b9168d94e21c37b6
 /etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
 /etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
 /etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
 /etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
 /etc/apache2/mods-available/userdir.conf 202509138f19284efb527eff4cfb042a
 /etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
 /etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
 /etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
 /etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
 /etc/apache2/ports.conf e0eadfd8b9250d90d5c3004171eb78f6
 /etc/apache2/sites-available/000-default.conf 45ed6a20d7ff26b62d873585bc1b42ca
 /etc/apache2/sites-available/default-ssl.conf 58d23841f0ea37f6c3c1f1c7bda9c6d7
 /etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
 /etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
 /etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
 /etc/init.d/apache2 379d9173b08f87449abc0fbd44926194
 /etc/logrotate.d/apache2 a38d9e980faebcda9a1998fd0f90b69e
 /etc/ufw/applications.d/apache2-utils.ufw.profile f8d4fd920e598ceb4379613c6261f6af
Description: Apache HTTP Server
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 Installing this package results in a full installation, including the
 configuration files, init scripts and support scripts.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5018
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: apache2
Version: 2.4.58-1ubuntu8.13
Provides: apache2-api-20120211, apache2-api-20120211-openssl1.1
Depends: perl:any, libapr1t64 (>= 1.7.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libaprutil1t64 (>= 1.6.0), libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libcurl4t64 (>= 7.28.0), libjansson4 (>= 2.14), libldap2 (>= 2.6.2), liblua5.4-0 (>= 5.4.6), libnghttp2-14 (>= 1.50.0), libpcre2-8-0 (>= 10.22), libssl3t64 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser
Description: Apache HTTP Server (modules and other binary files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains the binaries only and does not set up a working
 web-server instance. Install the "apache2" package to get a fully working
 instance.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 857
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.58-1ubuntu8.13
Description: Apache HTTP Server (common files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains architecture-independent common files such as icons,
 error pages and static index files.
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 326
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.58-1ubuntu8.13
Depends: libapr1t64 (>= 1.4.8-2~), libaprutil1t64 (>= 1.5.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libssl3t64 (>= 3.0.0)
Description: Apache HTTP Server (utility programs for web servers)
 Provides some add-on programs useful for any web server.  These include:
  - ab (Apache benchmark tool)
  - fcgistarter (Start a FastCGI program)
  - logresolve (Resolve IP addresses to hostnames in logfiles)
  - htpasswd (Manipulate basic authentication files)
  - htdigest (Manipulate digest authentication files)
  - htdbm (Manipulate basic authentication files in DBM format, using APR)
  - htcacheclean (Clean up the disk cache)
  - rotatelogs (Periodically stop writing to a logfile and open a new one)
  - split-logfile (Split a single log including multiple vhosts)
  - checkgid (Checks whether the caller can setgid to the specified group)
  - check_forensic (Extract mod_log_forensic output from Apache log files)
  - httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: https://httpd.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: apparmor
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3132
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.0.1really4.0.1-0ubuntu0.24.04.6
Replaces: fcitx-data (<< 1:4.2.9.1-1ubuntu2)
Depends: debconf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38)
Suggests: apparmor-profiles-extra, apparmor-utils
Breaks: apparmor-profiles-extra (<< 1.21), fcitx-data (<< 1:4.2.9.1-1ubuntu2), snapd (<< 2.44.3+20.04~)
Conffiles:
 /etc/apparmor.d/1password a9fbdb7bc17bb4c908208c2c51e35f33
 /etc/apparmor.d/Discord 67bd979bd52072a84fc19480c5dd8ead
 /etc/apparmor.d/MongoDB_Compass 3f33e671cd57320de31656afa9886136
 /etc/apparmor.d/QtWebEngineProcess 0fe91825545b5a8375ad4f06219eb47b
 /etc/apparmor.d/abi/3.0 f97e410509c5def279aa227c7de12e06
 /etc/apparmor.d/abi/4.0 f17b0a97806d733b5b884d8a1c2fea37
 /etc/apparmor.d/abi/kernel-5.4-outoftree-network 57b68acd4e6418fe5a06dc8c04713e3d
 /etc/apparmor.d/abi/kernel-5.4-vanilla 77047e6f0b014fa8bf27681998382044
 /etc/apparmor.d/abstractions/X a32594e00980d28c2bb31602cbc28b75
 /etc/apparmor.d/abstractions/apache2-common 904b490fb92cef37b2fa236bfbc1630f
 /etc/apparmor.d/abstractions/apparmor_api/change_profile ebc3b740aa2c79ff9a09f072e67ab569
 /etc/apparmor.d/abstractions/apparmor_api/examine 7a0bb94ed3f1c4746e10159933e83376
 /etc/apparmor.d/abstractions/apparmor_api/find_mountpoint 33f8d5e37df9caec4028d295c8988ba1
 /etc/apparmor.d/abstractions/apparmor_api/introspect 9937e7f2a2ca88cd947570f18df7a942
 /etc/apparmor.d/abstractions/apparmor_api/is_enabled 16256dfcfa3c4bc6f97a956fcc254fb5
 /etc/apparmor.d/abstractions/aspell 0443ce39f2e74dde8bc99d67578ea777
 /etc/apparmor.d/abstractions/audio c0ac7361d58a8c0b1b2ab3d440ca9577
 /etc/apparmor.d/abstractions/authentication d21c8ea53bfc1712f086be6cd367194d
 /etc/apparmor.d/abstractions/base e99d8381520f227b8eaf44b73ff026e2
 /etc/apparmor.d/abstractions/bash 9663d039f0152b70cc659e4a25bef566
 /etc/apparmor.d/abstractions/consoles 3414c1cb4c1a951888a84761d1455c6d
 /etc/apparmor.d/abstractions/crypto 0b2705ea2a45989da8cbf6f72f633ecb
 /etc/apparmor.d/abstractions/cups-client aa077a620ae08407f42e743bb9661165
 /etc/apparmor.d/abstractions/dbus 5722cf7a9deb175a1ad0b2bd2311e358
 /etc/apparmor.d/abstractions/dbus-accessibility 99eef485f32c58839618af9a5a4b355b
 /etc/apparmor.d/abstractions/dbus-accessibility-strict 53a9eb9b0c2c0125eefa2990d2db5cf7
 /etc/apparmor.d/abstractions/dbus-network-manager-strict 122f241d720192cb38d6967bc23e356f
 /etc/apparmor.d/abstractions/dbus-session 35d364589e04be56979be11e2f7e31d5
 /etc/apparmor.d/abstractions/dbus-session-strict 1181eeeb79d894eaf2744bf7033a06d8
 /etc/apparmor.d/abstractions/dbus-strict 9d0a9ef3255f550687366cd4126f34d0
 /etc/apparmor.d/abstractions/dconf 938d36cc227c44b57b754e28c574a895
 /etc/apparmor.d/abstractions/dovecot-common c039273aaa213aca51a5213cdd15fed2
 /etc/apparmor.d/abstractions/dri-common 1d2f9b132358d514c1f93560b1988acb
 /etc/apparmor.d/abstractions/dri-enumerate c02e4d558bb87d573421e11268d3cb69
 /etc/apparmor.d/abstractions/enchant cd0a41e810a99aeeab33aa7d074ff510
 /etc/apparmor.d/abstractions/exo-open c9c0e92a3d96bd795af54343ca2f7247
 /etc/apparmor.d/abstractions/fcitx 7b92a08259791096efa9ec4aaf42c65d
 /etc/apparmor.d/abstractions/fcitx-strict 8516d9814d599c06054de013d935b383
 /etc/apparmor.d/abstractions/fonts 2a254d9d6f5bc6ac1dc73214193083cd
 /etc/apparmor.d/abstractions/freedesktop.org fddb3f108af4001f4a648e37ecfb1142
 /etc/apparmor.d/abstractions/gio-open e056aa1df18785c584f2f8e734a865b6
 /etc/apparmor.d/abstractions/gnome ce1abdbe93ac7d3d9da51b76616e7990
 /etc/apparmor.d/abstractions/gnupg 2b9899ae239d51a6cd93ccc82c52d234
 /etc/apparmor.d/abstractions/groff 9ac220293c87a17fbd9c8664231b7136
 /etc/apparmor.d/abstractions/gtk c3e77ec5a57f6c5996749b636b257d40
 /etc/apparmor.d/abstractions/gvfs-open 0aa5a1831e2f3321032fcbb78c75e17f
 /etc/apparmor.d/abstractions/hosts_access 9932e0e59cf8a3b86aff275430db7f79
 /etc/apparmor.d/abstractions/ibus cbdc8f7f4aa4192caa920edf6b27c101
 /etc/apparmor.d/abstractions/kde 9d3df34ba20b1d1f2a171e6003a64a50
 /etc/apparmor.d/abstractions/kde-globals-write 66b5c9d5f6b1be675ea41b93e2a40e86
 /etc/apparmor.d/abstractions/kde-icon-cache-write 5812ee3c6e213036512c4dd28a45b0c0
 /etc/apparmor.d/abstractions/kde-language-write f99c8ecacf0f94aafb402e4bda6ff9f0
 /etc/apparmor.d/abstractions/kde-open5 dc4ab3305486c36b4fc34b8d075cb706
 /etc/apparmor.d/abstractions/kerberosclient 70be1b7c525d98654011a7f0bf8b9634
 /etc/apparmor.d/abstractions/ldapclient fa595508690d29fb8ef3bc7f35cd3d34
 /etc/apparmor.d/abstractions/libpam-systemd bab0769af2d7ec03fb89ebcc7dba5133
 /etc/apparmor.d/abstractions/likewise e2eff3c963b34543b78a2e7e92c2832b
 /etc/apparmor.d/abstractions/mdns f60fb04172f264ca93dd91f376c6d198
 /etc/apparmor.d/abstractions/mesa dbfd7cef67b616f33464ca9cf2ab1e5f
 /etc/apparmor.d/abstractions/mir 3ca5ef4b46fdf1e182a96d6560ff26e1
 /etc/apparmor.d/abstractions/mozc a3d1ff87b7822abd5fcaed6844dc296a
 /etc/apparmor.d/abstractions/mysql b12fe1f2bbab642e5851c281986057d0
 /etc/apparmor.d/abstractions/nameservice 36db55283ec502af766e70d12b517535
 /etc/apparmor.d/abstractions/nis 30256a48a705a362b6bc496d2024aa3c
 /etc/apparmor.d/abstractions/nss-systemd 7ed15a941f68ba8326ba03d6d282a4c1
 /etc/apparmor.d/abstractions/nvidia 4927cd22ab0f892bc619cc0f1912923e
 /etc/apparmor.d/abstractions/opencl 2760fba2c4606e11942737d471cd94e7
 /etc/apparmor.d/abstractions/opencl-common 7d6341d69734db1e449b00784d465c70
 /etc/apparmor.d/abstractions/opencl-intel dfdb37b0c1cf107e0831c70ef9c0aa39
 /etc/apparmor.d/abstractions/opencl-mesa e157c360ed8cc0a1f5f883be73f2a416
 /etc/apparmor.d/abstractions/opencl-nvidia 8d9e4c40933e8c9844f4b250fb89aed0
 /etc/apparmor.d/abstractions/opencl-pocl dfedd51c459fac5805577d19471aa764
 /etc/apparmor.d/abstractions/openssl fb8cf830a6be79f9c356e0d73f880ce4
 /etc/apparmor.d/abstractions/orbit2 e7ac7aea7951ccb6e9078265f9a2b9ff
 /etc/apparmor.d/abstractions/p11-kit ca4ba017568739d7150f162ec69036e0
 /etc/apparmor.d/abstractions/perl e1913931bfed156d33fe313d49f5bd0d
 /etc/apparmor.d/abstractions/php a09e568316649c33fcb743129e38e3a4
 /etc/apparmor.d/abstractions/php-worker fa7a754d5b039a507084094a3d3a8e68
 /etc/apparmor.d/abstractions/php5 cf013176d89542d9b5931cd1c6ff5096
 /etc/apparmor.d/abstractions/postfix-common 48ff0b5d3ffd8a97e305c85ed7b10475
 /etc/apparmor.d/abstractions/private-files 971749f2d6112faa125c848f739c8752
 /etc/apparmor.d/abstractions/private-files-strict 3dd8bfaf6f4405b56e526de085087369
 /etc/apparmor.d/abstractions/python f49e8327900da9b963678574057d49e3
 /etc/apparmor.d/abstractions/qt5 225b633954b4552cd1e1a7b6c0034956
 /etc/apparmor.d/abstractions/qt5-compose-cache-write 3cbd481cf1e9aadae90118b4614c9f7b
 /etc/apparmor.d/abstractions/qt5-settings-write 2341b9405a1923ce1f7c614ac68138c0
 /etc/apparmor.d/abstractions/recent-documents-write 57bfcdf4fc0f790c4a51f2678f4fdd17
 /etc/apparmor.d/abstractions/ruby 647a1c14accb31774540d8b7e14811a5
 /etc/apparmor.d/abstractions/samba 80ac5ea6902855b6e9cc84cf90c86a23
 /etc/apparmor.d/abstractions/samba-rpcd dd45d69fae139d7d3121af8f2a28d884
 /etc/apparmor.d/abstractions/smbpass 98782c8623443b1ac4477222824526ee
 /etc/apparmor.d/abstractions/snap_browsers d62388a5173f6945ebb1f41b9ec5c07b
 /etc/apparmor.d/abstractions/ssl_certs 5bf050da765885e2e2c3440d1ffe2d6a
 /etc/apparmor.d/abstractions/ssl_keys f804c6623c0b8584153ca06051342c00
 /etc/apparmor.d/abstractions/svn-repositories f281784467cdf8f7f830337a5ba7f5c9
 /etc/apparmor.d/abstractions/transmission-common c1459adbbdbef0304bc0d1030fb55476
 /etc/apparmor.d/abstractions/trash 77f74bce1c671f56cf013ec880664499
 /etc/apparmor.d/abstractions/ubuntu-bittorrent-clients bc214039e36aed33834aefca14fcb9e1
 /etc/apparmor.d/abstractions/ubuntu-browsers 1964f219262f91c8b97b3cab3c5b1a15
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/chromium-browser a1ceac1f3b12257a2db931106456eef9
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/java a9387035914b3de93f96c99418dd306a
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/kde fb384b79814196058f69c581734c2bf3
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto 8ee5eeea9b891d9dd037cb16b37605a6
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia e8cda78bbc9882532d0f3c8048e85d7c
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common a015fbc234f8ecba0c1db8d1c50efb0b
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity 6fbd4a5744bbd882c3eec994bc6d0fb0
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 3d486fae7348f69946dfd58f5b6e9747
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration 3a29e910c7229ebf8efb8d7186d82f6f
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul d0ff22a6313a0fbf4a4f7da7b5576307
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files ad32d9011654972455c717bbe978b705
 /etc/apparmor.d/abstractions/ubuntu-console-browsers 6215673c66fd3e54cb6e1271f9aa0029
 /etc/apparmor.d/abstractions/ubuntu-console-email 0ff7d2311f36eba04ef50ec8261de8de
 /etc/apparmor.d/abstractions/ubuntu-email 3aef68a8ce2190e2b0c32f3889fe2fbb
 /etc/apparmor.d/abstractions/ubuntu-feed-readers 6d9f88c53a369529a5ff52573a051d90
 /etc/apparmor.d/abstractions/ubuntu-gnome-terminal 8063a4cbeb334a914c7bf2a65e5f2c3c
 /etc/apparmor.d/abstractions/ubuntu-helpers 735892ffbbf93ee9973587aaa15bd0b0
 /etc/apparmor.d/abstractions/ubuntu-konsole 3226c189b7aacae0b2616827fac54510
 /etc/apparmor.d/abstractions/ubuntu-media-players edc01db2f2804479007c463b005d7708
 /etc/apparmor.d/abstractions/ubuntu-unity7-base 9f95ccd27db1a6d581f512b6d8045d13
 /etc/apparmor.d/abstractions/ubuntu-unity7-launcher 6a9c25f230ba41e8289514d9a8f0f87e
 /etc/apparmor.d/abstractions/ubuntu-unity7-messaging 69b93d5b6693179432ec7c33e1f30434
 /etc/apparmor.d/abstractions/ubuntu-xterm 7a896bda3883f05f19e46468fa01ec8b
 /etc/apparmor.d/abstractions/user-download 2c764a6e080a4549661404fe74d2bef2
 /etc/apparmor.d/abstractions/user-mail fc821b70bcb3f4735ae58cbc328f60cc
 /etc/apparmor.d/abstractions/user-manpages da6ee9a1273a3544813d0d280814ceb4
 /etc/apparmor.d/abstractions/user-tmp 637812127e85496565b15f092aa9028c
 /etc/apparmor.d/abstractions/user-write 5b2101d68ba7e9e1bb58b9806672ae5a
 /etc/apparmor.d/abstractions/video 3069d0fbea27eed63e8724084015b57e
 /etc/apparmor.d/abstractions/vulkan bbed303bc8d8b2702d9d7f2fd7ed388a
 /etc/apparmor.d/abstractions/wayland d8ef4acb801443585a0fa309234b63d7
 /etc/apparmor.d/abstractions/web-data e46da21cb61d259f7410a72a32d2319d
 /etc/apparmor.d/abstractions/winbind 489fca3c058879cff0c69f160f453e82
 /etc/apparmor.d/abstractions/wutmp 9a4f59721ce850d90f5ca995f21e23b1
 /etc/apparmor.d/abstractions/xad 40464a5c359d30d98d72702aba58255e
 /etc/apparmor.d/abstractions/xdg-desktop 5a0a148ee79a27a546e5618ecc17a0f8
 /etc/apparmor.d/abstractions/xdg-open 989de0df5dce3d28f223ec7e83288728
 /etc/apparmor.d/balena-etcher 41dc7a55c7739f6ca133d29413a414e0
 /etc/apparmor.d/brave c7e3828647deb93ba1524ba49f6b6c78
 /etc/apparmor.d/buildah 692a0246f1d9bde5bcd97a1c540ea4bf
 /etc/apparmor.d/cam d1ac502776782c6b264cda89a769b509
 /etc/apparmor.d/ch-checkns e6ed1d0331ec1651b1c117cfa791aca7
 /etc/apparmor.d/ch-run 4e8f28caf0d00397377439eb470caa0c
 /etc/apparmor.d/chrome 76e226068a9df356c67e7a3d470d1ebb
 /etc/apparmor.d/code 0f9bad29b9cf3ea8ab27f6b6f3796129
 /etc/apparmor.d/crun e098756fa8f9f1c8ca4049af47a74fd4
 /etc/apparmor.d/devhelp bd1226d7e9b4988bb3933684a4406914
 /etc/apparmor.d/element-desktop d39b0c4bff076ea329f5dbbaa82e2ba7
 /etc/apparmor.d/epiphany 6bda34c482685db22cea75a6ad7476ea
 /etc/apparmor.d/evolution b1f70bc4c650108fa213e8279225e0ec
 /etc/apparmor.d/firefox f1829bd518068599ea95e4b5a58b64c1
 /etc/apparmor.d/flatpak 6f8173f861fc3d78a5046d899d0b4b59
 /etc/apparmor.d/foliate c92d766801e2ac02123e0db70b97ea55
 /etc/apparmor.d/geary 6440c82a66a81d652075b99712a3cbda
 /etc/apparmor.d/github-desktop 2122e73f32672b2e657ae1458eb26727
 /etc/apparmor.d/goldendict de9f3bb31c80756ae55a31e8ed4a3be6
 /etc/apparmor.d/ipa_verify df74e854eac8b988f15d8b21f3f5ae44
 /etc/apparmor.d/kchmviewer b57ea6f66a082f50fc24ec3922bedd6f
 /etc/apparmor.d/keybase de653466fa5c38e2dd697794250c10a9
 /etc/apparmor.d/lc-compliance c6602ecb174135de2520abe7e2d66aeb
 /etc/apparmor.d/libcamerify d61830a55b0f5803dcb120e38ff514da
 /etc/apparmor.d/linux-sandbox 03ce2ec6971f9afeee6f7c2e9688baac
 /etc/apparmor.d/local/README c2697f764b5164f3b9195857290df7df
 /etc/apparmor.d/loupe 9cd53d4893feabf3a85bed91253b520f
 /etc/apparmor.d/lsb_release 1cd1aa219c116e6ac7e406b7b080cf72
 /etc/apparmor.d/lxc-attach 8e84c6f99b66f14957215c1ca65df341
 /etc/apparmor.d/lxc-create 9c61264b7dcdec579c99143f3b219cdb
 /etc/apparmor.d/lxc-destroy 3c5bf3780350b4854af5f6f1f6d86f39
 /etc/apparmor.d/lxc-execute 4727b3eba3181e290839953309d2db87
 /etc/apparmor.d/lxc-stop 4b96d873788cc6e9d064dd3bc495a4fe
 /etc/apparmor.d/lxc-unshare a9053aae62b0daa1d7fd9e62bafdcbeb
 /etc/apparmor.d/lxc-usernsexec 6bd0e80c5e92542b6b2d02352ee540ae
 /etc/apparmor.d/mmdebstrap a7e1ac1d7f16053f735f3b44a67840ee
 /etc/apparmor.d/msedge 285ddc96bdcca201f8ed35e38229a92a
 /etc/apparmor.d/notepadqq 6c24799230bc8f06b33b3b461c7972c0
 /etc/apparmor.d/nvidia_modprobe 35b7b433c83dc39cb5ae0537d68ba568
 /etc/apparmor.d/obsidian 6bbf1654bfcd4ac1d702cd1adcfde542
 /etc/apparmor.d/opam 52c194ff83de698797647437047841d3
 /etc/apparmor.d/opera b09f37170593933806df51b1a2c136f9
 /etc/apparmor.d/pageedit c20709c6b0a79f13e964d92f7eb81a2f
 /etc/apparmor.d/plasmashell 24c4b944eb1f641f2df3020f9e4dc7df
 /etc/apparmor.d/podman 6fc4a4758bb26d4d40a2762692195885
 /etc/apparmor.d/polypane b1cd95df33baaf4384ef5c14492ba096
 /etc/apparmor.d/privacybrowser dbb425e0980c7e1e9033b43aba864b76
 /etc/apparmor.d/qcam 5952fc84b00d8aec0e8e9d805bd31af2
 /etc/apparmor.d/qmapshack ce57b415f0b224b6b9e1674d3184568d
 /etc/apparmor.d/qutebrowser 1c9fc541582fe736ecc9b7eae42c20ad
 /etc/apparmor.d/rootlesskit a6718e232ff378f3271467a9124b4eea
 /etc/apparmor.d/rpm 1d6b51dd975371cc952856f4a3d625a6
 /etc/apparmor.d/rssguard cd9ed0429e53ea8b5d31e2d544585e5c
 /etc/apparmor.d/runc 3335a9af57ce5e863930b6d03d53ba40
 /etc/apparmor.d/sbuild 2ecb939ead7308849e09c616f28cc93d
 /etc/apparmor.d/sbuild-abort 2e8ae36212b9d40f9e68f424737a10e1
 /etc/apparmor.d/sbuild-adduser 377a8fe84a14a95af5428239f6eaa218
 /etc/apparmor.d/sbuild-apt 8ec8122adf448bd38bc7d14dec1a8b72
 /etc/apparmor.d/sbuild-checkpackages a2d5dffff77a59854ce8b0a3406202a2
 /etc/apparmor.d/sbuild-clean 1baf8007c80c5e14eb8b7cee2a3148a0
 /etc/apparmor.d/sbuild-createchroot 7082ab20a6deaed506ce47ed46d1ac90
 /etc/apparmor.d/sbuild-destroychroot baec2cfed39dcfb723b91bf60bb2b8ec
 /etc/apparmor.d/sbuild-distupgrade 58301d36e68764101a09375fe27ae9af
 /etc/apparmor.d/sbuild-hold a7d34ec9bc5237c3032e088dc02bb3dd
 /etc/apparmor.d/sbuild-shell 5be9b23fb7c9c8708e38f9ca27169f61
 /etc/apparmor.d/sbuild-unhold 34d84c1f2c00b53eef7b6ce8a5220d71
 /etc/apparmor.d/sbuild-update 9e972d4525d587f03c8ac532ccec53fe
 /etc/apparmor.d/sbuild-upgrade f026f0679ab74b9ba54b89505420251e
 /etc/apparmor.d/scide 69d5df4d85f2d888fc6f3a2a02ae710e
 /etc/apparmor.d/signal-desktop 7e8b436217279ba903f2e9d84390a498
 /etc/apparmor.d/slack dcc561b40dfc7cd959533469d8a07083
 /etc/apparmor.d/slirp4netns 6143c40fcda8bec2f36e97e9ba7c20b5
 /etc/apparmor.d/steam 26615466c8cae2bfb8300d7474cb864c
 /etc/apparmor.d/stress-ng e3b5a8e8e142b48a79c4250371ac7a32
 /etc/apparmor.d/surfshark 1b389518cbaf6005b81044bd61424fe0
 /etc/apparmor.d/systemd-coredump fea0984f8368c0b1952b20b5d1727683
 /etc/apparmor.d/thunderbird 43cea46111c67e0e66fe5765e8c73939
 /etc/apparmor.d/toybox d00e2af7f00f3ef3383fcaaadac3e626
 /etc/apparmor.d/transmission e28f72f28a5ae9fda179609a9d6d632f
 /etc/apparmor.d/trinity 4a6f33f1d61c65a63138ad7f58e25d53
 /etc/apparmor.d/tunables/alias 3a4f5cae71b044f38c481adbe3642b33
 /etc/apparmor.d/tunables/apparmorfs e2074b490a25348fe38bb14a67189b50
 /etc/apparmor.d/tunables/dovecot 337ca6dc41c0ae4c156a7b111c946bb4
 /etc/apparmor.d/tunables/etc eaa7eb0aed2f57f233df1534219add7b
 /etc/apparmor.d/tunables/global 5bcd8895cb67489d5b619d24c14af7b1
 /etc/apparmor.d/tunables/home 18eda20e8b1a8d45955d582cd18dd621
 /etc/apparmor.d/tunables/home.d/site.local 3b274206fb06833ee3e151e351dad51b
 /etc/apparmor.d/tunables/kernelvars 1e1c274b547b8946eed0eff158300e03
 /etc/apparmor.d/tunables/multiarch 580f535cd1df7ac32d04cac4974274cd
 /etc/apparmor.d/tunables/multiarch.d/site.local 3c9eef1fbfb41fc452060086262e7bcb
 /etc/apparmor.d/tunables/proc 2065e74ad990713ead4b32002acdc82c
 /etc/apparmor.d/tunables/run 96ac843a343694802ade445fd351e43a
 /etc/apparmor.d/tunables/securityfs 94e4dd81e625ebb7e0ceb02fbd492612
 /etc/apparmor.d/tunables/share e11aafffd58011c5d832b98bc71372a7
 /etc/apparmor.d/tunables/sys 30f2fdf4695c26642ea02b5a2063cfbc
 /etc/apparmor.d/tunables/system dd94eef017cf91d8ea1ff5891aecab24
 /etc/apparmor.d/tunables/xdg-user-dirs 7eeab5e5987a04857db2f367b07ab4bb
 /etc/apparmor.d/tup 523fab6a982527f3477970aaa64b3e76
 /etc/apparmor.d/tuxedo-control-center 53cb9b6edee094984349ab0a1a38efda
 /etc/apparmor.d/unix-chkpwd 71f57a7d43d5dec3199b6ad95a97802f
 /etc/apparmor.d/unprivileged_userns 588e4c06bb88ca522fd840c83117569f
 /etc/apparmor.d/userbindmount 40677d9a5e9228b9203aa9b917b1dfab
 /etc/apparmor.d/uwsgi-core 1563f58f3bd1b679b27c5093b766daf4
 /etc/apparmor.d/vdens d5453365eeb2ef78bdabd230d2e528b6
 /etc/apparmor.d/virtiofsd 7a292c9bcbf7ed74ae7e3df8ad325b7b
 /etc/apparmor.d/vivaldi-bin 1838b1259fdf616a38b954132af05b30
 /etc/apparmor.d/vpnns 0f96d656c110471b7f355107b9e0d366
 /etc/apparmor.d/wike 5f663fc016cc49b2846bd749f0e54306
 /etc/apparmor.d/wpcom 8f77cd143ac7083c6678368773a21034
 /etc/apparmor/parser.conf 9d1488d81b7984033958e74dbad682ce
 /etc/init.d/apparmor 42e157dc91f6554abefa2160c2bc42db
Description: user-space parser utility for AppArmor
 apparmor provides the system initialization scripts needed to use the
 AppArmor Mandatory Access Control system, including the AppArmor Parser
 which is required to convert AppArmor text profiles into machine-readable
 policies that are loaded into the kernel for use with the AppArmor Linux
 Security Module.
Homepage: https://apparmor.net/
Original-Maintainer: Debian AppArmor Team <[email protected]>

Package: apport
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 656
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 2.28.1-0ubuntu3.8
Replaces: python-apport (<< 2.2-0ubuntu1)
Depends: apport-core-dump-handler | python3-zstandard, apport-core-dump-handler | systemd-coredump, gir1.2-glib-2.0 (>= 1.29.17), python3, python3-apport (>= 2.28.1-0ubuntu3.8), python3-gi, sensible-utils
Recommends: apport-symptoms, python3-systemd
Suggests: apport-gtk | apport-kde, pkexec, polkitd
Breaks: python-apport (<< 2.2-0ubuntu1)
Conffiles:
 /etc/apport/crashdb.conf e3e824635af3294361207a4960fe344d
 /etc/apport/report-ignore/README.denylist 51fb10c178a7b87ae0b75df3078901cd
 /etc/cron.daily/apport df5d3bc9ab3a67b58156376318077304
 /etc/default/apport 3446c6cac185f44237f59786e006ebe4
 /etc/logrotate.d/apport fa54dab59ef899b48d5455c976008df4
Description: automatically generate crash reports for debugging
 apport automatically collects data from crashed processes and
 compiles a problem report in /var/crash/. This utilizes the crashdump
 helper hook provided by the Ubuntu kernel.
 .
 This package also provides a command line frontend for browsing and
 handling the crash reports. For desktops, you should consider
 installing the GTK+ or Qt user interface (apport-gtk or apport-kde).
Homepage: https://wiki.ubuntu.com/Apport

Package: apport-core-dump-handler
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 37
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: apport
Version: 2.28.1-0ubuntu3.8
Replaces: apport (<< 2.27.0-0ubuntu7~), core-dump-handler
Provides: core-dump-handler
Depends: apport (>= 2.27.0-0ubuntu7~)
Pre-Depends: init-system-helpers (>= 1.54~)
Breaks: apport (<< 2.27.0-0ubuntu7~)
Conflicts: core-dump-handler
Conffiles:
 /etc/init.d/apport cfe03fd39e0f1b45972349fcb25091d4
Description: Kernel core dump handler for Apport
 apport automatically collects data from crashed processes and
 compiles a problem report in /var/crash/. This utilizes the crashdump
 helper hook provided by the Ubuntu kernel.
 .
 This package provides the service that configures the kernel (via
 /proc/sys/kernel/core_pattern) to forward the crash dumps to apport.
Homepage: https://wiki.ubuntu.com/Apport

Package: apport-symptoms
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 0.25
Recommends: apport
Description: symptom scripts for apport
 Apport intercepts program crashes, collects debugging information about the
 crash and the operating system environment, and sends it to bug trackers in a
 standardized form. It also offers the user to report a bug about a package,
 with again collecting as much information about it as possible.
 .
 This package extends Apport by some "symptom" scripts, so that bug reporters
 do not have to guess the correct package, but report problems based on
 symptoms that they have (like "sound problem"), through an interactive process.
Homepage: https://wiki.ubuntu.com/Apport

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 4108
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.8.3
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 2.8.3)
Depends: base-passwd (>= 3.6.1) | adduser, gpgv, libapt-pkg6.0t64 (>= 2.8.3), ubuntu-keyring, libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgnutls30t64 (>= 3.8.1), libseccomp2 (>= 2.4.2), libstdc++6 (>= 13.1), libsystemd0
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conflicts: apt-verify, libnettle8 (<< 3.9.1-2.2~)
Conffiles:
 /etc/apt/apt.conf.d/01-vendor-ubuntu c69ce53f5f0755e5ac4441702e820505
 /etc/apt/apt.conf.d/01autoremove 879455db9b938ce287b23383629aedce
 /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <[email protected]>

Package: apt-utils
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 660
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: apt
Version: 2.8.3
Depends: apt (= 2.8.3), libapt-pkg6.0t64 (>= 2.8.3), libc6 (>= 2.34), libdb5.3t64, libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of Debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.
Original-Maintainer: APT Development Team <[email protected]>

Package: at
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 155
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.2.5-2.1ubuntu3
Depends: libpam-runtime (>= 1.0.1-11), lsb-base (>= 3.2-14), libc6 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~)
Suggests: default-mta | mail-transport-agent
Conffiles:
 /etc/at.deny 8cb7e7632119dc26115436938efd2522
 /etc/init.d/atd ce2de503acc3de02f544571e89d4d717
 /etc/pam.d/atd ccdb71bdfe8764a2feb0f6e4ebbd378d
Description: Delayed job execution and batch processing
 At and batch read shell commands from standard input
 storing them as a job to be scheduled for execution in the
 future.
 .
 Use
  at    to run the job at a specified time
  batch to run the job when system load levels permit
Homepage: http://blog.calhariz.com
Original-Maintainer: Jose M Calhariz <[email protected]>

Package: at-spi2-common
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 52
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: at-spi2-core (<< 2.46.0-2~)
Breaks: at-spi2-core (<< 2.46.0-2~)
Description: Assistive Technology Service Provider Interface (common files)
 This package contains the common resource files of GNOME Accessibility.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: at-spi2-core
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 177
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.52.0-1build1
Depends: libatspi2.0-0t64 (>= 2.9.90), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libglib2.0-0t64 (>= 2.79.0), libsystemd0, libx11-6, libxtst6, at-spi2-common, gsettings-desktop-schemas
Conffiles:
 /etc/X11/Xsession.d/90qt-a11y afc7b6dfce4d98efa295023045b20424
 /etc/environment.d/90qt-a11y.conf 4f76c97d1817370071bed644d921f142
 /etc/xdg/Xwayland-session.d/00-at-spi da53e8f602edbb788b3cd6dbb056e45d
 /etc/xdg/autostart/at-spi-dbus-bus.desktop b97f071f92cfc4af379984b27cbb7304
Description: Assistive Technology Service Provider Interface (D-Bus core)
 This package contains the core components of GNOME Accessibility.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: autoconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2024
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2.71-3
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
 /etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
 The standard for FSF source packages.  This is only useful if you
 write your own programs or if you extensively modify other people's
 programs.
 .
 For an extensive library of additional Autoconf macros, install the
 `autoconf-archive' package.
 .
 This version of autoconf is not compatible with scripts meant for
 Autoconf 2.13 or earlier.
Original-Maintainer: Debian QA Group <[email protected]>
Homepage: https://www.gnu.org/software/autoconf/

Package: automake
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1576
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: automake-1.16
Version: 1:1.16.5-1.3ubuntu1
Provides: automake-1.16, automaken
Depends: autoconf, autotools-dev
Suggests: autoconf-doc, gnu-standards
Description: Tool for generating GNU Standards-compliant Makefiles
 Automake is a tool for automatically generating `Makefile.in's from
 files called `Makefile.am'.
 .
 The goal of Automake is to remove the burden of Makefile maintenance
 from the back of the individual GNU maintainer (and put it on the back
 of the Automake maintainer).
 .
 The `Makefile.am' is basically a series of `make' macro definitions
 (with rules being thrown in occasionally).  The generated
 `Makefile.in's are compliant with the GNU Makefile standards.
 .
 Automake 1.16 fails to work in a number of situations that Automake
 1.11, and 1.15 did, so some previous versions are available as separate
 packages.
Homepage: https://www.gnu.org/software/automake/
Original-Maintainer: Eric Dorland <[email protected]>

Package: autotools-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 134
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 20220109.1
Replaces: autoconf (<< 2.70~)
Breaks: autoconf (<< 2.70~)
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
 This package installs an up-to-date version of config.guess and
 config.sub, used by the automake and libtool packages.  It provides
 the canonical copy of those files for other packages as well.
 .
 It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
 best practices and guidelines for using autoconf, automake and
 friends on Debian packages.  This is a must-read for any developers
 packaging software that uses the GNU autotools, or GNU gettext.
 .
 Additionally this package provides seamless integration into Debhelper
 or CDBS, allowing maintainers to easily update config.{guess,sub} files
 in their packages.
Original-Maintainer: Henrique de Moraes Holschuh <[email protected]>
Homepage: https://savannah.gnu.org/projects/config/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 426
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 13ubuntu10.4
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base, usr-is-merged
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.4.10-10ubuntu3)
Pre-Depends: awk
Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~), ubuntu-server (<< 1.453)
Conffiles:
 /etc/debian_version 418bf63c34339f803ffaab19df71f611
 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue 5d0d240fb6f305303afbe168d941cd19
 /etc/issue.net d5ba68e8a13793e68d025c4404f38ecb
 /etc/legal 0110925f6e068836ef2e09356e3651d9
 /etc/lsb-release e47eb02f71c725cc91b34d4d15c3302e
 /etc/profile.d/01-locale-fix.sh 870346d97b16faac4a371b04ffe4cc2f
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text 077515e01cab84009bfa20cf88cb34bc
 /etc/update-motd.d/50-motd-news 54567afa89b3a7983d05ff217fe4a9fd
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <[email protected]>

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 254
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6.3build1
Replaces: base
Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145), libselinux1 (>= 3.1~)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.
Original-Maintainer: Colin Watson <[email protected]>

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1900
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 5.2.21-2ubuntu4
Depends: base-files (>= 2.1.12), debianutils (>= 5.6-0.1)
Pre-Depends: libc6 (>= 2.38), libtinfo6 (>= 6)
Recommends: bash-completion
Suggests: bash-doc
Conffiles:
 /etc/bash.bashrc 3aa8b92d1dd6ddf4daaedc019662f1dc
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc 1f98b8f3f3c8f8927eca945d59dcc1c6
 /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <[email protected]>

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1454
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1:2.11-8
Provides: dh-sequence-bash-completion
Conffiles:
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
 /etc/profile.d/bash_completion.sh 4257431f99f10e5fbe86b39b6b9e5002
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Original-Maintainer: Gabriel F. T. Gomes <[email protected]>
Homepage: https://github.com/scop/bash-completion

Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 213
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.07.1-3ubuntu4
Depends: libc6 (>= 2.38), libreadline8t64 (>= 6.0)
Description: GNU bc arbitrary precision calculator language
 GNU bc is an interactive algebraic language with arbitrary precision which
 follows the POSIX 1003.2 draft standard, with several extensions including
 multi-character variable names, an `else' statement and full Boolean
 expressions.  GNU bc does not require the separate GNU dc program.
Homepage: https://www.gnu.org/software/bc/
Original-Maintainer: Ryan Kavanagh <[email protected]>

Package: bcache-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 106
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.0.8-5build1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libuuid1 (>= 2.16), gawk
Recommends: initramfs-tools | linux-initramfs-tool
Description: bcache userspace tools
 Bcache allows the use of SSDs to cache other block devices.
 .
 Documentation for the run-time interface is included in the kernel tree; in
 Documentation/bcache.txt.
 .
 This package includes udev rules, initramfs support, and the utilities to
 create a new bcache as well as inspect existing bcache partitions.
Homepage: https://bcache.evilpiepirate.org/
Original-Maintainer: David Mohr <[email protected]>

Package: bind9-dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 510
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: bind9
Version: 1:9.18.39-0ubuntu0.24.04.5
Provides: dnsutils
Depends: bind9-host | host, bind9-libs (= 1:9.18.39-0ubuntu0.24.04.5), libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libidn2-0 (>= 2.0.0), libkrb5-3 (>= 1.6.dfsg.2)
Breaks: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Conflicts: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Description: Clients provided with BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers various client programs related to DNS that are
 derived from the BIND 9 source tree.
 .
  - dig - query the DNS in various ways
  - nslookup - the older way to do it
  - nsupdate - perform dynamic updates (See RFC2136)
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <[email protected]>

Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 157
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: bind9
Version: 1:9.18.39-0ubuntu0.24.04.5
Replaces: bind-host (<< 1:9.13.6~)
Provides: host
Depends: bind9-libs (= 1:9.18.39-0ubuntu0.24.04.5), libc6 (>= 2.38), libidn2-0 (>= 2.0.0)
Breaks: bind-host (<< 1:9.13.6~)
Description: DNS Lookup Utility
 This package provides the 'host' DNS lookup utility in the form that
 is bundled with the BIND 9 sources.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <[email protected]>

Package: bind9-libs
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 3443
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.18.39-0ubuntu0.24.04.5
Replaces: bind-libs (<< 1:9.13.6~)
Depends: libuv1t64 (>= 1.40.0), libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libgssapi-krb5-2 (>= 1.17), libjson-c5 (>= 0.15), libkrb5-3 (>= 1.6.dfsg.2), liblmdb0 (>= 0.9.7), libmaxminddb0 (>= 1.3.0), libnghttp2-14 (>= 1.12.0), libssl3t64 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: bind-libs (<< 1:9.13.6~)
Description: Shared Libraries used by BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package contains a bundle of shared libraries used by BIND 9.
Homepage: https://www.isc.org/downloads/bind/
Original-Maintainer: Debian DNS Team <[email protected]>

Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 161
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.42-4ubuntu2.10
Provides: binutils-gold, elf-binutils
Depends: binutils-common (= 2.42-4ubuntu2.10), libbinutils (= 2.42-4ubuntu2.10), binutils-x86-64-linux-gnu (= 2.42-4ubuntu2.10)
Suggests: binutils-doc (>= 2.42-4ubuntu2.10), gprofng-gui
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 564
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.42-4ubuntu2.10
Replaces: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2)
Breaks: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2)
Conffiles:
 /etc/gprofng.rc f941ae51405517b50c5d27f48f3e05d9
Description: Common files for the GNU assembler, linker and binary utilities
 This package contains the localization files used by binutils packages for
 various target architectures and parts of the binutils documentation. It is
 not useful on its own.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11549
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: binutils
Version: 2.42-4ubuntu2.10
Replaces: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2)
Depends: binutils-common (= 2.42-4ubuntu2.10), libbinutils (= 2.42-4ubuntu2.10), libc6 (>= 2.38), libctf-nobfd0 (>= 2.36), libctf0 (>= 2.36), libgcc-s1 (>= 4.2), libgprofng0 (>= 2.41), libjansson4 (>= 2.14), libsframe1 (>= 2.41), libstdc++6 (>= 13.1), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.42-4ubuntu2.10)
Breaks: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2)
Description: GNU binary utilities, for x86-64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: bsdextrautils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 287
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Replaces: bsdmainutils (<< 12.1.3), nwrite
Depends: libc6 (>= 2.38), libsmartcols1 (>= 2.39.1), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3), nwrite
Conflicts: nwrite
Description: extra utilities from 4.4BSD-Lite
 This package contains some extra BSD utilities: col, colcrt, colrm, column,
 hd, hexdump, look, ul and write.
 Other BSD utilities are provided by bsdutils and calendar.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 288
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.39.3-9ubuntu6.5)
Version: 1:2.39.3-9ubuntu6.5
Pre-Depends: libc6 (>= 2.38), libsystemd0
Recommends: bsdextrautils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a Debian
 system: logger, renice, script, scriptlive, scriptreplay and wall. The
 remaining standard BSD utilities are provided by bsdextrautils.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: btrfs-progs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4953
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 6.6.3-1.1build2
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libext2fs2t64 (>= 1.42), liblzo2-2 (>= 2.02), libreiserfscore0t64 (>= 1:3.6.27), libudev1 (>= 183), libuuid1 (>= 2.16), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.0)
Suggests: duperemove
Description: Checksumming Copy on Write Filesystem utilities
 Btrfs is a copy on write filesystem for Linux aimed at implementing
 advanced features while focusing on fault tolerance, repair and easy
 administration.
 .
 This package contains utilities (mkfs, fsck) used to work with btrfs
 and an utility (btrfs-convert) to make a btrfs filesystem from an ext3.
Homepage: http://btrfs.wiki.kernel.org/
Original-Maintainer: Adam Borowski <[email protected]>

Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 17
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 12.10ubuntu1
Depends: libc6-dev | libc-dev, gcc (>= 4:12.3), g++ (>= 4:12.3), make, dpkg-dev (>= 1.17.11)
Description: Informational list of build-essential packages
 If you do not plan to build Debian packages, you don't need this
 package.  Starting with dpkg (>= 1.14.18) this package is required
 for building Debian packages.
 .
 This package contains an informational list of packages which are
 considered essential for building Debian packages.  This package also
 depends on the packages on that list, to make it easy to have the
 build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.
 .
 This package is NOT the definition of what packages are
 build-essential; the real definition is in the Debian Policy Manual.
 This package contains merely an informational list, which is all
 most people need.   However, if this package and the manual disagree,
 the manual is correct.
Original-Maintainer: Matthias Klose <[email protected]>

Package: busybox-initramfs
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 350
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: busybox
Version: 1:1.36.1-6ubuntu3.1
Depends: libc6 (>= 2.38)
Description: Standalone shell setup for initramfs
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-initramfs provides a simple stand alone shell that provides
 only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <[email protected]>

Package: busybox-static
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 2123
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: busybox
Version: 1:1.36.1-6ubuntu3.1
Replaces: busybox
Provides: busybox
Conflicts: busybox
Description: Standalone rescue shell with tons of builtin utilities
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.).  The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-static provides you with a statically linked simple stand alone shell
 that provides all the utilities available in BusyBox. This package is
 intended to be used as a rescue shell, in the event that you screw up your
 system. Invoke "busybox sh" and you have a standalone shell ready to save
 your system from certain destruction. Invoke "busybox", and it will list the
 available builtin commands.
Built-Using: glibc (= 2.39-0ubuntu8.2)
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <[email protected]>

Package: byobu
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 560
Maintainer: Dustin Kirkland <[email protected]>
Architecture: all
Version: 6.11-0ubuntu1
Replaces: bikeshed (<< 1.64), byobu-extras (<< 2.17), screen-profiles (<< 2.0), screen-profiles-extras (<< 2.0)
Provides: byobu-extras, screen-profiles, screen-profiles-extras
Depends: debconf (>= 0.5) | debconf-2.0, python3:any, gettext-base, iproute2, python3, python3-newt, tmux (>= 1.5), gawk
Recommends: less, pastebinit, sensible-utils, run-one
Suggests: apport, ccze, gnome-terminal | xterm, gnupg, lsb-release, po-debconf, screen, speedometer, ttf-ubuntu-font-family (>= 0.80-0ubuntu1~medium), update-notifier-common, vim, wireless-tools
Breaks: bikeshed (<< 1.64), byobu-extras (<< 2.17), screen-profiles (<< 2.0), screen-profiles-extras (<< 2.0)
Enhances: screen
Conffiles:
 /etc/byobu/backend 9f19a0102abedf38ec2174039d0d0d6d
 /etc/byobu/socketdir 774a796c75a097ffd7c5c7492cb39568
 /etc/profile.d/Z97-byobu.sh d3fffff67e2a324cc1111f05cb9cc53b
Description: text window manager, shell multiplexer, integrated DevOps environment
 Byobu is Ubuntu's powerful text-based window manager, shell multiplexer, and
 integrated DevOps environment.
 .
 Using Byobu, you can quickly create and move between different windows
 over a single SSH connection or TTY terminal, split each of those windows into
 multiple panes, monitor dozens of important statistics about your system,
 detach and reattach to sessions later while your programs continue to run in
 the background.
Homepage: https://byobu.org

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 109
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.8-5.1build0.1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-5.1build0.1), libc6 (>= 2.34)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>
Homepage: https://sourceware.org/bzip2/

Package: bzip2-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 597
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: bzip2
Version: 1.0.8-5.1build0.1
Replaces: bzip2 (<< 1.0.4-0ubuntu2)
Description: high-quality block-sorting file compressor - documentation
 This package contains the bzip2 user manual in HTML, PDF, PS and Texinfo
 formats.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>
Homepage: https://sourceware.org/bzip2/

Package: ca-certificates
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 386
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 20240203
Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.
Original-Maintainer: Julien Cristau <[email protected]>

Package: comerr-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 148
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.0-2.4~exp1ubuntu4.1)
Version: 2.1-1.47.0-2.4~exp1ubuntu4.1
Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3)
Depends: libc6-dev | libc-dev, libcom-err2 (= 1.47.0-2.4~exp1ubuntu4.1)
Suggests: doc-base
Description: common error description library - headers and static libraries
 libcom_err is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
 .
 This package contains the development environment for the com_err library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: command-not-found
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 29
Maintainer: Michael Vogt <[email protected]>
Architecture: all
Version: 23.04.0
Depends: python3-commandnotfound (= 23.04.0)
Suggests: snapd
Conffiles:
 /etc/apt/apt.conf.d/50command-not-found 9bf399a111915919e5c6952f64a6f5eb
 /etc/zsh_command_not_found 81c5c243d61731a56db6670038bf8509
Description: Suggest installation of packages in interactive bash sessions
 This package will install a handler for command_not_found that looks up
 programs not currently installed but available from the repositories.
Original-Maintainer: Zygmunt Krynicki <[email protected]>

Package: console-setup
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 431
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.226ubuntu1
Depends: console-setup-linux | console-setup-freebsd | hurd, xkb-data (>= 0.9), keyboard-configuration (= 1.226ubuntu1), debconf (>= 0.5) | debconf-2.0
Pre-Depends: debconf | debconf-2.0
Suggests: lsb-base (>= 3.0-6), locales
Breaks: lsb (<< 2.0-6), lsb-base (<< 3.0-6), lsb-core (<< 2.0-6)
Conflicts: console-setup-mini
Description: console font and keymap setup program
 This package provides the console with the same keyboard
 configuration scheme as the X Window System. As a result, there is no
 need to duplicate or change the keyboard files just to make simple
 customizations such as the use of dead keys, the key functioning as
 AltGr or Compose key, the key(s) to switch between Latin and
 non-Latin mode, etc.
 .
 The package also installs console fonts supporting many of the
 world's languages.  It provides an unified set of font faces - the
 classic VGA, the simplistic Fixed, and the cleaned Terminus,
 TerminusBold and TerminusBoldVGA.
Original-Maintainer: Debian Install System Team <[email protected]>

Package: console-setup-linux
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2202
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.226ubuntu1
Replaces: console-setup (<< 1.71), console-terminus
Provides: console-terminus
Depends: kbd (>= 0.99-12) | console-tools (>= 1:0.2.3-16), keyboard-configuration (= 1.226ubuntu1), init-system-helpers (>= 1.29~) | initscripts
Suggests: console-setup
Breaks: console-cyrillic (<= 0.9-11), console-setup (<< 1.71), console-terminus
Conflicts: console-setup-freebsd
Conffiles:
 /etc/console-setup/compose.ARMSCII-8.inc fef36b61fb8b1cacc151ad3db127f777
 /etc/console-setup/compose.CP1251.inc fef88d8c8dd4c726498003fd3cd84a7f
 /etc/console-setup/compose.CP1255.inc c972a2e90938657e97b643366b98b2ed
 /etc/console-setup/compose.CP1256.inc 5ea5e4d41da7a88f742863810e86144b
 /etc/console-setup/compose.GEORGIAN-ACADEMY.inc b6d80f40abff7e8af236796ebaca0247
 /etc/console-setup/compose.GEORGIAN-PS.inc cf45272b6bf35a22223b132600dc36c3
 /etc/console-setup/compose.IBM1133.inc a31102602f7e7cab9738022b6c5469ae
 /etc/console-setup/compose.ISIRI-3342.inc 5ada7fbba750192f11fa238add232ba9
 /etc/console-setup/compose.ISO-8859-1.inc f22c32b3b801b60434016c975b5fb66e
 /etc/console-setup/compose.ISO-8859-10.inc e5fce59617c839b56574c9e323d34686
 /etc/console-setup/compose.ISO-8859-11.inc ad2f3cc7ee64602a790bad8a2a989243
 /etc/console-setup/compose.ISO-8859-13.inc abbb4fb36d084295075305e33195bd4a
 /etc/console-setup/compose.ISO-8859-14.inc 3a7519688a9cee5d5f90a5f74b854490
 /etc/console-setup/compose.ISO-8859-15.inc 6fd4b1ba84bb627815f6119440e84906
 /etc/console-setup/compose.ISO-8859-16.inc 8245c19b5262d8d23ca856587739eb20
 /etc/console-setup/compose.ISO-8859-2.inc cd59fdcc7891012d905cdafd3704144a
 /etc/console-setup/compose.ISO-8859-3.inc 904839fe56359e4822667d241c131f3a
 /etc/console-setup/compose.ISO-8859-4.inc 414ddf28bfcc94a43191b134e264dfdd
 /etc/console-setup/compose.ISO-8859-5.inc f861a4b0403490677e6d400f2d7129da
 /etc/console-setup/compose.ISO-8859-6.inc 41ea36ea1c1a1c0c9bebdf0016395e1f
 /etc/console-setup/compose.ISO-8859-7.inc 83ee498d8b5eba5ce8ba593b3036f832
 /etc/console-setup/compose.ISO-8859-8.inc 9cceaa9f3312f89aba371d3c893f4e7b
 /etc/console-setup/compose.ISO-8859-9.inc 2df0be84482af83b9d3e124e9ea37513
 /etc/console-setup/compose.KOI8-R.inc b6a49ca842c8002b4e3de916f98d180e
 /etc/console-setup/compose.KOI8-U.inc d59865b46fcb821935da42feb335c1c5
 /etc/console-setup/compose.TIS-620.inc 31b73af83ef3993c128e2b983b9eaf89
 /etc/console-setup/compose.VISCII.inc edf0e2f7abd0de5184ba5c6d27939af6
 /etc/console-setup/remap.inc b72cfe32ffa93987f74c5cec9ac180fd
 /etc/console-setup/vtrgb 1fb3c13c4fcfa8cc4131aba905df559e
 /etc/console-setup/vtrgb.vga 302837772c14006c7956211e184acfbd
 /etc/init.d/console-setup.sh 6d5b1d0c7a12da4e4f70836fe3fec827
 /etc/init.d/keyboard-setup.sh 5746e83ec4ca1bda09967a00fe9266fb
Description: Linux specific part of console-setup
 This package includes fonts in psf format and definitions of various
 8-bit charmaps.
Original-Maintainer: Debian Install System Team <[email protected]>

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 6944
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 9.4-3ubuntu6.2
Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.48), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0)
Breaks: usrmerge (<< 39)
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <[email protected]>

Package: cpg-clamav-libs
Status: install ok installed
Priority: optional
Section: default
Installed-Size: 9227
Maintainer: [email protected]
Architecture: amd64
Version: 1.0
Description: OPSSHIELD custom ClamAV package
License: unknown
Vendor: OPSSHIELD LLP
Homepage: https://www.opsshield.com

Package: cpg-nginx
Status: install ok installed
Priority: optional
Section: default
Installed-Size: 4379
Maintainer: [email protected]
Architecture: amd64
Version: 1.26.1
Description: OPSSHIELD custom Nginx package
License: unknown
Vendor: OPSSHIELD LLP
Homepage: https://www.opsshield.com

Package: cpg-php-fpm
Status: install ok installed
Priority: optional
Section: default
Installed-Size: 188590
Maintainer: [email protected]
Architecture: amd64
Version: 8.1.29
Depends: openssl, curl
Description: OPSSHIELD custom PHP package
License: unknown
Vendor: OPSSHIELD LLP
Homepage: https://www.opsshield.com

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 328
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.15+dfsg-1ubuntu2
Replaces: cpio-mt
Depends: libc6 (>= 2.38)
Suggests: libarchive-dev
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: https://www.gnu.org/software/cpio/
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>

Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 37
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.214ubuntu1)
Version: 4:13.2.0-7ubuntu1
Depends: cpp-13 (>= 13.2.0-11~), cpp-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3), gcc (<< 4:13.2.0-3)
Description: GNU C preprocessor (cpp)
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
 .
 This is a dependency package providing the default GNU C preprocessor.
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: cpp-13
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 11
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Depends: gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), cpp-13-x86-64-linux-gnu (= 13.3.0-6ubuntu2~24.04.1)
Suggests: gcc-13-locales (>= 13)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: cpp-13-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 30807
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Replaces: cpp-13 (<< 13.2.0-11)
Depends: gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: gcc-13-locales (>= 13), cpp-13-doc (>= 13)
Breaks: cpp-13 (<< 13.2.0-11), hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor for x86_64-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for x86_64-linux-gnu architecture but not
 the compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: cpp-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 20
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-defaults (1.214ubuntu1)
Version: 4:13.2.0-7ubuntu1
Replaces: cpp (<< 4:13.2.0-3)
Depends: cpp-13-x86-64-linux-gnu (>= 13.2.0-11~)
Suggests: cpp-doc
Breaks: cpp (<< 4:13.2.0-3)
Description: GNU C preprocessor (cpp) for the amd64 architecture
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the cross-compiler for amd64 architecture.
 .
 This is a dependency package providing the default GNU C preprocessor
 for the amd64 architecture.
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 230
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0pl1-184ubuntu2
Replaces: bcron, cronie, systemd-cron
Provides: cron-daemon
Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), sensible-utils, libpam-runtime
Pre-Depends: init-system-helpers (>= 1.54~), cron-daemon-common
Suggests: anacron, logrotate, checksecurity, supercat, default-mta | mail-transport-agent
Conflicts: bcron, cronie, systemd-cron
Conffiles:
 /etc/default/cron bc9ab63f9e143d7338909d50494d552f
 /etc/init.d/cron 36fb1d99878caaafe31e6397b4519323
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
 /etc/supercat/spcrc-crontab f4a36df1ac8298dc249f712026bafff8
 /etc/supercat/spcrc-crontab-light ed8b59882050d7de508a1eab088734e9
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: https://ftp.isc.org/isc/cron/
Original-Maintainer: Georges Khaznadar <[email protected]>

Package: cron-daemon-common
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 50
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: cron
Version: 3.0pl1-184ubuntu2
Replaces: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, adduser
Breaks: systemd-cron (<< 1.15.19-5~)
Conflicts: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.yearly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 85f7ff2020ac8c72212f076ddf33c0be
Description: process scheduling daemon's configuration files
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 This package provides configuration files which must be there to
 define scheduled process sets.
Homepage: https://ftp.isc.org/isc/cron/
Original-Maintainer: Georges Khaznadar <[email protected]>

Package: cryptsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 430
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2:2.7.0-1ubuntu4.2
Depends: cryptsetup-bin (>= 2:1.6.0), dmsetup, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34)
Recommends: cryptsetup-initramfs
Suggests: dosfstools, keyutils, liblocale-gettext-perl
Conffiles:
 /etc/default/cryptdisks 3e3b2248193105b5ecd9456c01ef3736
 /etc/init.d/cryptdisks 8dd64a17dcefb1dd1a60eec286a6b502
 /etc/init.d/cryptdisks-early 9c68271b34d88afd2764cdb203af9bd1
Description: disk encryption support - startup scripts
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 Cryptsetup is backwards compatible with the on-disk format of cryptoloop,
 but also supports more secure formats. This package includes support for
 automatically configuring encrypted devices at boot time via the config
 file /etc/crypttab. Additional features are cryptoroot support through
 initramfs-tools and several supported ways to read a passphrase or key.
 .
 This package provides the cryptdisks_start and _stop wrappers, as well as
 luksformat.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <[email protected]>

Package: cryptsetup-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 604
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: cryptsetup
Version: 2:2.7.0-1ubuntu4.2
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.38), libcryptsetup12 (>= 2:2.7), libpopt0 (>= 1.14), libuuid1 (>= 2.16)
Description: disk encryption support - command line tools
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the cryptsetup, integritysetup and veritysetup
 utilities.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <[email protected]>

Package: cryptsetup-initramfs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 110
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: cryptsetup
Version: 2:2.7.0-1ubuntu4.2
Replaces: cryptsetup (<< 2:2.0.3-1)
Depends: busybox-initramfs, cryptsetup (>= 2:2.7.0-1ubuntu4.2), initramfs-tools (>= 0.137) | linux-initramfs-tool, debconf (>= 0.5) | debconf-2.0
Recommends: console-setup, kbd, plymouth
Breaks: cryptsetup (<< 2:2.0.3-1)
Conflicts: lvm2 (<< 2.03.15-1)
Conffiles:
 /etc/cryptsetup-initramfs/conf-hook 9a127a9edfca239740eba9197b0b901f
Description: disk encryption support - initramfs integration
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides initramfs integration for cryptsetup.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <[email protected]>

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 522
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 8.5.0-2ubuntu10.9
Depends: libc6 (>= 2.34), libcurl4t64 (= 8.5.0-2ubuntu10.9), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: https://curl.se/
Original-Maintainer: Debian Curl Maintainers <[email protected]>

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 187
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 0.5.12-6ubuntu5
Depends: debianutils (>= 5.6-0.1), dpkg (>= 1.19.1)
Pre-Depends: libc6 (>= 2.38)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Original-Maintainer: Andrej Shadura <[email protected]>

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 167
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.14.10-4ubuntu4.1
Provides: dbus-system-bus (= 1.14.10-4ubuntu4.1), default-dbus-system-bus
Depends: dbus-bin (= 1.14.10-4ubuntu4.1), dbus-daemon (= 1.14.10-4ubuntu4.1), dbus-system-bus-common (>= 1.14.10-4ubuntu4.1), libc6 (>= 2.34), libdbus-1-3 (= 1.14.10-4ubuntu4.1), libexpat1 (>= 2.1~beta3), libsystemd0
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1
Description: simple interprocess messaging system (system message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package provides a fully-functional D-Bus system bus with activation
 support, used for communication between system services, and depends on
 most of the other components of the reference implementation of D-Bus.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: dbus-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 215
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-4ubuntu4.1
Replaces: dbus (<< 1.13.18-2~)
Depends: libc6 (>= 2.38), libdbus-1-3 (= 1.14.10-4ubuntu4.1)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (command line utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the D-Bus command-line utilities such as dbus-send
 and dbus-monitor.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: dbus-daemon
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 369
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-4ubuntu4.1
Replaces: dbus (<< 1.13.18-2~)
Depends: dbus-bin (= 1.14.10-4ubuntu4.1), dbus-session-bus-common (>= 1.14.10-4ubuntu4.1), libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.14.10-4ubuntu4.1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (reference message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains dbus-daemon, the reference implementation of a
 D-Bus message bus, and dbus-run-session, a utility to start a temporary
 session dbus-daemon in a constrained environment or for automated tests.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: dbus-session-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 109
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-4ubuntu4.1
Replaces: dbus (<< 1.13.18-2~)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (session bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus session bus, used for applications and per-user services.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: dbus-system-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 120
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-4ubuntu4.1
Replaces: dbus (<< 1.13.18-2~)
Depends: adduser
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (system bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus system bus, used for system services such as networking and
 storage management services. It is also responsible for creating the
 'messagebus' system user account used to run the system bus.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus system bus, install one of the packages
 that implement the dbus-system-bus virtual package, such as dbus.
 The recommended implementation is indicated by the default-dbus-system-bus
 virtual package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: dbus-user-session
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 113
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-4ubuntu4.1
Provides: dbus-session-bus, default-dbus-session-bus
Depends: dbus-daemon (= 1.14.10-4ubuntu4.1) | dbus-broker, dbus-session-bus-common (>= 1.14.10-4ubuntu4.1), libpam-systemd, systemd
Recommends: systemd-sysv
Conffiles:
 /etc/X11/Xsession.d/20dbus_xdg-runtime f11c70d9f51a152cedf939d36ef038bf
Description: simple interprocess messaging system (systemd --user integration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: dconf-gsettings-backend
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dconf
Version: 0.40.0-4ubuntu0.1
Provides: gsettings-backend
Depends: dconf-service (<< 0.40.0-4ubuntu0.1.1~), dconf-service (>= 0.40.0-4ubuntu0.1), libdconf1 (= 0.40.0-4ubuntu0.1), libc6 (>= 2.4), libglib2.0-0t64 (>= 2.79.0)
Description: simple configuration storage system - GSettings back-end
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains a back-end for GSettings. It is needed by
 applications accessing settings through GSettings to set custom values
 and listen for changes.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: dconf-service
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: dconf
Version: 0.40.0-4ubuntu0.1
Depends: default-dbus-session-bus | dbus-session-bus, libdconf1 (= 0.40.0-4ubuntu0.1), procps, libc6 (>= 2.34), libglib2.0-0t64 (>= 2.79.0)
Recommends: dconf-gsettings-backend
Description: simple configuration storage system - D-Bus service
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains the DConf service, which applications talk to
 using D-Bus in order to obtain their settings. It is mostly used by the
 GSettings backend.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 493
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.5.86ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Recommends: apt-utils, debconf-i18n
Suggests: debconf-doc, debconf-kde-helper, debconf-utils, libgtk3-perl, libnet-ldap-perl, libterm-readline-gnu-perl, perl, whiptail | dialog
Conflicts: debconf-tiny, whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 1cd82ead5651f0753b1ff6d9b31bd235
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <[email protected]>

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: localization
Installed-Size: 794
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: debconf
Version: 1.5.86ubuntu1
Depends: debconf (= 1.5.86ubuntu1), liblocale-gettext-perl, libtext-charwidth-perl, libtext-iconv-perl, libtext-wrapi18n-perl
Conflicts: debconf-english
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.
Original-Maintainer: Debconf Developers <[email protected]>

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 224
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 5.17build1
Pre-Depends: libc6 (>= 2.38)
Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 update-shells which
Original-Maintainer: Ileana Dumitrescu <[email protected]>

Package: dhcpcd-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 514
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: dhcpcd
Version: 1:10.0.6-1ubuntu3.2
Replaces: dhcpcd5 (<< 1:10.0.6-1ubuntu3.2)
Provides: dhcp-client
Depends: adduser, libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libudev1 (>= 183)
Suggests: resolvconf | openresolv | systemd-resolved
Breaks: dhcpcd5 (<< 1:10.0.6-1ubuntu3.2)
Conffiles:
 /etc/dhcpcd.conf a4fa1b59d13b8f5590306a4a8c8f995c
Description: DHCPv4 and DHCPv6 dual-stack client (binaries and exit hooks)
 dhcpcd provides seamless IPv4 and IPv6 auto-configuration:
  * DHCPv4 client
  * DHCPv6 client with Prefix Delegation (PD) support
  * IPv4 LL support (ZeroConf)
  * IPv6 SLAAC support
  * ARP address conflict resolution
  * ARP ping profiles
  * Wireless SSID profiles
 .
 This package provides the binaries, exit hooks and manual pages.
 .
 It offers a dual-stack substitute for ISC DHCP Client (dhclient) on systems
 where interfaces are configured by ifupdown via </etc/network/interfaces>
 using the DHCP method.
 .
 The init.d script and systemd service required for systems without ifupdown
 are packaged separately as dhcpcd.
 .
 Since Debian 12 (Bookworm), dhcpcd uses Predictable Network Interface Names
 on Linux ports. See NEWS.Debian for more details.
Homepage: https://roy.marples.name/projects/dhcpcd
Original-Maintainer: Martin-Éric Racine <[email protected]>

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 452
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1:3.10-1build1
Replaces: diff
Pre-Depends: libc6 (>= 2.38)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: https://www.gnu.org/software/diffutils/
Original-Maintainer: Santiago Vila <[email protected]>

Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 709
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Depends: adduser, gpgconf (= 2.4.4-2ubuntu17.4), init-system-helpers (>= 1.52), libassuan0 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libgnutls30t64 (>= 3.8.1), libgpg-error0 (>= 1.46), libksba8 (>= 1.6.3), libldap2 (>= 2.6.2), libnpth0t64 (>= 0.90)
Suggests: gnupg (= 2.4.4-2ubuntu17.4), dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using Tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.  Unless this package is installed, the parts of
 the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: distro-info
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 78
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.7build1
Depends: distro-info-data (>= 0.59~), libc6 (>= 2.34)
Suggests: shunit2
Description: provides information about the distributions' releases
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
Original-Maintainer: Benjamin Drung <[email protected]>

Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 18
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.60ubuntu0.6
Breaks: distro-info (<< 1.0~)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.
Original-Maintainer: Benjamin Drung <[email protected]>

Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 227
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: lvm2 (2.03.16-3ubuntu3.2)
Version: 2:1.02.185-3ubuntu3.2
Depends: libc6 (>= 2.38), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.110), liblvm2cmd2.03 (>= 2.03.16)
Description: Linux Kernel Device Mapper event daemon
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a daemon to monitor events of devmapper devices.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <[email protected]>

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 228
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5-3ubuntu0.1
Depends: libc6 (>= 2.34)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://nongnu.org/dmidecode/
Original-Maintainer: Jörg Frings-Fürst <[email protected]>

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 253
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.03.16-3ubuntu3.2)
Version: 2:1.02.185-3ubuntu3.2
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.181)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <[email protected]>

Package: dns-root-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 19
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2024071801~ubuntu0.24.04.1
Description: DNS root hints and DNSSEC trust anchor
 This package contains various root zone related data as published
 by IANA to be used by various DNS software as a common source
 of DNS root zone data, namely:
 .
  * Root Hints (root.hints)
  * Root Trust Anchors (root.key, root.ds)
Homepage: https://data.iana.org/root-anchors/
Original-Maintainer: dns-root-data packagers <[email protected]>

Package: dosfstools
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 232
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.2-1.1build1
Depends: libc6 (>= 2.38)
Description: utilities for making and checking MS-DOS FAT filesystems
 The dosfstools package includes the mkfs.fat and fsck.fat utilities, which
 respectively make and check MS-DOS FAT filesystems.
Homepage: https://github.com/dosfstools/dosfstools
Original-Maintainer: Andreas Bombe <[email protected]>

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6238
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.22.6ubuntu6.6
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.38), liblzma5 (>= 5.4.0), libmd0 (>= 0.0.0), libselinux1 (>= 3.1~), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300)
Conffiles:
 /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
 /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <[email protected]>

Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1721
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.22.6ubuntu6.6
Provides: dpkg-build-api (= 0), dpkg-build-api (= 1)
Depends: perl:any, libdpkg-perl (= 1.22.6ubuntu6.6), tar (>= 1.28-1), bzip2, xz-utils (>= 5.4.0), patch (>= 2.7), make, binutils, lto-disabled-list
Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg | sq | sqop | pgpainless-cli | sequoia-chameleon-gnupg, gpgv | sq | sqop | pgpainless-cli | sequoia-chameleon-gnupg, libalgorithm-merge-perl
Suggests: debian-keyring
Breaks: debhelper (<< 10.10.1~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), sq (<< 0.33.0~), sqop (<< 0.27.2~)
Conffiles:
 /etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
 /etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
 This package provides the development tools (including dpkg-source)
 required to unpack, build and upload Debian source packages.
 .
 Most Debian source packages will require additional tools to build;
 for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <[email protected]>

Package: dracut-install
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 87
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: dracut
Version: 060+5-1ubuntu3.3
Replaces: dracut-core (<< 059-5~)
Depends: libc6 (>= 2.38), libkmod2 (>= 22~)
Breaks: dracut-core (<< 059-5~)
Description: dracut is an event driven initramfs infrastructure (dracut-install)
 This package just contains the dracut-install command to be used by
 initramfs generating tools.
Homepage: https://github.com/dracutdevs/dracut/wiki/
Original-Maintainer: Thomas Lange <[email protected]>

Package: e2fsprogs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1504
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.47.0-2.4~exp1ubuntu4.1
Depends: logsave
Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libext2fs2t64 (= 1.47.0-2.4~exp1ubuntu4.1), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
 /etc/cron.d/e2scrub_all bc533e09f3b3d96bfe1633ad57eb7026
 /etc/e2scrub.conf df38534cc670c70a91cf9b035845d244
 /etc/mke2fs.conf 6e57073b9789a67a66b4681739445a38
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: e2fsprogs-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: e2fsprogs
Version: 1.47.0-2.4~exp1ubuntu4.1
Replaces: e2fsprogs (<< 1.43.5-1)
Depends: e2fsprogs (>= 1.47.0-2.4~exp1ubuntu4.1), e2fsprogs (<< 1.47.0-2.4~exp1ubuntu4.1+c~)
Description: ext2/ext3/ext4 file system utilities - translations
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides translations for messages for programs found in
 the 'e2fsprogs' package.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: ecp-core
Status: install ok installed
Priority: optional
Installed-Size: 103798
Maintainer: Enhance Ltd <[email protected]>
Architecture: amd64
Version: 12.21.6
Replaces: appcd
Depends: cron, curl, ecp-php56, ecp-php70, ecp-php71, ecp-php72, ecp-php73, ecp-php74, ecp-php80, ecp-php81, ecp-php82, ecp-php83, ecp-php84, ecp-php85, git, libc6 (>= 2.34), libc6 (>= 2.38), libc6 (>= 2.39), libmilter1.0.1 (>= 8.14.1), libnss3-dev, libpam0g (>= 0.99.7.1), libssl3t64 (>= 3.0.0), linux-image-extra-virtual, openssh-server, openssl, quota, rsync, ufw, zlib1g (>= 1:1.1.4)
Conflicts: appcd
Conffiles:
 /etc/pam.d/sshd.enhancecp f798fc8dd948bc9ca998cbe0c17f05f8
 /etc/pam.d/su.enhancecp 99ec8ca4f3ac0d04b97ac73ca06a1902
 /etc/pam.d/cron.enhancecp 5c3ae667f103c4c36a688a4ec67a5c04
 /etc/ufw/before.rules.enhance c8058f6fe1f7fc29506aaf109a1198c4
 /etc/ufw/sysctl.conf.enhance bcbb151c4a1b8e4bf463ba13c638e880
 /etc/modsecurity.d/unicode.mapping 5c1fb5a8d70c19866dcc4d2084ecc952
 /etc/apache2/apache2.conf.enhance aca45fa78845c41d17821237b78ef3b1
 /etc/nginx/nginx.conf.enhance f78ef149a4c4883a51113a03c6b41780
 /etc/pure-ftpd/conf/DontResolve a6105c0a611b41b08f1209506350279e
 /etc/pure-ftpd/conf/PassivePortRange 0f0f768c32f43d398384930a7de7fd3a
 /etc/powerdns/pdns.d/dnssec.conf 9523f4cc9ea74b4d3001192997d44005
 /etc/systemd/system/lshttpd.service.d/override.conf c24bb0c7d98ff878fa97004f43eed135
 /etc/systemd/system/apache2.service.d/override.conf 7413e332b27f2d415bdc92c0e39c2f5c
 /etc/dovecot/enhance-dovecot-auth.lua 13a99dea80d4cab6636046b4b9d8f8bd
 /etc/apt/trusted.gpg.d/mysql.gpg 68d75f44e5f72cce0f9dfe99935a0098 obsolete
Description: [generated from Rust crate appcd]

Package: ecp-filerd
Status: install ok installed
Priority: optional
Installed-Size: 12985
Maintainer: Enhance Ltd <[email protected]>
Architecture: amd64
Version: 12.21.6
Replaces: appcd
Depends: ecp-core, libc6 (>= 2.39), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Conflicts: appcd
Description: [generated from Rust crate filerd]

Package: ecp-openssl-legacy
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 1.1.1
Description: PHP Package

Package: ecp-php56
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 5.6.40
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php70
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 7.0.33
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php71
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 7.1.33
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php72
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 7.2.34
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php73
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 7.3.33
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php74
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 7.4.33
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php80
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 8.0.30
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php81
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 8.1.34
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, libpq-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php82
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 8.2.30
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, libpq-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php83
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 8.3.30
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, libpq-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php84
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 8.4.19
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, libpq-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ecp-php85
Status: install ok installed
Maintainer: Enhance
Architecture: amd64
Version: 8.5.4
Depends: libtidy-dev, libxml2-dev, libsqlite3-dev, curl, zlib1g-dev, openssl, libedit-dev, libonig5, libssl-dev, libsodium-dev, libargon2-dev, libonig-dev, zlib1g-dev, imagemagick, libxslt-dev, gettext, libgd-dev, libicu-dev, libzip-dev, zip, unzip, strace, webp, libc-client-dev, libkrb5-dev, libgmp3-dev, ffmpeg, libldap2-dev, libsasl2-dev, redis, redis-server, libmcrypt-dev, zstd, freetds-dev, libsybdb5, libavif-dev, libpcre3-dev, libpq-dev, ecp-openssl-legacy
Conflicts: php
Description: PHP Package

Package: ed
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 108
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.20.1-1
Depends: libc6 (>= 2.34)
Description: classic UNIX line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.
Original-Maintainer: Martin Zobel-Helas <[email protected]>
Homepage: https://www.gnu.org/software/ed/

Package: efibootmgr
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 92
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 18-1build2
Depends: libc6 (>= 2.38), libefiboot1t64 (>= 38), libefivar1t64 (>= 38), libpopt0 (>= 1.14)
Description: Interact with the EFI Boot Manager
 This is a Linux user-space application to modify the Intel Extensible
 Firmware Interface (EFI) Boot Manager configuration. This application can
 create and destroy boot entries, change the boot order, change the next
 running boot option, and more.
 .
 Additional information about (U)EFI can be found at http://www.uefi.org/.
 .
 Note: efibootmgr requires that the kernel module efivars be loaded prior
 to use. 'modprobe efivars' should do the trick if it does not
 automatically load.
Original-Maintainer: Debian UEFI Maintainers <[email protected]>

Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 734
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1:6.7-1build1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Conffiles:
 /etc/network/if-pre-up.d/ethtool 09b4a447e5048a4ea0bc34732bd0278c
 /etc/network/if-up.d/ethtool a522a7b2b1d3e2d9a06e9690674a5d38
Description: display or change Ethernet device settings
 ethtool can be used to query and change settings such as speed, auto-
 negotiation and checksum offload on many network devices, especially
 Ethernet devices.
Homepage: https://www.kernel.org/pub/software/network/ethtool/
Original-Maintainer: Debian Kernel Team <[email protected]>

Package: fail2ban
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2090
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 1.0.2-3ubuntu0.1
Depends: python3:any, python3-systemd, python3-setuptools, python3-pyasyncore
Recommends: nftables | iptables, whois, python3-pyinotify
Suggests: mailx, system-log-daemon, monit, sqlite3
Conffiles:
 /etc/default/fail2ban 66c59a6c990607ec771dbecfa8d9bc8f
 /etc/fail2ban/action.d/abuseipdb.conf 6de77158aef873b4f3278b922a4718c1
 /etc/fail2ban/action.d/apf.conf ff489332ad817434ff9f924deed6b1fc
 /etc/fail2ban/action.d/apprise.conf 8a59ac41cb6db7521bf06c4a28161fd9
 /etc/fail2ban/action.d/blocklist_de.conf 444ac9d25936928883470eb138b2aa62
 /etc/fail2ban/action.d/bsd-ipfw.conf c99b2da81311c839423c17bae185e828
 /etc/fail2ban/action.d/cloudflare-token.conf d0324f870fde7b3d38894e9e7aa0c729
 /etc/fail2ban/action.d/cloudflare.conf 8ca752e8183bfeb7b50439cb838d9ef0
 /etc/fail2ban/action.d/complain.conf dc9fc26b61211a5feeca1ecd6593a80b
 /etc/fail2ban/action.d/dshield.conf 4977ae209a571ea51000c62136222e29
 /etc/fail2ban/action.d/dummy.conf 7ccd65d6d122d146afd070d4b8d3fe13
 /etc/fail2ban/action.d/firewallcmd-allports.conf cd29d18a85b730acb6243f2c9c682564
 /etc/fail2ban/action.d/firewallcmd-common.conf c151aca3c29ae6b05abaefa109aca137
 /etc/fail2ban/action.d/firewallcmd-ipset.conf dc2001254336da8f4361832e48b89a26
 /etc/fail2ban/action.d/firewallcmd-multiport.conf 3073384d28e61285d100d844b23732f2
 /etc/fail2ban/action.d/firewallcmd-new.conf df128e6fe60c02dbbb923b0d03d4b9b0
 /etc/fail2ban/action.d/firewallcmd-rich-logging.conf 8b03ce848766a4f069886e5ee31ecbe7
 /etc/fail2ban/action.d/firewallcmd-rich-rules.conf a292029b68d9dc71f7d8180eb04aab9c
 /etc/fail2ban/action.d/helpers-common.conf d1957c2ea8ad3f3a7bb029781c469eea
 /etc/fail2ban/action.d/hostsdeny.conf 69ed0f6e2bd952c41a38d1158d86d348
 /etc/fail2ban/action.d/ipfilter.conf a0a9cead3b3d53d2fa6b7ff57b36c9ac
 /etc/fail2ban/action.d/ipfw.conf e7a0d606e6bebb32b502204d33b6acb3
 /etc/fail2ban/action.d/iptables-allports.conf c24252cd1e408a9b824beb0dd1770253
 /etc/fail2ban/action.d/iptables-ipset-proto4.conf dbc395467d9930d047ffb89b5fb20ed6
 /etc/fail2ban/action.d/iptables-ipset-proto6-allports.conf 4bc2553f08fdd9fd96ff946ede0243f6
 /etc/fail2ban/action.d/iptables-ipset-proto6.conf 25340aed69f3390e25938d432e879738
 /etc/fail2ban/action.d/iptables-ipset.conf e3d7b1b23b48919045c7d44e838f7a61
 /etc/fail2ban/action.d/iptables-multiport-log.conf 15a57a32e8d171b4ed36e4871425d899
 /etc/fail2ban/action.d/iptables-multiport.conf 0d5435062f6ffb2c3c70ebb2e8ff89a9
 /etc/fail2ban/action.d/iptables-new.conf 891fb96f61fcdad1a0a9c3b6a53e3b54
 /etc/fail2ban/action.d/iptables-xt_recent-echo.conf 8b7ae4a68949128f8715d322e880888d
 /etc/fail2ban/action.d/iptables.conf cb4722b8663d168b43b41089928f66e9
 /etc/fail2ban/action.d/ipthreat.conf 1431bac75b3e1bdf01250aa24dc99489
 /etc/fail2ban/action.d/mail-buffered.conf dcc6469bc7a89b724f85dc9833c1a177
 /etc/fail2ban/action.d/mail-whois-common.conf 59648a28f1c3e91fd5aceeb4e94eb625
 /etc/fail2ban/action.d/mail-whois-lines.conf 485526275886884303ed78c487ff6dc4
 /etc/fail2ban/action.d/mail-whois.conf 79a789f89810509a19d1f9971e8bef8b
 /etc/fail2ban/action.d/mail.conf 0454b60c46c25f86137fb217a7b0b581
 /etc/fail2ban/action.d/mynetwatchman.conf f8a1122fd899abe1116b7cc087e6c04a
 /etc/fail2ban/action.d/netscaler.conf 1c782bbb8f755eb011622bf0092fc22a
 /etc/fail2ban/action.d/nftables-allports.conf c33bbf43efdb06cf65443b7f8fccc494
 /etc/fail2ban/action.d/nftables-multiport.conf 2ead09f300d009bd68b20a1b36033206
 /etc/fail2ban/action.d/nftables.conf 029a2b05f919060794cbf2af3fd1a28d
 /etc/fail2ban/action.d/nginx-block-map.conf d4b31af42a4cc9dc359517899e0b061e
 /etc/fail2ban/action.d/npf.conf f43b7cdab630da59256f5b345ba32f03
 /etc/fail2ban/action.d/nsupdate.conf c802245838c79120cee7bff4f9cea4b3
 /etc/fail2ban/action.d/osx-afctl.conf 94b91b8678abdc53828e51f67a10d1a4
 /etc/fail2ban/action.d/osx-ipfw.conf d66e4088a7fac069d6af6aaf99dae2b4
 /etc/fail2ban/action.d/pf.conf d1fa96edf3e5e07bc6ffa396cb8474aa
 /etc/fail2ban/action.d/route.conf 435129bb799264371fa14896444d756e
 /etc/fail2ban/action.d/sendmail-buffered.conf 80b1125dd43790e59b3cd337197e8395
 /etc/fail2ban/action.d/sendmail-common.conf ff6c98c7d50ac417b5f7b850e2b25075
 /etc/fail2ban/action.d/sendmail-geoip-lines.conf d6eba5a6020da3326de48efdec608a20
 /etc/fail2ban/action.d/sendmail-whois-ipjailmatches.conf ec487366cde6963e09f67d3f9a23840d
 /etc/fail2ban/action.d/sendmail-whois-ipmatches.conf ae565c368bd26a51f3da8134b3830ef8
 /etc/fail2ban/action.d/sendmail-whois-lines.conf 377adfd550d876d93b086b04104fb549
 /etc/fail2ban/action.d/sendmail-whois-matches.conf cab221329a27f5c8dd82ce7f064fe48f
 /etc/fail2ban/action.d/sendmail-whois.conf 8fedeefaf04d181db3fbd6f271542b57
 /etc/fail2ban/action.d/sendmail.conf 5e94ff0dc46cc6c37e7fe10d107cfdbb
 /etc/fail2ban/action.d/shorewall-ipset-proto6.conf 8d710fb2ef9cab0993956c5852409b72
 /etc/fail2ban/action.d/shorewall.conf 1d4ab5b99d18e11384d5506f13ea445f
 /etc/fail2ban/action.d/smtp.py b4d23d3eb0cf59909b1ad0bf831fcaff
 /etc/fail2ban/action.d/symbiosis-blacklist-allports.conf b115a5562adf6e2c76ad13a9aaa00a90
 /etc/fail2ban/action.d/ufw.conf 268387a303d69c814801608921c425e4
 /etc/fail2ban/action.d/xarf-login-attack.conf d9b723a140f9356c7e1bba5dee76516f
 /etc/fail2ban/fail2ban.conf d69808e46c0fde98cb6994fc1807b34d
 /etc/fail2ban/filter.d/3proxy.conf 285af6d118ea5345dfb1af26d010f959
 /etc/fail2ban/filter.d/apache-auth.conf a275d59c663823bfa6710a0c6b0c1003
 /etc/fail2ban/filter.d/apache-badbots.conf 58eddea83654cffdb7307ecceb6d3a01
 /etc/fail2ban/filter.d/apache-botsearch.conf bd2f44554a3aaa679b10368ac2ad38fc
 /etc/fail2ban/filter.d/apache-common.conf 87411bcffc9e7f0301a1651f91221788
 /etc/fail2ban/filter.d/apache-fakegooglebot.conf 4a2e2570425468f2865b7ba4625c4f19
 /etc/fail2ban/filter.d/apache-modsecurity.conf 9ef1dd9655938c9e4cb37dbfd279d07f
 /etc/fail2ban/filter.d/apache-nohome.conf 787fae6f13398d03ba5aada47c0b38ec
 /etc/fail2ban/filter.d/apache-noscript.conf 817a490ac92fe807c49622862a966297
 /etc/fail2ban/filter.d/apache-overflows.conf bebdf7a6dffa89a2ed72ebbbe038f24d
 /etc/fail2ban/filter.d/apache-pass.conf 9deffde7a16b5e7142346d9036744919
 /etc/fail2ban/filter.d/apache-shellshock.conf 98aa308017f01860be6b902415b4dd5d
 /etc/fail2ban/filter.d/assp.conf cb9d20e55823cff862c7668e2c5831de
 /etc/fail2ban/filter.d/asterisk.conf 4d5211ab617c9e242902f7ff2b27655c
 /etc/fail2ban/filter.d/bitwarden.conf 201427cd10aed27592961a55d25fd04f
 /etc/fail2ban/filter.d/botsearch-common.conf b546f05992f9b7c1db26b9f55c6f2c32
 /etc/fail2ban/filter.d/centreon.conf 289377d5904d0e9eae6f4d56b789a2b3
 /etc/fail2ban/filter.d/common.conf dc920231e137cf3df35a0ac68ddd97e1
 /etc/fail2ban/filter.d/counter-strike.conf 6d9714efbfdcaa4e0f03de96397d05b1
 /etc/fail2ban/filter.d/courier-auth.conf 1b943215d828916934a48da6a9cd9371
 /etc/fail2ban/filter.d/courier-smtp.conf 925056ec18ab654d3906538ad3eac17c
 /etc/fail2ban/filter.d/cyrus-imap.conf 738d29a562415f920b1dca0fb78f6c7c
 /etc/fail2ban/filter.d/directadmin.conf 834a2111b12b4562b5ccf8b7a31fa1f7
 /etc/fail2ban/filter.d/domino-smtp.conf eb0578ff73a1bf499c333cc103381816
 /etc/fail2ban/filter.d/dovecot.conf be78d2a9282954dacb60a0b05edba148
 /etc/fail2ban/filter.d/dropbear.conf e0c30a472e752b9e848123ac918d4aff
 /etc/fail2ban/filter.d/drupal-auth.conf bae517e107e7326eb2cf5f3510260dab
 /etc/fail2ban/filter.d/ejabberd-auth.conf 7c27adb260f232d7d1913db9ded13aa3
 /etc/fail2ban/filter.d/exim-common.conf fc7208a8a6dc5ae884f1d12f1c4eed88
 /etc/fail2ban/filter.d/exim-spam.conf 1632006b4443aa764ca5b04bfbfa1e18
 /etc/fail2ban/filter.d/exim.conf f3cc931a64589b951d5d50c2f0e4260e
 /etc/fail2ban/filter.d/freeswitch.conf c21930674fd26658abf7a574414a9e6f
 /etc/fail2ban/filter.d/froxlor-auth.conf 016e28f7d6ef65214b2c55f6fabbecbf
 /etc/fail2ban/filter.d/gitlab.conf 0fadcd1acf567d68e852e8f7099e6f3d
 /etc/fail2ban/filter.d/grafana.conf ac30cf9bb1866225b4d5f07f9e572ed0
 /etc/fail2ban/filter.d/groupoffice.conf b7cbbcf7013c493834efa3ce81216f7c
 /etc/fail2ban/filter.d/gssftpd.conf 468f015e1687e621e351ba8e13135f27
 /etc/fail2ban/filter.d/guacamole.conf bfe68ff09e924ace4ac64a050674b383
 /etc/fail2ban/filter.d/haproxy-http-auth.conf e1868882271e38006b94f6be8de8c1c0
 /etc/fail2ban/filter.d/horde.conf 0bcee5c60b5e0714cdbe8d12c17d03cf
 /etc/fail2ban/filter.d/ignorecommands/apache-fakegooglebot 0abb04f22e21a9b8d569e69605209b9c
 /etc/fail2ban/filter.d/kerio.conf f8531dca3006ddcc5145ca5353a92fcd
 /etc/fail2ban/filter.d/lighttpd-auth.conf 793700e5abe99253b6516d873e89179e
 /etc/fail2ban/filter.d/mongodb-auth.conf 68aebabbab4b51573230acf7975a0cbc
 /etc/fail2ban/filter.d/monit.conf 7d5719a524d02682e4c118aada845882
 /etc/fail2ban/filter.d/monitorix.conf 8d29867c4c6d5affa5b22a1769072828
 /etc/fail2ban/filter.d/mssql-auth.conf e421f1e26f9f2889ebf6f265855d99e5
 /etc/fail2ban/filter.d/murmur.conf a66bd6390be2e81355b6d3c7a76c00aa
 /etc/fail2ban/filter.d/mysqld-auth.conf 67cabde0313ca3bdcc0965e34140595f
 /etc/fail2ban/filter.d/nagios.conf 2f38bc0aee9c787baceb1af97ab98867
 /etc/fail2ban/filter.d/named-refused.conf d63435a371eaf87562e21279d814db49
 /etc/fail2ban/filter.d/nginx-bad-request.conf 2eb2f46eb09125ddb667628dea2606e8
 /etc/fail2ban/filter.d/nginx-botsearch.conf 25592d31f5a417d7e8cb4a4a41fc079a
 /etc/fail2ban/filter.d/nginx-http-auth.conf a6be4279cdba2bbc1e7ceaee76c4c50e
 /etc/fail2ban/filter.d/nginx-limit-req.conf d7d780d0d0e5e77a5b23afd121fbdb5b
 /etc/fail2ban/filter.d/nsd.conf 6d47def897a25346178174300bb575c4
 /etc/fail2ban/filter.d/openhab.conf 6b6aac610352fc1ec1b2e3ecd13cd1f7
 /etc/fail2ban/filter.d/openwebmail.conf 6a27aa31db87833bd5456df7e01ff173
 /etc/fail2ban/filter.d/oracleims.conf 6ce2854b4c90888de9562bc44adbdff7
 /etc/fail2ban/filter.d/pam-generic.conf 73052198258e96bdd24ab830d7730366
 /etc/fail2ban/filter.d/perdition.conf 0cc5ea440cf9f71777e01e011a27490f
 /etc/fail2ban/filter.d/php-url-fopen.conf f877b5920afc317023cb339f1979a64c
 /etc/fail2ban/filter.d/phpmyadmin-syslog.conf 5ac921d41c79916644ef00f709b1742e
 /etc/fail2ban/filter.d/portsentry.conf 7f642f7fe2b329e69db81023baccbb7f
 /etc/fail2ban/filter.d/postfix.conf eb5afba0272f31eb80aa09b6bf22c4ce
 /etc/fail2ban/filter.d/proftpd.conf 40f14bbcf14654ff52f4c0b7b4f3a19c
 /etc/fail2ban/filter.d/pure-ftpd.conf b0770ea94f0f3c41a9a75a7b8a4459a3
 /etc/fail2ban/filter.d/qmail.conf fb1af4aca05230c58e61dbc8c31e458d
 /etc/fail2ban/filter.d/recidive.conf 190ab18db96f9093de2210cc52d2a41d
 /etc/fail2ban/filter.d/roundcube-auth.conf 466e17c074d6578dd7fad7b8c712ec96
 /etc/fail2ban/filter.d/scanlogd.conf df062c3a1fe7aeba8f45d7a1ac1d2896
 /etc/fail2ban/filter.d/screensharingd.conf 7f9c1fe844dabf6ff53cb8425557f7cb
 /etc/fail2ban/filter.d/selinux-common.conf f006a8a410652b953e62e4c2b7c9fd90
 /etc/fail2ban/filter.d/selinux-ssh.conf a86b87975e0fd4b09a185b724bc6063d
 /etc/fail2ban/filter.d/sendmail-auth.conf a6f19e0257c8ee5b46fabf293b1bdb2c
 /etc/fail2ban/filter.d/sendmail-reject.conf 97b7c7df1b2667e0b6f66df0c749bea9
 /etc/fail2ban/filter.d/sieve.conf a8a6805d10f038fd0e1c6f2db2ca7fd5
 /etc/fail2ban/filter.d/slapd.conf 85398477ff48b6d9e3b9269aedb95897
 /etc/fail2ban/filter.d/softethervpn.conf 8225375dba20c27db3d934dddececad9
 /etc/fail2ban/filter.d/sogo-auth.conf 3768d14930758b94a24acee5b6ffd648
 /etc/fail2ban/filter.d/solid-pop3d.conf 59c995616b30851d11e85e5cd6e95560
 /etc/fail2ban/filter.d/squid.conf 875aa604802ae7f7bdb64de61320cd66
 /etc/fail2ban/filter.d/squirrelmail.conf a9938cce23d5a410c8311db514cca2fb
 /etc/fail2ban/filter.d/sshd.conf 32dc68cfa862e945dc0f10eb065de70b
 /etc/fail2ban/filter.d/stunnel.conf 0bca290a15f504a8fc7d265768919d53
 /etc/fail2ban/filter.d/suhosin.conf f5d0fbb7951c89478f5136d4ea0da228
 /etc/fail2ban/filter.d/tine20.conf f625d4a177c7e900e5d5561b5f12b4be
 /etc/fail2ban/filter.d/traefik-auth.conf 51e6bed25c5fc73f1c3c3ec29b89bd49
 /etc/fail2ban/filter.d/uwimap-auth.conf f8f8fb6ed7216c55e5843c590ede5abf
 /etc/fail2ban/filter.d/vsftpd.conf b5251ece30d8137d6e574eb74df2458d
 /etc/fail2ban/filter.d/webmin-auth.conf 1ddf0787de3fdf6d5452c56b0f047c19
 /etc/fail2ban/filter.d/wuftpd.conf fbf0107c53f138e8c5ce18f0e9b08b4c
 /etc/fail2ban/filter.d/xinetd-fail.conf 189f8c5f2b9a144e976c5e4b5164fbe1
 /etc/fail2ban/filter.d/znc-adminlog.conf 0588e29e97cf1f9dbe68adb50c73f859
 /etc/fail2ban/filter.d/zoneminder.conf 70f7fde5c01f2e770fc174708fd5c266
 /etc/fail2ban/jail.conf fe889b256ba47275622e00d18f56af4c
 /etc/fail2ban/jail.d/defaults-debian.conf b31fc6c51ba2585f8f12f1b05bbce5ca
 /etc/fail2ban/paths-arch.conf 054307da19e77a024d193187a72a0dab
 /etc/fail2ban/paths-common.conf cbfb4d0adf4a8c28ef5653951998045d
 /etc/fail2ban/paths-debian.conf ee4e402a7e534dcd615c1c94209e726f
 /etc/fail2ban/paths-opensuse.conf 277aba07de31fb353a56a88f18eb9c44
 /etc/init.d/fail2ban c0df5d318bb21a45d38472113dea9d2e
 /etc/logrotate.d/fail2ban 5f2f5cd2320405d6add2240c0a65a930
 /etc/monit/monitrc.d/fail2ban 2458d0ccd1a0e2a43beb99d328047cb6
Description: ban hosts that cause multiple authentication errors
 Fail2ban monitors log files (e.g. /var/log/auth.log,
 /var/log/apache/access.log) and temporarily or persistently bans
 failure-prone addresses by updating existing firewall rules.  Fail2ban
 allows easy specification of different actions to be taken such as to ban
 an IP using iptables or hostsdeny rules, or simply to send a notification
 email.
 .
 By default, it comes with filter expressions for various services
 (sshd, Apache, proftpd, sasl, etc.) but configuration can be
 easily extended for monitoring any other text file.  All filters and
 actions are given in the config files, thus fail2ban can be adopted
 to be used with a variety of files and firewalls.  Following recommends
 are listed:
 .
  - iptables/nftables -- default installation uses iptables for banning.
    nftables is also supported. You most probably need it
  - whois -- used by a number of *mail-whois* actions to send notification
    emails with whois information about attacker hosts. Unless you will use
    those you don't need whois
  - python3-pyinotify -- unless you monitor services logs via systemd, you
    need pyinotify for efficient monitoring for log files changes
Homepage: https://www.fail2ban.org
Original-Maintainer: Debian Python Team <[email protected]>

Package: fakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 220
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.33-1
Depends: libfakeroot (>= 1.33-1), libc6 (>= 2.34)
Description: tool for simulating superuser privileges
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains fakeroot command and the daemon that remembers
 fake ownership/permissions of files manipulated by fakeroot
 processes.
Original-Maintainer: Clint Adams <[email protected]>

Package: fdisk
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 392
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libc6 (>= 2.38), libfdisk1 (>= 2.38), libmount1 (>= 2.24.2), libncursesw6 (>= 6), libreadline8t64 (>= 6.0), libsmartcols1 (>= 2.28~rc1), libtinfo6 (>= 6)
Recommends: sensible-utils
Description: collection of partitioning utilities
 This package contains the classic fdisk, sfdisk and cfdisk partitioning
 utilities from the util-linux suite.
 .
 The utilities included in this package allow you to partition
 your hard disk. The utilities supports both modern and legacy
 partition tables (eg. GPT, MBR, etc).
 .
 The fdisk utility is the classical text-mode utility.
 The cfdisk utilitity gives a more userfriendly curses based interface.
 The sfdisk utility is mostly for automation and scripting uses.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: ffmpeg
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 2468
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 7:6.1.1-3ubuntu5
Depends: libavcodec60 (>= 7:6.1), libavdevice60 (>= 7:6.0), libavfilter9 (>= 7:6.0), libavformat60 (>= 7:6.0), libavutil58 (>= 7:6.0), libc6 (>= 2.35), libpostproc57 (>= 7:6.0), libsdl2-2.0-0 (>= 2.0.12), libswresample4 (>= 7:6.0), libswscale7 (>= 7:6.0)
Suggests: ffmpeg-doc
Description: Tools for transcoding, streaming and playing of multimedia files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This package contains:
  * ffmpeg: a command line tool to convert multimedia files between formats
  * ffplay: a simple media player based on SDL and the FFmpeg libraries
  * ffprobe: a simple multimedia stream analyzer
  * qt-faststart: a utility to rearrange Quicktime files
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 63
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.45-3build1
Depends: libc6 (>= 2.38), libmagic1t64 (= 1:5.45-3build1)
Breaks: debhelper (<< 12.2~)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <[email protected]>

Package: finalrd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 30
Maintainer: Dimitri John Ledkov <[email protected]>
Architecture: all
Version: 9build1
Recommends: initramfs-tools-core
Description: final runtime directory for shutdown
 Generates a systemd compatible shutdown runtime directory. This
 enables to execute scripts and binaries to clean up shutdown.
 .
 Also supports hookless operation, to simply facilitate clean shutdowns.
 .
 Approximate tmpfs RAM requirement is 14MB on shutdown.
Homepage: https://launchpad.net/finalrd

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 552
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9.0-5build1
Pre-Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~)
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: https://savannah.gnu.org/projects/findutils/
Original-Maintainer: Andreas Metzler <[email protected]>

Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 468
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.15.0-1.1ubuntu2
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), fontconfig-config
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by defoma
 available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <[email protected]>

Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 239
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: fontconfig
Version: 2.15.0-1.1ubuntu2
Replaces: kubuntu-settings-desktop (<< 1:23.04.3)
Depends: fonts-dejavu-core | fonts-liberation | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre | fonts-noto-core
Breaks: kubuntu-settings-desktop (<< 1:23.04.3), libfontconfig1 (<< 2.13.0)
Conffiles:
 /etc/fonts/conf.d/README ad6182d0b838d9d8f39219a37b88b24d
 /etc/fonts/fonts.conf 9632eb1c8b4d81e0e300cd733a4beefe
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <[email protected]>

Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2292
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Depends: fonts-dejavu-mono
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
 /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
 /etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28
 /etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408
 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif and serif-bold
 variants. For additional variants, see the fonts-dejavu-mono and
 fonts-dejavu-extra packages.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <[email protected]>
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1281
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Replaces: fonts-dejavu-core (<< 2.37-7~), fonts-dejavu-extra (<< 2.37-7~)
Breaks: fonts-dejavu-core (<< 2.37-7~), fonts-dejavu-extra (<< 2.37-7~)
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd
 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the monospaced variants. For additional
 variants, see the fonts-dejavu-core and fonts-dejavu-extra packages.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Original-Maintainer: Debian Fonts Task Force <[email protected]>
Homepage: https://dejavu-fonts.github.io/

Package: fonts-droid-fallback
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 7347
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: fonts-android
Version: 1:6.0.1r16-1.1build1
Replaces: fonts-droid (<< 1:6.0.0r26-1~)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: fonts-noto-mono
Suggests: fonts-noto
Breaks: fonts-droid (<< 1:6.0.0r26-1~)
Conffiles:
 /etc/fonts/conf.avail/65-droid-sans-fallback.conf b53978fe17be3c725aa002da2496257c
Description: handheld device font with extensive style and language support (fallback)
 This package provides DroidSans Fallback variants, Fallback and
 FallbackFull.
 .
 Each contains extensive character set coverage including
 Western Europe, Eastern/Central Europe, Baltic, Cyrillic, Greek and
 Turkish support. The Droid Sans regular font also includes support for
 Arabic, Simplified and Traditional Chinese, Hebrew, Japanese, Korean and
 Thai.
 .
 Droid was designed by Ascender's Steve Matteson and hinted to provide
 optimal quality for screen text.
Original-Maintainer: Debian Fonts Task Force <[email protected]>
Homepage: https://android.googlesource.com/platform/frameworks/base/

Package: fonts-glyphicons-halflings
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 298
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: twitter-bootstrap3 (3.4.1+dfsg-3+deb12u1build0.24.04.1)
Version: 1.009~3.4.1+dfsg-3+deb12u1build0.24.04.1
Description: icons made for smaller graphic
 GLYPHICONS is a family of icon fonts
 created with an emphasis to simplicity and easy orientation.
 .
 GLYPHICONS Halflings, a subset optimized for smaller graphics,
 were freely licensed as part of Bootstrap 2.x and 3.x.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://getbootstrap.com/

Package: fonts-noto-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1156
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Replaces: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Breaks: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Enhances: fonts-noto-core
Conffiles:
 /etc/fonts/conf.avail/30-droid-noto-mono.conf 3637d988826c19a1859d29b79ee01e87
Description: "No Tofu" monospaced font family with large Unicode coverage
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains Noto Mono font family
 (formerly known as Droid Mono),
 and core weights for the Noto Sans Mono font family.
 Beware that Noto Mono has a much smaller repertoire
 than Noto Sans or Noto Serif.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Original-Maintainer: Debian Fonts Task Force <[email protected]>
Homepage: https://www.google.com/get/noto/

Package: fonts-ubuntu-console
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 58
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: fonts-ubuntu
Version: 0.869+git20240321-0ubuntu1
Description: console version of the Ubuntu Mono font
 The Ubuntu Font Family is a set of contemporary sans-serif fonts developed
 between 2010-2011. Dalton Maag performed the font design work and
 implementation with funding from Canonical. The fonts have been the default
 fonts for Ubuntu since 2010.
 .
 This package contains the "Ubuntu Mono" font converted to a bitmap version
 for Linux console use. These fonts can be loaded from a virtual terminal by
 executing "setfont /usr/share/consolefonts/UbuntuMono*.psf" .
Homepage: https://design.ubuntu.com/font/
Original-Maintainer: Debian Fonts Task Force <[email protected]>

Package: fonts-urw-base35
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 15560
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 20200910-8
Replaces: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~)
Depends: xfonts-utils
Suggests: fonts-freefont-otf | fonts-freefont-ttf, fonts-texgyre
Breaks: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~)
Conffiles:
 /etc/X11/fonts/Type1/fonts-urw-base35.alias 32ee9a005b7c7a089bdd5a5c4ee19c89
 /etc/X11/fonts/Type1/fonts-urw-base35.scale 1027533ffa7574e6b30b528d72287445
 /etc/ghostscript/fontmap.d/10fonts-urw-base35.conf a97fb8d980202e59cc253c9c21bb2d30
Description: font set metric-compatible with the 35 PostScript Level 2 Base Fonts
 A commercial-quality set of PostScript Type 1 fonts, metric-compatible
 with the 35 PostScript Language Level 2 Base Fonts. This package contains
 outlines in .t1 format and metrics in .afm format of the following fonts:
 .
  C059
  D050000L
  Nimbus Mono PS
  Nimbus Roman
  Nimbus Sans
  Nimbus Sans Narrow
  P052
  Standard Symbols PS
  URW Bookman
  URW Gothic
  Z003
 .
 This package also makes the fonts available to an X server under both
 their "urw" names and via fonts.alias under the official "adobe" names.
 .
 Extensive remakes of these fonts in the OpenType format are available in the
 GUST TeX Gyre collection in the fonts-texgyre package. The Cyrillic glyphs
 added to the now obsolete urwcyr fork of these fonts have been merged into
 the GNU FreeFont collection available in the fonts-freefont-otf or
 fonts-freefont-ttf packages.
Original-Maintainer: Debian Fonts Task Force <[email protected]>
Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts

Package: freetds-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: freetds
Version: 1.3.17+ds-2build3
Description: configuration files for FreeTDS SQL client libraries
 FreeTDS is an implementation of the Tabular DataStream protocol, used for
 connecting to MS SQL and Sybase servers over TCP/IP.
 .
 This package manages the configuration files that are common to all of
 the TDS client library implementations (CT-Lib, DB-Lib, and ODBC),
 stored in /etc/freetds/.
Homepage: http://www.freetds.org/
Original-Maintainer: Joseph Nahmias <[email protected]>

Package: freetds-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1971
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: freetds
Version: 1.3.17+ds-2build3
Depends: libct4 (= 1.3.17+ds-2build3), libsybdb5 (= 1.3.17+ds-2build3)
Recommends: freetds-doc
Description: MS SQL and Sybase client library (static libs and headers)
 FreeTDS is an implementation of the Tabular DataStream protocol, used for
 connecting to MS SQL and Sybase servers over TCP/IP.
 .
 This package includes the static libraries and header files for TDS, which
 you will need to develop applications that connect to MS SQL servers.  You
 will also need this package if you are installing the Perl DBD::Sybase
 module on your system using CPAN.
Homepage: http://www.freetds.org/
Original-Maintainer: Joseph Nahmias <[email protected]>

Package: freetds-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 11463
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: freetds
Version: 1.3.17+ds-2build3
Description: FreeTDS documentation
 FreeTDS is an implementation of the Tabular DataStream protocol, used for
 connecting to MS SQL and Sybase servers over TCP/IP.
 .
 This package includes the user guide as well as the library API reference
 manual.
Homepage: http://www.freetds.org/
Original-Maintainer: Joseph Nahmias <[email protected]>

Package: friendly-recovery
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 45
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 0.2.42
Depends: systemd-sysv, whiptail
Recommends: gettext-base, update-manager-core
Breaks: grub2 (<< 1.99-12ubuntu4), initramfs-tools (<< 0.99ubuntu4), upstart (<< 1.3-0ubuntu9)
Description: Make recovery boot mode more user-friendly
 Make the recovery boot mode more user-friendly by providing a menu
 with pluggable options.
Original-Maintainer: Debian QA Group <[email protected]>

Package: fuse3
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 94
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.14.0-5build1
Replaces: fuse
Provides: fuse (= 3.14.0-5build1)
Depends: libc6 (>= 2.38), libfuse3-3 (= 3.14.0-5build1), adduser, mount (>= 2.19.1), sed (>= 4)
Breaks: fuse
Conffiles:
 /etc/fuse.conf ba9c9667f7df01ae7081d2c05d1d24e6
Description: Filesystem in Userspace (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 13
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: gcc-defaults (1.214ubuntu1)
Version: 4:13.2.0-7ubuntu1
Provides: c++-compiler
Depends: cpp (= 4:13.2.0-7ubuntu1), cpp-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1), gcc (= 4:13.2.0-7ubuntu1), g++-13 (>= 13.2.0-11~), g++-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1), gcc-13 (>= 13.2.0-11~)
Suggests: g++-multilib
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ compiler.
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: g++-13
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 29
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Provides: c++-compiler, c++abi2-dev
Depends: g++-13-x86-64-linux-gnu (= 13.3.0-6ubuntu2~24.04.1), gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), gcc-13 (= 13.3.0-6ubuntu2~24.04.1)
Suggests: g++-13-multilib, gcc-13-doc (>= 13)
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: g++-13-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 33545
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Replaces: g++-13 (<< 13.2.0-11)
Provides: c++-compiler-x86-64-linux-gnu
Depends: gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), gcc-13-x86-64-linux-gnu (= 13.3.0-6ubuntu2~24.04.1), libstdc++-13-dev (= 13.3.0-6ubuntu2~24.04.1), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: gcc-13-doc (>= 13)
Breaks: g++-13 (<< 13.2.0-11)
Description: GNU C++ compiler for x86_64-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for x86_64-linux-gnu architecture.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: g++-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-defaults (1.214ubuntu1)
Version: 4:13.2.0-7ubuntu1
Replaces: g++ (<< 4:13.2.0-3)
Depends: cpp-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1), gcc-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1), g++-13-x86-64-linux-gnu (>= 13.2.0-11~)
Breaks: g++ (<< 4:13.2.0-3)
Description: GNU C++ compiler for the amd64 architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ cross-compiler
 for the amd64 architecture.
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: galera-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 33517
Maintainer: Codership Oy <[email protected]>
Architecture: amd64
Version: 26.4.25-ubu2404
Replaces: galera
Provides: galera, galera-4, wsrep
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1)
Breaks: galera
Conflicts: galera-3, garbd-2, garbd-3, garbd2, garbd3, percona-galera-3, percona-galera-4, percona-xtradb-cluster-galera, percona-xtradb-cluster-galera-2.x, percona-xtradb-cluster-galera-26, percona-xtradb-cluster-galera-3.x, percona-xtradb-cluster-galera-4.x, percona-xtradb-cluster-garbd-2.x, percona-xtradb-cluster-garbd-3.x, percona-xtradb-cluster-garbd-4.x
Description: Replication framework for transactional applications
 Galera is a fast synchronous multimaster wsrep provider (replication engine)
 for transactional databases and similar applications. For more information
 about wsrep API see https://github.com/codership/wsrep-API. For a description
 of Galera replication engine see http://galeracluster.com.
 .
 This package contains the Galera library/plugin.
Homepage: https://www.galeracluster.com/

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1736
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.2.1-2build3
Provides: awk
Pre-Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libmpfr6 (>= 3.1.3), libreadline8t64 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Conffiles:
 /etc/profile.d/gawk.csh b3d9e29a36f945b2065b2f88d18dadaa
 /etc/profile.d/gawk.sh bfc054c0862d0fad98ca641b951c7061
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/
Original-Maintainer: Adrian Bunk <[email protected]>

Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 37
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: gcc-defaults (1.214ubuntu1)
Version: 4:13.2.0-7ubuntu1
Provides: c-compiler
Depends: cpp (= 4:13.2.0-7ubuntu1), cpp-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1), gcc-13 (>= 13.2.0-11~), gcc-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C compiler.
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: gcc-13
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 553
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Version: 13.3.0-6ubuntu2~24.04.1
Replaces: cpp-13 (<< 7.1.1-8)
Provides: c-compiler
Depends: gcc-13-x86-64-linux-gnu (= 13.3.0-6ubuntu2~24.04.1), gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), cpp-13 (= 13.3.0-6ubuntu2~24.04.1), binutils (>= 2.39)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Suggests: gcc-13-multilib, gcc-13-doc (>= 13), gcc-13-locales (>= 13)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: gcc-13-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 113
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: gcc-13-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 61333
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Replaces: cpp-13-x86-64-linux-gnu (<< 7.1.1-8), gcc-13 (<< 13.2.0-11)
Provides: c-compiler-x86-64-linux-gnu
Depends: cpp-13-x86-64-linux-gnu (= 13.3.0-6ubuntu2~24.04.1), gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), libcc1-0 (>= 13.3.0-6ubuntu2~24.04.1), binutils-x86-64-linux-gnu (>= 2.39), libgcc-13-dev (= 13.3.0-6ubuntu2~24.04.1), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Suggests: gcc-13-doc (>= 13), gcc-13-locales (>= 13)
Breaks: gcc-13 (<< 13.2.0-11)
Description: GNU C compiler for the x86_64-linux-gnu architecture
 This is the GNU C compiler for the x86_64-linux-gnu architecture,
 a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: gcc-14-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 113
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: gcc-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 25
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-defaults (1.214ubuntu1)
Version: 4:13.2.0-7ubuntu1
Replaces: gcc (<< 4:13.2.0-3)
Depends: cpp-x86-64-linux-gnu (= 4:13.2.0-7ubuntu1), gcc-13-x86-64-linux-gnu (>= 13.2.0-11~)
Recommends: libc6-dev, libc-dev
Suggests: make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb-x86-64-linux-gnu, gcc-doc
Breaks: gcc (<< 4:13.2.0-3)
Description: GNU C compiler for the amd64 architecture
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C cross-compiler
 for the amd64 architecture.
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: gdisk
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 784
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.0.10-1build1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libncursesw6 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 13.1), libtinfo6 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that provides utilities for Globally Unique
 Identifier (GUID) Partition Table (GPT) disks.
 .
 Features:
 .
  - Edit GUID partition table definitions
  - In place conversion of BSD disklabels to GPT
  - In place conversion of MBR to GPT
  - In place conversion of GPT to MBR
  - Create hybrid MBR/GPT layouts
  - Repair damaged GPT data structures
  - Repair damaged MBR structures
  - Back up GPT data to a file (and restore from file)
Homepage: http://sourceforge.net/projects/gptfdisk/
Original-Maintainer: Jonathan Carter <[email protected]>

Package: gettext
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2632
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 0.21-14ubuntu2
Depends: gettext-base, libc6 (>= 2.38), libgomp1 (>= 6), libunistring5 (>= 1.1), libxml2 (>= 2.9.1)
Recommends: curl | wget | lynx
Suggests: autopoint, gettext-doc, libasprintf-dev, libgettextpo-dev
Breaks: autopoint (<= 0.17-11)
Description: GNU Internationalization utilities
 Interesting for authors or maintainers of other packages or programs
 which they want to see internationalized.
Homepage: https://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <[email protected]>

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 268
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.21-14ubuntu2
Depends: libc6 (>= 2.38)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: https://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <[email protected]>

Package: ghostscript
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 183
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 10.02.1~dfsg1-0ubuntu7.8
Replaces: ghostscript-x (<< 10.02.0~dfsg-1)
Provides: ghostscript-x (= 10.02.1~dfsg1-0ubuntu7.8), postscript-viewer
Depends: libgs10 (= 10.02.1~dfsg1-0ubuntu7.8), libc6 (>= 2.34)
Suggests: texlive-binaries
Conflicts: ghostscript-x (<< 10.02.0~dfsg-1)
Description: interpreter for the PostScript language and for PDF
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 Furthermore, it can render PostScript and PDF files as graphics
 to be printed on non-PostScript printers.
 Supported printers include common dot-matrix, inkjet and laser models.
 .
 The suggested texlive-binaries package is only required when using dvipdf.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: gir1.2-atk-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 100
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Depends: gir1.2-gobject-2.0, libatk1.0-0t64 (>= 2.51.90)
Description: ATK accessibility toolkit (GObject introspection)
 ATK is a toolkit providing accessibility interfaces for applications or
 other toolkits. By implementing these interfaces, those other toolkits or
 applications can be used with tools such as screen readers, magnifiers, and
 other alternative input devices.
 .
 This package can be used by other packages using the GIRepository format to
 generate dynamic bindings
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: gir1.2-atspi-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 82
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: gir1.0-gtk-2.0 (<< 2.22), gobject-introspection-repository
Depends: gir1.2-dbus-1.0, gir1.2-glib-2.0, gir1.2-gobject-2.0, libatspi2.0-0t64 (>= 2.52.0-1build1)
Description: Assistive Technology Service Provider (GObject introspection)
 This package can be used by other packages using the GIRepository format to
 generate dynamic bindings
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: gir1.2-freedesktop
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 156
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.80.1-1
Provides: gir1.2-cairo-1.0 (= 1.80.1-1), gir1.2-dbus-1.0 (= 1.80.1-1), gir1.2-dbusglib-1.0 (= 1.80.1-1), gir1.2-fontconfig-2.0 (= 1.80.1-1), gir1.2-freetype2-2.0 (= 1.80.1-1), gir1.2-gl-1.0 (= 1.80.1-1), gir1.2-libxml2-2.0 (= 1.80.1-1), gir1.2-vulkan-1.0 (= 1.80.1-1), gir1.2-xfixes-4.0 (= 1.80.1-1), gir1.2-xft-2.0 (= 1.80.1-1), gir1.2-xlib-2.0 (= 1.80.1-1), gir1.2-xrandr-1.3 (= 1.80.1-1)
Depends: gir1.2-gobject-2.0 (>= 2.80.0), libcairo-gobject2 (>= 1.10.0)
Description: Introspection data for some FreeDesktop components
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains small pieces of introspection data for the Cairo,
 FontConfig, FreeType, GL, and some XOrg libraries, in the typelib format
 used to generate bindings for dynamic languages like JavaScript and Python.
 They are far from complete and only include what is necessary for other
 introspection packages to work properly.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: gir1.2-freedesktop-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 173
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.80.1-1
Replaces: libgirepository1.0-dev (<< 1.78.1-7~)
Provides: gir1.2-cairo-1.0-dev (= 1.80.1-1), gir1.2-dbus-1.0-dev (= 1.80.1-1), gir1.2-dbusglib-1.0-dev (= 1.80.1-1), gir1.2-fontconfig-2.0-dev (= 1.80.1-1), gir1.2-freetype2-2.0-dev (= 1.80.1-1), gir1.2-gl-1.0-dev (= 1.80.1-1), gir1.2-libxml2-2.0-dev (= 1.80.1-1), gir1.2-vulkan-1.0-dev (= 1.80.1-1), gir1.2-xfixes-4.0-dev (= 1.80.1-1), gir1.2-xft-2.0-dev (= 1.80.1-1), gir1.2-xlib-2.0-dev (= 1.80.1-1), gir1.2-xrandr-1.3-dev (= 1.80.1-1)
Depends: gir1.2-freedesktop (= 1.80.1-1), gir1.2-gobject-2.0-dev
Breaks: libgirepository-1.0-1 (<< 1.78.1-3~), libgirepository1.0-dev (<< 1.78.1-7~)
Description: GIR XML for some FreeDesktop components
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains small pieces of introspection data for the Cairo,
 FontConfig, FreeType, GL, and some XOrg libraries, in the GIR XML format
 used to generate bindings for static languages like C++, D and Haskell.
 They are far from complete and only include what is necessary for other
 introspection packages to work properly.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: gir1.2-girepository-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 102
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.80.1-1
Replaces: gir1.2-glib-2.0 (<< 1.78.1-7~)
Depends: gir1.2-gobject-2.0 (>= 2.80.0), libgirepository-1.0-1 (>= 1.75.6)
Breaks: gir1.2-glib-2.0 (<< 1.78.1-7~), gjs (<< 1.78.1-2~), pygobject (<< 3.46.0-3~)
Description: Introspection data for GIRepository library
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GIRepository library,
 which can be used to manipulate the search path used by language bindings
 and load introspection data.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: gir1.2-glib-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 765
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Provides: gir1.2-gio-2.0 (= 2.80.0-6ubuntu3.8), gir1.2-giounix-2.0 (= 2.80.0-6ubuntu3.8), gir1.2-glibunix-2.0 (= 2.80.0-6ubuntu3.8), gir1.2-gmodule-2.0 (= 2.80.0-6ubuntu3.8), gir1.2-gobject-2.0 (= 2.80.0-6ubuntu3.8)
Depends: libglib2.0-0t64 (= 2.80.0-6ubuntu3.8)
Breaks: libgirepository-1.0-1 (<< 1.78.1-3~)
Description: Introspection data for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries, in the typelib format used to generate
 bindings for dynamic languages like JavaScript and Python.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: gir1.2-glib-2.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11511
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Replaces: libgirepository1.0-dev (<< 1.78.1-7~)
Provides: gir1.2-gio-2.0-dev (= 2.80.0-6ubuntu3.8), gir1.2-giounix-2.0-dev (= 2.80.0-6ubuntu3.8), gir1.2-glibunix-2.0-dev (= 2.80.0-6ubuntu3.8), gir1.2-gmodule-2.0-dev (= 2.80.0-6ubuntu3.8), gir1.2-gobject-2.0-dev (= 2.80.0-6ubuntu3.8)
Depends: gir1.2-glib-2.0 (= 2.80.0-6ubuntu3.8)
Breaks: libgirepository-1.0-1 (<< 1.78.1-3~), libgirepository1.0-dev (<< 1.78.1-7~)
Description: GIR XML for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries, in the GIR XML format used to generate
 bindings for static languages like C++, D and Haskell.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: gir1.2-packagekitglib-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 112
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: packagekit
Version: 1.2.8-2ubuntu1.5
Depends: gir1.2-gio-2.0, gir1.2-glib-2.0 (>= 1.36), gir1.2-gobject-2.0, libpackagekit-glib2-18 (>= 1.2.7)
Description: GObject introspection data for the PackageKit GLib library
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 This package contains introspection data for the PackageKit
 GLib interface library.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <[email protected]>

Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 21692
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.43.0-1ubuntu7.3
Provides: git-completion, git-core
Depends: libc6 (>= 2.38), libcurl3t64-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.2), perl, liberror-perl, git-man (>> 1:2.43.0), git-man (<< 1:2.43.0-.)
Recommends: ca-certificates, patch, less, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
 /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git main components with minimal dependencies.
 Additional functionality, e.g. a graphical user interface and revision
 tree visualizer, tools for interoperating with other VCS's, or a web
 interface, is provided as separate git* packages.
Homepage: https://git-scm.com/
Original-Maintainer: Jonathan Nieder <[email protected]>

Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 2162
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.43.0-1ubuntu7.3
Description: fast, scalable, distributed revision control system (manual pages)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides reference documentation for use by the 'man'
 utility and the 'git help' command.
Homepage: https://git-scm.com/
Original-Maintainer: Jonathan Nieder <[email protected]>

Package: gnupg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 509
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Depends: dirmngr (<< 2.4.4-2ubuntu17.4.1~), dirmngr (>= 2.4.4-2ubuntu17.4), gnupg-utils (<< 2.4.4-2ubuntu17.4.1~), gnupg-utils (>= 2.4.4-2ubuntu17.4), gpg (<< 2.4.4-2ubuntu17.4.1~), gpg (>= 2.4.4-2ubuntu17.4), gpg-agent (<< 2.4.4-2ubuntu17.4.1~), gpg-agent (>= 2.4.4-2ubuntu17.4), gpgsm (<< 2.4.4-2ubuntu17.4.1~), gpgsm (>= 2.4.4-2ubuntu17.4), gpgv (<< 2.4.4-2ubuntu17.4.1~), gpgv (>= 2.4.4-2ubuntu17.4), keyboxd (<< 2.4.4-2ubuntu17.4.1~), keyboxd (>= 2.4.4-2ubuntu17.4)
Recommends: gnupg-l10n (= 2.4.4-2ubuntu17.4), gpg-wks-client (<< 2.4.4-2ubuntu17.4.1~), gpg-wks-client (>= 2.4.4-2ubuntu17.4)
Suggests: parcimonie, xloadimage, gpg-wks-server (<< 2.4.4-2ubuntu17.4.1~), gpg-wks-server (>= 2.4.4-2ubuntu17.4)
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.4.4-2ubuntu17.4), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the full suite of GnuPG tools for cryptographic
 communications and data storage.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 400
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gnupg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 343
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.46), libksba8 (>= 1.6.3), zlib1g (>= 1:1.1.4)
Recommends: gpg, gpg-agent, gpgconf, gpgsm
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - utility programs
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains several useful utilities for manipulating
 OpenPGP data and other related cryptographic elements.  It includes:
 .
  * addgnupghome -- create .gnupg home directories
  * applygnupgdefaults -- run gpgconf --apply-defaults for all users
  * gpgcompose -- an experimental tool for constructing arbitrary
                  sequences of OpenPGP packets (e.g. for testing)
  * gpgparsemail -- parse an e-mail message into annotated format
  * gpgsplit -- split a sequence of OpenPGP packets into files
  * gpgtar -- encrypt or sign files in an archive
  * kbxutil -- list, export, import Keybox data
  * lspgpot -- convert PGP ownertrust values to GnuPG
  * migrate-pubring-from-classic-gpg -- use only "modern" formats
  * symcryptrun -- use simple symmetric encryption tool in GnuPG framework
  * watchgnupg -- watch socket-based logs
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gnupg2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 32
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2.4.4-2ubuntu17.4
Depends: gnupg (>= 2.4.4-2ubuntu17.4)
Description: GNU privacy guard - a free PGP replacement (dummy transitional package)
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This is a dummy transitional package that provides symlinks from gpg2
 to gpg.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1206
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Replaces: gnupg (<< 2.1.21-4)
Depends: gpgconf (= 2.4.4-2ubuntu17.4), libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.10.3), libgpg-error0 (>= 1.46), libnpth0t64 (>= 0.90), libreadline8t64 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: dirmngr, gpg-agent
Suggests: gnupg (= 2.4.4-2ubuntu17.4), keyboxd
Breaks: gnupg (<< 2.1.21-4)
Description: GNU Privacy Guard -- minimalist public key operations
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg itself, and is useful on its own
 only for public key operations (encryption, signature verification,
 listing OpenPGP certificates, etc).  If you want full capabilities
 (including secret key operations, network access, etc), please
 install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 627
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.4.4-2ubuntu17.4), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan0 (>= 2.5.1), libc6 (>= 2.38), libgcrypt20 (>= 1.10.3), libgpg-error0 (>= 1.46), libnpth0t64 (>= 0.90)
Suggests: gnupg (= 2.4.4-2ubuntu17.4), dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
 /etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455
Description: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.  Without this package, trying to do
 secret-key operations with any part of the modern GnuPG suite will
 fail.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gpg-wks-client
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 176
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Depends: dirmngr (= 2.4.4-2ubuntu17.4), gpg (= 2.4.4-2ubuntu17.4), gpg-agent (= 2.4.4-2ubuntu17.4), libassuan0 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.46)
Suggests: gnupg (= 2.4.4-2ubuntu17.4)
Description: GNU privacy guard - Web Key Service client
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG client for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 257
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.46), libreadline8t64 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains core utilities used by different tools in the
 suite offered by GnuPG.  It can be used to programmatically edit
 config files for tools in the GnuPG suite, to launch or terminate
 per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 545
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Depends: gpgconf (= 2.4.4-2ubuntu17.4), libassuan0 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.10.3), libgpg-error0 (>= 1.46), libksba8 (>= 1.6.3), libnpth0t64 (>= 0.90), libreadline8t64 (>= 6.0)
Recommends: dirmngr, gpg-agent
Suggests: gnupg (= 2.4.4-2ubuntu17.4), keyboxd
Description: GNU privacy guard - S/MIME version
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the gpgsm program. gpgsm is a tool to provide
 digital encryption and signing services on X.509 certificates and the
 CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 337
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Depends: libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.46), libnpth0t64 (>= 0.90), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 344
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.11-4build1
Provides: rgrep
Pre-Depends: libc6 (>= 2.38), libpcre2-8-0 (>= 10.32)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: https://www.gnu.org/software/grep/
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3721
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.23.0-3build2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 4.0), libstdc++6 (>= 4.1.1), libuchardet0 (>= 0.0.1)
Suggests: groff
Conffiles:
 /etc/groff/man.local 0430e21404e7bde42b0e0fee0fd60c00
 /etc/groff/mdoc.local 93e49c8bd131bfa85a469d836dd7a28a
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/
Original-Maintainer: Colin Watson <[email protected]>

Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 12512
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-1ubuntu7.3
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4), init-select
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1t64 (>= 38), libefivar1t64 (>= 38), libfreetype6 (>= 2.2.1), libfuse3-3 (>= 3.2.3), liblzma5 (>= 5.1.1alpha+20120614), debconf (>= 0.5) | debconf-2.0, gettext-base, lsb-base (>= 3.0-6), python3, python3-apt
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, mtools, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conflicts: init-select
Conffiles:
 /etc/grub.d/00_header c63a5ca05b210afeee7c4174c8e47c1d
 /etc/grub.d/05_debian_theme 7af00bf2d834b3104688c9cbf40b23b3
 /etc/grub.d/10_linux ffcb156621de9f70a37e189176a83297
 /etc/grub.d/10_linux_zfs 1e898a27f29acfd4133f45f5b4382628
 /etc/grub.d/20_linux_xen 0d28e77b657224c9499fe10bacb75f5f
 /etc/grub.d/25_bli e071d24e35e554a6e6446068f59715f6
 /etc/grub.d/30_os-prober 9dfb165d3fb3dcd313c2f9abd6e84094
 /etc/grub.d/30_uefi-firmware 2d918e14d15f40c01398a7534702870d
 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
 /etc/grub.d/41_custom 1d876baff8ca3841aa6ba057e881a2e4
 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
 /etc/init.d/grub-common 088b8dfbff672d12dc501be54eeb64c6
 /etc/pm/sleep.d/10_grub-common bc63b0c6613e95979446d17a88875d6a
Description: GRand Unified Bootloader (common files)
 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
 .
 grub-mkrescue needs the suggested packages mtools (for UEFI targets) and
 xorriso.
Built-Using: lzo2 (= 2.10-2build4)
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <[email protected]>

Package: grub-efi-amd64
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 204
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: grub2-unsigned
Version: 2.12-1ubuntu7.3
Replaces: grub, grub-common (<= 1.97~beta2-1), grub-coreboot, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-pc, grub2 (<< 2.12-1ubuntu7.3)
Depends: debconf (>= 0.5) | debconf-2.0, grub-efi-amd64-bin (= 2.12-1ubuntu7.3), grub2-common (>= 2.02~beta2-9), ucf
Conflicts: elilo, grub, grub-coreboot, grub-efi-ia32, grub-ieee1275, grub-legacy, grub-pc, grub-xen
Description: GRand Unified Bootloader, version 2 (EFI-AMD64 version)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This is a dependency package for a version of GRUB that has been built for
 use with the EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS
 interface has been activated).  Installing this package indicates that this
 version of GRUB should be the active boot loader.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <[email protected]>

Package: grub-efi-amd64-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 10239
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: grub2-unsigned
Version: 2.12-1ubuntu7.3
Replaces: grub-common (<= 1.97~beta2-1), grub-efi-amd64 (<< 1.99-1), grub2 (<< 2.12-1ubuntu7.3)
Depends: grub-common (>= 2.02~beta2-9)
Recommends: grub-efi-amd64-signed, efibootmgr
Description: GRand Unified Bootloader, version 2 (EFI-AMD64 modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with the
 EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has
 been activated).  It can be installed in parallel with other flavours, but
 will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-amd64 is also
 installed.
Homepage: https://www.gnu.org/software/grub/
Efi-Vendor: ubuntu
Original-Maintainer: GRUB Maintainers <[email protected]>

Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3163
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-1ubuntu7.3
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.12-1ubuntu7.3)
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.12-1ubuntu7.3)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets.  Users can write UTF-8 text to their menu
    entries.
 .
 This package contains GRUB modules that have been built for use with the
 traditional PC/BIOS architecture.  It can be installed in parallel with
 other flavours, but will not automatically install GRUB as the active boot
 loader nor automatically update grub.cfg on upgrade unless grub-pc is also
 installed.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <[email protected]>

Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1391
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-1ubuntu7.3
Replaces: grub, grub-cloud-amd64 (<< 0.0.4), grub-common (<< 1.99-1), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy, grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7)
Depends: grub-common (= 2.12-1ubuntu7.3), dpkg (>= 1.15.4), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1t64 (>= 38), libefivar1t64 (>= 38), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-cloud-amd64 (<< 0.0.4), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-29ubuntu60), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy-doc (<< 0.97-29ubuntu60), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~)
Conflicts: grub-legacy
Conffiles:
 /etc/kernel/postinst.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433
 /etc/kernel/postrm.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433
Description: GRand Unified Bootloader (common files for version 2)
 This package contains common files shared by the distinct flavours of GRUB.
 The files in this package are specific to GRUB 2, and would break GRUB
 Legacy if installed on the same system.
Homepage: https://www.gnu.org/software/grub/
Original-Maintainer: GRUB Maintainers <[email protected]>

Package: gsettings-desktop-schemas
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 308
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 46.1-0ubuntu1
Depends: dconf-gsettings-backend | gsettings-backend, session-migration
Breaks: gnome-panel (<< 3.49), gnome-shell (<< 44), libmutter-11-0, metacity (<< 1:3.49)
Description: GSettings desktop-wide schemas
 gsettings-desktop-schemas contains a collection of GSettings schemas for
 settings shared by various components of a desktop.
Homepage: https://www.gnome.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: gtk-update-icon-cache
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 131
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.41-4ubuntu1.3
Replaces: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Depends: libc6 (>= 2.38), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0t64 (>= 2.57.2)
Breaks: libgtk-3-bin (<< 3.20.6-1), libgtk2.0-bin (<< 2.24.30-2)
Description: icon theme caching utility
 gtk-update-icon-cache creates mmap()able cache files for icon themes.
 .
 GTK can use the cache files created by gtk-update-icon-cache to avoid a lot
 of system call and disk seek overhead when the application starts. Since the
 format of the cache files allows them to be mmap()ed shared between multiple
 applications, the overall memory consumption is reduced as well.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 244
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.12-1ubuntu3.1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.38)
Suggests: less
Conflicts: zutils (<< 1.12-3.1~)
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Homepage: https://www.gnu.org/software/gzip/
Original-Maintainer: Milan Kupcevic <[email protected]>

Package: hdparm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 236
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 9.65+ds-1build1
Depends: libc6 (>= 2.34), lsb-base
Recommends: powermgmt-base
Conffiles:
 /etc/hdparm.conf fe09abd1838cf3e012353933c5aa0dda
Description: tune hard disk parameters for high performance
 Get/set device parameters for Linux SATA/IDE drives.
 Provides a command line interface to various kernel interfaces supported by
 the Linux SATA/PATA/SAS "libata" subsystem and the older IDE driver subsystem.
 Many newer (2008 and later) USB drive enclosures now also support "SAT"
 (SCSI-ATA Command Translation) and therefore may also work with hdparm.
Homepage: http://sourceforge.net/projects/hdparm/
Original-Maintainer: Alexandre Mestiashvili <[email protected]>

Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 440
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.17-2
Description: default fallback theme for FreeDesktop.org icon themes
 This is the default fallback theme used by implementations of the
 Freedesktop.org Icon Theme specification.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 46
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.23+nmu2ubuntu2
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.34)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Michael Meskes <[email protected]>

Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 424
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.3.0-4build1
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtinfo6 (>= 6)
Suggests: lm-sensors, lsof, strace
Description: interactive processes viewer
 Htop is an ncursed-based process viewer similar to top, but it
 allows one to scroll the list vertically and horizontally to see
 all processes and their full command lines.
 .
 Tasks related to processes (killing, renicing) can be done without
 entering their PIDs.
Homepage: https://htop.dev/
Original-Maintainer: Daniel Lange <[email protected]>

Package: humanity-icon-theme
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 20660
Maintainer: Ubuntu MOTU Developers <[email protected]>
Architecture: all
Version: 0.6.16
Depends: adwaita-icon-theme, hicolor-icon-theme
Description: Humanity Icon theme
 Humanity and Humanity Dark are nice and well polished icon themes for
 the GNOME desktop.

Package: hwdata
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 77
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.379-1
Depends: pci.ids, usb.ids
Description: hardware identification / configuration data
 This package contains various hardware identification and configuration data,
 such as the pci.ids database, or the XFree86/xorg Cards database.
 It is needed for the kudzu hardware detection.
Original-Maintainer: Pino Toscano <[email protected]>
Homepage: https://github.com/vcrhonek/hwdata

Package: i965-va-driver
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 1768
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: intel-vaapi-driver
Version: 2.4.1+dfsg1-1ubuntu0.1
Provides: va-driver
Depends: libva-driver-abi-1.20, libc6 (>= 2.38), libdrm-intel1 (>= 2.4.52), libdrm2 (>= 2.4.52)
Suggests: i965-va-driver-shaders
Enhances: libva2
Description: VAAPI driver for Intel G45 & HD Graphics family
 The VA-API (Video Acceleration API) enables hardware accelerated video
 decode/encode at various entry-points (VLD, IDCT, Motion Compensation
 etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
 to fully expose the video decode capabilities in today's GPUs.
 .
 This package contains the video decode and encode driver backend for the
 Intel G45 chipsets and Intel HD Graphics for the Intel Core processor family.
 The supported platforms include:
  * Cantiga, Intel GMA 4500MHD (GM45)
  * Ironlake, Intel HD Graphics for 2010 Intel Core processor family
  * Sandy Bridge, Intel HD Graphics for 2011 Intel Core processor family
  * Ivy Bridge
  * Haswell
  * Broadwell
  * Skylake
  * Kaby Lake
  * Coffee Lake
  * Cannon Lake
Homepage: https://01.org/linuxmedia/vaapi
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: ibverbs-providers
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1268
Maintainer: Benjamin Drung <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: rdma-core
Version: 50.0-2ubuntu0.2
Replaces: libipathverbs1 (<< 15), libmlx4-1 (<< 15), libmlx5-1 (<< 15), libmthca1 (<< 15)
Provides: libefa1, libipathverbs1, libmana1, libmlx4-1, libmlx5-1, libmthca1
Depends: libc6 (>= 2.38), libibverbs1 (>= 38)
Breaks: libipathverbs1 (<< 15), libmlx4-1 (<< 15), libmlx5-1 (<< 15), libmthca1 (<< 15)
Conffiles:
 /etc/libibverbs.d/bnxt_re.driver dfdc62acff60833950aa76845b3dd974
 /etc/libibverbs.d/cxgb4.driver 813a775ac8e335dc5b8a0f927f7df8ae
 /etc/libibverbs.d/efa.driver d00959c9098cf143ec040c39f2173f04
 /etc/libibverbs.d/erdma.driver af223c5ade09076518761548e2a3b35a
 /etc/libibverbs.d/hfi1verbs.driver 20cd8c1046d62aba32fa4c949a5db80b
 /etc/libibverbs.d/hns.driver c505e0f70fb172afd48acc33a733acde
 /etc/libibverbs.d/ipathverbs.driver f2710bebefa1cb4c40f96556f6919925
 /etc/libibverbs.d/irdma.driver 602e763262c98fcf96a5e4fd26f57a9e
 /etc/libibverbs.d/mana.driver 455c558f3f75a35a2cf2cb31e8cd470c
 /etc/libibverbs.d/mlx4.driver 6bfeea2b2666f6ffd09ce5ffa6a94b12
 /etc/libibverbs.d/mlx5.driver 3fef613081d2d483e9680be82e18e0fe
 /etc/libibverbs.d/mthca.driver 176eb299dbf746486ea18c832b871094
 /etc/libibverbs.d/ocrdma.driver 28285b19f7b8044e6a5003477cc26ef5
 /etc/libibverbs.d/qedr.driver 181182a2b8a7dd604cdfbbcd1f873e13
 /etc/libibverbs.d/rxe.driver 98676a4e0bc992ee80998b8599039434
 /etc/libibverbs.d/siw.driver 4cad034f720e49b931e7e05da889c919
 /etc/libibverbs.d/vmw_pvrdma.driver 2ae063cb52092f09bbcccc7c6cafad69
Description: User space provider drivers for libibverbs
 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification.  iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology.  InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 An RDMA driver consists of a kernel portion and a user space portion.
 This package contains the user space verbs drivers:
 .
  - bnxt_re: Broadcom NetXtreme-E RoCE HCAs
  - cxgb4: Chelsio T4 iWARP HCAs
  - efa: Amazon Elastic Fabric Adapter
  - erdma: Alibaba Elastic RDMA (iWarp) Adapter
  - hfi1verbs: Intel Omni-Path HFI
  - hns: HiSilicon Hip06 SoC
  - ipathverbs: QLogic InfiniPath HCAs
  - irdma: Intel Ethernet Connection RDMA
  - mana: Microsoft Azure Network Adapter
  - mlx4: Mellanox ConnectX-3 InfiniBand HCAs
  - mlx5: Mellanox Connect-IB/X-4+ InfiniBand HCAs
  - mthca: Mellanox InfiniBand HCAs
  - ocrdma: Emulex OneConnect RDMA/RoCE device
  - qedr: QLogic QL4xxx RoCE HCAs
  - rxe: A software implementation of the RoCE protocol
  - siw: A software implementation of the iWarp protocol
  - vmw_pvrdma: VMware paravirtual RDMA device
Homepage: https://github.com/linux-rdma/rdma-core

Package: icu-devtools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 708
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: icu
Version: 74.2-1ubuntu3.1
Replaces: icu-tools (<< 74.1~rc-1~), libicu-dev (<< 74.2-1ubuntu3.1)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libicu74 (>= 74.1-1~), libstdc++6 (>= 13.1)
Breaks: icu-tools (<< 74.1~rc-1~), libicu-dev (<< 74.2-1ubuntu3.1)
Description: Development utilities for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package contains programs used to
 manipulate data files found in the ICU sources and is a dependency of
 libicu-dev.  End users would generally not need to install this package.
Homepage: https://icu.unicode.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: ieee-data
Status: deinstall ok config-files
Priority: optional
Section: net
Installed-Size: 13386
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 20220827.1
Config-Version: 20220827.1
Depends: wget | libwww-perl | curl
Description: OUI and IAB listings
 Provide the Organizationally Unique Identifier (OUI) and Individual Address
 Block (IAB) listings of identifiers assigned by IEEE Standards Association.
Original-Maintainer: Samuel Henrique <[email protected]>
Homepage: https://standards.ieee.org/products-services/regauth/index.html

Package: imagemagick
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 74
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 8:6.9.12.98+dfsg1-5.2build2
Depends: imagemagick-6.q16 (>= 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- binaries
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 This package include links to channel depth specific binaries and manual
 pages.
 .
 This is a dummy package.  You can safely purge or remove it.
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <[email protected]>

Package: imagemagick-6-common
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 481
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.12.98+dfsg1-5.2build2
Replaces: imagemagick-common (<< 8:6.9.12.98+dfsg1-1~)
Provides: imagemagick-common (= 8:6.9.12.98+dfsg1-5.2build2)
Breaks: imagemagick-common (<< 8:6.9.12.98+dfsg1-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~), libmagickcore-6.q16-4 (<< 8:6.9.8.9+dfsg-1~), libmagickcore-6.q16hdri-4 (<< 8:6.9.8.9+dfsg-1~)
Conffiles:
 /etc/ImageMagick-6/coder.xml 2cd28d60bb45db29bba17f35dc58ccb9
 /etc/ImageMagick-6/colors.xml 7a58fb76b799bf829c55eecd08db28c2
 /etc/ImageMagick-6/delegates.xml a4f217ebffb681b249dff29fa19eb9c1
 /etc/ImageMagick-6/log.xml 29c0a0702c3729fec215ce53438eb608
 /etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626
 /etc/ImageMagick-6/mime.xml 33255caa9d8edb23cd3bf96de362507f
 /etc/ImageMagick-6/policy-debian.xml 7e5fc23523a501ccf8146e2439378d68
 /etc/ImageMagick-6/policy-limited.xml 03fb84fef5dd639cd230a386e514d4ae
 /etc/ImageMagick-6/policy-open.xml 7435393bf35edb31ee68741749dba1e3
 /etc/ImageMagick-6/policy-secure.xml 8e4e0dabdb68ee964cf4a7dd9bb3eef8
 /etc/ImageMagick-6/policy-websafe.xml 277fa065e5eb3c874efbd50c0b2d0483
 /etc/ImageMagick-6/policy.xml 7e5fc23523a501ccf8146e2439378d68
 /etc/ImageMagick-6/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5
 /etc/ImageMagick-6/thresholds.xml 88370f6d426e50628949a43a71d1398a
 /etc/ImageMagick-6/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc
 /etc/ImageMagick-6/type-dejavu.xml 2914462b5aec3bf19f4f706c018e904f
 /etc/ImageMagick-6/type-ghostscript.xml e283f0f7916ca637a6bcb713f754d9be
 /etc/ImageMagick-6/type-urw-base35.xml 2f19ed10d310718f906557c44a2b7d4f
 /etc/ImageMagick-6/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c
 /etc/ImageMagick-6/type.xml a355c73d6843b2bfb5b5d7bb9cf2a5de
Description: image manipulation programs -- infrastructure
 imagemagick-common contains the filesystem infrastructure required for
 further installation of imagemagick in any configuration; it does not provide
 a full installation of binaries, libraries, and utilities
 required to run imagemagick.
 .
 This package is independent of channel depth.
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <[email protected]>

Package: imagemagick-6.q16
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 566
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.12.98+dfsg1-5.2build2
Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~)
Provides: imagemagick, imagemagick-6.defaultquantum (= 8:6.9.12.98+dfsg1-5.2build2)
Depends: libc6 (>= 2.34), libmagickcore-6.q16-7t64 (>= 8:6.9.10.2), libmagickwand-6.q16-7t64 (>= 8:6.9.12.98+dfsg1-5.2build2), hicolor-icon-theme
Recommends: libmagickcore-6.q16-7-extra, ghostscript, netpbm
Suggests: imagemagick-6-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, libraw-bin, xdg-utils
Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- quantum depth Q16
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats,
 you need to install the libmagickcore-6.q16-7-extra package.
 .
 This version of imagemagick is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <[email protected]>

Package: inetutils-telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 241
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: inetutils
Version: 2:2.5-3ubuntu4.2
Provides: telnet, telnet-client
Depends: libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.13~alpha1+dfsg), libtinfo6 (>= 6), netbase
Description: telnet client
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.
 .
 This implementation supports Kerberos, for authentication and encryption.
Homepage: https://www.gnu.org/software/inetutils/
Original-Maintainer: Guillem Jover <[email protected]>

Package: info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 436
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 7.1-3build2
Replaces: texinfo-doc-nonfree
Provides: info-browser
Depends: libc6 (>= 2.38), libtinfo6 (>= 6), install-info
Breaks: texinfo-doc-nonfree
Description: Standalone GNU Info documentation browser
 The Info file format is an easily-parsable representation for online
 documents. This program allows you to view Info documents, like the
 ones stored in /usr/share/info.
 .
 Much of the software in Debian comes with its online documentation in
 the form of Info files, so it is most likely you will want to install it.
Homepage: https://www.gnu.org/software/texinfo/
Original-Maintainer: Debian TeX Task Force <[email protected]>

Package: init
Protected: yes
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 17
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.66ubuntu1
Pre-Depends: systemd-sysv
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Important: yes
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 130
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.66ubuntu1
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 68
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.142ubuntu25.8
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.142ubuntu25.8), linux-base
Suggests: bash-completion
Breaks: e2fsprogs (<< 1.42.13), initscripts (<< 2.88dsf-59.3~), netplan.io (<< 0.37), upstart
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools c1cb0e052a2cdeef4f3257585c83c58d
 /etc/kernel/postrm.d/initramfs-tools e7471d253a5b24e2fd85b40be4e43218
Description: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <[email protected]>

Package: initramfs-tools-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 56
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: initramfs-tools
Version: 0.142ubuntu25.8
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libudev1 (>= 183)
Description: binaries used by initramfs-tools
 This package contains binaries used inside the initramfs images generated
 by initramfs-tools.
Original-Maintainer: Debian kernel team <[email protected]>

Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 207
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.142ubuntu25.8
Replaces: initramfs-tools (<< 0.121~)
Depends: busybox-initramfs (>= 1:1.30.1-4ubuntu5~), dhcpcd-base, dracut-install, e2fsprogs, initramfs-tools-bin (= 0.142ubuntu25.8), klibc-utils (>= 2.0.4-8~), cpio (>= 2.12), kmod, udev, coreutils (>= 8.24), logsave | e2fsprogs (<< 1.45.3-1~)
Recommends: zstd
Suggests: bash-completion
Breaks: busybox-initramfs (<< 1:1.30.1-4ubuntu5~), initramfs-tools (<< 0.121~)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 37168abeabf36c927e6c3877b7a343b9
Description: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <[email protected]>

Package: install-info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 212
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: texinfo
Version: 7.1-3build2
Depends: libc6 (>= 2.38)
Description: Manage installed documentation in info format
 The install-info utility creates the index of all installed documentation
 in info format and makes it available to info readers.
Homepage: https://www.gnu.org/software/texinfo/
Original-Maintainer: Debian TeX Task Force <[email protected]>

Package: intel-media-va-driver
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 13290
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: intel-media-driver
Version: 24.1.0+dfsg1-1ubuntu0.2
Provides: va-driver
Depends: libva-driver-abi-1.20, libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libigdgmm12 (>= 22.3.17+ds1), libstdc++6 (>= 11)
Description: VAAPI driver for the Intel GEN8+ Graphics family
 The VA-API (Video Acceleration API) enables hardware accelerated video
 decode/encode at various entry-points (VLD, IDCT, Motion Compensation
 etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
 to fully expose the video decode capabilities in today's GPUs.
 .
 This package contains the video decode and encode driver backend for
 the Intel HD Graphics of the Intel Core processor family. The supported
 platforms include:
  * Broadwell
  * Skylake
  * Broxton
  * Apollo Lake
  * Kaby Lake
  * Coffee Lake
  * Whiskey Lake
  * Cannon Lake
  * Ice Lake
 .
 Only a limited set of encoders is available via this driver: JPEG
 (Skylake and newer), AVC (Boxton and newer), HEVC and VP9 (Ice Lake and
 newer). Media shaders are only available on Ice Lake and newer.
Homepage: https://github.com/intel/media-driver
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: intel-microcode
Status: install ok installed
Priority: standard
Section: non-free-firmware/admin
Installed-Size: 20951
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.20260210.0ubuntu0.24.04.1
Depends: iucode-tool (>= 1.0)
Recommends: initramfs-tools (>= 0.113~)
Conflicts: microcode.ctl (<< 0.18~0)
Conffiles:
 /etc/default/intel-microcode 6a68a0e6e2d2ef001f1a374ece3c8558
 /etc/kernel/preinst.d/intel-microcode 4324b7d12701909b3a76bb5c6468a571
 /etc/modprobe.d/intel-microcode-blacklist.conf 71327241f6583b34944e638a955aba91
Description: Processor microcode firmware for Intel CPUs
 This package contains updated system processor microcode for
 Intel i686 and Intel X86-64 processors.  Intel releases microcode
 updates to correct processor behavior as documented in the
 respective processor specification updates.
 .
 For AMD processors, please refer to the amd64-microcode package.
Homepage: https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files
Original-Maintainer: Henrique de Moraes Holschuh <[email protected]>

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 3033
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 6.1.0-1ubuntu6.3
Replaces: iproute
Provides: arpd
Depends: debconf (>= 0.5) | debconf-2.0, libbpf1 (>= 1:0.6.0), libc6 (>= 2.38), libcap2 (>= 1:2.10), libdb5.3t64, libelf1t64 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin
Recommends: libatm1t64 (>= 2.4.1-17~)
Suggests: iproute2-doc, python3:any
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map 0e0f36cafc6a9cf76bc704cfd8f96ece
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos 35b7f1673d1d0486c4188fd06b46a410
 /etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2
Original-Maintainer: Debian Kernel Team <[email protected]>

Package: ipset
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 127
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 7.19-1ubuntu2
Provides: ipset-7.19
Depends: libc6 (>= 2.34), libipset13 (>= 7.15-1~)
Recommends: iptables
Breaks: xtables-addons-common (<< 1.41~)
Description: administration tool for kernel IP sets
 IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which can be
 administered by the ipset(8) utility. Depending on the type, currently an
 IP set may store IP addresses, (TCP/UDP) port numbers or IP addresses with
 MAC addresses in a  way which ensures lightning speed when matching an
 entry against a set.
 .
 If you want to
 .
  * store multiple IP addresses or port numbers and match against the
    entire collection using a single iptables rule.
  * dynamically update iptables rules against IP addresses or ports without
    performance penalty.
  * express complex IP address and ports based rulesets with a single
    iptables rule and benefit from the speed of IP sets.
 .
 then IP sets may be the proper tool for you.
Homepage: https://ipset.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: iptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2420
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.10-3ubuntu2
Depends: libip4tc2 (= 1.8.10-3ubuntu2), libip6tc2 (= 1.8.10-3ubuntu2), libxtables12 (= 1.8.10-3ubuntu2), netbase (>= 6.0), libc6 (>= 2.38), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3 (>= 1.0.6), libnfnetlink0 (>= 1.0.2), libnftnl11 (>= 1.1.6)
Recommends: nftables
Suggests: firewalld, kmod
Description: administration tools for packet filtering and NAT
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 iptables is the userspace command line program used to configure
 the Linux packet filtering and NAT ruleset. It is targeted towards systems
 and networks administrators.
 .
 This package contains several different utilities, the most important ones:
 .
 iptables-nft, iptables-nft-save, iptables-nft-restore (nft-based version)
 .
 iptables-legacy, iptables-legacy-save, iptables-legacy-restore (legacy version)
 .
 ip6tables-nft, ip6tables-nft-save, ip6tables-nft-restore (nft-based version)
 .
 ip6tables-legacy, ip6tables-legacy-save, ip6tables-legacy-restore (legacy
 version)
 .
 arptables-nft, arptables-nft-save, arptables-nft-restore (nft-based version)
 .
 ebtables-nft, ebtables-nft-save, ebtables-nft-restore (nft-based version)
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 121
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20240117-1ubuntu0.1
Provides: ping
Depends: libcap2-bin, libc6 (>= 2.38), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6)
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.
Homepage: https://github.com/iputils/iputils/
Original-Maintainer: Noah Meyerhans <[email protected]>

Package: iputils-tracepath
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 43
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20240117-1ubuntu0.1
Depends: libc6 (>= 2.38)
Suggests: traceroute
Description: Tools to trace the network path to a remote host
 The tracepath utility is similar to the traceroute utility, but also
 attempts to discover the MTU of the path. Supports IPv4 and IPv6.
Homepage: https://github.com/iputils/iputils/
Original-Maintainer: Noah Meyerhans <[email protected]>

Package: isa-support
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 152
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 21build1
Depends: libc6 (>= 2.34)
Description: CPU feature checking - common back-end
 The packages in the isa-support family probe for microprocessor Instruction
 Set Architecture features such as SSE3. By refusing to install on machines
 lacking a required feature, they allow ISA requirements to be handled in
 terms of package dependencies.
 .
 This package provides the feature-probing infrastructure. To assert a CPU
 requirement, other packages can pre-depend on one of the individual
 feature-specific packages:
 .
 sse2-support, sse3-support, sse4.2-support, altivec-support, neon-support,
 armv6-support, armv7-support, armv8-support, vfp-support, vfpv2-support,
 vfpv3-support
Original-Maintainer: Bastien Roucariès <[email protected]>

Package: iso-codes
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 20418
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 4.16.0-1
Suggests: isoquery
Description: ISO language, territory, currency, script codes and their translations
 This package provides the ISO 639, ISO 639-3, and ISO 639-5 language
 code lists, the ISO 4217 currency code list, the ISO 3166 territory
 code list, the ISO 3166-2 sub-territory list, and the ISO 15924
 script code list as JSON files.
 .
 More importantly, it also provides their translations to be used by
 other programs.
Original-Maintainer: Dr. Tobias Quathamer <[email protected]>
Homepage: https://salsa.debian.org/iso-codes-team/iso-codes

Package: iucode-tool
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 92
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.3.1-3build1
Depends: libc6 (>= 2.38)
Suggests: intel-microcode (>= 1)
Description: Intel processor microcode tool
 iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
 microcode collections, and to use the kernel facilities to upgrade the
 microcode on Intel system processors.
 .
 It can load microcode data files in text and binary format, sort, list and
 filter the microcodes contained in these files, write selected microcodes to a
 new file in binary format, or upload them to the kernel.
 .
 It operates on non-free microcode data downloaded directly from Intel or
 installed by the intel-microcode package.
Homepage: https://gitlab.com/iucode-tool
Original-Maintainer: Henrique de Moraes Holschuh <[email protected]>

Package: javascript-common
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 33
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 11+nmu1
Suggests: apache2 (>= 2.4.6~) | lighttpd | httpd
Conffiles:
 /etc/apache2/conf-available/javascript-common.conf 133aafb01e900b05e75042fd47dec067
 /etc/lighttpd/conf-available/90-javascript-alias.conf 568434a47d89bb89ecf81c8f9c4e1669
Description: Base support for JavaScript library packages
 Web applications that use JavaScript need to distribute it through HTTP. Using
 a common path for every script avoids the need to enable this path in the HTTP
 server for every package.
 .
 This is a helper package that creates /usr/share/javascript and enables it in
 the Apache and Lighttpd webserver.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>

Package: jq
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 113
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.7.1-3ubuntu0.24.04.2
Depends: libc6 (>= 2.38), libjq1 (= 1.7.1-3ubuntu0.24.04.2)
Description: lightweight and flexible command-line JSON processor
 jq is like sed for JSON data – you can use it to slice
 and filter and map and transform structured data with
 the same ease that sed, awk, grep and friends let you
 play with text.
 .
 It is written in portable C, and it has minimal runtime
 dependencies.
 .
 jq can mangle the data format that you have into the
 one that you want with very little effort, and the
 program to do so is often shorter and simpler than
 you’d expect.
Homepage: https://jqlang.github.io/jq
Original-Maintainer: ChangZhuo Chen (陳昌倬) <[email protected]>

Package: kbd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1300
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.6.4-2ubuntu2
Provides: console-utilities
Depends: libc6 (>= 2.34), console-setup | console-setup-mini
Conflicts: console-utilities
Description: Linux console font and keytable utilities
 This package allows you to set up the Linux console, change the font,
 resize text mode virtual consoles and remap the keyboard.
 .
 You will probably want to install the “console-setup” package which
 sets up console font and keymap data files.
Homepage: https://kbd-project.org/
Original-Maintainer: Console utilities maintainers <[email protected]>

Package: keyboard-configuration
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 804
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: console-setup
Version: 1.226ubuntu1
Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47)
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, xkb-data (>= 2.41~), xkb-data (<< 2.41A)
Pre-Depends: debconf | debconf-2.0
Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47)
Description: system-wide keyboard preferences
 This package maintains the keyboard preferences in
 /etc/default/keyboard.  Other packages can use the information
 provided by this package in order to configure the keyboard on the
 console or in X Window.
Original-Maintainer: Debian Install System Team <[email protected]>

Package: keyboxd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 206
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.4-2ubuntu17.4
Depends: gpgconf (= 2.4.4-2ubuntu17.4), init-system-helpers (>= 1.52), libassuan0 (>= 2.5.1), libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.46), libksba8 (>= 1.6.3), libnpth0t64 (>= 0.90), libsqlite3-0 (>= 3.14.0)
Suggests: gnupg (= 2.4.4-2ubuntu17.4), dbus-user-session, libpam-systemd
Description: GNU privacy guard - public key material service
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 keyboxd is a server for managing public key material of OpenPGP and
 S/MIME.
Homepage: https://www.gnupg.org/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 479
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: klibc
Version: 2.0.13-4ubuntu0.2
Depends: libklibc (= 2.0.13-4ubuntu0.2)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: Debian Kernel Team <[email protected]>

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 253
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 31+20240202-2ubuntu7.2
Depends: libc6 (>= 2.38), liblzma5 (>= 5.4.5-0.2), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5), libkmod2 (= 31+20240202-2ubuntu7.2)
Conffiles:
 /etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
 /etc/init.d/kmod 76fcb3d88797536529a112ea3365e1d9
 /etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
 /etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
 /etc/modprobe.d/blacklist-framebuffer.conf 097e2142ae3e4dd2911eda7844ce0c18
 /etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
 /etc/modprobe.d/blacklist.conf 75f90164fe53985db48e7aa168bd5e7c
 /etc/modprobe.d/disable-algif_aead.conf 04813ca05ec9114b93aef8e835ad6954
 /etc/modprobe.d/iwlwifi.conf f27bc645e93e20c8e532325d190ac8ee
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: kpartx
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 77
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: multipath-tools
Version: 0.9.4-5ubuntu8.1
Depends: dmsetup, udev, libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97)
Description: create device mappings for partitions
 Kpartx can be used to set up device mappings for the partitions of any
 partitioned block device.
 .
 It is part of the Linux multipath-tools, but is useful on any
 device-mapper using system.
Homepage: http://christophe.varoqui.free.fr/
Original-Maintainer: Debian DM Multipath Team <[email protected]>

Package: krb5-multidev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 822
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: comerr-dev, libgssapi-krb5-2 (= 1.20.1-6ubuntu2.6), libgssrpc4t64 (= 1.20.1-6ubuntu2.6), libk5crypto3 (= 1.20.1-6ubuntu2.6), libkadm5clnt-mit12 (= 1.20.1-6ubuntu2.6), libkadm5srv-mit12 (= 1.20.1-6ubuntu2.6), libkrb5-3 (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc
Description: development files for MIT Kerberos without Heimdal conflict
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 Most users wishing to build applications against MIT Kerberos should
 install libkrb5-dev.  However, that package conflicts with heimdal-dev.
 This package installs libraries and headers in /usr/include/mit-krb5 and
 /usr/lib/mit-krb5 and can be installed along side heimdal-multidev, which
 provides the same facilities for Heimdal.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: landscape-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 408
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: landscape-client
Version: 24.02-0ubuntu5.7
Depends: python3:any, debconf (>= 0.5) | debconf-2.0, python3-twisted, python3-configobj, python3-apt, ca-certificates, python3-gdbm, python3-netifaces, lsb-release, adduser, bc, lshw, libpam-modules, python3-setuptools
Description: Landscape administration system client - Common files
 Landscape is a web-based tool for managing Ubuntu systems. This
 package is necessary if you want your machine to be managed in a
 Landscape account.
 .
 This package provides the core libraries, as well as the landscape-sysinfo
 command.  It also sets up the landscape user, landscape directories, and the
 hook that runs landscape-sysinfo on startup.
Homepage: https://github.com/CanonicalLtd/landscape-client
Original-Maintainer: Landscape Team <[email protected]>

Package: lbzip2
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 158
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.5-2.3
Depends: libc6 (>= 2.34)
Description: fast, multi-threaded bzip2 utility
 lbzip2 is an independent, multi-threaded implementation of bzip2. It is
 commonly the fastest SMP (and uniprocessor) bzip2 compressor and decompressor.
 .
 lbzip2 integrates nicely with GNU tar.
Original-Maintainer: Mikolaj Izdebski <[email protected]>
Homepage: http://lbzip2.org/

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 309
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 590-2ubuntu2.1
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/
Original-Maintainer: Milan Kupcevic <[email protected]>

Package: libaacs0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 155
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libaacs
Version: 0.11.1-2build1
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0)
Recommends: libbdplus0
Enhances: libbluray2
Description: free-and-libre implementation of AACS
 libaacs is a research project to implement the Advanced Access Content
 System specification. It provides, through an open-source library, a
 way to understand how the AACS works.
 .
 This package DOES NOT provide any key or certificate that could be used
 to decode encrypted copyrighted material. It is based on the official
 public AACS specification only.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libaacs.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libabsl20220623t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1930
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: abseil
Version: 20220623.1-3.1ubuntu3.2
Replaces: libabsl20220623
Provides: libabsl20220623 (= 20220623.1-3.1ubuntu3.2)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Breaks: libabsl20220623 (<< 20220623.1-3.1ubuntu3.2)
Description: extensions to the C++ standard library
 Abseil is an open-source collection of C++ library code designed to augment the
 C++ standard library. The Abseil library code is collected from Google's C++
 codebase and has been extensively tested and used in production. In some cases,
 Abseil provides pieces missing from the C++ standard; in others, Abseil
 provides alternatives to the standard for special needs.
 .
 This package contains Abseil's shared libraries.
Homepage: https://abseil.io/
Original-Maintainer: Benjamin Barenblat <[email protected]>

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 74
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.3.2-1build1.1
Depends: libc6 (>= 2.38)
Description: access control list - shared library
 This package contains the shared library containing the POSIX 1003.1e
 draft standard 17 functions for manipulating access control lists.
Homepage: https://savannah.nongnu.org/projects/acl/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libaio1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.113-6build1.1
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
 This library enables userspace to use Linux kernel asynchronous I/O
 system calls, important for the performance of databases and other
 advanced applications.
 .
 This package contains the shared library.
Homepage: https://pagure.io/libaio
Original-Maintainer: Guillem Jover <[email protected]>

Package: libalgorithm-diff-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.201-1
Depends: perl:any
Recommends: libalgorithm-diff-xs-perl
Description: module to find differences between files
 Algorithm::Diff is a Perl module that allows users to analyze text based on a
 Longest Common Subsequence (LCS) algorithm. It can compare two files and find
 the differences between them, which can produce the same information as the
 common Unix tool 'diff'.
 .
 There is an XS-optimized implementation of the core loop, which accelerates
 some types of diff output (see libalgorithm-diff-xs-perl).
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Algorithm-Diff

Package: libalgorithm-diff-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 45
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 0.04-8build3
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.4), libalgorithm-diff-perl
Description: module to find differences between files (XS accelerated)
 Algorithm::Diff::XS is a Perl diff utility module based on Joe Schaefer's
 excellent but not very well-known Algorithm::LCS module, with a drop-in
 interface identical to Algorithm::Diff.
 .
 Note that only the LCSidx function is optimized in XS at the moment, which
 means only compact_diff will get significantly faster for large data sets,
 while diff and sdiff will run in identical speed as Algorithm::Diff.
Homepage: https://metacpan.org/release/Algorithm-Diff-XS
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libalgorithm-merge-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.08-5
Depends: perl:any, libalgorithm-diff-perl
Description: Perl module for three-way merge of textual data
 Algorithm::Merge provides three-way merge and diff functions, complementing
 the functionality offered by Algorithm::Diff (libalgorithm-diff-perl). Given
 three sets of items, known as the original, left and right, this module can
 take a three-way difference or merge them. Taking a difference provides an
 array reference that is very similar to the behaviour of Algorithm::Diff. One
 can also implement custom conflict resolution using the CONFLICT callback.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Algorithm-Merge

Package: libaom-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 8517
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.8.2-2ubuntu0.1
Depends: libaom3 (= 3.8.2-2ubuntu0.1)
Description: AV1 Video Codec Library -- Development Files
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the development files.
Homepage: https://aomedia.googlesource.com/aom/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libaom3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5350
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.8.2-2ubuntu0.1
Depends: libc6 (>= 2.34)
Description: AV1 Video Codec Library
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the shared library.
Homepage: https://aomedia.googlesource.com/aom/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libapache2-mod-security2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 1082
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: modsecurity-apache
Version: 2.9.7-1build3
Depends: libxml2 (>= 2.9.14), libapr1t64 (>= 1.2.7), libaprutil1t64 (>= 1.4.0), libc6 (>= 2.38), libcurl3t64-gnutls (>= 7.16.2), liblua5.1-0, libpcre2-8-0 (>= 10.32), libyajl2 (>= 2.0.4), apache2-api-20120211, apache2-bin (>= 2.4.16)
Recommends: modsecurity-crs
Conffiles:
 /etc/apache2/mods-available/security2.conf 3d855bbcff83483349f0e49063e2e34c
 /etc/apache2/mods-available/security2.load 8c18b901d8cef4c2b8a9834aba5ba224
 /etc/modsecurity/modsecurity.conf-recommended 6b3d878813487aa2e721f3764135d5e8
 /etc/modsecurity/unicode.mapping 5c1fb5a8d70c19866dcc4d2084ecc952
Description: Tighten web applications security for Apache
 Modsecurity is an Apache module whose purpose is to tighten the Web
 application security. Effectively, it is an intrusion detection and prevention
 system for the web server.
 .
 At the moment its main features are:
   * Audit log; store full request details in a separate file, including POST
     payloads.
   * Request filtering; incoming requests can be analysed and offensive requests
     can be rejected (or simply logged, if that is what you want). This feature
     can be used to prevent many types of attacks (e.g. XSS attacks, SQL
     injection, ...) and even allow you to run insecure applications on your
     servers (if you have no other choice, of course).
Homepage: https://github.com/SpiderLapbs/ModSecurity
Original-Maintainer: Alberto Gonzalez Iniesta <[email protected]>

Package: libapparmor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 4.0.1really4.0.1-0ubuntu0.24.04.6
Replaces: libapparmor-perl (<< 3.0.3-3)
Depends: libc6 (>= 2.38)
Breaks: libapparmor-perl (<< 3.0.3-3)
Description: changehat AppArmor library
 libapparmor1 provides a shared library one can compile programs
 against in order to use various AppArmor functionality,
 such as transitioning to a different AppArmor profile or hat.
Homepage: https://apparmor.net/
Original-Maintainer: Debian AppArmor Team <[email protected]>

Package: libappstream5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 738
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: appstream
Version: 1.0.2-1build6
Depends: libc6 (>= 2.33), libcurl3t64-gnutls (>= 7.63.0), libglib2.0-0t64 (>= 2.79.0), libstemmer0d (>= 0+svn527), libsystemd0 (>= 242), libxml2 (>= 2.9.0), libxmlb2 (>= 0.3.13), libyaml-0-2, libzstd1 (>= 1.5.5)
Description: Library to access AppStream services
 AppStream is a metadata specification which permits software components to
 provide information about themselves to automated systems and end-users
 before the software is actually installed.
 This permits informative displays of new applications to users in software
 centers, as well as allowing a system to make decisions on which new software
 a user might want to install (e.g. missing firmware or media handlers).
 .
 This package contains a GObject-based library to access AppStream
 services, like the software component metadata pool.
 It also contains functions for reading, writing and transforming AppStream
 metadata.
Homepage: https://www.freedesktop.org/wiki/Distributions/AppStream/
Original-Maintainer: Matthias Klumpp <[email protected]>

Package: libapr1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 283
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.7.2-3.1ubuntu0.1
Replaces: libapr1
Provides: libapr1 (= 1.7.2-3.1ubuntu0.1)
Depends: libc6 (>= 2.38), libuuid1 (>= 2.16)
Breaks: libapr1 (<< 1.7.2-3.1ubuntu0.1)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
Homepage: https://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-1.1ubuntu7
Depends: libaprutil1t64 (= 1.6.3-1.1ubuntu7), libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the SQLite3 database driver.
Homepage: https://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-1.1ubuntu7
Depends: libaprutil1t64 (= 1.6.3-1.1ubuntu7), libc6 (>= 2.4), libldap2 (>= 2.6.2)
Description: Apache Portable Runtime Utility Library - LDAP Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the LDAP driver.
Homepage: https://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: libaprutil1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 278
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-1.1ubuntu7
Replaces: libaprutil1
Provides: libaprutil1 (= 1.6.3-1.1ubuntu7)
Depends: libapr1t64 (>= 1.6.2), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libexpat1 (>= 2.0.1), libgdbm6t64 (>= 1.16), libssl3t64 (>= 3.0.0)
Breaks: libaprutil1 (<< 1.6.3-1.1ubuntu7)
Description: Apache Portable Runtime Utility Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
Homepage: https://apr.apache.org/
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: libapt-pkg6.0t64
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3249
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 2.8.3
Replaces: libapt-pkg6.0
Provides: libapt-pkg (= 2.8.3), libapt-pkg6.0 (= 2.8.3)
Depends: libbz2-1.0, libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 13.1), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.7.1), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 2.8.3)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~), libapt-pkg6.0 (<< 2.8.3)
Conflicts: libnettle8 (<< 3.9.1-2.2~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http(s), rsh as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).
Original-Maintainer: APT Development Team <[email protected]>

Package: libargon2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: argon2
Version: 0~20190702+dfsg-4build1
Depends: libc6 (>= 2.34)
Breaks: cryptsetup-initramfs (<< 2:2.6.1-2)
Description: memory-hard hashing function - runtime library
 Argon2 is a password-hashing function that can be used to hash passwords
 for credential storage, key derivation, or other applications.
 .
 There are two main versions of Argon2: Argon2i and Argon2d.
 Argon2i is the safest against side-channel attacks, while Argon2d provides
 the highest resistance against GPU cracking attacks.
 .
 Argon2i and Argon2d are parametrized by:
  * A time cost, which defines the amount of computation realized and
    therefore the execution time, given in number of iterations
  * A memory cost, which defines the memory usage, given in kibibytes
  * A parallelism degree, which defines the number of parallel threads
 .
 This package includes the dynamic library against which programs are linked.
Homepage: https://github.com/P-H-C/phc-winner-argon2
Original-Maintainer: Debian Security Tools <[email protected]>

Package: libargon2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 91
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: argon2
Version: 0~20190702+dfsg-4build1
Depends: libargon2-1 (= 0~20190702+dfsg-4build1)
Description: memory-hard hashing function - development files
 Argon2 is a password-hashing function that can be used to hash passwords
 for credential storage, key derivation, or other applications.
 .
 There are two main versions of Argon2: Argon2i and Argon2d.
 Argon2i is the safest against side-channel attacks, while Argon2d provides
 the highest resistance against GPU cracking attacks.
 .
 Argon2i and Argon2d are parametrized by:
  * A time cost, which defines the amount of computation realized and
    therefore the execution time, given in number of iterations
  * A memory cost, which defines the memory usage, given in kibibytes
  * A parallelism degree, which defines the number of parallel threads
 .
 This package contains headers and libraries for developing program based
 on argon2.
Homepage: https://github.com/P-H-C/phc-winner-argon2
Original-Maintainer: Debian Security Tools <[email protected]>

Package: libasan8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10791
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libasound2-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: alsa-lib
Version: 1.2.11-1ubuntu0.2
Replaces: libasound2t64 (<< 1.2.11-1ubuntu0.2)
Recommends: alsa-ucm-conf, alsa-topology-conf
Suggests: alsa-utils
Breaks: libasound2t64 (<< 1.2.11-1ubuntu0.2)
Description: Configuration files and profiles for ALSA drivers
 This package contains configuration files for ALSA drivers.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <[email protected]>

Package: libasound2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1171
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: alsa-lib
Version: 1.2.11-1ubuntu0.2
Replaces: libasound2
Provides: libasound2 (= 1.2.11-1ubuntu0.2)
Depends: libasound2-data (>= 1.2.11-1ubuntu0.2), libc6 (>= 2.38)
Suggests: libasound2-plugins (>= 1.0.24)
Breaks: alsa-utils (<< 1.2.1), libasound2 (<< 1.2.11-1ubuntu0.2)
Description: shared library for ALSA applications
 This package contains the ALSA library and its standard plugins, as well
 as the required configuration files.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/
Original-Maintainer: Debian ALSA Maintainers <[email protected]>

Package: libass9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 241
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libass
Version: 1:0.17.1-2build1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.3.5), libfribidi0 (>= 1.0.0), libharfbuzz0b (>= 1.2.6), libunibreak5 (>= 1.0)
Description: library for SSA/ASS subtitles rendering
 SubStation Alpha (SSA) is a subtitle file format that allows more
 advanced subtitles than the conventional SRT and similar formats.
 .
 This package contains the shared library for libass.
Homepage: https://github.com/libass/libass
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libassuan0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.5.6-1build1
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html
Original-Maintainer: Debian GnuPG-Maintainers <[email protected]>

Package: libasyncns0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libasyncns
Version: 0.8-6build4
Depends: libc6 (>= 2.34)
Description: Asynchronous name service query library
 libasyncns is a C library for Linux/Unix for executing name service queries
 asynchronously. It is an asynchronous wrapper around getaddrinfo(3),
 getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv.
Homepage: http://0pointer.de/lennart/projects/libasyncns/
Original-Maintainer: Tanguy Ortolo <[email protected]>

Package: libatk-bridge2.0-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 276
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: libatk-bridge2.0-0
Provides: libatk-bridge2.0-0 (= 2.52.0-1build1)
Depends: libatk1.0-0t64 (>= 2.51.90), libatspi2.0-0t64 (>= 2.9.90), libc6 (>= 2.38), libdbus-1-3 (>= 1.9.14), libglib2.0-0t64 (>= 2.79.0)
Breaks: libatk-bridge2.0-0 (<< 2.52.0-1build1)
Description: AT-SPI 2 toolkit bridge - shared library
 This package contains the ATK bridge shared library.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libatk-bridge2.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 33
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Depends: libatk-bridge2.0-0t64 (= 2.52.0-1build1), libatk1.0-dev, libglib2.0-dev, libatspi2.0-dev
Description: Development files for the AT-SPI 2 toolkit bridge
 These are the development files for libatk-bridge2.0, needed for
 compilation of programs which use it.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libatk1.0-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 210
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: libatk1.0-0
Provides: libatk1.0-0 (= 2.52.0-1build1)
Depends: libc6 (>= 2.4), libglib2.0-0t64 (>= 2.79.0), at-spi2-common
Breaks: libatk1.0-0 (<< 2.52.0-1build1)
Description: ATK accessibility toolkit
 ATK is a toolkit providing accessibility interfaces for applications or
 other toolkits. By implementing these interfaces, those other toolkits or
 applications can be used with tools such as screen readers, magnifiers, and
 other alternative input devices.
 .
 This is the runtime part of ATK, needed to run applications built with it.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libatk1.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1356
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: gir-repository-dev
Provides: gir1.2-atk-1.0-dev (= 2.52.0-1build1)
Depends: gir1.2-atk-1.0 (= 2.52.0-1build1), gir1.2-gobject-2.0-dev, libatk1.0-0t64 (= 2.52.0-1build1), pkgconf, libglib2.0-dev
Description: Development files for the ATK accessibility toolkit
 ATK is a toolkit providing accessibility interfaces for applications or
 other toolkits. By implementing these interfaces, those other toolkits or
 applications can be used with tools such as screen readers, magnifiers, and
 other alternative input devices.
 .
 These are the development files for ATK, needed for compilation of
 programs or toolkits which use it.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libatm1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 113
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-5.1build1
Replaces: libatm1
Provides: libatm1 (= 1:2.5.1-5.1build1)
Depends: libc6 (>= 2.34)
Breaks: libatm1 (<< 1:2.5.1-5.1build1)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Homepage: http://linux-atm.sourceforge.net/
Original-Maintainer: Debian QA Group <[email protected]>

Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libatspi2.0-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 262
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: libatspi2.0-0
Provides: libatspi2.0-0 (= 2.52.0-1build1)
Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.9.14), libglib2.0-0t64 (>= 2.79.0), libx11-6 (>= 2:1.2.99.901), libxi6 (>= 2:1.2.99.4)
Recommends: at-spi2-core (= 2.52.0-1build1)
Breaks: libatspi2.0-0 (<< 2.52.0-1build1)
Description: Assistive Technology Service Provider Interface - shared library
 This package contains the shared library for applications that wish to use
 the at-spi interface.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libatspi2.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 827
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: at-spi2-core
Version: 2.52.0-1build1
Replaces: gir-repository-dev
Provides: gir1.2-atspi-2.0-dev (= 2.52.0-1build1)
Depends: gir1.2-atspi-2.0 (= 2.52.0-1build1), gir1.2-dbus-1.0-dev, gir1.2-glib-2.0-dev, gir1.2-gobject-2.0-dev, libatspi2.0-0t64 (= 2.52.0-1build1), libglib2.0-dev, libdbus-1-dev, libxtst-dev
Description: Development files for the assistive technology service provider
 These are the development files for at-spi2, needed for compilation of
 programs which use it.
Homepage: https://wiki.gnome.org/Accessibility
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.2-1build1.1
Depends: libc6 (>= 2.4)
Conffiles:
 /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb
Description: extended attribute handling - shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: https://savannah.nongnu.org/projects/attr/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libaudit-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 17
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:3.1.2-2.1build1.1
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: libaudit1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 151
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:3.1.2-2.1build1.1
Depends: libaudit-common (>= 1:3.1.2-2.1build1.1), libc6 (>= 2.38), libcap-ng0 (>= 0.7.9)
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: libauthen-sasl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 119
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2.1700-1
Depends: perl:any
Suggests: libdigest-hmac-perl, libgssapi-perl
Description: Authen::SASL - SASL Authentication framework
 SASL is a generic mechanism for authentication used by several network
 protocols. Authen::SASL provides an implementation framework that all
 protocols should be able to share.
 .
 The framework allows different implementations of the connection class
 to be plugged in. At the time of writing there were two such plugins:
  - Authen::SASL::Perl
    This module implements several mechanisms and is implemented
    entirely in Perl.
  - Authen::SASL::XS
    This module uses the Cyrus SASL C-library (both version 1 and 2 are
    supported).
  - Authen::SASL::Cyrus
    This module is the predecessor to Authen::SASL::XS. Until version 2.16,
    Authen::SASL::Cyrus was loaded as an alternative to Authen::SASL::XS.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Authen-SASL

Package: libavahi-client3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-13ubuntu6.2
Depends: libavahi-common3 (= 0.8-13ubuntu6.2), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14)
Description: Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's C API which  allows you
 to integrate mDNS/DNS-SD functionality into your application.
Homepage: https://avahi.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libavahi-common-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-13ubuntu6.2
Description: Avahi common data files
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains common data files for avahi.
Homepage: https://avahi.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libavahi-common3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-13ubuntu6.2
Depends: libc6 (>= 2.38), libavahi-common-data (= 0.8-13ubuntu6.2)
Description: Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi common library, which is a set of common
 functions used by many of Avahis components and client applications.
Homepage: https://avahi.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libavc1394-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libavc1394
Version: 0.5.4-5build3
Depends: libc6 (>= 2.29), libraw1394-11 (>= 2.1.2)
Description: control IEEE 1394 audio/video devices
 libavc1394 is a programming interface for the 1394 Trade Association AV/C
 (Audio/Video Control) Digital Interface Command Set. It allows you to
 remote control camcorders and similar devices connected to your computer
 via an IEEE 1394 (aka Firewire) link.
 .
 This package includes the libraries needed to run executables using
 libavc1394.
Homepage: http://sourceforge.net/projects/libavc1394/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavcodec60
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16237
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libaom3 (>= 3.2.0), libavutil58 (= 7:6.1.1-3ubuntu5), libc6 (>= 2.35), libcairo2 (>= 1.2.4), libcodec2-1.2 (>= 1.2.0), libdav1d7 (>= 1.1.0), libglib2.0-0t64 (>= 2.12.0), libgsm1 (>= 1.0.18), libjxl0.7 (>= 0.7.0), liblzma5 (>= 5.1.1alpha+20120614), libmp3lame0 (>= 3.100), libopenjp2-7 (>= 2.0.0), libopus0 (>= 1.1), librav1e0 (>= 0.5.1), librsvg2-2 (>= 2.52.5), libshine3 (>= 3.1.0), libsnappy1v5 (>= 1.1.10), libspeex1 (>= 1.2~), libsvtav1enc1d1 (>= 1.7.0+dfsg), libswresample4 (>= 7:6.0), libtheora0 (>= 1.0), libtwolame0 (>= 0.3.10), libva2 (>= 2.9.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpl2 (>= 2023.3.0), libvpx9 (>= 1.12.0), libwebp7 (>= 1.3.2), libwebpmux3 (>= 1.3.2), libx264-164 (>= 2:0.164.3108+git31e19f9), libx265-199 (>= 3.5), libxvidcore4 (>= 1.2.2), libzvbi0t64 (>= 0.2.35), zlib1g (>= 1:1.2.0)
Suggests: libcuda1, libnvcuvid1, libnvidia-encode1
Description: FFmpeg library with de/encoders for audio/video codecs - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic encoding/decoding framework and
 contains multiple decoders and encoders for audio, video and subtitle streams,
 and several bitstream filters.
 .
 The shared architecture provides various services ranging from bit stream I/O
 to DSP optimizations, and makes it suitable for implementing robust and fast
 codecs as well as for experimentation.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavdevice60
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 270
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libasound2t64 (>= 1.0.16), libavc1394-0 (>= 0.5.3), libavcodec60 (>= 7:6.0), libavfilter9 (>= 7:6.0), libavformat60 (= 7:6.1.1-3ubuntu5), libavutil58 (= 7:6.1.1-3ubuntu5), libc6 (>= 2.34), libcaca0 (>= 0.99.beta20), libcdio-cdda2t64 (>= 10.2+2.0.0), libcdio-paranoia2t64 (>= 10.2+2.0.0), libdc1394-25 (>= 2.2.6), libdrm2 (>= 2.4.101), libgl1, libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libopenal1 (>= 1.14), libpulse0 (>= 0.99.1), libraw1394-11 (>= 2.1.2), libsdl2-2.0-0 (>= 2.0.12), libx11-6, libxcb-shape0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxv1
Description: FFmpeg library for handling input and output devices - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for grabbing from and rendering to
 many common multimedia input/output devices, and supports several input and
 output devices, including Video4Linux2, VfW, DShow, and ALSA.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavfilter9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 13300
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libass9 (>= 1:0.15.0), libavcodec60 (= 7:6.1.1-3ubuntu5), libavformat60 (>= 7:6.0), libavutil58 (= 7:6.1.1-3ubuntu5), libbs2b0 (>= 3.1.0+dfsg), libc6 (>= 2.38), libflite1 (>= 1.4-release-9~), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), libharfbuzz0b (>= 0.9.9), liblilv-0-0 (>= 0.14.2~dfsg0), libmysofa1 (>= 0.7~), libplacebo338 (>= 6.338.1), libpocketsphinx3 (>= 0.8.0+real5prealpha+1), libpostproc57 (>= 7:6.0), librubberband2 (>= 3.3.0+dfsg), libsphinxbase3t64 (>= 0.8+5prealpha), libstdc++6 (>= 13.1), libswresample4 (>= 7:6.0), libswscale7 (>= 7:6.0), libva2 (>= 1.7.3), libvidstab1.1, libvpl2 (>= 2023.3.0), libzimg2 (>= 0.3.1), libzmq5 (>= 3.2.3+dfsg), ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1, zlib1g (>= 1:1.1.4)
Description: FFmpeg library containing media filters - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic audio/video filtering framework containing
 several filters, sources and sinks.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavformat60
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2848
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libavcodec60 (= 7:6.1.1-3ubuntu5), libavutil58 (= 7:6.1.1-3ubuntu5), libbluray2 (>= 1:0.2.2), libbz2-1.0, libc6 (>= 2.35), libchromaprint1 (>= 1.3.2), libgme0 (>= 0.5.5), libgnutls30t64 (>= 3.8.1), libopenmpt0t64 (>= 0.3.0), librabbitmq4 (>= 0.6.0), librist4 (>= 0.2.6+dfsg), libsrt1.5-gnutls (>= 1.5.3), libssh-gcrypt-4 (>= 0.8.0), libxml2 (>= 2.7.4), libzmq5 (>= 4.0.1+dfsg), zlib1g (>= 1:1.2.0.2)
Description: FFmpeg library with (de)muxers for multimedia containers - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for multiplexing and demultiplexing
 (muxing and demuxing) audio, video and subtitle streams. It encompasses
 multiple muxers and demuxers for multimedia container formats. It also
 supports several input and output protocols to access a media resource.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavif-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 99
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libavif
Version: 1.0.4-1ubuntu3
Depends: libavif16 (= 1.0.4-1ubuntu3)
Description: Library for handling .avif files (development files)
 This library aims to be a friendly, portable C implementation of the AV1
 Image File Format as described in https://aomediacodec.github.io/av1-avif/.
 .
 This package provides the development files.
Homepage: https://github.com/AOMediaCodec/libavif
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavif16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 211
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libavif
Version: 1.0.4-1ubuntu3
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.34), libdav1d7 (>= 0.1.0), libgav1-1 (>= 0.18.0), librav1e0 (>= 0.5.1), libsharpyuv0 (>= 1.3.2), libsvtav1enc1d1 (>= 1.7.0+dfsg), libyuv0 (>= 0.0~git20221206)
Description: Library for handling .avif files
 This library aims to be a friendly, portable C implementation of the AV1
 Image File Format as described in https://aomediacodec.github.io/av1-avif/.
 .
 This package provides the shared library files.
Homepage: https://github.com/AOMediaCodec/libavif
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libavutil58
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1152
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libc6 (>= 2.35), libdrm2 (>= 2.4.66), libva-drm2 (>= 1.3), libva-x11-2 (>= 1.3), libva2 (>= 2.1.0), libvdpau1 (>= 0.2), libvpl2 (>= 2023.3.0), libx11-6, ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1
Description: FFmpeg library with functions for simplifying programming - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library is a utility library to aid portable multimedia programming.
 It contains safe portable string functions, random number generators, data
 structures, additional mathematics functions, cryptography and multimedia
 related functionality (like enumerations for pixel and sample formats).
 It is not a library for code needed by both libavcodec and libavformat.
 The goal for this library is to be modular, small, efficient and useful.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libbdplus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 122
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libbdplus
Version: 0.2.0-3build1
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.14)
Recommends: libaacs0
Enhances: libbluray2
Description: implementation of BD+ for reading Blu-ray Discs
 libbdplus is a research project to implement the BD+ System Specifications.
 It provides, through an open-source library, a way to understand how the BD+
 works.
 .
 This package DOES NOT provide any key, certificate, configuration
 file or virtual machine that could be used to decode encrypted
 copyrighted material.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libbdplus.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2350
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.42-4ubuntu2.10
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.38), libsframe1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.0), binutils-common (= 2.42-4ubuntu2.10)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
 This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libblas3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 689
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lapack
Version: 3.12.0-3build1.1
Provides: libblas.so.3
Depends: libc6 (>= 2.4), libgcc-s1 (>= 4.0)
Description: Basic Linear Algebra Reference implementations, shared library
 BLAS (Basic Linear Algebra Subroutines) is a set of efficient
 routines for most of the basic vector and matrix operations.
 They are widely used as the basis for other high quality linear
 algebra software, for example lapack and linpack.  This
 implementation is the Fortran 77 reference implementation found
 at netlib.
 .
 This package contains a shared version of the library.
Homepage: https://www.netlib.org/lapack/
Original-Maintainer: Debian Science Team <[email protected]>

Package: libblkid-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 945
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libblkid1 (= 2.39.3-9ubuntu6.5), libc6-dev | libc-dev, uuid-dev
Description: block device ID library - headers
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
 .
 This package contains the development environment for the blkid library.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 289
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libc6 (>= 2.38)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libbluray2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 387
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libbluray
Version: 1:1.3.4-1build1
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libudfread0 (>= 1.1.1), libxml2 (>= 2.7.4)
Recommends: libaacs0
Suggests: libbluray-bdj
Description: Blu-ray disc playback support library (shared library)
 libbluray is an open-source library designed for Blu-Ray Discs playback for
 media players, like VLC or MPlayer. This research project is developed by an
 international team of developers from Doom9. libbluray integrates navigation,
 playlist parsing, menus, and BD-J.
 .
 NB: Most commercial Blu-Ray are restricted by AACS or BD+ technologies and this
 library is not enough to playback those discs.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libbluray.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libbpf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 416
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libbpf (1.3.0-2build2)
Version: 1:1.3.0-2build2
Depends: libc6 (>= 2.38), libelf1t64 (>= 0.144), zlib1g (>= 1:1.2.3.3)
Description: eBPF helper library (shared library)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package contains the shared library.
Original-Maintainer: Sudip Mukherjee <[email protected]>

Package: libbrotli-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 984
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: brotli
Version: 1.1.0-2build2
Depends: libbrotli1 (= 1.1.0-2build2)
Description: library implementing brotli encoder and decoder (development files)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs development files.
Homepage: https://github.com/google/brotli
Original-Maintainer: Tomasz Buchert <[email protected]>

Package: libbrotli1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 843
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: brotli
Version: 1.1.0-2build2
Depends: libc6 (>= 2.29)
Description: library implementing brotli encoder and decoder (shared libraries)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs shared libraries.
Homepage: https://github.com/google/brotli
Original-Maintainer: Tomasz Buchert <[email protected]>

Package: libbs2b0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libbs2b
Version: 3.1.0+dfsg-7build1
Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1)
Description: Bauer stereophonic-to-binaural DSP library
 The Bauer stereophonic-to-binaural DSP (bs2b) is designed to improve
 headphone listening of stereo audio records.
 .
 Typical stereo recordings are made for listening with speakers.
 What's missing in headphones is the sound going from each channel
 to the opposite ear, arriving a short time later for the extra distance
 traveled, and with a bit of high frequency roll-off for the shadowing
 effect of the head. The time delay to the far ear should also be
 somewhat longer at low frequencies than at high frequencies. bs2b
 implements both of these ideas to transform stereophonic recordings
 for headphone listening.
Homepage: https://bs2b.sourceforge.net/
Original-Maintainer: Debian QA Group <[email protected]>

Package: libbsd-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 664
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.12.1-1build1.1
Replaces: libfreebsd-dev (<< 0.0-8)
Depends: libbsd0 (= 0.12.1-1build1.1), libmd-dev
Description: utility functions from BSD systems - development files
 This library provides some functions commonly available on BSD systems but
 not on others like GNU systems.
 .
 The currently provided functions are:
 .
  * _time32_to_time, _time_to_time32, _time64_to_time, _time_to_time64,
    _time_to_long, _long_to_time, _time_to_int, _int_to_time.
  * TIMEVAL_TO_TIMESPEC, TIMESPEC_TO_TIMEVAL.
  * MD5Data, MD5End, MD5File, MD5FileChunk, MD5Final, MD5Init, MD5Pad,
    MD5Transform, MD5Update.
  * arc4random, arc4random_addrandom, arc4random_buf, arc4random_stir,
    arc4random_uniform.
  * bsd_getopt.
  * be16dec, be32dec, be64dec, le16dec, le32dec, le64dec.
  * be16enc, be32enc, be64enc, le16enc, le32enc, le64enc.
  * bit_alloc, bit_decl, bit_clear, bit_ffc, bit_ffs, bit_nclear, bit_nset,
    bit_set, bitstr_size, bit_test.
  * closefrom.
  * expand_number, dehumanize_number, humanize_number.
  * explicit_bzero.
  * errc, verrc, vwarnc, warnc.
  * fmtcheck.
  * fgetln, fparseln, fgetwln, flopen, flopenat, fpurge, funopen.
  * freezero.
  * getbsize.
  * getmode, setmode, strmode,
  * getpeereid.
  * getprogname, setprogname.
  * gid_from_group, group_from_gid.
  * heapsort, radixsort, mergesort, sradixsort.
  * nlist (ELF and a.out support).
  * pidfile_open, ppidfile_filen, oidfile_write, pidfile_close, pidfile_remove.
  * readpassphrase.
  * reallocarray, reallocf, recallocarray.
  * setproctitle (initialized via libbsd-ctor or setproctitle_init).
  * sl_init, sl_add, sl_free, sl_find.
  * strlcpy, strlcat.
  * strnstr.
  * nvis, snvis, stravis, strenvisx, strnunvis, strnunvisx, strnvis, strnvisx,
    strsenvisx, strsnvis, strsnvisx, strsvis, strsvisx, strunvis, strunvisx,
    strvis, strvisx, svis, unvis, vis.
  * strtoi, strtonum, strtou.
  * timeradd, timersub, timerclear, timerisset, timercmp.
  * timespecadd, timespecsub, timespecclear, timespecisset, timespeccmp.
  * uid_from_user, user_from_uid.
  * wcslcat, wcslcpy.
 .
 Also included are some queue macro definitions not present on includes
 from glibc.
Homepage: https://libbsd.freedesktop.org/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.12.1-1build1.1
Depends: libc6 (>= 2.38), libmd0 (>= 1.0.3-2)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libbz2-1.0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-5.1build0.1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>
Homepage: https://sourceware.org/bzip2/

Package: libbz2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 98
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-5.1build0.1
Replaces: bzip2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-5.1build0.1), libc6-dev | libc-dev
Recommends: bzip2-doc
Description: high-quality block-sorting file compressor library - development
 Static libraries and include files for the bzip2 compressor library.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>
Homepage: https://sourceware.org/bzip2/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2183
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.39-0ubuntu8.7
Depends: libc6 (>> 2.39), libc6 (<< 2.40)
Suggests: manpages
Breaks: dh-lua (<< 27+nmu1~)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <[email protected]>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc-client2007e
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1375
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-7build3
Depends: libpam-modules, mlock, libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libssl3t64 (>= 3.0.0)
Suggests: uw-mailutils
Description: c-client library for mail protocols - library files
 IMAP (Internet Message Access Protocol) is a method of accessing
 electronic messages kept on a (possibly shared) mail server.
 .
 The UW (University of Washington) IMAP toolkit provides the c-client
 mail-handling library supporting various network transport methods,
 file system storage formats, and authentication and authorization
 methods.
 .
 This package contains the shared c-client library.
Homepage: http://www.washington.edu/imap/
Original-Maintainer: Magnus Holmgren <[email protected]>

Package: libc-client2007e-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1956
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-7build3
Replaces: libc-client-dev
Provides: libc-client-dev
Depends: krb5-multidev, libpam0g-dev, libssl-dev, libc-client2007e (= 8:2007f~dfsg-7build3)
Conflicts: libc-client-dev
Description: c-client library for mail protocols - development files
 IMAP (Internet Message Access Protocol) is a method of accessing
 electronic messages kept on a (possibly shared) mail server.
 .
 The UW (University of Washington) IMAP toolkit provides the c-client
 mail-handling library supporting various network transport methods,
 file system storage formats, and authentication and authorization
 methods.
 .
 This package contains the static c-client library and development
 headers.
Homepage: http://www.washington.edu/imap/
Original-Maintainer: Magnus Holmgren <[email protected]>

Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 106
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.39-0ubuntu8.7
Depends: libc6 (>> 2.39), libc6 (<< 2.40)
Recommends: manpages, manpages-dev, libc-devtools (>> 2.39)
Description: GNU C Library: Development binaries
 This package contains utility programs related to the GNU C Library
 development package.
 .
  * gencat: generate message catalogs
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <[email protected]>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 13431
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.39-0ubuntu8.7
Replaces: libc6-amd64
Depends: libgcc-s1
Recommends: libidn2-0 (>= 2.0.5~)
Suggests: glibc-doc, debconf | debconf-2.0, locales, libnss-nis, libnss-nisplus
Breaks: chrony (<< 4.2-3~), cyrus-imapd (<< 3.6.1-2ubuntu1), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), locales (<< 2.39), locales-all (<< 2.39), nscd (<< 2.39), python3-iptables (<< 1.0.0-2), scipy (<< 1.10.1-10build1), tinydns (<< 1:1.05-14), valgrind (<< 1:3.19.0-1~)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <[email protected]>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13112
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.39-0ubuntu8.7
Replaces: libc6 (<< 2.38-1ubuntu1)
Provides: libc-dev (= 2.39-0ubuntu8.7)
Depends: libc6 (= 2.39-0ubuntu8.7), libc-dev-bin (= 2.39-0ubuntu8.7), linux-libc-dev, libcrypt-dev, rpcsvc-proto
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.38), catch (<< 1.12.2-0.1), heimdal-multidev (<= 7.7.0+dfsg-4), igblast (<= 1.19.0-1), libassimp-dev (<= 5.2.4~ds0-1), libasyncns-dev (<= 0.8-6build2), libatm1-dev (<= 1:2.5.1-4), libaws20-dev (<= 20.2-2+b1), libboinc-app-dev (<= 7.20.2+dfsg-1), libbson-dev (<= 1.22.0-1), libc6-dev-amd64-cross (<< 2.39~), libcups2-dev (<= 2.4.2-1), libdeal.ii-dev (<= 9.4.0-1), libdkim-dev (<= 1:1.0.21-4build3), libdolfin-dev-common (<= 2019.2.0~git20220407.d29e24d-5), libeckit-dev (<= 1.20.0-1), libfclib-dev (<= 3.1.0+dfsg-2), libfltk1.3-dev (<= 1.3.8-4+b1), libghc-resolv-dev (<= 0.1.2.0-3), libghc-resolv-prof (<= 0.1.2.0-3), libglib2.0-dev (<= 2.72.3-1), libgloox-dev (<= 1.0.24-2+b1), libhesiod-dev (<= 3.2.1-3.1+b1), libinfinity-0.7-dev (<= 0.7.2-1build1), libinsighttoolkit4-dev (<= 4.13.3withdata-dfsg2-3+b1), libinsighttoolkit5-dev (<= 5.2.1-5+b1), libismrmrd-dev (<= 1.8.0-2), libldap-dev (<= 2.5.12+dfsg-2), liblog4cplus-dev (<= 2.0.7-1), libloudmouth1-dev (<= 1.5.4-1), libmgl-dev (<= 8.0.1-2), libmimalloc2.0 (<= 2.0.6+ds-1), libminc-dev (<= 2.4.03-5), libmongoc-dev (<= 1.22.1-1), libmrpt-ros1bridge-dev (<= 1:2.4.9+ds-4+b2), libmysqlclient-dev (<= 8.0.29-1), libnetcdf-dev (<= 1:4.9.0-3), libnetcdf-mpi-dev (<= 1:4.9.0-1), libnetcdf-pnetcdf-dev (<= 1:4.9.0-1), libnfsidmap-dev (<= 1:2.6.1-2), libns3-dev (<= 3.36.1+dfsg-4), libola-dev (<= 0.10.8.nojsmin-2), libopenafs-dev (<= 1.8.8.1-3), libopendkim-dev (<= 2.11.0~beta2-7), libopendmarc-dev (<= 1.4.2-1), libopenms-dev (<= 2.6.0+cleaned1-3build4), libopenzwave1.6-dev (<= 1.6.1914+ds-1), libpg-query-dev (<= 13-2.1.2-2), librbl-dev (<= 2.11.0~beta2-7), libre-dev (<= 1.1.0-1build1), libshishi-dev (<= 1.0.2-11), libslurm-dev (<= 21.08.8.2-1), libsocksd0-dev (<= 1.4.2+dfsg-7build7), libspf2-dev (<= 1.2.10-7.1+b1), libstrophe-dev (<= 0.12.1-2), libtaningia-dev (<= 0.2.2-2), libtrilinos-amesos-dev (<= 13.2.0-3), libtrilinos-amesos2-dev (<= 13.2.0-3), libtrilinos-anasazi-dev (<= 13.2.0-3), libtrilinos-aztecoo-dev (<= 13.2.0-3), libtrilinos-belos-dev (<= 13.2.0-3), libtrilinos-epetra-dev (<= 13.2.0-3), libtrilinos-epetraext-dev (<= 13.2.0-3), libtrilinos-galeri-dev (<= 13.2.0-3), libtrilinos-ifpack-dev (<= 13.2.0-3), libtrilinos-ifpack2-dev (<= 13.2.0-3), libtrilinos-intrepid-dev (<= 13.2.0-3), libtrilinos-intrepid2-dev (<= 13.2.0-3), libtrilinos-isorropia-dev (<= 13.2.0-3), libtrilinos-kokkos-dev (<= 13.2.0-3), libtrilinos-kokkos-kernels-dev (<= 13.2.0-3), libtrilinos-komplex-dev (<= 13.2.0-3), libtrilinos-ml-dev (<= 13.2.0-3), libtrilinos-moertel-dev (<= 13.2.0-3), libtrilinos-muelu-dev (<= 13.2.0-3), libtrilinos-nox-dev (<= 13.2.0-3), libtrilinos-phalanx-dev (<= 13.2.0-3), libtrilinos-pike-dev (<= 13.2.0-3), libtrilinos-piro-dev (<= 13.2.0-3), libtrilinos-pliris-dev (<= 13.2.0-3), libtrilinos-rol-dev (<= 13.2.0-3), libtrilinos-rtop-dev (<= 13.2.0-3), libtrilinos-rythmos-dev (<= 13.2.0-3), libtrilinos-sacado-dev (<= 13.2.0-3), libtrilinos-shylu-dev (<= 13.2.0-3), libtrilinos-stokhos-dev (<= 13.2.0-3), libtrilinos-stratimikos-dev (<= 13.2.0-3), libtrilinos-teko-dev (<= 13.2.0-3), libtrilinos-teuchos-dev (<= 13.2.0-3), libtrilinos-thyra-dev (<= 13.2.0-3), libtrilinos-tpetra-dev (<= 13.2.0-3), libtrilinos-trilinoscouplings-dev (<= 13.2.0-3), libtrilinos-triutils-dev (<= 13.2.0-3), libtrilinos-xpetra-dev (<= 13.2.0-3), libtrilinos-zoltan2-dev (<= 13.2.0-3), libvbr-dev (<= 2.11.0~beta2-7), libvisp-dev (<= 3.5.0-2+b1), libvotca-dev (<= 2022-3), libvtk6-dev (<= 6.3.0+dfsg2-8.1+b1), libvtk7-dev (<= 7.1.1+dfsg2-10.2), open-vm-tools-dev (<= 2:12.0.5-2), pidgin-librvp (<= 0.9.7cvs-3), proftpd-dev (<= 1.3.7d+dfsg-2), slurm-wlm-basic-plugins-dev (<= 21.08.8.2-1)
Conflicts: libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <[email protected]>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: libcaca0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 885
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcaca
Version: 0.99.beta20-4ubuntu0.2
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libslang2 (>= 2.2.4), libstdc++6 (>= 13.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Description: colour ASCII art library
 libcaca is the Colour AsCii Art library. It provides high level functions
 for colour text drawing, simple primitives for line, polygon and ellipse
 drawing, as well as powerful image to text conversion routines.
 .
 This package contains the shared library for libcaca.
Homepage: http://caca.zoy.org/wiki/libcaca
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libcairo-gobject2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 195
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.18.0-3build1
Depends: libcairo2 (= 1.18.0-3build1), libglib2.0-0t64 (>= 2.68.0)
Description: Cairo 2D vector graphics library (GObject library)
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends.
 .
 This package contains the GObject library, providing wrapper GObject types
 for all cairo types.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://cairographics.org/

Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1350
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.18.0-3build1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.11.1), libpixman-1-0 (>= 0.40.0), libpng16-16t64 (>= 1.6.2), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Description: Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://cairographics.org/

Package: libcap-ng0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.8.4-2build2
Depends: libc6 (>= 2.38)
Description: alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains dynamic libraries for libcap-ng.
Homepage: https://people.redhat.com/sgrubb/libcap-ng
Original-Maintainer: Håvard F. Aasen <[email protected]>

Package: libcap2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 1:2.66-5ubuntu2.4
Depends: libc6 (>= 2.38)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <[email protected]>

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 136
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.66-5ubuntu2.4
Replaces: libcap-bin
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.63)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <[email protected]>

Package: libcbor0.10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcbor
Version: 0.10.2-1.2ubuntu2
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
 CBOR is a general-purpose schema-less binary data format, defined in
 RFC 7049. This package provides a C library for parsing and generating
 CBOR. The main features are:
 .
  - Complete RFC conformance
  - Robust C99 implementation
  - Layered architecture offers both control and convenience
  - Flexible memory management
  - No shared global state - threading friendly
  - Proper handling of UTF-8
  - Full support for streams & incremental processing
  - Extensive documentation and test suite
  - No runtime dependencies, small footprint
 .
 This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor
Original-Maintainer: Vincent Bernat <[email protected]>

Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
 libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libcdio-cdda2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcdio-paranoia
Version: 10.2+2.0.1-1.1build2
Replaces: libcdio-cdda2
Provides: libcdio-cdda2 (= 10.2+2.0.1-1.1build2)
Depends: libc6 (>= 2.33), libcdio19 (>= 2.1.0)
Breaks: libcdio-cdda2 (<< 10.2+2.0.1-1.1build2)
Description: library to read and control digital audio CDs
 This library is made to read and control digital audio CDs. It does
 not play such CDs, it only reads them digitally. As it uses libcdio as
 a backend, it supports the same kind of CDROM drives (and images) as
 libcdio.
Homepage: https://www.gnu.org/software/libcdio/
Original-Maintainer: Philippe SWARTVAGHER <[email protected]>

Package: libcdio-paranoia2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcdio-paranoia
Version: 10.2+2.0.1-1.1build2
Replaces: libcdio-paranoia2
Provides: libcdio-paranoia2 (= 10.2+2.0.1-1.1build2)
Depends: libc6 (>= 2.14), libcdio-cdda2t64 (>= 10.2+2.0.0), libcdio19 (>= 2.1.0)
Breaks: libcdio-paranoia2 (<< 10.2+2.0.1-1.1build2)
Description: library to read digital audio CDs with error correction
 This library is made to read digital audio CDs, with error
 correction. It does its best to correct errors and jitter that happen
 when reading such discs. As it uses libcdio as a backend, it supports
 the same kind of CDROM drives (and images) as libcdio.
Homepage: https://www.gnu.org/software/libcdio/
Original-Maintainer: Philippe SWARTVAGHER <[email protected]>

Package: libcdio19t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 181
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcdio
Version: 2.1.0-4.1ubuntu1.2
Replaces: libcdio19
Provides: libcdio19 (= 2.1.0-4.1ubuntu1.2)
Depends: libc6 (>= 2.33)
Breaks: libcdio19 (<< 2.1.0-4.1ubuntu1.2)
Description: library to read and control CD-ROM
 This library is to encapsulate CD-ROM reading and
 control. Applications wishing to be oblivious of the OS- and
 device-dependant properties of a CD-ROM can use this library.
 .
 Some support for disk image types like BIN/CUE and NRG is available,
 so applications that use this library also have the ability to read
 disc images as though they were CD's.
Homepage: https://www.gnu.org/software/libcdio/
Original-Maintainer: Gabriel F. T. Gomes <[email protected]>

Package: libcgi-fast-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 1:2.17-1
Depends: perl:any, libcgi-pm-perl, libfcgi-perl
Description: CGI subclass for work with FCGI
 CGI::Fast is a subclass of the CGI object created by CGI.pm. It is
 specialized to work with the FCGI module, which greatly speeds up CGI scripts
 by turning them into persistently running server processes. Scripts that
 perform time-consuming initialization processes, such as loading large
 modules or opening persistent database connections, will see large
 performance improvements.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/CGI-Fast

Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 444
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 4.63-1
Depends: perl:any, libhtml-parser-perl, liburi-perl
Recommends: libcgi-fast-perl
Description: module for Common Gateway Interface applications
 CGI.pm is a Perl module that provides classes useful for creating Web forms
 and for parsing their contents. It defines CGI objects, entities that contain
 the values of the current query string and other state variables.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/CGI

Package: libchromaprint1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: chromaprint
Version: 1.5.1-5
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
Description: audio fingerprint library
 Chromaprint is a library for calculating audio fingerprints
 which are used by the Acoustid service. Its main purpose is to provide an
 accurate identifier for record tracks
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>
Homepage: https://acoustid.org/chromaprint

Package: libcjson1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cjson
Version: 1.7.17-1
Depends: libc6 (>= 2.14)
Description: Ultralightweight JSON parser in ANSI C
 cJSON is a ultralightweight json parse.
 .
 It aims to be the dumbest possible parser that you can get your job done with.
 .
 It's a single file of C, and a single header file.
 .
 This package contains the shared libraries.
Original-Maintainer: Boyuan Yang <[email protected]>
Homepage: https://github.com/DaveGamble/cJSON

Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 0.46-1build3
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.14)
Description: module for recursively copying Perl datatypes
 The Clone module provides a clone() method which makes recursive copies of
 nested hash, array, scalar and reference types, including tied variables and
 objects.
 .
 It is faster (although less flexible) than Storable's dclone. Its
 functionality is _not_ serializing in-memory objects (i.e. as
 Data::Dumper or YAML::Dump do), but deep-copying them over to new
 in-memory structures.
Homepage: https://metacpan.org/release/Clone
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libcodec2-1.2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16462
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: codec2
Version: 1.2.0-2build1
Depends: libc6 (>= 2.32)
Description: Codec2 runtime library
 Next-Generation Digital Voice for Two-Way Radio
 .
 Codec2 is an audio codec especially designed for compressing voice at
 very low bit-rates for applications such as digital voice radio.
 .
 This package contains the codec2 runtime library.
Homepage: http://rowetel.com/codec2.html
Original-Maintainer: A. Maitland Bottoms <[email protected]>

Package: libcolord2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 601
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: colord
Version: 1.4.7-1build2
Depends: libc6 (>= 2.29), libglib2.0-0t64 (>= 2.79.0), liblcms2-2 (>= 2.6), libudev1 (>= 196)
Suggests: colord
Description: system service to manage device colour profiles -- runtime
 colord is a system service that makes it easy to manage, install and generate
 colour profiles to accurately colour manage input and output devices.
 .
 It provides a D-Bus API for system frameworks to query, a persistent data
 store, and a mechanism for session applications to set system policy.
 .
 This package contains a gobject-based convenience library for programs to
 interact with the colord system daemon.
Homepage: https://www.freedesktop.org/software/colord/
Original-Maintainer: Debian freedesktop.org maintainers <[email protected]>

Package: libcom-err2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.47.0-2.4~exp1ubuntu4.1
Replaces: libcom-err2t64, libcomerr2 (<< 1.43.9-1~)
Provides: libcom-err2t64 (= 1.47.0-2.4~exp1ubuntu4.1), libcomerr2 (= 1.47.0-2.4~exp1ubuntu4.1)
Depends: libc6 (>= 2.38)
Breaks: libcom-err2t64 (<< 1.47.0-2.4~exp1), libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: libconfig-inifiles-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 116
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.000003-2
Description: read .ini-style configuration files
 Config::IniFiles provides a way to have readable configuration files
 outside your Perl script. Configurations can be imported (inherited,
 stacked, ...), sections can be grouped, and settings can be accessed
 from a tied hash.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Config-IniFiles/

Package: libcrypt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 344
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.36-4build1
Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1)
Provides: libcrypt1-dev
Depends: libcrypt1 (= 1:4.4.36-4build1)
Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1)
Conflicts: libcrypt1-dev, libcrypt2-dev
Description: libcrypt development files
 This package contains the files needed for developing applications that
 use libcrypt.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: libcrypt1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 226
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.36-4build1
Replaces: libc6 (<< 2.29-4)
Depends: libc6 (>= 2.38)
Conflicts: libpam0g (<< 1.4.0-10)
Description: libcrypt shared library
 libxcrypt is a modern library for one-way hashing of passwords.
 It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and
 bcrypt-based password hashes
 It provides the traditional Unix 'crypt' and 'crypt_r' interfaces,
 as well as a set of extended interfaces like 'crypt_gensalt'.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: libcryptsetup12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 623
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:2.7.0-1ubuntu4.2
Depends: libargon2-1 (>= 0~20171227), libblkid1 (>= 2.17.2), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.98), libjson-c5 (>= 0.15), libssl3t64 (>= 3.0.0), libuuid1 (>= 2.16)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup
Original-Maintainer: Debian Cryptsetup Team <[email protected]>

Package: libct4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 407
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: freetds
Version: 1.3.17+ds-2build3
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30t64 (>= 3.8.1), libgssapi-krb5-2 (>= 1.17), libhogweed6t64, libnettle8t64, freetds-common
Description: libraries for connecting to MS SQL and Sybase SQL servers
 FreeTDS is an implementation of the Tabular DataStream protocol, used for
 connecting to MS SQL and Sybase servers over TCP/IP.
 .
 This package includes the shared libraries for the Sybase CT-Lib API.
 You will need this if you plan to connect to MS SQL or Sybase servers, or use
 the PHP sybase or Perl DBD::Sybase extensions.
Homepage: http://www.freetds.org/
Original-Maintainer: Joseph Nahmias <[email protected]>

Package: libctf-nobfd0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 308
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.42-4ubuntu2.10
Replaces: libbinutils (<< 2.33.50.20191128-1~)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Breaks: libbinutils (<< 2.33.50.20191128-1~)
Description: Compact C Type Format library (runtime, no BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libctf0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 232
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.42-4ubuntu2.10
Depends: libbinutils (= 2.42-4ubuntu2.10), libc6 (>= 2.33), zlib1g (>= 1:1.2.0)
Description: Compact C Type Format library (runtime, BFD dependency)
 This package includes the libctf shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libcups2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 701
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.4.7-1.2ubuntu7.13
Replaces: libcups2
Provides: libcups2 (= 2.4.7-1.2ubuntu7.13)
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.38), libgnutls30t64 (>= 3.8.1), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0)
Suggests: cups-common
Breaks: libcups2 (<< 2.4.7-1.2ubuntu7.13)
Description: Common UNIX Printing System(tm) - Core library
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides the base shared libraries for CUPS.
Homepage: https://github.com/OpenPrinting/cups/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: libcurl3t64-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 907
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.5.0-2ubuntu10.9
Replaces: libcurl3-gnutls
Provides: libcurl3-gnutls (= 8.5.0-2ubuntu10.9)
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.36), libgnutls30t64 (>= 3.8.2), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnettle8t64, libnghttp2-14 (>= 1.50.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh-4 (>= 0.9.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Breaks: libcurl3-gnutls (<< 8.5.0-2ubuntu10.9)
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: https://curl.se/
Original-Maintainer: Debian Curl Maintainers <[email protected]>

Package: libcurl4-openssl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1917
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.5.0-2ubuntu10.9
Provides: libcurl-dev, libcurl-ssl-dev, libcurl3-dev, libcurl3-openssl-dev, libcurl4-dev
Depends: libcurl4t64 (= 8.5.0-2ubuntu10.9)
Suggests: libcurl4-doc, libidn-dev, libkrb5-dev, libldap2-dev, librtmp-dev, libssh2-1-dev, libssl-dev, pkg-config, zlib1g-dev
Conflicts: libcurl4-gnutls-dev, libssl1.0-dev
Description: development files and documentation for libcurl (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 This package provides the development files (ie. includes, static library,
 manual pages) that allow one to build software which uses libcurl.
 .
 SSL support is provided by OpenSSL.
Homepage: https://curl.se/
Original-Maintainer: Debian Curl Maintainers <[email protected]>

Package: libcurl4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 926
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.5.0-2ubuntu10.9
Replaces: libcurl3, libcurl4
Provides: libcurl4 (= 8.5.0-2ubuntu10.9)
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnghttp2-14 (>= 1.50.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh-4 (>= 0.9.0), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Breaks: libcurl4 (<< 8.5.0-2ubuntu10.9)
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: https://curl.se/
Original-Maintainer: Debian Curl Maintainers <[email protected]>

Package: libdata-dump-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 1.25-1
Depends: perl:any
Description: Perl module to help dump data structures
 Data::Dump provides a single function called dump that takes a list of values
 as its argument and produces a string as its result. The string contains Perl
 code that, when evaled, produces a deep copy of the original arguments. The
 string is formatted for easy reading.
 .
 If called in void context, the dump is printed on standard error instead of
 being returned. If you don't like importing a function that overrides Perl's
 not-so-useful builtin, then you can also import the same function as "pp"
 (the mnemonic for "pretty-print").
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Data-Dump

Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdatrie
Version: 0.2.13-3build1
Depends: libc6 (>= 2.14)
Description: Double-array trie library
 This package provides shared libraries needed to run programs that use the
 datrie library. It is usually automatically installed.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <[email protected]>

Package: libdav1d-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 130
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.4.1-1build1
Depends: libdav1d7 (= 1.4.1-1build1)
Description: fast and small AV1 video stream decoder (development files)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the development files for libdav1d.
Homepage: https://www.videolan.org/projects/dav1d.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libdav1d7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1702
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.4.1-1build1
Depends: libc6 (>= 2.34)
Description: fast and small AV1 video stream decoder (shared library)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/projects/dav1d.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libdb5.3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1761
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28+dfsg2-7
Replaces: libdb5.3
Provides: libdb5.3 (= 5.3.28+dfsg2-7)
Depends: libc6 (>= 2.38)
Breaks: libdb5.3 (<< 5.3.28+dfsg2-7)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Original-Maintainer: Debian QA Group <[email protected]>
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: libdbd-mysql-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 243
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 4.052-1ubuntu3
Depends: perl (>= 5.38.2-3.2build1), perl-dbdabi-94, perlapi-5.38.2, libc6 (>= 2.38), libmysqlclient21 (>= 8.0.11), libdbi-perl
Description: Perl5 database interface to the MariaDB/MySQL database
 DBD::mysql is the Perl5 Database Interface driver for the MariaDB/MySQL
 database. In other words: DBD::mysql is an interface between the Perl
 programming language and the MySQL programming API that comes with the
 MariaDB/MySQL relational database management system. Most functions provided by
 this programming API are supported. Some rarely used functions are
 missing, mainly because no one ever requested them. However supported
 features include: compression of data between server and client; timeouts;
 SSL; prepared statement support; server administration such as creating
 and dropping databases and restarting the server; auto-reconnection;
 utf8; bind type guessing; bind comment placeholders; automated insert ids;
 transactions; multiple result sets and multithreading.
Homepage: https://dbi.perl.org/
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libdbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2097
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 1.643-4build3
Provides: dh-sequence-perl-dbi, perl-dbdabi-94
Depends: perl (>= 5.38.2-3.2build1), perlapi-5.38.2, libc6 (>= 2.38)
Suggests: libclone-perl, libmldbm-perl, libnet-daemon-perl, libsql-statement-perl
Breaks: libdbd-anydata-perl (<< 0.11+)
Description: Perl Database Interface (DBI)
 DBI (DataBase Interface) is a Perl framework that provides a common interface
 to access various backend databases in a uniform manner. DBD (DataBase Driver)
 modules provide implementations for various backend data storage mechanisms
 including networked relational databases (particularly SQL databases) and even
 web services such as the Google search engine.
 .
 It is extremely portable and available for a wide range of operating systems,
 architectures and data stores, including:
 .
  * Oracle
  * Microsoft SQL Server
  * IBM DB2
  * SQLite
  * PostgreSQL
  * Firebird
  * MySQL
Homepage: https://dbi.perl.org/
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 442
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.14.10-4ubuntu4.1
Depends: libc6 (>= 2.38), libsystemd0
Recommends: dbus
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The message bus daemon can be found in the dbus-daemon package.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libdbus-1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 983
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.14.10-4ubuntu4.1
Depends: libdbus-1-3 (= 1.14.10-4ubuntu4.1), pkgconf, xml-core (>= 0.14)
Description: simple interprocess messaging system (development headers)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: https://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libdbus-glib-1-2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 203
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dbus-glib
Version: 0.112-3build2
Depends: libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.32.0)
Description: deprecated library for D-Bus IPC
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a deprecated GLib-based shared library for
 applications using the GLib interface to D-Bus. New code should use
 GDBus, part of GLib, instead.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libdc1394-25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 251
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdc1394
Version: 2.2.6-4build1
Depends: libc6 (>= 2.34), libraw1394-11 (>= 2.1.2), libusb-1.0-0 (>= 2:1.0.9)
Description: high level programming interface for IEEE 1394 digital cameras
 libdc1394 is a library that is intended to provide a high level
 programming interface for application developers who wish to control
 IEEE 1394 based cameras that conform to the 1394-based Digital Camera
 Specification (found at http://www.1394ta.org/).
 .
 This version of libdc1394 supports both the old and new (juju) FireWire stack.
 It automatically detects which one to use at runtime.
 .
 This package contains shared libraries.
Homepage: https://sourceforge.net/projects/libdc1394/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libdconf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: dconf
Version: 0.40.0-4ubuntu0.1
Depends: libc6 (>= 2.4), libglib2.0-0t64 (>= 2.79.0)
Description: simple configuration storage system - runtime library
 DConf is a low-level key/value database designed for storing desktop
 environment settings.
 .
 This package contains the runtime library.
Homepage: https://wiki.gnome.org/Projects/dconf
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libde265-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 375
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.15-1build3
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
Description: Open H.265 video codec implementation
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
Homepage: https://github.com/strukturag/libde265
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libde265-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 46
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.15-1build3
Depends: libde265-0 (= 1.0.15-1build3)
Description: Open H.265 video codec implementation - development files
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
 .
 The development headers for compiling programs that use libde265
 are provided by this package.
Homepage: https://github.com/strukturag/libde265
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libdebconfclient0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 38
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.271ubuntu3
Depends: libc6 (>= 2.38)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.
Original-Maintainer: Debian Install System Team <[email protected]>

Package: libdecor-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdecor-0
Version: 0.2.2-1build2
Replaces: libdecor
Depends: libc6 (>= 2.38), libwayland-client0 (>= 1.20.0)
Recommends: default-libdecor-0-plugin-1 | libdecor-0-plugin-1
Conflicts: libdecor
Description: client-side window decoration library
 libdecor is a library that can help Wayland clients draw window
 decorations for them. It aims to provide multiple backends that implements the
 decoration drawing.
 .
 This package contains the runtime library.
Homepage: https://gitlab.freedesktop.org/libdecor/libdecor
Original-Maintainer: Debian SDL packages maintainers <[email protected]>

Package: libdecor-0-plugin-1-gtk
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdecor-0
Version: 0.2.2-1build2
Replaces: libdecor-plugin-gtk
Provides: default-libdecor-0-plugin-1, libdecor-0-plugin-1
Depends: libc6 (>= 2.38), libcairo2 (>= 1.14.0), libdbus-1-3 (>= 1.9.14), libdecor-0-0 (= 0.2.2-1build2), libglib2.0-0t64 (>= 2.12.0), libgtk-3-0t64 (>= 3.19.12), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.18)
Conflicts: libdecor-plugin-gtk
Description: libdecor decoration plugin using GTK
 libdecor is a library that can help Wayland clients draw window
 decorations for them. It aims to provide multiple backends that implements the
 decoration drawing.
 .
 This package contains a backend that draws window decorations using GTK.
Homepage: https://gitlab.freedesktop.org/libdecor/libdecor
Original-Maintainer: Debian SDL packages maintainers <[email protected]>

Package: libdeflate-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 137
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.19-1build1.1
Depends: libdeflate0 (= 1.19-1build1.1)
Description: headers for whole-buffer compression and decompression library
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
 .
 This package provides the development headers.
Homepage: https://github.com/ebiggers/libdeflate
Original-Maintainer: Debian Med Packaging Team <[email protected]>

Package: libdeflate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.19-1build1.1
Depends: libc6 (>= 2.14)
Description: fast, whole-buffer DEFLATE-based compression and decompression
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
Homepage: https://github.com/ebiggers/libdeflate
Original-Maintainer: Debian Med Packaging Team <[email protected]>

Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.16-3ubuntu3.2)
Version: 2:1.02.185-3ubuntu3.2
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.97)
Description: Linux Kernel Device Mapper event support library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the userspace library to help with event monitoring
 for devmapper devices, in conjunction with the dmevent daemon.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <[email protected]>

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 472
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.16-3ubuntu3.2)
Version: 2:1.02.185-3ubuntu3.2
Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~), libudev1 (>= 183)
Recommends: dmsetup (>= 2:1.02.185-3ubuntu3.2~)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <[email protected]>

Package: libdjvulibre-text
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 340
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: djvulibre
Version: 3.5.28-2ubuntu0.24.04.2
Replaces: djview3 (= 3.5.20-9), djvulibre-desktop (<< 3.5.20-9), libdjvulibre15
Description: Linguistic support files for libdjvulibre
 Runtime linguistic support files for the libdjvulibre library.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <[email protected]>

Package: libdjvulibre21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1730
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: djvulibre
Version: 3.5.28-2ubuntu0.24.04.2
Replaces: libdjvulibre1, libdjvulibre15
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libjpeg8 (>= 8c), libstdc++6 (>= 5), libdjvulibre-text (>= 3.5.28-2ubuntu0.24.04.2)
Conflicts: libdjvulibre1
Description: Runtime support for the DjVu image format
 DjVu runtime library.
Homepage: http://djvu.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <[email protected]>

Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1612
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.22.6ubuntu6.6
Depends: perl:any, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils (>= 5.4.0)
Suggests: debian-keyring, gnupg | sq | sqop | pgpainless-cli | sequoia-chameleon-gnupg, gpgv | sq | sqop | pgpainless-cli | sequoia-chameleon-gnupg, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr
Breaks: dgit (<< 3.13~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), pkg-kde-tools (<< 0.15.28~), sq (<< 0.33.0~), sqop (<< 0.27.2~)
Description: Dpkg perl modules
 This package provides the perl modules used by the scripts
 in dpkg-dev. They cover a wide range of functionality. Among them
 there are the following public modules:
 .
  - Dpkg: core variables
  - Dpkg::Arch: architecture handling functions
  - Dpkg::BuildFlags: set, modify and query compilation build flags
  - Dpkg::BuildInfo: build information functions
  - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
  - Dpkg::BuildProfiles: parse and manipulate build profiles
  - Dpkg::Changelog: parse changelogs
  - Dpkg::Changelog::Entry: represents a changelog entry
  - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
  - Dpkg::Checksums: generate and parse checksums
  - Dpkg::Compression: simple database of available compression methods
  - Dpkg::Compression::FileHandle: transparently (de)compress files
  - Dpkg::Compression::Process: wrapper around compression tools
  - Dpkg::Conf: parse dpkg configuration files
  - Dpkg::Control: parse and manipulate Debian control information
    (.dsc, .changes, Packages/Sources entries, etc.)
  - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
  - Dpkg::Control::Fields: manage (list of known) control fields
  - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
  - Dpkg::Control::Info: parse files like debian/control
  - Dpkg::Control::Tests: parse files like debian/tests/control
  - Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza
  - Dpkg::Deps: parse and manipulate dependencies
  - Dpkg::Deps::Simple: represents a single dependency statement
  - Dpkg::Deps::Multiple: base module to represent multiple dependencies
  - Dpkg::Deps::Union: list of unrelated dependencies
  - Dpkg::Deps::AND: list of AND dependencies
  - Dpkg::Deps::OR: list of OR dependencies
  - Dpkg::Deps::KnownFacts: list of installed and virtual packages
  - Dpkg::Exit: push, pop and run exit handlers
  - Dpkg::Gettext: wrapper around Locale::gettext
  - Dpkg::IPC: spawn sub-processes and feed/retrieve data
  - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
    example)
  - Dpkg::Interface::Storable: base object serializer
  - Dpkg::Path: common path handling functions
  - Dpkg::Source::Format: manipulate debian/source/format files
  - Dpkg::Source::Package: extract Debian source packages
  - Dpkg::Substvars: substitute variables in strings
  - Dpkg::Vendor: identify current distribution vendor
  - Dpkg::Version: parse and manipulate Debian package versions
 .
 All the packages listed in Suggests or Recommends are used by some of the
 modules.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <[email protected]>

Package: libdrm-amdgpu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.125-1ubuntu0.1~24.04.1
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.108)
Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: libdrm
Version: 2.4.125-1ubuntu0.1~24.04.1
Description: Userspace interface to kernel DRM services -- common files
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides common files for libdrm.
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm-intel1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 174
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.125-1ubuntu0.1~24.04.1
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.108), libpciaccess0
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.125-1ubuntu0.1~24.04.1
Depends: libdrm-common (>= 2.4.125-1ubuntu0.1~24.04.1), libc6 (>= 2.38)
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libduktape207
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 324
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: duktape
Version: 2.7.0+tests-0ubuntu3
Depends: libc6 (>= 2.38)
Description: embeddable Javascript engine, library
 Duktape is an embeddable Javascript engine, with a focus on portability
 and compact footprint.
 .
 Duktape is easy to integrate into a C/C++ project: add duktape.c, duktape.h,
 and duk_config.h to your build, and use the Duktape API to call Ecmascript
 functions from C code and vice versa.
 .
 This package contains the shared library.
Homepage: https://duktape.org
Original-Maintainer: Debian IoT Maintainers <[email protected]>

Package: libdw1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 766
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.190-1.1ubuntu0.1
Replaces: libdw1
Provides: libdw1 (= 0.190-1.1ubuntu0.1)
Depends: libbz2-1.0, libc6 (>= 2.38), libelf1t64 (= 0.190-1.1ubuntu0.1), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2.3)
Breaks: libdw1 (<< 0.190-1.1ubuntu0.1)
Description: library that provides access to the DWARF debug information
 libdw1t64 provides a library that provides access to DWARF debug information
 stored inside ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Debian Elfutils Maintainers <[email protected]>

Package: libedit-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 498
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20230828-1build1
Depends: libedit2 (= 3.1-20230828-1build1), libbsd-dev (>= 0.1.3), libncurses-dev | libtinfo-dev
Description: BSD editline and history libraries (development files)
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/
Original-Maintainer: LLVM Packaging Team <[email protected]>

Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20230828-1build1
Replaces: libedit-dev (<< 3.1-20180525-2~)
Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.38), libtinfo6 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/
Original-Maintainer: LLVM Packaging Team <[email protected]>

Package: libefiboot1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 38-3.1build1
Replaces: libefiboot1
Provides: libefiboot1 (= 38-3.1build1)
Depends: libc6 (>= 2.38), libefivar1t64 (>= 38)
Breaks: libefiboot1 (<< 38-3.1build1)
Description: Library to manage UEFI variables
 Library to allow for the manipulation of UEFI variables related to booting.
Homepage: https://github.com/rhinstaller/efivar
Original-Maintainer: Debian UEFI Maintainers <[email protected]>

Package: libefivar1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 214
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 38-3.1build1
Replaces: libefivar1
Provides: libefivar1 (= 38-3.1build1)
Depends: libc6 (>= 2.38)
Breaks: libefivar1 (<< 38-3.1build1)
Description: Library to manage UEFI variables
 Library to allow for the simple manipulation of UEFI variables.
Homepage: https://github.com/rhinstaller/efivar
Original-Maintainer: Debian UEFI Maintainers <[email protected]>

Package: libelf1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 204
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.190-1.1ubuntu0.1
Replaces: libelf1
Provides: libelf1 (= 0.190-1.1ubuntu0.1)
Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Breaks: libelf1 (<< 0.190-1.1ubuntu0.1)
Description: library to read and write ELF files
 The libelf1t64 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/
Original-Maintainer: Debian Elfutils Maintainers <[email protected]>

Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.05-3
Depends: perl:any
Description: utility to determine the locale encoding
 In many applications it's wise to let Perl use Unicode for the strings it
 processes. Most of the interfaces Perl has to the outside world are still byte
 based. Programs therefore need to decode byte strings that enter the program
 from the outside and encode them again on the way out.
 .
 The POSIX locale system is used to specify both the language conventions
 requested by the user and the preferred character set to consume and output.
 The Encode::Locale module looks up the charset and encoding (called a CODESET
 in the locale jargon) and arranges for the Encode module to know this encoding
 under the name "locale". It means bytes obtained from the environment can be
 converted to Unicode strings by calling Encode::encode(locale => $bytes) and
 converted back again with Encode::decode(locale => $string).
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Encode-Locale

Package: libepoxy0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1307
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libepoxy
Version: 1.5.10-1build1
Depends: libc6 (>= 2.34)
Description: OpenGL function pointer management library
 It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(),
 eglGetProcAddress(), etc. from the app developer, with very little
 knowledge needed on their part.  They get to read GL specs and write
 code using undecorated function names like glCompileShader().
Homepage: https://github.com/anholt/libepoxy
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 69
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.17029-2
Depends: perl:any
Description: Perl module for error/exception handling in an OO-ish way
 The Error module provides two interfaces.  Firstly "Error" provides a
 procedural interface to exception handling. Secondly "Error" is a base class
 for errors/exceptions that can either be thrown, for subsequent catch, or can
 simply be recorded.
 .
 Errors in the class "Error" should not be thrown directly, but the user
 should throw errors from a sub-class of "Error".
 .
 Warning: Using the "Error" module is no longer recommended due to the
 black-magical nature of its syntactic sugar, which often tends to break. Its
 maintainers have stopped actively writing code that uses it, and discourage
 people from doing so.
 .
 Recommended alternatives are Exception::Class (libexception-class-perl),
 Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
 (libtry-tiny-perl).
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Error

Package: libestr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 33
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libestr
Version: 0.1.11-1build1
Depends: libc6 (>= 2.14)
Description: Helper functions for handling strings (lib)
 The 'libestr' library contains some essential string manipulation
 functions and more, like escaping special characters.
 .
 This package contains the shared library.
Homepage: https://libestr.adiscon.com/
Original-Maintainer: Florian Ernst <[email protected]>

Package: libevdev2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libevdev
Version: 1.13.1+dfsg-1build1
Depends: libc6 (>= 2.33)
Description: wrapper library for evdev devices
 libevdev is a wrapper library for evdev devices. It provides
 functions covering the common tasks when dealing with evdev devices,
 thus avoiding erroneous ioctls and other errors.
 .
 This package contains the files required to run software using
 libevdev.
Homepage: https://www.freedesktop.org/wiki/Software/libevdev/
Original-Maintainer: Stephen Kitt <[email protected]>

Package: libevent-2.1-7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 379
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-9ubuntu2
Replaces: libevent-2.1-7
Provides: libevent-2.1-7 (= 2.1.12-stable-9ubuntu2)
Depends: libc6 (>= 2.38)
Breaks: libevent-2.1-7 (<< 2.1.12-stable-9ubuntu2)
Description: Asynchronous event notification library
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 For backward compatibility and to transition to "libevent_core only"
 or "libevent_core + libevent_extra", the libevent source package builds
 the libevent library that includes everything in libevent_core and
 libevent_extra.
Homepage: https://libevent.org/
Original-Maintainer: Nicolas Mora <[email protected]>

Package: libevent-core-2.1-7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-9ubuntu2
Replaces: libevent-core-2.1-7
Provides: libevent-core-2.1-7 (= 2.1.12-stable-9ubuntu2)
Depends: libc6 (>= 2.38)
Breaks: libevent-core-2.1-7 (<< 2.1.12-stable-9ubuntu2)
Description: Asynchronous event notification library (core)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 The libevent_core library includes event loops, timers, buffer code,
 and various small compatibility functions.
 .
 If you're writing software that only uses libevent's event loop, you
 should link against only the libevent_core library.
Homepage: https://libevent.org/
Original-Maintainer: Nicolas Mora <[email protected]>

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 388
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.6.1-2ubuntu0.4
Depends: libc6 (>= 2.38)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libexpat1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 833
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.6.1-2ubuntu0.4
Provides: libexpat-dev
Depends: libexpat1 (= 2.6.1-2ubuntu0.4), libc6-dev | libc-dev
Conflicts: libexpat-dev
Description: XML parsing C library - development kit
 This package contains the header file and development libraries of
 expat, the C library for parsing XML.  Expat is a stream oriented XML
 parser.  This means that you register handlers with the parser prior
 to starting the parse.  These handlers are called when the parser
 discovers the associated structures in the document being parsed.  A
 start tag is an example of the kind of structures for which you may
 register handlers.
Homepage: https://libexpat.github.io/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libext2fs2t64
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 538
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.47.0-2.4~exp1ubuntu4.1
Replaces: e2fslibs (<< 1.43.9-1~), libext2fs2
Provides: e2fslibs (= 1.47.0-2.4~exp1ubuntu4.1), libext2fs2 (= 1.47.0-2.4~exp1ubuntu4.1)
Depends: libc6 (>= 2.38)
Breaks: e2fslibs (<< 1.43.9-1~), libext2fs2 (<< 1.47.0-2.4~exp1ubuntu4.1)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: libfakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 152
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: fakeroot
Version: 1.33-1
Replaces: fakeroot (<< 1.20-2~)
Depends: libc6 (>= 2.38)
Breaks: fakeroot (<< 1.20-2~)
Conffiles:
 /etc/ld.so.conf.d/fakeroot-x86_64-linux-gnu.conf f9f2331782e9078d5472c77e1d9cd869
Description: tool for simulating superuser privileges - shared libraries
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains the LD_PRELOAD libraries.
Original-Maintainer: Clint Adams <[email protected]>

Package: libfastjson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libfastjson
Version: 1.2304.0-1build1
Depends: libc6 (>= 2.38)
Description: fast json library for C
 The libfastjson library is a fork from json-c with a focus on performance.
 .
 This package contains the shared library.
Homepage: https://github.com/rsyslog/libfastjson
Original-Maintainer: Michael Biebl <[email protected]>

Package: libfcgi-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 34
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: libfcgi
Version: 2.4.2-2.1ubuntu0.24.04.1
Replaces: libfcgi0t64 (<< 2.4.0-8.4)
Depends: libc6 (>= 2.34), libfcgi0t64 (>= 2.4.2)
Breaks: libfcgi0t64 (<< 2.4.0-8.4)
Description: FastCGI bridge from CGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the cgi-fcgi utility to bridge between CGI
 and FastCGI.
Homepage: https://github.com/FastCGI-Archives
Original-Maintainer: Boris Pek <[email protected]>

Package: libfcgi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 69
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 0.82+ds-3build2
Depends: perl (>= 5.38.2-3.2build2), perlapi-5.38.2, libc6 (>= 2.4), libfcgi0t64 (>= 2.4.2)
Description: helper module for FastCGI
 FCGI is a simple Perl module for writing FastCGI applications. FastCGI is a
 language-independent, scalable, open extension to CGI that provides faster
 performance by keeping programs persistent in memory and allowing them to
 handle multiple requests. This module provides the core interface needed to
 write these applications.
 .
 For complex applications, you should consider a more full-featured solution
 such as Plack or Catalyst (see libcatalyst-perl).
Homepage: https://metacpan.org/release/FCGI
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libfcgi0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libfcgi
Version: 2.4.2-2.1ubuntu0.24.04.1
Replaces: libfcgi0, libfcgi0c2, libfcgi0ldbl
Provides: libfcgi, libfcgi0ldbl (= 2.4.2-2.1ubuntu0.24.04.1)
Depends: libc6 (>= 2.15), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
Recommends: libfcgi-bin (= 2.4.2-2.1ubuntu0.24.04.1)
Breaks: libfcgi0ldbl (<< 2.4.2-2.1ubuntu0.24.04.1)
Conflicts: libfcgi0, libfcgi0c2
Description: shared library of FastCGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the shared libraries.
Homepage: https://github.com/FastCGI-Archives
Original-Maintainer: Boris Pek <[email protected]>

Package: libfdisk1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 406
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.38), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libffi-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 323
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.6-1build1
Depends: libffi8 (= 3.4.6-1build1)
Conflicts: libffi4-dev
Description: Foreign Function Interface library (development files)
 This package contains the headers and static library files necessary for
 building programs which use libffi.
 .
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Homepage: https://sourceware.org/libffi/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libffi8
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.6-1build1
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.6-1build1)
Depends: libc6 (>= 2.34)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Homepage: https://sourceware.org/libffi/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libfftw3-double3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2282
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.10-1ubuntu3
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Double precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for double precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org
Original-Maintainer: Debian Science Maintainers <[email protected]>

Package: libfido2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 242
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libfido2
Version: 1.14.0-1build3
Depends: libc6 (>= 2.38), libcbor0.10 (>= 0.10.2), libssl3t64 (>= 3.0.0), libudev1 (>= 183), zlib1g (>= 1:1.1.4)
Description: library for generating and verifying FIDO 2.0 objects
 A library for communicating with a FIDO device over USB or NFC, and for
 verifying attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO
 2.0 (CTAP 2) are supported.
 .
 This package contains the library.
Homepage: https://developers.yubico.com/libfido2/
Original-Maintainer: Debian Authentication Maintainers <[email protected]>

Package: libfile-fcntllock-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 126
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 0.22-4ubuntu5
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.28)
Suggests: gcc | c-compiler
Description: Perl module for file locking with fcntl(2)
 File::FcntlLock is a Perl module to do file locking in an object oriented
 fashion using the fcntl(2) system call. This allows locks on parts of a file
 as well as on the whole file and overcomes some known problems with flock(2),
 on which Perl's flock() function is based.
 .
 Furthermore due to its design it supports reliable locking over NFS.
Homepage: https://metacpan.org/release/File-FcntlLock
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libfile-listing-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.16-1
Depends: perl:any, libhttp-date-perl
Description: module to parse directory listings
 File::Listing exports a single function called parse_dir(), which can be used
 to parse directory listings.
 .
 The first parameter to parse_dir() is the directory listing to parse. It can
 be a scalar, a reference to an array of directory lines or a glob
 representing a filehandle to read the directory listing from.
 .
 The second parameter is the time zone to use when parsing time stamps in the
 listing. If this value is undefined, then the local time zone is assumed.
 .
 The third parameter is the type of listing to assume. Currently supported
 formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/File-Listing

Package: libflac12t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 440
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: flac
Version: 1.4.3+ds-2.1ubuntu2
Replaces: libflac12
Provides: libflac12 (= 1.4.3+ds-2.1ubuntu2)
Depends: libc6 (>= 2.33), libogg0 (>= 1.0rc3)
Breaks: libflac12 (<< 1.4.3+ds-2.1ubuntu2)
Description: Free Lossless Audio Codec - runtime C library
 FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is
 similar to MP3, but lossless.  The FLAC project consists of:
 .
  * The stream format
  * libFLAC, which implements a reference encoder, stream decoder, and file
    decoder
  * flac, which is a command-line wrapper around libFLAC to encode and decode
    .flac files
  * Input plugins for various music players (Winamp, XMMS, and more in the
    works)
 .
 This package contains the runtime library libFLAC.
Homepage: https://xiph.org/flac/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libflite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27522
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: flite
Version: 2.2-6build3
Depends: libasound2t64 (>= 1.0.16), libc6 (>= 2.38)
Description: Small run-time speech synthesis engine - shared libraries
 Flite is a small fast run-time speech synthesis engine.  It is the
 latest addition to the suite of free software synthesis tools
 including University of Edinburgh's Festival Speech Synthesis System
 and Carnegie Mellon University's FestVox project, tools, scripts and
 documentation for building synthetic voices.  However, flite itself
 does not require either of these systems to run.
 .
 It currently only supports the English and Indic languages.
 .
 This package contains the shared library objects of Festival Lite
Homepage: http://cmuflite.org
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libfont-afm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 68
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.20-4
Depends: perl:any
Description: Perl interface to Adobe Font Metrics files
 This module implements the Font::AFM class. Objects of this class are
 initialised from an AFM-file and allow you to obtain information
 about the font and the metrics of the various glyphs in the font.
 .
 All measurements in AFM files are given in terms of units equal to
 1/1000 of the scale factor of the font being used. To compute actual
 sizes in a document, these amounts should be multiplied by (scale
 factor of font)/1000.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Font-AFM

Package: libfontconfig-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 598
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.15.0-1.1ubuntu2
Replaces: libfontconfig1-dev (<< 2.13.1-3)
Provides: libfontconfig1-dev (= 2.15.0-1.1ubuntu2)
Depends: libfontconfig1 (= 2.15.0-1.1ubuntu2), libexpat1-dev, libfreetype-dev (>= 2.8.1), uuid-dev, pkgconf
Description: generic font configuration library - development
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the static libraries and headers needed for the
 development of applications using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <[email protected]>

Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 345
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.15.0-1.1ubuntu2
Provides: libfontconfig
Depends: libc6 (>= 2.38), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), fontconfig-config (>= 2.15.0-1.1ubuntu2)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/
Original-Maintainer: Debian freedesktop.org maintainers <[email protected]>

Package: libfontenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libfontenc
Version: 1:1.1.8-1build1
Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4)
Description: X11 font encoding library
 libfontenc is a library which helps font libraries portably determine
 and deal with different encodings of fonts.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libfontenc
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libfreetype-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2066
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.13.2+dfsg-1ubuntu0.1
Replaces: libfreetype6-dev (<< 2.10.1)
Provides: libfreetype6-dev (= 2.13.2+dfsg-1ubuntu0.1)
Depends: libfreetype6 (= 2.13.2+dfsg-1ubuntu0.1), libbrotli-dev, libbz2-dev, libc6-dev | libc-dev, libpng-dev, zlib1g-dev | libz-dev
Suggests: freetype2-doc (= 2.13.2+dfsg-1ubuntu0.1)
Breaks: libfreetype6-dev (<< 2.10.1)
Description: FreeType 2 font engine, development files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 This package contains all of the supplementary files you need to develop your
 own programs using the FreeType 2 library.
Homepage: https://freetype.org
Original-Maintainer: Hugh McMaster <[email protected]>

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 875
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.13.2+dfsg-1ubuntu0.1
Depends: libbrotli1 (>= 0.6.0), libbz2-1.0, libc6 (>= 2.33), libpng16-16t64 (>= 1.6.2), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
Homepage: https://freetype.org
Original-Maintainer: Hugh McMaster <[email protected]>

Package: libfribidi0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 1.0.13-3build1
Depends: libc6 (>= 2.4)
Description: Free Implementation of the Unicode BiDi algorithm
 FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
 languages.
 This package contains the shared libraries.
Homepage: http://www.fribidi.org/
Original-Maintainer: Debian Hebrew Packaging Team <[email protected]>

Package: libfuse3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.14.0-5build1
Depends: libc6 (>= 2.38)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libgav1-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 949
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libgav1
Version: 0.18.0-1build3
Depends: libabsl20220623t64 (>= 0~20220623.0-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 12)
Description: AV1 decoder developed by Google -- runtime library
 This package contains the runtime, shared library of gav1. Gav1 is
 a new decoder implementation for AV1 video encoding format (supporting
 profiles 0 and 1).
Homepage: https://chromium.googlesource.com/codecs/libgav1/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libgbm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.125-1), libexpat1 (>= 2.0.1), mesa-libgallium (= 25.2.8-0ubuntu0.24.04.1)
Description: generic buffer management API -- runtime
 This package contains the GBM buffer management library.  It provides a
 mechanism for allocating buffers for graphics rendering tied to Mesa.
 .
 GBM is intended to be used as a native platform for EGL on drm or openwfd.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libgcc-13-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 16082
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Replaces: libtsan2 (<< 12-20211113-2~)
Depends: gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), libgcc-s1 (>= 13.3.0-6ubuntu2~24.04.1), libgomp1 (>= 13.3.0-6ubuntu2~24.04.1), libitm1 (>= 13.3.0-6ubuntu2~24.04.1), libatomic1 (>= 13.3.0-6ubuntu2~24.04.1), libasan8 (>= 13.3.0-6ubuntu2~24.04.1), liblsan0 (>= 13.3.0-6ubuntu2~24.04.1), libtsan2 (>= 13.3.0-6ubuntu2~24.04.1), libubsan1 (>= 13.3.0-6ubuntu2~24.04.1), libhwasan0 (>= 13.3.0-6ubuntu2~24.04.1), libquadmath0 (>= 13.3.0-6ubuntu2~24.04.1)
Recommends: libc6-dev (>= 2.13-0ubuntu6)
Breaks: libtsan2 (<< 12-20211113-2~)
Description: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libgcc-s1
Protected: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Replaces: libgcc1 (<< 1:10)
Provides: libgcc1 (= 1:14.2.0-4ubuntu2~24.04.1)
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.35)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Important: yes
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libgcrypt20
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1396
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 1.10.3-2ubuntu0.1
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.27)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
 SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: https://gnupg.org/software/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <[email protected]>

Package: libgd-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 811
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.3.3-9ubuntu5
Depends: libfontconfig-dev, libfreetype6-dev, libgd3 (= 2.3.3-9ubuntu5), libheif-dev (>= 1.17.6-1ubuntu4~) | base-files (<< 11.1~), libjpeg-dev, libpng-dev, libtiff-dev, libvpx-dev, libwebp-dev, libx11-dev, libxpm-dev, libz-dev
Description: GD Graphics Library (development version)
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the full development version of the library.
Homepage: http://www.libgd.org/
Original-Maintainer: GD Team <[email protected]>

Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 437
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.3.3-9ubuntu5
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libheif1 (>= 1.17.6-1ubuntu4~), libjpeg8 (>= 8c), libpng16-16t64 (>= 1.6.2), libtiff6 (>= 4.0.3), libwebp7 (>= 1.3.2), libxpm4
Suggests: libgd-tools
Description: GD Graphics Library
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the runtime package of the library.
Homepage: http://www.libgd.org/
Original-Maintainer: GD Team <[email protected]>

Package: libgdbm-compat4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-5.1build1
Replaces: libgdbm-compat4
Provides: libgdbm-compat4 (= 1.23-5.1build1)
Depends: libc6 (>= 2.33), libgdbm6t64 (>= 1.16)
Breaks: libgdbm-compat4 (<< 1.23-5.1build1)
Description: GNU dbm database routines (legacy support runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
 This package includes library files, required to run old programs,
 that use legacy 'dbm' interface. For new programs, please use modern
 interface, provided by libgdbm6t64 and libgdbm-dev.
Homepage: https://gnu.org/software/gdbm
Original-Maintainer: Nicolas Mora <[email protected]>

Package: libgdbm6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 93
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-5.1build1
Replaces: libgdbm6
Provides: libgdbm6 (= 1.23-5.1build1)
Depends: libc6 (>= 2.34)
Suggests: gdbm-l10n (= 1.23-5.1build1)
Breaks: libgdbm6 (<< 1.23-5.1build1)
Description: GNU dbm database routines (runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: https://gnu.org/software/gdbm
Original-Maintainer: Nicolas Mora <[email protected]>

Package: libgdk-pixbuf-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 490
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.42.10+dfsg-3ubuntu3.3
Depends: libgdk-pixbuf2.0-common (>= 2.42.10+dfsg-3ubuntu3.3), shared-mime-info, libc6 (>= 2.34), libglib2.0-0t64 (>= 2.79.0), libjpeg8 (>= 8c), libpng16-16t64 (>= 1.6.2), libtiff6 (>= 4.0.3)
Recommends: libgdk-pixbuf2.0-bin
Description: GDK Pixbuf library
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgdk-pixbuf2.0-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.10+dfsg-3ubuntu3.3
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.35.4), libglib2.0-0t64 (>= 2.16.0)
Description: GDK Pixbuf library (thumbnailer)
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
 .
 This package contains the GDK pixdata compression utility, the thumbnailer
 and a utility for converting images into C code.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgdk-pixbuf2.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.10+dfsg-3ubuntu3.3
Description: GDK Pixbuf library - data files
 This package contains the common files and translations for the GDK
 Pixbuf library.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgfortran5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3256
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.38), libgcc-s1 (>= 4.3)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: Runtime library for GNU Fortran applications
 Library needed for GNU Fortran applications linked against the
 shared library.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libgif7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: giflib
Version: 5.2.2-1ubuntu1
Depends: libc6 (>= 2.14)
Description: library for GIF images (library)
 GIFLIB is a package of portable tools and library routines for working with
 GIF images.
 .
 This package contains the library.
Homepage: https://giflib.sourceforge.net/
Original-Maintainer: David Suárez <[email protected]>

Package: libgirepository-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 226
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.80.1-1
Provides: libgirepository-1.0-1-with-libffi8 (= 1.80.1-1)
Depends: libc6 (>= 2.29), libffi8 (>= 3.4), libglib2.0-0t64 (>= 2.80.0)
Breaks: libcjs0 (<< 4.8.2-1+b1), libgjs0g (<< 1.68.4-1+b1), libglib-object-introspection-perl (<< 0.049-1+b2), python-gi (<< 3.42.0-1+b1), python3-gi (<< 3.42.0-1+b1), ruby-gobject-introspection (<< 3.4.3-1+b2)
Description: Library for handling GObject introspection data (runtime library)
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains a C library for handling the introspection data.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: libgirepository-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 265
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Depends: libc6 (>= 2.38), libffi8 (>= 3.4), libglib2.0-0t64 (= 2.80.0-6ubuntu3.8)
Description: GLib runtime library for handling GObject introspection data
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared library used by language bindings such
 as PyGObject and gjs to call GObject methods.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 656
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.7.0-1build1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.7.0-1build1), libglx0 (= 1.7.0-1build1)
Description: Vendor neutral GL dispatch library -- legacy GL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for old libGL for compatibility reasons.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libgl1-mesa-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 285
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Depends: libgbm1 (= 25.2.8-0ubuntu0.24.04.1), libvulkan1, libc6 (>= 2.34)
Description: free implementation of the OpenGL API -- DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa, please look at the
 libglx-mesa0 package.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libglib2.0-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4194
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Replaces: libglib2.0-0 (<< 2.80.0-6ubuntu3~)
Provides: libgio-2.0-0 (= 2.80.0-6ubuntu3.8), libglib-2.0-0 (= 2.80.0-6ubuntu3.8), libglib2.0-0 (= 2.80.0-6ubuntu3.8), libgmodule-2.0-0 (= 2.80.0-6ubuntu3.8), libgobject-2.0-0 (= 2.80.0-6ubuntu3.8), libgthread-2.0-0 (= 2.80.0-6ubuntu3.8)
Depends: libc6 (>= 2.38), libffi8 (>= 3.4), libmount1 (>= 2.26.2), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Suggests: low-memory-monitor
Breaks: glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), gnome-shell (<< 46.0-0ubuntu5.1~), libedataserver-1.2-26 (<< 3.44.3-2~), libgladeui-2-6 (<< 3.22.2), libglib2.0-0 (<< 2.80.0-6ubuntu3~), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libglib2.0-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 362
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Depends: libglib2.0-data, libc6 (>= 2.38), libelf1t64 (>= 0.142), libglib2.0-0t64 (= 2.80.0-6ubuntu3.8)
Description: Programs for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the program files which is used for the libraries
 and others.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libglib2.0-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Description: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libglib2.0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 10776
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Replaces: libglib2.0-0-dbg (<< 2.51.4-1~)
Depends: libffi-dev, libglib2.0-0t64 (= 2.80.0-6ubuntu3.8), libglib2.0-bin (= 2.80.0-6ubuntu3.8), libglib2.0-dev-bin (= 2.80.0-6ubuntu3.8), libglib2.0-dev-bin-linux (= 2.80.0-6ubuntu3.8), libmount-dev, libpcre2-dev, libselinux1-dev, pkgconf, python3 | qemu-user | qemu-user-static, zlib1g-dev, python3:any, libc6 (>= 2.38), libffi8 (>= 3.4), libgirepository-2.0-0 (= 2.80.0-6ubuntu3.8)
Suggests: gir1.2-glib-2.0-dev, libglib2.0-doc
Breaks: libglib2.0-0-dbg (<< 2.51.4-1~)
Description: Development files for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed to compile programs against libglib2.0-0t64,
 as only it includes the header files and static libraries (optionally)
 needed for compiling.
 .
 GObject-Introspection metadata for this library can be found in the
 libgirepository1.0-dev package.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libglib2.0-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 716
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: glib2.0
Version: 2.80.0-6ubuntu3.8
Provides: libglib2.0-dev-bin-linux (= 2.80.0-6ubuntu3.8)
Depends: python3-packaging, python3:any, libc6 (>= 2.38), libglib2.0-0t64 (= 2.80.0-6ubuntu3.8)
Suggests: libgdk-pixbuf2.0-bin, libxml2-utils
Description: Development utilities for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed to compile programs against libglib2.0-0. It contains
 development utilities typically run during compilation and should not be
 installed directly. Use libglib2.0-dev instead.
Homepage: https://wiki.gnome.org/Projects/GLib
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libglut3.12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 352
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: freeglut
Version: 3.4.0-1build1
Depends: libc6 (>= 2.15), libgl1, libx11-6 (>= 2:1.2.99.901), libxi6 (>= 2:1.2.99.4), libxxf86vm1
Description: OpenGL Utility Toolkit
 GLUT is a window system independent toolkit for writing OpenGL programs,
 implementing a simple windowing API, which makes learning about and
 exploring OpenGL programming very easy.
 .
 GLUT is designed for constructing small to medium sized OpenGL programs,
 however it is not a full-featured toolkit, so large applications requiring
 sophisticated user interfaces are better off using native window system
 toolkits like GTK+ or Motif.
Homepage: https://freeglut.sourceforge.net/
Original-Maintainer: Anton Gladky <[email protected]>

Package: libglvnd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 728
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.7.0-1build1
Replaces: libgldispatch0-nvidia
Depends: libc6 (>= 2.38)
Breaks: libgldispatch0-nvidia
Description: Vendor neutral GL dispatch library
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains the GL dispatch library.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libglx-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 351
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Provides: libglx-vendor
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.125-1), libexpat1 (>= 2.0.1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.8.7), libxcb-dri3-0, libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxxf86vm1, mesa-libgallium (= 25.2.8-0ubuntu0.24.04.1), libgl1-mesa-dri
Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2)
Description: free implementation of the OpenGL API -- GLX vendor library
 Mesa is a 3-D graphics library with an API which is very similar to
 that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
 syntax or state machine, it is being used with authorization from
 Silicon Graphics, Inc.  However, the authors make no claim that Mesa
 is in any way a compatible replacement for OpenGL or associated with
 Silicon Graphics, Inc.
 .
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the modules themselves: these can be found
 in the libgl1-mesa-dri package.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libglx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 158
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.7.0-1build1
Depends: libc6 (>= 2.38), libglvnd0 (= 1.7.0-1build1), libx11-6 (>= 2:1.4.99.1), libglx-mesa0
Description: Vendor neutral GL dispatch library -- GLX support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for GLX.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libgme0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 317
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: game-music-emu
Version: 0.6.3-7build1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Description: Playback library for video game music files - shared library
 game-music-emu is a collection of video game music file emulators that
 support the following formats and systems:
  * AY        ZX Spectrum/Amstrad CPC
  * GBS       Nintendo Game Boy
  * GYM       Sega Genesis/Mega Drive
  * HES       NEC TurboGrafx-16/PC Engine
  * KSS       MSX Home Computer/other Z80 systems (doesn't support FM sound)
  * NSF/NSFE  Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound)
  * SAP       Atari systems using POKEY sound chip
  * SPC       Super Nintendo/Super Famicom
  * VGM/VGZ   Sega Master System/Mark III, Sega Genesis/Mega Drive, BBC Micro
 .
 This package contains the shared libraries necessary to run programs
 using libgme.
Homepage: https://github.com/libgme/game-music-emu
Original-Maintainer: Ileana Dumitrescu <[email protected]>

Package: libgmp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1594
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.3.0+dfsg-2ubuntu6.1
Replaces: libgmp10-dev, libgmp3-dev
Provides: libgmp10-dev
Depends: libgmp10 (= 2:6.3.0+dfsg-2ubuntu6.1), libgmpxx4ldbl (= 2:6.3.0+dfsg-2ubuntu6.1)
Suggests: gmp-doc, libgmp10-doc, libmpfr-dev
Conflicts: libgmp10-dev
Description: Multiprecision arithmetic library developers tools
 This development package provides the header files and the symbolic
 links to allow compilation and linking of programs that use the libraries
 provided in the libgmp10 package.
 .
 Both C and C++ bindings are present in this package.  Package
 libstdc++-dev is required to use the C++ bindings.
 .
 The MPFR library (multiple-precision floating-point) used to be
 included, but has since been moved to package libmpfr-dev.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Maintainers <[email protected]>

Package: libgmp10
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 543
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.3.0+dfsg-2ubuntu6.1
Depends: libc6 (>= 2.38)
Breaks: postgresql-pgmp (<< 1.0.3-1)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Maintainers <[email protected]>

Package: libgmp3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 14
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.3.0+dfsg-2ubuntu6.1
Replaces: libgmp10-dev
Depends: libgmp-dev (= 2:6.3.0+dfsg-2ubuntu6.1)
Conflicts: libgmp10-dev (<< 2:5.0.1+dfsg-7)
Description: Multiprecision arithmetic library developers tools
 This is a dummy package that simply pulls in libgmp-dev.
 It can safely be removed.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Maintainers <[email protected]>

Package: libgmpxx4ldbl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.3.0+dfsg-2ubuntu6.1
Replaces: libgmp3
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libgmp10 (>= 2:6.3.0+dfsg), libstdc++6 (>= 13.1)
Conflicts: libgmp3, libgmpxx4
Description: Multiprecision arithmetic library (C++ bindings)
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
Homepage: https://gmplib.org/
Original-Maintainer: Debian Science Maintainers <[email protected]>

Package: libgnutls30t64
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2360
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.8.3-1.1ubuntu3.6
Replaces: libgnutls30
Provides: libgnutls30 (= 3.8.3-1.1ubuntu3.6)
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64 (>= 3.6), libidn2-0 (>= 2.0.0), libnettle8t64 (>= 3.9~), libp11-kit0 (>= 0.25.1), libtasn1-6 (>= 4.14), libunistring5 (>= 1.1)
Suggests: gnutls-bin
Breaks: libgnutls30 (<< 3.8.3-1.1ubuntu3.6)
Conffiles:
 /etc/gnutls/config 35b37ffae94733dbef25088702ac3ba3
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the main runtime library.
Homepage: https://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <[email protected]>

Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 373
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.38)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libgpg-error-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: libgpg-error
Version: 1.47-3build2.1
Replaces: libgpg-error0 (<< 1.32-1.1~)
Breaks: libgpg-error0 (<< 1.32-1.1~)
Enhances: libgpg-error0
Description: library of error values and messages in GnuPG (localization files)
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
 .
 This package contains the translation files for the use in non-English locales.
Homepage: https://www.gnupg.org/related_software/libgpg-error/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: libgpg-error0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 185
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.47-3build2.1
Depends: libc6 (>= 2.38)
Recommends: libgpg-error-l10n
Description: GnuPG development runtime library
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: libgpm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gpm
Version: 1.20.7-11
Depends: libc6 (>= 2.38)
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Original-Maintainer: Axel Beckert <[email protected]>
Homepage: https://nico.schottelius.org/software/gpm/

Package: libgprofng0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 3833
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.42-4ubuntu2.10
Depends: libbinutils (= 2.42-4ubuntu2.10), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4)
Description: GNU Next Generation profiler (runtime library)
 Gprofng is the GNU Next Generation profiler for analyzing the performance
 of Linux applications.  Gprofng allows you to:
 .
  - Profile C / C++ / Java / Scala applications without needing to recompile
  - Profile multi-threaded applications
  - Analyze and compare multiple experiments
  - Use time-based sampling and / or hardware event counters
 .
 This package includes the libgprofng shared library.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.14-2build1
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.4)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.
Homepage: https://graphite.sil.org/
Original-Maintainer: Debian LibreOffice Maintainers <[email protected]>

Package: libgs-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 319
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 10.02.1~dfsg1-0ubuntu7.8
Replaces: libgs9-common (<< 10)
Breaks: libgs9-common (<< 10)
Description: interpreter for the PostScript language and for PDF - ICC profiles
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides common ICC profiles.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: libgs10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 24588
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ghostscript
Version: 10.02.1~dfsg1-0ubuntu7.8
Depends: libgs10-common (= 10.02.1~dfsg1-0ubuntu7.8), poppler-data, libc6 (>= 2.38), libcups2t64 (>= 2.3~b6), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libidn12 (>= 1.13), libijs-0.35 (>= 0.35), libjbig2dec0 (>= 0.16+20190905), libjpeg8 (>= 8c), libopenjp2-7 (>= 2.0.0), libpaper1, libpng16-16t64 (>= 1.6.2), libstdc++6 (>= 13.1), libtiff6 (>= 4.0.3), libx11-6, libxt6t64, zlib1g (>= 1:1.2.0)
Description: interpreter for the PostScript language and for PDF - Library
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides the Ghostscript library
 which makes the facilities of GPL Ghostscript available
 to applications.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: libgs10-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2245
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 10.02.1~dfsg1-0ubuntu7.8
Replaces: libgs-common (<< 10.0.0~dfsg-5)
Depends: fonts-urw-base35 (>= 20200910), libgs-common
Recommends: fonts-droid-fallback
Breaks: libgs-common (<< 10.0.0~dfsg-5)
Description: interpreter for the PostScript language and for PDF - common files
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides common architecture-independent files
 needed by the GPL Ghostscript library.
 .
 By default, GPL Ghostscript uses a font from the fonts-droid package
 to approximate glyphs in PDFs
 for which the requested CJK TrueType font is missing.
 If the fonts-droid package is not installed,
 these glyphs will be rendered as bullets.
Homepage: https://www.ghostscript.com/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: libgsm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libgsm
Version: 1.0.22-1build1
Depends: libc6 (>= 2.4)
Conflicts: libgsm-dev
Description: Shared libraries for GSM speech compressor
 This package contains runtime shared libraries for libgsm, an
 implementation of the European GSM 06.10 provisional standard for
 full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP
 (residual pulse excitation/long term prediction) coding at 13 kbit/s.
 .
 GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
 rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
 with typical UNIX applications, this implementation turns frames of
 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
 The quality of the algorithm is good enough for reliable speaker
 recognition; even music often survives transcoding in recognizable
 form (given the bandwidth limitations of 8 kHz sampling rate).
 .
 The interfaces offered are a front end modelled after compress(1), and
 a library API.  Compression and decompression run faster than realtime
 on most SPARCstations.  The implementation has been verified against the
 ETSI standard test patterns.
Homepage: http://www.quut.com/gsm/
Original-Maintainer: Debian Mobcom Maintainers <[email protected]>

Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 426
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: libkrb5-3 (= 1.20.1-6ubuntu2.6), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkrb5support0 (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc, krb5-user
Breaks: moonshot-gss-eap (<= 1.0)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libgssrpc4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Replaces: libgssrpc4
Provides: libgssrpc4 (= 1.20.1-6ubuntu2.6)
Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17)
Suggests: krb5-doc, krb5-user
Breaks: libgssrpc4 (<< 1.20.1-6ubuntu2.6)
Description: MIT Kerberos runtime libraries - GSS enabled ONCRPC
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an RPC library used by the Kerberos administrative
 programs and potentially other applications.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libgstreamer1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3500
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gstreamer1.0
Version: 1.24.2-1ubuntu0.1
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10), libdw1t64 (>= 0.126), libgcc-s1 (>= 4.2), libglib2.0-0t64 (>= 2.79.0), libunwind8, libcap2-bin
Suggests: gstreamer1.0-tools
Description: Core GStreamer libraries and elements
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the core library and elements.
Homepage: https://gstreamer.freedesktop.org
Original-Maintainer: Maintainers of GStreamer packages <[email protected]>

Package: libgtk-3-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9772
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gtk+3.0
Version: 3.24.41-4ubuntu1.3
Replaces: libgtk-3-0 (<< 3.24.41-1.1)
Provides: gtk3-binver-3.0.0, libgtk-3-0 (= 3.24.41-4ubuntu1.3)
Depends: adwaita-icon-theme, hicolor-icon-theme, shared-mime-info, libatk-bridge2.0-0t64 (>= 2.15.1), libatk1.0-0t64 (>= 2.35.1), libc6 (>= 2.38), libcairo-gobject2 (>= 1.14.0), libcairo2 (>= 1.14.0), libcolord2 (>= 0.1.10), libcups2t64 (>= 2.3~b6), libepoxy0 (>= 1.4.3), libfontconfig1 (>= 2.12.6), libfribidi0 (>= 0.19.7), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0t64 (>= 2.79.0), libharfbuzz0b (>= 2.2.0), libpango-1.0-0 (>= 1.45.5), libpangocairo-1.0-0 (>= 1.44.0), libpangoft2-1.0-0 (>= 1.44.0), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.14.91), libwayland-egl1 (>= 1.15.0), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.4.5), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6 (>= 2:1.2.99.4), libxinerama1 (>= 2:1.1.4), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.5.0), libgtk-3-common (>= 3.24.41-4ubuntu1.3)
Recommends: libgtk-3-bin, librsvg2-common
Suggests: gvfs
Breaks: libgtk-3-0 (<< 3.24.41-1.1)
Conffiles:
 /etc/gtk-3.0/settings.ini 17193df36387c79f30763b729b8a49a9
Description: GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the shared libraries.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgtk-3-bin
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 314
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.41-4ubuntu1.3
Replaces: gtk-3-examples (<< 3.24.13)
Depends: gtk-update-icon-cache, libc6 (>= 2.38), libcairo2 (>= 1.14.0), libgdk-pixbuf-2.0-0 (>= 2.40.0), libglib2.0-0t64 (>= 2.79.0), libgtk-3-0t64 (>= 3.24.41-4ubuntu1.3), libgtk-3-common (>= 3.24.41-4ubuntu1.3)
Breaks: gtk-3-examples (<< 3.24.13)
Description: programs for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the utilities which are used by the libraries
 and other packages.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgtk-3-common
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 4324
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: gtk+3.0
Version: 3.24.41-4ubuntu1.3
Replaces: libgtk-3-dev (<< 3.24.30-3~)
Depends: dconf-gsettings-backend | gsettings-backend
Recommends: libgtk-3-0t64
Breaks: libgtk-3-dev (<< 3.24.30-3~)
Conffiles:
 /etc/gtk-3.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf
Description: common files for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the common files which the libraries need.
Homepage: https://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libgudev-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libgudev (238-5ubuntu1)
Version: 1:238-5ubuntu1
Depends: libc6 (>= 2.33), libglib2.0-0t64 (>= 2.79.0), libudev1 (>= 251)
Description: GObject-based wrapper library for libudev
 This library makes it much simpler to use libudev from programs already using
 GObject. It also makes it possible to easily use libudev from other
 programming languages, such as Javascript, because of GObject introspection
 support.
Homepage: https://wiki.gnome.org/Projects/libgudev
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1140
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 8.3.0-2build2
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.38), libfreetype6 (>= 2.11.1), libglib2.0-0 (>= 2.32.0), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
 HarfBuzz is an implementation of the OpenType Layout engine (aka layout
 engine) and the script-specific logic (aka shaping engine).
 .
 This package contains the shared libraries.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz
Original-Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <[email protected]>

Package: libhashkit2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmemcached
Version: 1.1.4-1.1build3
Replaces: libhashkit2
Provides: libhashkit2 (= 1.1.4-1.1build3)
Depends: libc6 (>= 2.14), libssl3t64 (>= 3.0.0)
Breaks: libhashkit2 (<< 1.1.4-1.1build3)
Description: libmemcached hashing functions and algorithms
 libhashkit is a small and thread-safe client library that provides a
 collection of useful hashing algorithm. libhashkit is distributed with
 libmemcached.
 .
 This package provides the libhashkit shared library.
Homepage: https://awesomized.github.io/libmemcached/
Original-Maintainer: Ondřej Surý <[email protected]>

Package: libheif-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 225
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.17.6-1ubuntu4.3
Depends: libheif1 (= 1.17.6-1ubuntu4.3), libaom-dev, libdav1d-dev, libde265-dev (>= 1.0.7), libsharpyuv-dev, libx265-dev
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - development files
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 The development headers for compiling programs that use libheif are provided
 by this package.
Homepage: http://www.libheif.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libheif-plugin-aomdec
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.17.6-1ubuntu4.3
Depends: libheif1 (= 1.17.6-1ubuntu4.3), libaom3 (>= 3.2.0), libc6 (>= 2.14), libstdc++6 (>= 4.1.1)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - aomdec plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 This package contains the aomdec plugin
Homepage: http://www.libheif.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libheif-plugin-aomenc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.17.6-1ubuntu4.3
Depends: libheif1 (= 1.17.6-1ubuntu4.3), libaom3 (>= 3.2.0), libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - aomenc plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 This package contains the aomenc plugin
Homepage: http://www.libheif.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libheif-plugin-libde265
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.17.6-1ubuntu4.3
Depends: libheif1 (= 1.17.6-1ubuntu4.3), libc6 (>= 2.14), libde265-0 (>= 1.0.7), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - libde265 plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 This package contains the libde265 plugin
Homepage: http://www.libheif.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libheif1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 804
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.17.6-1ubuntu4.3
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libsharpyuv0 (>= 1.3.2), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4), libheif-plugin-aomdec (= 1.17.6-1ubuntu4.3) | libheif-plugin-dav1d (= 1.17.6-1ubuntu4.3)
Recommends: libheif-plugin-aomenc (= 1.17.6-1ubuntu4.3)
Suggests: libheif-plugin-libde265 (= 1.17.6-1ubuntu4.3), libheif-plugin-x265 (= 1.17.6-1ubuntu4.3), libheif-plugin-ffmpegdec (= 1.17.6-1ubuntu4.3), libheif-plugin-jpegdec (= 1.17.6-1ubuntu4.3), libheif-plugin-jpegenc (= 1.17.6-1ubuntu4.3), libheif-plugin-j2kdec (= 1.17.6-1ubuntu4.3), libheif-plugin-j2kenc (= 1.17.6-1ubuntu4.3), libheif-plugin-rav1e (= 1.17.6-1ubuntu4.3), libheif-plugin-svtenc (= 1.17.6-1ubuntu4.3)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - shared library
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 This package contains the shared library.
Homepage: http://www.libheif.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libhogweed6t64
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 337
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.9.1-2.2build1.1
Replaces: libhogweed6
Provides: libhogweed6 (= 3.9.1-2.2build1.1)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg), libnettle8t64
Breaks: libhogweed6 (<< 3.9.1-2.2build1.1)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Original-Maintainer: Magnus Holmgren <[email protected]>
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libhtml-form-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 91
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.11-1
Depends: perl:any, libhtml-parser-perl, libhttp-message-perl, liburi-perl
Description: module that represents an HTML form element
 Objects of the HTML::Form class represents a single HTML <form> ... </form>
 instance. A form consists of a sequence of inputs that usually have names,
 and which can take on various values. The state of a form can be tweaked and
 it can then be asked to provide HTTP::Request objects that can be passed to
 the request() method of LWP::UserAgent.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTML-Form

Package: libhtml-format-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 119
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2.16-2
Provides: libhtml-formatter-perl (= 2.16-2)
Depends: perl:any, libfont-afm-perl, libhtml-tree-perl
Description: module for transforming HTML into various formats
 HTML::Formatter is a base class for various formatters, which are modules
 that traverse an HTML syntax tree and produce various output file formats.
 There are currently three formatter classes included:
 .
  * HTML::FormatText for converting to plain human-readable text
  * HTML::FormatPS for converting to PostScript
  * HTML::FormatRTF for converting to Microsoft's Rich Text Format (RTF)
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTML-Formatter

Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 213
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 3.81-1build3
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.4), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
 HTML::Parser is a collection of modules useful for handling HTML documents.
 These modules used to be part of the libwww-perl distribution, but are now
 unbundled in order to facilitate a separate development track.
 .
 Objects of the HTML::Parser class will recognize markup and separate it from
 content data. As different kinds of markup are recognized, the corresponding
 event handler is invoked. The document to be parsed may also be supplied in
 arbitrary chunks, making on-the-fly parsing of network documents possible.
Homepage: https://metacpan.org/release/HTML-Parser
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 30
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.20-6
Depends: perl:any
Description: data tables pertaining to HTML
 HTML::Tagset contains data tables useful in dealing with HTML.  For instance,
 it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
 which cannot have content.  It provides no functions or methods.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTML-Tagset

Package: libhtml-template-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 181
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 2.97-2
Depends: perl:any, libcgi-pm-perl | perl (<< 5.19)
Suggests: libipc-sharedcache-perl
Description: module for using HTML templates with Perl
 HTML::Template attempts to make using HTML templates simple and
 natural. It extends standard HTML with the pseudo tags <TMPL_VAR>,
 <TMPL_LOOP>, <TMPL_INCLUDE>, <TMPL_IF> and <TMPL_ELSE>. These are used
 to implement some basic logic - variable substitution, loops,
 conditional branches - inside the HTML template, while leaving the more
 complex computations to separate Perl code. This keeps the template
 accessible for designers and other non-Perl people, without limiting
 the programmer.
 .
 HTML::Template optionally stores its cache in shared memory using the
 IPC::SharedCache module. Please install libipc-sharedcache-perl and
 pass the shared_cache option to HTML::Template if you want to make use
 of this.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTML-Template

Package: libhtml-tree-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 478
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 5.07-3
Depends: perl:any, libhtml-parser-perl, libhtml-tagset-perl
Recommends: libhtml-format-perl, libwww-perl
Description: Perl module to represent and create HTML syntax trees
 HTML::Tree is a collection of modules that represent, create and extract
 information from HTML syntax trees.  These modules used to be part of
 the libwww-perl distribution, but are now unbundled in order to
 facilitate a separate development track.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTML-Tree

Package: libhttp-cookies-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 49
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.11-1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl
Description: HTTP cookie jars
 This class is for objects that represent a "cookie jar" -- that is, a
 database of all the HTTP cookies that a given LWP::UserAgent object knows
 about.
 .
 Cookies are a general mechanism which server side connections can use to both
 store and retrieve information on the client side of the connection. For more
 information about cookies refer to
 <URL:http://curl.haxx.se/rfc/cookie_spec.html> and
 <URL:http://www.cookiecentral.com/>. HTTP::Cookies also implements the new
 style cookies described in RFC 2965. The two variants of cookies are supposed
 to be able to coexist happily.
 .
 Instances of the class HTTP::Cookies are able to store a collection of
 Set-Cookie2: and Set-Cookie: headers and are able to use this information to
 initialize Cookie-headers in HTTP::Request objects. The state of a
 HTTP::Cookies object can be saved in and restored from files.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTTP-Cookies

Package: libhttp-daemon-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 57
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.16-1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl, libio-socket-ip-perl, liblwp-mediatypes-perl, libsocket-perl
Description: simple http server class
 Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen on a
 socket for incoming requests. The HTTP::Daemon is a subclass of
 IO::Socket::IP, so you can perform socket operations directly on it too.
 .
 The accept() method will return when a connection from a client is available.
 The returned value will be an HTTP::Daemon::ClientConn object which is
 another IO::Socket::IP subclass. Calling the get_request() method on this
 object will read data from the client and return an HTTP::Request object. The
 ClientConn object also provide methods to send back various responses.
 .
 This HTTP daemon does not fork(2) for you. Your application, i.e. the user of
 the HTTP::Daemon is responsible for forking if that is desirable. Also note
 that the user is responsible for generating responses that conform to the
 HTTP/1.1 protocol.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTTP-Daemon

Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.06-1
Depends: perl:any, libtime-local-perl (>= 1.28), libtimedate-perl
Description: module of date conversion routines
 HTTP::Date provides functions that deal the date formats used by the HTTP
 protocol (and then some more). Only the first two functions, time2str() and
 str2time(), are exported by default.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTTP-Date

Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 196
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.45-1ubuntu1
Depends: perl:any, libclone-perl (>= 0.46), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libencode-locale-perl, libencode-perl, libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl
Suggests: libio-compress-brotli-perl
Description: perl interface to HTTP style messages
 The HTTP::Message distribution contains classes useful for representing the
 messages passed in HTTP style communication. These are classes representing
 requests, responses and the headers contained within them.
 .
 The HTTP::Headers class encapsulates HTTP-style message headers. The headers
 consist of attribute-value pairs also called fields, which may be repeated,
 and which are printed in a particular order. The field names are cases
 insensitive.
 .
 Instances of this class are usually created as member variables of the
 HTTP::Request and HTTP::Response classes, internal to the library.
Homepage: https://metacpan.org/release/HTTP-Message
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libhttp-negotiate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 34
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.01-2
Depends: perl:any, libhttp-message-perl
Description: implementation of content negotiation
 HTTP::Negotiate provides a complete implementation of the HTTP content
 negotiation algorithm. Content negotiation allows for the selection of a
 preferred content representation based upon attributes of the negotiable
 variants and the value of the various Accept* header fields in the request.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/HTTP-Negotiate

Package: libhwasan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4897
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (HWASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libhwy1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3343
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: highway
Version: 1.0.7-8.1build1
Replaces: libhwy1
Provides: libhwy1 (= 1.0.7-8.1build1)
Depends: libc6 (>= 2.25), libgcc-s1 (>= 12), libstdc++6 (>= 5)
Breaks: libhwy1 (<< 1.0.7-8.1build1)
Description: Efficient and performance-portable SIMD wrapper (runtime files)
 This library provides type-safe and source-code portable wrappers over
 existing platform-specific intrinsics. Its design aims for simplicity,
 reliable efficiency across platforms, and immediate usability with current
 compilers.
 .
 This package installs the highway runtime files.
Homepage: https://github.com/google/highway
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libhyperscan5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16129
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: hyperscan
Version: 5.4.2-2
Replaces: libhyperscan4 (>= 5)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), libstdc++6 (>= 11), sse3-support
Conflicts: libhyperscan4 (>= 5)
Description: High-performance regular expression matching library
 Hyperscan is a high-performance multiple regex matching library.
 It follows the regular expression syntax of the commonly-used libpcre library,
 but is a standalone library with its own C API. Hyperscan uses hybrid automata
 techniques to allow simultaneous matching of large numbers (up to tens of
 thousands) of regular expressions and for the matching of regular expressions
 across streams of data. Hyperscan is typically used in a DPI library stack.
 .
 libhyperscan only runs on processors with at least SSSE3 support.
Original-Maintainer: Robert Haist <[email protected]>
Homepage: https://github.com/intel/hyperscan

Package: libibverbs1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 193
Maintainer: Benjamin Drung <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: rdma-core
Version: 50.0-2ubuntu0.2
Depends: adduser, libc6 (>= 2.38), libnl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.2.7)
Recommends: ibverbs-providers
Breaks: ibverbs-providers (<< 34~)
Description: Library for direct userspace use of RDMA (InfiniBand/iWARP)
 libibverbs is a library that allows userspace processes to use RDMA
 "verbs" as described in the InfiniBand Architecture Specification and
 the RDMA Protocol Verbs Specification.  iWARP ethernet NICs support
 RDMA over hardware-offloaded TCP/IP, while InfiniBand is a
 high-throughput, low-latency networking technology.  InfiniBand host
 channel adapters (HCAs) and iWARP NICs commonly support direct
 hardware access from userspace (kernel bypass), and libibverbs
 supports this when available.
 .
 For this library to be useful, a device-specific plug-in module
 should also be installed.
 .
 This package contains the shared library.
Homepage: https://github.com/linux-rdma/rdma-core

Package: libice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.10-1build3
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.38), x11-common
Description: X11 Inter-Client Exchange library
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libicu-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 47851
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 74.2-1ubuntu3.1
Replaces: icu-devtools (<< 74.1~rc-1~)
Depends: libicu74 (= 74.2-1ubuntu3.1), icu-devtools (>= 74.2-1ubuntu3.1), libc6-dev | libc-dev
Suggests: icu-doc
Breaks: icu-devtools (<< 74.1~rc-1~)
Description: Development files for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the development
 files for ICU.
Homepage: https://icu.unicode.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libicu74
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35919
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 74.2-1ubuntu3.1
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: https://icu.unicode.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libidn12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 228
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.42-1build1
Depends: libc6 (>= 2.14)
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/
Original-Maintainer: Debian Libidn Team <[email protected]>

Package: libidn2-0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.3.7-2build1.1
Depends: libc6 (>= 2.14), libunistring5 (>= 1.1)
Description: Internationalized domain names (IDNA2008/TR46) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2
Original-Maintainer: Debian Libidn team <[email protected]>

Package: libiec61883-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libiec61883
Version: 1.2.0-6build1
Depends: libc6 (>= 2.4), libraw1394-11 (>= 2.1.2)
Description: partial implementation of IEC 61883 (shared lib)
 Implementation of IEC 61883, part 1 (CIP, plug registers, and CMP), part 2
 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of IIDC, nearly all
 FireWire multimedia devices use IEC 61883 protocols.
 .
 The libiec61883 library provides a higher level API for streaming DV,
 MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
 transmission. It uses the new "rawiso" API of libraw1394, which
 transparently provides mmap-ed DMA for efficient data transfer. It also
 represents the third generation of I/O technology for Linux 1394 for
 these media types thereby removing the complexities of additional kernel
 modules, /dev nodes, and procfs. It also consolidates features for plug
 control registers and connection management that previously existed in
 experimental form in an unreleased version of libavc1394.
Homepage: https://ieee1394.wiki.kernel.org/index.php/Main_Page
Original-Maintainer: Debian QA Group <[email protected]>

Package: libigdgmm12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 639
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: intel-gmmlib
Version: 22.3.17+ds1-1ubuntu1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
Description: Intel Graphics Memory Management Library -- shared library
 The Intel Graphics Memory Management Library provides device specific
 and buffer management for the Intel Graphics Compute Runtime for
 OpenCL and the Intel Media Driver for VAAPI.
 .
 This library is only useful for Broadwell and newer CPUs.
 .
 This package includes the shared library.
Homepage: https://github.com/intel/gmmlib
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libijs-0.35
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ijs
Version: 0.35-15.1build1
Depends: libc6 (>= 2.14)
Description: IJS raster image transport protocol: shared library
 IJS is, first and foremost, a protocol for transmission of raster page
 images. This snapshot provides a reference implementation of the protocol,
 the design of which is still in flux. When the protocol specification is
 published, it will be authoritative. Applications should feel free to link
 against the library provided in this package, adapt that code for their own
 needs, or roll a completely new implementation.
 .
 IJS is a client-server protocol, used to write ghostscript drivers. The
 drivers are separate programs. The client and server communicate via pipes,
 though shared memory may be used additionally in the future. Currently IJS
 is used by the hpijs and ijsgimpprint drivers.
 .
 Code for both the client- and server-side is included in the library. This
 package provides the shared library.
Homepage: http://www.linuxprinting.org/ijs/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: libimath-3-1-29t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 324
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: imath
Version: 3.1.9-3.1ubuntu2
Replaces: libimath-3-1-29
Provides: libimath-3-1-29 (= 3.1.9-3.1ubuntu2)
Depends: libc6 (>= 2.4), libstdc++6 (>= 13.1)
Breaks: libimath-3-1-29 (<< 3.1.9-3.1ubuntu2)
Description: Utility libraries from ASF used by OpenEXR - runtime
 Imath is a basic, light-weight, and efficient C++ representation of
 2D and 3D vectors and matrices and other simple but useful
 mathematical objects, functions, and data types common in computer
 graphics applications, including the “half” 16-bit floating-point type.
 .
 Imath also includes optional Python bindings for all types and
 functions, including optimized implementations of vector and
 matrix arrays.
 .
 This package provides the runtime libraries.
Homepage: https://www.openexr.com
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libimobiledevice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libimobiledevice
Version: 1.3.0-8.1build3
Replaces: libimobiledevice0, libimobiledevice1, libiphone0
Depends: libc6 (>= 2.34), libplist-2.0-4 (>= 2.3.0), libssl3t64 (>= 3.0.0), libusbmuxd6 (>= 2.0.2)
Recommends: usbmuxd
Suggests: libusbmuxd-tools
Conflicts: libiphone0
Description: Library for communicating with iPhone and other Apple devices
 libimobiledevice is a library that talks the native Apple USB protocols that
 the iPhone, iPad and iPod Touch use. Unlike other projects, libimobiledevice
 does not depend on using any existing libraries from Apple.
Homepage: https://www.libimobiledevice.org/
Original-Maintainer: gtkpod Maintainers <[email protected]>

Package: libinih1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libinih
Version: 55-1ubuntu2
Depends: libc6 (>= 2.4)
Description: simple .INI file parser
 inih (INI Not Invented Here) is a simple .INI file parser written in C.
 It's only a couple of pages of code, and it was designed to be small and
 simple, so it's good for embedded systems. It's also more or less
 compatible with Python's ConfigParser style of .INI files, including
 RFC 822-style multi-line syntax and name: value entries.
Homepage: https://github.com/benhoyt/inih
Original-Maintainer: Yangfl <[email protected]>

Package: libintl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 4290
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.33-1build3
Depends: perl:any
Recommends: libintl-xs-perl
Description: Uniforum message translations system compatible i18n library
 libintl-perl is an internationalization library for Perl that aims to be
 compatible with the Uniforum message translations system as implemented for
 example in GNU gettext.
Homepage: https://metacpan.org/release/libintl-perl
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libintl-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 54
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libintl-perl
Version: 1.33-1build3
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.3), libintl-perl (= 1.33-1build3)
Description: XS Uniforum message translations system compatible i18n library
 libintl-perl is an internationalization library for Perl that aims to be
 compatible with the Uniforum message translations system as implemented for
 example in GNU gettext.
 .
 This package contains the XS Implementation of Uniforum Message Translation,
 which is, thanks to the use of C code and libraries, a little bit faster than
 the pure Perl implementation.
Homepage: https://metacpan.org/release/libintl-perl
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.004-3
Depends: perl:any
Description: open an HTML file with automatic charset detection
 IO::HTML provides an easy way to open a file containing HTML while
 automatically determining its encoding.  It uses the HTML5 encoding
 sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/IO-HTML

Package: libio-socket-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 631
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 2.085-1
Depends: perl:any, libnet-ssleay-perl, netbase
Recommends: libio-socket-ip-perl | libio-socket-inet6-perl, libsocket-perl | libsocket6-perl, liburi-perl | libnet-libidn-perl | libnet-idn-encode-perl
Suggests: ca-certificates
Description: Perl module implementing object oriented interface to SSL sockets
 This module is a true drop-in replacement for IO::Socket::INET that
 uses SSL to encrypt data before it is transferred to a remote server
 or client.  IO::Socket::SSL supports all the extra features that one
 needs to write a full-featured SSL client or server application:
 multiple SSL contexts, cipher selection, certificate verification, and
 SSL version selection.  As an extra bonus, it works perfectly with
 mod_perl.
 .
 IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or
 libio-socket-inet6-perl is installed.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/IO-Socket-SSL

Package: libip4tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.10-3ubuntu2
Depends: libc6 (>= 2.4)
Description: netfilter libip4tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv4) C library from the
 Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libip6tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.10-3ubuntu2
Depends: libc6 (>= 2.4)
Description: netfilter libip6tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv6) C library from the
 Netfilter xtables framework.
 .
 iptables IPv6 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libipset13
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ipset
Version: 7.19-1ubuntu2
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Description: library for IP sets
 IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which can be
 administered by the ipset(8) utility. Depending on the type, currently an
 IP set may store IP addresses, (TCP/UDP) port numbers or IP addresses with
 MAC addresses in a  way which ensures lightning speed when matching an
 entry against a set.
 .
 If you want to
 .
  * store multiple IP addresses or port numbers and match against the
    entire collection using a single iptables rule.
  * dynamically update iptables rules against IP addresses or ports without
    performance penalty.
  * express complex IP address and ports based rulesets with a single
    iptables rule and benefit from the speed of IP sets.
 .
 then IP sets may be the proper tool for you.
 .
 This package contains the shared libraries needed to run programs that use
 the IP sets library.
Homepage: https://ipset.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libisl23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2032
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.26-3build1.1
Replaces: libisl-dbg (<< 0.19)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg)
Breaks: libisl-dbg (<< 0.19)
Description: manipulating sets and relations of integer points bounded by linear constraints
 isl is a library for manipulating sets and relations of integer points
 bounded by linear constraints. Supported operations on sets include
 intersection, union, set difference, emptiness check, convex hull,
 (integer) affine hull, integer projection, and computing the lexicographic
 minimum using parametric integer programming. It also includes an ILP solver
 based on generalized basis reduction.
 .
 This package contains the runtime library.
Homepage: http://isl.gforge.inria.fr/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libisns0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 495
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: open-isns
Version: 0.101-0.3build3
Replaces: libisns0
Provides: libisns0 (= 0.101-0.3build3)
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Recommends: netbase
Breaks: libisns0 (<< 0.101-0.3build3)
Description: Internet Storage Name Service - shared libraries
 Open-iSNS is an implementation of the Internet Storage Name Service
 (iSNS), according to RFC 4171, which facilitates automated discovery,
 management, and configuration of iSCSI and Fibre Channel devices on a
 TCP/IP network.
 .
 This package provides the libisns shared library for use in client
 applications.
Homepage: https://github.com/open-iscsi/open-isns
Original-Maintainer: Debian iSCSI Maintainers <[email protected]>

Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.34)
Description: GNU Transactional Memory Library
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libjack-jackd2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1131
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jackd2
Version: 1.9.21~dfsg-3ubuntu3
Replaces: libjack-0.116, libjack-0.125
Provides: libjack-0.116, libjack-0.125
Depends: libc6 (>= 2.38), libdb5.3t64, libgcc-s1 (>= 3.0), libopus0 (>= 1.3.1-2~), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1)
Suggests: jackd2 (= 1.9.21~dfsg-3ubuntu3)
Conflicts: libjack-0.116, libjack-0.125, libjack0
Description: JACK Audio Connection Kit (libraries)
 JACK is a low-latency sound server, allowing multiple applications to
 connect to one audio device, and to share audio between themselves.
 .
 This package contains the shared libraries.
Homepage: https://jackaudio.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libjansson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jansson
Version: 2.14-2build2
Depends: libc6 (>= 2.38)
Description: C library for encoding, decoding and manipulating JSON data
 Jansson is a C library for encoding, decoding and manipulating JSON data.
 .
 It features:
  * Simple and intuitive API and data model
  * Comprehensive documentation
  * No dependencies on other libraries
  * Full Unicode support (UTF-8)
  * Extensive test suite
Homepage: http://www.digip.org/jansson/
Original-Maintainer: Alessandro Ghedini <[email protected]>

Package: libjbig-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 90
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-6.1ubuntu2
Depends: libjbig0 (= 2.1-6.1ubuntu2)
Description: JBIGkit development files
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the headers for the library.
 .
 Please note: There is no statically linked library in this package, and what
 was previously two libraries with a single common file has been merged into
 one library (libjbig).
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <[email protected]>

Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-6.1ubuntu2
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/
Original-Maintainer: Michael van der Kolff <[email protected]>

Package: libjbig2dec0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 174
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jbig2dec
Version: 0.20-1build3
Depends: libc6 (>= 2.14)
Description: JBIG2 decoder library - shared libraries
 jbig2dec is a decoder library and example utility implementing the JBIG2
 bi-level image compression spec. Also known as ITU T.88 and ISO IEC
 14492, and included by reference in Adobe's PDF version 1.4 and later.
 .
 This package contains the shared library libjbig2dec.
Homepage: https://jbig2dec.com/
Original-Maintainer: Debian Printing Team <[email protected]>

Package: libjemalloc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 839
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jemalloc
Version: 5.3.0-2build1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4)
Description: general-purpose scalable concurrent malloc(3) implementation
 A library providing a malloc(3) implementation for multi-threaded processes on
 multi-processor systems.
 .
 Notable features are reduced lock contention, predictable low fragmentation,
 and introspection with heap profiling.
Homepage: https://jemalloc.net/
Original-Maintainer: Faidon Liambotis <[email protected]>

Package: libjpeg-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 9
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu11
Depends: libjpeg8-dev
Description: Independent JPEG Group's JPEG runtime library (dependency package)
 This package will always depend on the current default JPEG library
 development package version.

Package: libjpeg-turbo8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 587
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 2.1.5-2ubuntu2
Depends: libc6 (>= 2.14)
Description: libjpeg-turbo JPEG runtime library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the shared runtime library.
Homepage: https://www.libjpeg-turbo.org/
Original-Maintainer: Ondřej Surý <[email protected]>

Package: libjpeg-turbo8-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1105
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 2.1.5-2ubuntu2
Replaces: libjpeg62-dev, libjpeg7-dev, libjpeg9-dev
Provides: libjpeg-dev
Depends: libc-dev, libjpeg-turbo8 (= 2.1.5-2ubuntu2)
Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg9-dev
Description: Development files for the libjpeg-turbo JPEG library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the static library, headers and documentation.
Homepage: https://www.libjpeg-turbo.org/
Original-Maintainer: Ondřej Surý <[email protected]>

Package: libjpeg8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu11
Depends: libjpeg-turbo8 (>= 1.1.90+svn722-1ubuntu6)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
 libjpeg8 dependency package, depending on libjpeg-turbo8.

Package: libjpeg8-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 9
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libjpeg8-empty
Version: 8c-2ubuntu11
Depends: libjpeg-turbo8-dev (>= 1.1.90+svn722-1ubuntu6), libjpeg8 (= 8c-2ubuntu11)
Description: Independent JPEG Group's JPEG runtime library (dependency package)
 libjpeg8-dev dependency package, depending on libjpeg-turbo8-dev.

Package: libjq1
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 359
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jq
Version: 1.7.1-3ubuntu0.24.04.2
Depends: libc6 (>= 2.39), libonig5 (>= 6.8.1)
Description: lightweight and flexible command-line JSON processor - shared library
 jq is like sed for JSON data – you can use it to slice
 and filter and map and transform structured data with
 the same ease that sed, awk, grep and friends let you
 play with text.
 .
 It is written in portable C, and it has minimal runtime
 dependencies.
 .
 jq can mangle the data format that you have into the
 one that you want with very little effort, and the
 program to do so is often shorter and simpler than
 you’d expect.
 .
 This package contains the shared library.
Homepage: https://jqlang.github.io/jq
Original-Maintainer: ChangZhuo Chen (陳昌倬) <[email protected]>

Package: libjs-bootstrap4
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 4011
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: twitter-bootstrap4
Version: 4.6.1+dfsg1-4+deb12u1build0.24.04.1
Provides: node-bootstrap (= 4.6.1+dfsg1-4+deb12u1build0.24.04.1), sass-stylesheets-bootstrap
Depends: libjs-popper.js (>= 1.14.6+ds2-2)
Enhances: sass
Description: HTML, CSS and JS framework
 Bootstrap is a popular HTML, CSS, and JS framework
 for developing responsive, mobile first projects on the web.
 .
 It includes base CSS and HTML
 for typography, forms, buttons, tables, grids, navigation, and more.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://getbootstrap.com/

Package: libjs-jquery
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 705
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: node-jquery
Version: 3.6.1+dfsg+~3.5.14-1
Recommends: javascript-common
Description: JavaScript library for dynamic web applications
 jQuery is a fast, concise, JavaScript Library
 that simplifies how you traverse HTML documents, handle events,
 perform animations, and add Ajax interactions to your web pages.
 jQuery is designed to change the way that you write JavaScript.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://jquery.com/

Package: libjs-popper.js
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 611
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: popper.js
Version: 1.16.1+ds-6
Provides: node-popper.js (= 1.16.1), node-popper.js (= 1.16.1+ds-6), node-popperjs-babel-config (= 1.0.0), node-popperjs-bundle (= 1.0.2), node-popperjs-eslint-config-popper (= 1.0.0), node-popperjs-test (= 1.0.2), node-popperjs-test-utils (= 1.0.0)
Depends: javascript-common
Recommends: node-jquery
Description: Javascript library to position poppers in web applications
 A popper is an element on the screen which "pops out" from the natural flow
 of your application.
 Common examples of poppers are tooltips, popovers and drop-downs.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://popper.js.org/

Package: libjs-requirejs
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 1291
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: requirejs
Version: 2.3.6+ds+~2.1.34-2
Description: JavaScript file and module loader
 RequireJS loads plain JavaScript files as well as more defined
 modules. It is optimized for in-browser use, including in a Web
 Worker, but it can be used in other JavaScript environments, like
 Rhino and Node. It implements the Asynchronous Module API
 .
 RequireJS uses plain script tags to load modules/files, so it should
 allow for easy debugging. It can be used simply to load existing
 JavaScript files, so you can add it to your existing project without
 having to re-write your JavaScript files.
 .
 RequireJS includes an optimization tool you can run as part of your
 packaging steps for deploying your code. The optimization tool can
 combine and minify your JavaScript files to allow for better
 performance.
 .
 If the JavaScript file defines a JavaScript module via define(), then
 there are other benefits RequireJS can offer: improvements over
 traditional CommonJS modules and loading multiple versions of a
 module in a page. RequireJS also has a plugin system that supports
 features like i18n string bundles, and text file dependencies.
 .
 RequireJS does not have any dependencies on a JavaScript
 framework.
 .
 The standard require.js file is around 5.5KB when minified via
 Closure Compiler and gzipped.
 .
 RequireJS works in IE 6+, Firefox 2+, Safari 3.2+, Chrome 3+, and
 Opera 10+.
 .
 This package also provides a script r.js, that has two major functions:
  * Run AMD-based projects in Node and Rhino.
  * Includes the RequireJS Optimizer that combines scripts for optimal
   browser delivery.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://github.com/jrburke/r.js

Package: libjs-sizzle
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 128
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: sizzle
Version: 2.3.10+ds+~2.3.6-1
Provides: node-sizzle, node-types-sizzle
Breaks: node-typescript-types (<< 20201122~)
Description: Pure-JavaScript CSS selector engine
 Features:
  - completely standalone (no library dependencies)
  - competitive performance for most frequently used selectors
  - only 4KB minified and gzipped
  - highly extensible with easy-to-use API
  - designed for optimal performance with event delegation
  - clear IP assignment (all code held by the Dojo Foundation, contributors
    sign CLAs)
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://github.com/jquery/sizzle

Package: libjs-sphinxdoc
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 200
Maintainer: Debian Python Team <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: sphinx
Version: 7.2.6-6
Depends: libjs-jquery (>= 1.11.1), libjs-underscore (>= 1.3.1)
Description: JavaScript support for Sphinx documentation
 Sphinx is a tool for producing documentation for Python projects, using
 reStructuredText as markup language.
 .
 This package provides JavaScript code for documentation generated by Sphinx.
Homepage: https://www.sphinx-doc.org/

Package: libjs-underscore
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 349
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: underscore
Version: 1.13.4~dfsg+~1.11.4-3
Recommends: javascript-common, libjs-jquery
Description: JavaScript's functional programming helper library
 Underscore is a utility-belt library for JavaScript that provides a lot
 of the functional programming support that you would expect in
 Prototype.js (or Ruby), but without extending any of the built-in
 JavaScript objects.  It's the tie to go along with jQuery's tux.
 .
 Underscore provides 60-odd functions that support both the usual
 functional suspects: map, select, invoke - as well as more specialized
 helpers: function binding, javascript templating, deep equality
 testing, and so on.  It delegates to built-in functions, if present, so
 modern browsers will use the native implementations of forEach, map,
 reduce, filter, every, some and indexOf.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://underscorejs.org/

Package: libjson-c5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.17-1build1
Depends: libc6 (>= 2.38)
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki
Original-Maintainer: Nicolas Mora <[email protected]>

Package: libjxl0.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3596
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jpeg-xl
Version: 0.7.0-10.2ubuntu6.1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgcc-s1 (>= 3.4), libhwy1t64 (>= 0.16.0), liblcms2-2 (>= 2.13), libstdc++6 (>= 12)
Description: JPEG XL Image Coding System - "JXL" (shared libraries)
 The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and
 lossless image compression format. It has a rich feature set and is
 particularly optimized for responsive web environments, so that
 content renders well on a wide range of devices. Moreover, it includes
 several features that help transition from the legacy JPEG format.
 .
 This package installs shared libraries.
Homepage: https://github.com/libjxl/libjxl
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libjxr-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: jxrlib
Version: 1.2~git20170615.f752187-5.1ubuntu2
Depends: libc6 (>= 2.34), libjxr0t64 (>= 1.0)
Description: JPEG-XR lib - command line apps
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
 .
 Provides command line tools for JPEG XR libs (JxrDecApp & JxrEncApp)
Homepage: https://github.com/4creators/jxrlib
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libjxr0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 425
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: jxrlib
Version: 1.2~git20170615.f752187-5.1ubuntu2
Replaces: libjxr0
Provides: libjxr0 (= 1.2~git20170615.f752187-5.1ubuntu2)
Depends: libc6 (>= 2.29)
Breaks: libjxr0 (<< 1.2~git20170615.f752187-5.1ubuntu2)
Description: JPEG-XR lib - libraries
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
Homepage: https://github.com/4creators/jxrlib
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: libc6 (>= 2.38), libkrb5support0 (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libkadm5clnt-mit12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 172
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.17), libgssrpc4t64 (>= 1.6.dfsg.2), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.15~beta1), libkrb5support0 (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc, krb5-user
Conflicts: libkdb5-8
Description: MIT Kerberos runtime libraries - Administration Clients
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library used by clients of the Kerberos
 administration protocol.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libkadm5srv-mit12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libgssapi-krb5-2 (>= 1.6.dfsg.2), libgssrpc4t64 (>= 1.6.dfsg.2), libk5crypto3 (>= 1.6.dfsg.2), libkdb5-10t64 (>= 1.20.1), libkrb5-3 (>= 1.13~alpha1+dfsg), libkrb5support0 (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc, krb5-user
Conflicts: libkdb5-8
Description: MIT Kerberos runtime libraries - KDC and Admin Server
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library used by Kerberos administrative
 servers.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libkdb5-10t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Replaces: libkdb5-10
Provides: libkdb5-10 (= 1.20.1-6ubuntu2.6)
Depends: libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libgssrpc4t64 (>= 1.7dfsg~alpha1), libk5crypto3 (>= 1.20), libkrb5-3 (>= 1.14+dfsg), libkrb5support0 (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc, krb5-user
Breaks: krb5-kdc (= 1.13~alpha1+dfsg-1), libkadm5srv-mit8 (<< 1.11+dfsg~), libkdb5-10 (<< 1.20.1-6ubuntu2.6)
Description: MIT Kerberos runtime libraries - Kerberos database
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the internal Kerberos database libraries.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.6.3-3build1
Depends: libc6 (>= 2.7)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git
Original-Maintainer: Christian Kastner <[email protected]>

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: klibc
Version: 2.0.13-4ubuntu0.2
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: Debian Kernel Team <[email protected]>

Package: libkmod2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 31+20240202-2ubuntu7.2
Depends: libc6 (>= 2.38), liblzma5 (>= 5.4.5-0.2), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1015
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: libkrb5support0 (= 1.20.1-6ubuntu2.6), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkeyutils1 (>= 1.5.9), libssl3t64 (>= 3.0.0)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4), libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libkrb5-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 149
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Replaces: krb5-multidev (<< 1.8+dfsg~alpha1-3)
Depends: krb5-multidev (= 1.20.1-6ubuntu2.6)
Suggests: krb5-doc
Conflicts: heimdal-dev
Description: headers and development libraries for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the symlinks, headers, and development libraries
 needed to compile and link programs that use the Kerberos libraries.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 133
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-6ubuntu2.6
Depends: libc6 (>= 2.38)
Breaks: krb5-admin-server (<< 1.20.1-4~), krb5-kdc (<< 1.20.1-4~), krb5-pkinit (<< 1.20.1-4~), krb5-user (<< 1.20.1-4~), libgssapi-krb5-2 (<< 1.20), libk5crypto3 (<< 1.20.1-4~), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit12 (<< 1.20.1-4~), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-10t64 (<< 1.20.1-4~), libkdb5-8 (<< 1.16), libkrb5-3 (<< 1.20.1-4~)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: https://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libksba
Version: 1.6.6-1build1
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.46)
Description: X.509 and CMS support library
 KSBA (pronounced Kasbah) is a library to make X.509 certificates as
 well as the CMS easily accessible by other applications.  Both
 specifications are building blocks of S/MIME and TLS.
 .
 KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
 Encoder, Certificate Handling and CMS Handling.
 .
 This package contains the runtime library files.
Homepage: https://www.gnupg.org/related_software/libksba/
Original-Maintainer: Debian GnuTLS Maintainers <[email protected]>

Package: liblapack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7126
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lapack
Version: 3.12.0-3build1.1
Provides: liblapack.so.3
Depends: libblas3 | libblas.so.3, libc6 (>= 2.29), libgcc-s1 (>= 4.0), libgfortran5 (>= 8)
Description: Library of linear algebra routines 3 - shared version
 LAPACK version 3.X is a comprehensive FORTRAN library that does
 linear algebra operations including matrix inversions, least
 squared solutions to linear sets of equations, eigenvector
 analysis, singular value decomposition, etc. It is a very
 comprehensive and reputable package that has found extensive
 use in the scientific community.
 .
 This package contains a shared version of the library.
Homepage: https://www.netlib.org/lapack/
Original-Maintainer: Debian Science Team <[email protected]>

Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.14-2ubuntu0.1
Depends: libc6 (>= 2.29)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. LittleCMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/
Original-Maintainer: Thomas Weber <[email protected]>

Package: libldap-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.6.10+dfsg-0ubuntu0.24.04.1
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
 /etc/ldap/ldap.conf 4f02c6860a58b7402a4b5c5ec24aa7b2
Description: OpenLDAP common files for libraries
 These are common files for the run-time libraries for the OpenLDAP
 (Lightweight Directory Access Protocol) servers and clients.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <[email protected]>

Package: libldap-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1550
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.6.10+dfsg-0ubuntu0.24.04.1
Replaces: libldap2-dev (<< 2.5.4+dfsg-1~)
Provides: libldap2-dev
Depends: libldap2 (= 2.6.10+dfsg-0ubuntu0.24.04.1)
Breaks: libldap2-dev (<< 2.5.4+dfsg-1~)
Description: OpenLDAP development libraries
 This package allows development of LDAP applications using the OpenLDAP
 libraries. It includes headers, libraries and links to allow static and
 dynamic linking.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <[email protected]>

Package: libldap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 541
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.6.10+dfsg-0ubuntu0.24.04.1
Depends: libc6 (>= 2.38), libgnutls30t64 (>= 3.8.2), libsasl2-2 (>= 2.1.28+dfsg1)
Recommends: libldap-common
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <[email protected]>

Package: libldap2-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 82
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: openldap
Version: 2.6.10+dfsg-0ubuntu0.24.04.1
Depends: libldap-dev
Description: transitional package for libldap-dev
 This is a transitional package from libldap2-dev to libldap-dev. It can be
 safely removed.
Homepage: https://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <[email protected]>

Package: liblerc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 972
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-4ubuntu2
Depends: liblerc4 (= 4.0.0+ds-4ubuntu2)
Description: Limited Error Raster Compression library (Development files)
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
 .
 This is a development package of LERC.
Homepage: https://github.com/Esri/lerc
Original-Maintainer: Debian GIS Project <[email protected]>

Package: liblerc4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 568
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-4ubuntu2
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: Limited Error Raster Compression library
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
Homepage: https://github.com/Esri/lerc
Original-Maintainer: Debian GIS Project <[email protected]>

Package: liblilv-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 121
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lilv
Version: 0.24.22-1build1
Depends: libc6 (>= 2.34), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.14.0~dfsg0), libsratom-0-0 (>= 0.4.6~dfsg0), libzix-0-0 (>= 0.4.2)
Description: library for simple use of LV2 plugins
 Lilv (formerly SLV2) is a library for LV2 hosts intended to make using
 LV2 Plugins as simple as possible (without sacrificing capabilities).
 .
 Lilv is the successor to SLV2, rewritten to be significantly faster
 and have minimal dependencies.
 .
 This package provides the shared library.
Homepage: https://drobilla.net/software/lilv.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libllvm20
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140245
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-20
Version: 1:20.1.2-0ubuntu1~24.04.2
Replaces: llvm-20-dev (<< 1:20~++20240830999999+99)
Depends: libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 13.1), libxml2 (>= 2.7.4), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.0)
Breaks: llvm-20-dev (<< 1:20~++20240830999999+99)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Original-Maintainer: LLVM Packaging Team <[email protected]>
Homepage: https://www.llvm.org/

Package: liblmdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lmdb
Version: 0.9.31-1build1
Depends: libc6 (>= 2.38)
Description: Lightning Memory-Mapped Database shared library
 This package contains the LMDB shared library.
 .
 Lighting Memory-Mapped Database (LMDB) is an ultra-fast, ultra-compact
 key-value embedded data store developed for the OpenLDAP Project.  It uses
 memory-mapped files, so it has the read performance of a pure in-memory
 database while still offering the persistence of standard disk-based
 databases, and is only limited to the size of the virtual address space, (it
 is not limited to the size of physical RAM).
Homepage: https://symas.com/mdb/
Original-Maintainer: LMDB <[email protected]>

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 52
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.07-6ubuntu5
Depends: libc6 (>= 2.3)
Pre-Depends: perl-base (>= 5.38.2-3), perlapi-5.38.2
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/Locale-gettext
Original-Maintainer: Debian Perl Group <[email protected]>

Package: liblqr-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: liblqr
Version: 0.4.2-2.1build2
Depends: libc6 (>= 2.27), libglib2.0-0t64 (>= 2.24.0)
Description: converts plain array images into multi-size representation
 The LiquidRescale (lqr) library provides a C/C++ API for performing
 non-uniform resizing of images by the seam-carving technique.
 .
 The library takes images in plain array format as input and converts
 them to a multi-size representation.
 .
 Following is a list of features:
 .
   * Areas in the image can be marked for preservation or discard
   * Once the image has been fully processed, the scaling can be done
     in real-time. In fact, the information can be saved and read out
     later without any further processing
   * The resizing is done with a single function which automatically
     performs all the necessary operations; it can also work in
     successive steps without wasting computational time
   * Possibility to tune the carving operation by letting the seams be
     less connected, or more rigid, or both
   * Can export and import the visibility map (the seams)
   * Other images can be attached and undergo the same carving process
     as the parent image
   * The automatic feature detection algorithm can be tuned by
     selecting among different energy gradient functions
   * Reports progress through a customizable interface
   * A signalling system permits one to cleanly handle errors
 .
 The library implements the algorithm described in the paper "Seam
 Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
 Shamir, which can be found at
 http://www.faculty.idc.ac.il/arik/imret.pdf
 .
 This package contains the shared library.
Homepage: http://liblqr.wikidot.com/
Original-Maintainer: Bernd Zeimetz <[email protected]>

Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3828
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: LeakSanitizer -- a memory leak detector (runtime)
 LeakSanitizer (Lsan) is a memory leak detector which is integrated
 into AddressSanitizer.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libltdl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 940
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.7-7build1
Replaces: libbtldl3-dev
Provides: libltdl3-dev
Depends: libltdl7 (= 2.4.7-7build1), automake-1.16
Recommends: libtool
Suggests: libtool-doc
Conflicts: libltdl3-dev
Description: System independent dlopen wrapper for GNU libtool (headers)
 This package contains the header files and static libraries for the
 libltdl package.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <[email protected]>

Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 421
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.7-7build1
Depends: libc6 (>= 2.38)
Description: System independent dlopen wrapper for GNU libtool
 This package contains the run-time libltdl library.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <[email protected]>

Package: liblua5.1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 422
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lua5.1
Version: 5.1.5-9build2
Depends: libc6 (>= 2.38), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.1
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: http://www.lua.org
Original-Maintainer: Debian QA Group <[email protected]>

Package: liblua5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 494
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lua5.3
Version: 5.3.6-2build2
Depends: libc6 (>= 2.38), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.3
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: https://www.lua.org
Original-Maintainer: Debian Lua Team <[email protected]>

Package: liblua5.4-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 558
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lua5.4
Version: 5.4.6-3build2
Depends: libc6 (>= 2.38), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.4
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: http://www.lua.org
Original-Maintainer: Debian Lua Team <[email protected]>

Package: libluajit-5.1-2
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 602
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: luajit
Version: 2.1.0+git20231223.c525bcb+dfsg-1
Replaces: libluajit2-5.1-2
Depends: libluajit-5.1-common (= 2.1.0+git20231223.c525bcb+dfsg-1), libc6 (>= 2.38), libgcc-s1 (>= 3.3)
Conflicts: libluajit2-5.1-2
Description: Just in time compiler for Lua - library version
 LuaJIT implements the full set of language features defined by Lua 5.1. The
 virtual machine (VM) is API- and ABI-compatible to the standard Lua interpreter
 and can be deployed as a drop-in replacement.
 .
 This package contains an embeddable version of LuaJIT that can be used as a
 replacement of the standard liblua-5.1 shared library.
Original-Maintainer: Debian Lua Team <[email protected]>
Homepage: https://luajit.org

Package: libluajit-5.1-common
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 218
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: luajit
Version: 2.1.0+git20231223.c525bcb+dfsg-1
Replaces: libluajit2-5.1-common
Conflicts: libluajit2-5.1-common
Description: Just in time compiler for Lua - common files
 This package contains files needed by the LuaJIT interpreter/jitter as well
 by its embeddable (i.e. library) version.
Original-Maintainer: Debian Lua Team <[email protected]>
Homepage: https://luajit.org

Package: liblvm2cmd2.03
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3045
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.03.16-3ubuntu3.2
Depends: libaio1t64 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.38), libdevmapper-event1.02.1 (>= 2:1.02.74), libselinux1 (>= 3.1~), libsystemd0 (>= 233), libudev1 (>= 183), dmeventd
Description: LVM2 command library
 This package contains the lvm2cmd shared library.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <[email protected]>

Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.04-2
Depends: perl:any
Description: module to guess media type for a file or a URL
 LWP::MediaTypes provides functions for handling media (also known as MIME)
 types and encodings. The mapping from file extensions to media types is
 defined by the media.types file. If the ~/.media.types file exists it is used
 instead. For backwards compatibility it will also look for ~/.mime.types.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/LWP-MediaTypes

Package: liblwp-protocol-https-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 24
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.13-1
Depends: perl:any, ca-certificates, libio-socket-ssl-perl, libnet-http-perl, libwww-perl
Suggests: libcrypt-ssleay-perl
Description: HTTPS driver for LWP::UserAgent
 The LWP::Protocol::https module provides support for using HTTPS schemed URLs
 with LWP. LWP::Protocol::https is a plug-in to the LWP protocol handling, so
 you don't use it directly. Once the module is installed LWP is able to access
 sites using HTTP over SSL/TLS.
 .
 If hostname verification is requested by LWP::UserAgent's ssl_opts, and
 neither SSL_ca_file nor SSL_ca_path is set, then SSL_ca_file is implied to be
 the one provided by ca-certificates.
 .
 This module used to be bundled with libwww-perl, but it was unbundled in
 v6.02 in order to be able to declare its dependencies properly for the CPAN
 tool-chain. Applications that need HTTPS support can just declare their
 dependency on LWP::Protocol::https and will no longer need to know what
 underlying modules to install.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/LWP-Protocol-https

Package: liblz4-1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 155
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 1.9.4-1build1.1
Replaces: liblz4-1a
Depends: libc6 (>= 2.14)
Breaks: liblz4-1a
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/lz4/lz4
Original-Maintainer: Nobuhiro Iwamatsu <[email protected]>

Package: liblzf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: liblzf
Version: 3.6-4
Depends: libc6 (>= 2.4)
Description: Very small data compression library
 This library implements the very, very fast LZF compression algorithm written
 in C. Compression ratios are moderate with 40 to 50 percent for typical
 binary data, but decompression speed is basically at unoptimized memcpy
 speed.
Original-Maintainer: Timo Röhling <[email protected]>
Homepage: http://software.schmorp.de/pkg/liblzf.html

Package: liblzma-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 783
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.6.1+really5.4.5-1ubuntu0.3
Depends: liblzma5 (= 5.6.1+really5.4.5-1ubuntu0.3)
Suggests: liblzma-doc
Description: XZ-format compression library - development files
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.) This package provides the
 development library needed to build programs using liblzma.
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <[email protected]>

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 379
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.6.1+really5.4.5-1ubuntu0.3
Depends: libc6 (>= 2.34)
Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <[email protected]>

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lzo2
Version: 2.10-2build4
Depends: libc6 (>= 2.14)
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: https://www.oberhumer.com/opensource/lzo/
Original-Maintainer: Stephen Kitt <[email protected]>

Package: libmagic-mgc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8335
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.45-3build1
Replaces: libmagic1t64 (<< 1:5.28-4~)
Breaks: libmagic1t64 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1t64 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <[email protected]>

Package: libmagic1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 211
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.45-3build1
Replaces: libmagic1
Provides: libmagic1 (= 1:5.45-3build1)
Depends: libbz2-1.0, libc6 (>= 2.38), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.45-3build1)
Suggests: file
Breaks: libmagic1 (<< 1:5.45-3build1)
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: https://www.darwinsys.com/file/
Original-Maintainer: Christoph Biedl <[email protected]>

Package: libmagickcore-6.q16-7-extra
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 297
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.12.98+dfsg1-5.2build2
Provides: libmagickcore-6.q16-1-extra, libmagickcore-6.q16-2-extra, libmagickcore-6.q16-3-extra, libmagickcore-6.q16-4-extra, libmagickcore-6.q16-5-extra, libmagickcore-6.q16-6-extra, libmagickcore-extra
Depends: libc6 (>= 2.38), libcairo2 (>= 1.6.0), libdjvulibre21 (>= 3.5.28), libglib2.0-0t64 (>= 2.12.0), libmagickcore-6.q16-7t64 (>= 8:6.9.11.24), libmagickwand-6.q16-7t64 (>= 8:6.9.12.98+dfsg1-5.2build2), libopenexr-3-1-30 (>= 3.1.5), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libwmflite-0.2-7 (>= 0.2.12), libxml2 (>= 2.7.4)
Recommends: libjxr-tools
Suggests: inkscape
Enhances: libmagickcore-6.q16-7t64
Description: low-level image manipulation library - extra codecs (Q16)
 This package adds support for SVG, WMF, OpenEXR, DjVu and Graphviz to
 MagickCore.
 .
 This version of libmagickcore-extra is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <[email protected]>

Package: libmagickcore-6.q16-7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6648
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.12.98+dfsg1-5.2build2
Replaces: libmagickcore-6.q16-7
Provides: libmagickcore-6.q16-7 (= 8:6.9.12.98+dfsg1-5.2build2)
Depends: libbz2-1.0, libc6 (>= 2.38), libfftw3-double3 (>= 3.3.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.13.0), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.7), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.2), libraw23t64 (>= 0.16.0), libtiff6 (>= 4.5.0~rc1), libwebp7 (>= 1.3.2), libwebpdemux2 (>= 1.3.2), libwebpmux3 (>= 1.3.2), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, fonts-urw-base35
Suggests: libmagickcore-6.q16-7-extra
Breaks: libmagickcore-6.q16-7 (<< 8:6.9.12.98+dfsg1-5.2build2)
Description: low-level image manipulation library -- quantum depth Q16
 The MagickCore API is a low-level interface between the C programming language
 and the ImageMagick image processing libraries and is recommended for
 wizard-level programmers only. Unlike the MagickWand C API which uses only a
 few opaque types and accessors, with MagickCore you almost exclusively access
 the structure members directly.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickCore.
 .
 This version of libmagickcore is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <[email protected]>

Package: libmagickwand-6.q16-7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1352
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.12.98+dfsg1-5.2build2
Replaces: libmagickwand-6.q16-7
Provides: libmagickwand-6.q16-7 (= 8:6.9.12.98+dfsg1-5.2build2)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-7t64 (>= 8:6.9.12.89), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Breaks: libmagickwand-6.q16-7 (<< 8:6.9.12.98+dfsg1-5.2build2)
Description: image manipulation library -- quantum depth Q16
 The MagickWand API is the recommended interface between the C programming
 language and the ImageMagick image processing libraries. Unlike the
 MagickCore C API, MagickWand uses only a few opaque types. Accessors are
 available to set or get important wand properties.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickWand.
 .
 This version of libmagickwand is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/
Original-Maintainer: ImageMagick Packaging Team <[email protected]>

Package: libmailtools-perl
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 220
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 2.21-2
Depends: perl:any, libnet-perl, libnet-smtp-ssl-perl, libtest-simple-perl, libtimedate-perl
Description: modules to manipulate email in perl programs
 MailTools is a set of perl modules which provide an easy interface to
 manipulating email in an object-oriented fashion.
 .
  Mail::Address - Parse mail addresses
  Mail::Cap - Parse mailcap files
  Mail::Field - Base class for manipulation of mail header fields
  Mail::Field::AddrList - object representation of e-mail address lists
  Mail::Field::Date - a date header field
  Mail::Field::Generic - implementation for inspecific fields
  Mail::Filter - Filter mail through multiple subroutines
  Mail::Header - manipulate MIME headers
  Mail::Internet - manipulate email messages
  Mail::Mailer - Simple interface to electronic mailing mechanisms
  Mail::Send - Simple electronic mail interface
  Mail::Util - mail utility functions
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/MailTools

Package: libmariadb3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 540
Maintainer: MariaDB Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Replaces: libmariadbclient18 (<< 1:11.8.6+maria~ubu2404)
Depends: mariadb-common, libc6 (>= 2.34), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libmariadbclient18 (<< 1:11.8.6+maria~ubu2404)
Conflicts: libmariadbclient18 (<< 10.2.0), mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5
Description: MariaDB database client library
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client library.
Homepage: https://mariadb.org/

Package: libmaxminddb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmaxminddb
Version: 1.9.1-1build1
Depends: libc6 (>= 2.33)
Suggests: mmdb-bin
Description: IP geolocation database library
 The libmaxminddb library provides a C library for reading MaxMind DB files,
 including the GeoIP2 databases from MaxMind. This is a custom binary format
 designed to facilitate fast lookups of IP addresses while allowing for great
 flexibility in the type of data associated with an address.
 .
 The MaxMind DB format is an open format. The spec is available at
 https://maxmind.github.io/MaxMind-DB/. This spec is licensed under the Creative
 Commons Attribution-ShareAlike 3.0 Unported License.
Homepage: https://maxmind.github.io/libmaxminddb/
Original-Maintainer: Faidon Liambotis <[email protected]>

Package: libmbedcrypto7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 528
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mbedtls
Version: 2.28.8-1
Replaces: libmbedcrypto7
Provides: libmbedcrypto7 (= 2.28.8-1)
Depends: libc6 (>= 2.14)
Breaks: libmbedcrypto7 (<< 2.28.8-1)
Description: lightweight crypto and SSL/TLS library - crypto library
 mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for
 providing SSL and TLS support in your programs. It offers an intuitive API and
 documented header files, so you can actually understand what the code does.
 It features:
  - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia
    and XTEA
  - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5
  - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG
  - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA
    and ECDH
  - TLS 1.0, 1.1 and 1.2
  - Abstraction layers for ciphers, hashes, public key operations, platform
    abstraction and threading
 .
 This package contains the shared library handling cryptography.
Original-Maintainer: Debian IoT Maintainers <[email protected]>
Homepage: https://www.trustedfirmware.org/projects/mbed-tls/

Package: libmcrypt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 367
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libmcrypt
Version: 2.5.8-7
Replaces: libmcrypt4 (<< 2.5.8-1)
Depends: libmcrypt4 (= 2.5.8-7)
Description: De-/Encryption Library development files
 libmcrypt is the library which implements all the algorithms and
 modes found in mcrypt.
 .
 libmcrypt supports the algorithms: BLOWFISH, TWOFISH, DES, TripleDES,
 3-WAY, SAFER-sk64, SAFER-sk128, SAFER+, LOKI97, GOST, RC2, RC6, MARS,
 IDEA, RIJNDAEL-128, RIJNDAEL-192, SERPENT, RIJNDAEL-256, CAST-128
 (known as CAST5), CAST-256, ARCFOUR, ENIGMA, PANAMA, XTEA and WAKE.
 Block algorithms can be used in: CBC, ECB, CFB and OFB (8 bit and n
 bit, where n is the size of the algorithm's block length).
 .
 More information can be found at the libmcrypt homepage
 http://mcrypt.sourceforge.net/ .
Original-Maintainer: Barak A. Pearlmutter <[email protected]>
Homepage: http://mcrypt.sourceforge.net/

Package: libmcrypt4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 195
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libmcrypt
Version: 2.5.8-7
Depends: libc6 (>= 2.14)
Suggests: libmcrypt-dev, mcrypt
Description: De-/Encryption Library
 libmcrypt is the library which implements all the algorithms and
 modes found in mcrypt.
 .
 libmcrypt supports the algorithms: BLOWFISH, TWOFISH, DES, TripleDES,
 3-WAY, SAFER-sk64, SAFER-sk128, SAFER+, LOKI97, GOST, RC2, RC6, MARS,
 IDEA, RIJNDAEL-128, RIJNDAEL-192, SERPENT, RIJNDAEL-256, CAST-128
 (known as CAST5), CAST-256, ARCFOUR, ENIGMA, PANAMA, XTEA and WAKE.
 Block algorithms can be used in: CBC, ECB, CFB and OFB (8 bit and n
 bit, where n is the size of the algorithm's block length).
 .
 More information can be found at the libmcrypt homepage
 http://mcrypt.sourceforge.net/ .
Original-Maintainer: Barak A. Pearlmutter <[email protected]>
Homepage: http://mcrypt.sourceforge.net/

Package: libmd-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 219
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmd
Version: 1.1.0-2build1.1
Depends: libmd0 (= 1.1.0-2build1.1)
Description: message digest functions from BSD systems - development files
 This package contains the header files and static library needed to
 compile applications that use libmd.
 .
 The currently provided hashing algorithms are:
 .
  * MD2
  * MD4
  * MD5
  * RIPEMD-160
  * SHA-1
  * SHA-2 (SHA-224, SHA-256, SHA-384, SHA-512/256 and SHA-512)
Homepage: https://www.hadrons.org/software/libmd/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libmd0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmd
Version: 1.1.0-2build1.1
Depends: libc6 (>= 2.33)
Description: message digest functions from BSD systems - shared library
 The libmd library provides various message digest ("hash") functions,
 as found on various BSDs on a library with the same name and with a
 compatible API.
Homepage: https://www.hadrons.org/software/libmd/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libmemcached11t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmemcached
Version: 1.1.4-1.1build3
Replaces: libmemcached11
Provides: libmemcached11 (= 1.1.4-1.1build3)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libhashkit2t64 (>= 1.1.4), libsasl2-2 (>= 2.1.28+dfsg1), libstdc++6 (>= 4.1.1)
Breaks: libmemcached11 (<< 1.1.4-1.1build3)
Description: C and C++ client library to the memcached server
 libmemcached is a C and C++ client library to the memcached server
 (http://memcached.org/). It has been designed to be light on memory
 usage, thread safe, and provide full access to server side methods.
 .
 A few notes on its design:
 .
   * Synchronous and Asynchronous support.
   * Access to large object support.
   * Local replication.
   * TCP and Unix Socket protocols.
   * A half dozen or so different tuneable hash algorithms.
   * Implementations of the new cas, replace, and append operators.
   * Man pages written up on entire API.
   * Implements both modulo and consistent hashing solutions.
   * Tools to Manage your Memcached networks.
 .
 This package provides the libmemcached shared library itself.
Homepage: https://awesomized.github.io/libmemcached/
Original-Maintainer: Ondřej Surý <[email protected]>

Package: libmhash2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 204
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mhash
Version: 0.9.9.9-9build3
Depends: libc6 (>= 2.38)
Description: Library for cryptographic hashing and message authentication
 Mhash is a library that provides a uniform interface to a large
 number of hash algorithms.  These algorithms can be used to compute
 checksums, message digests, and other signatures.  The HMAC support
 implements the basics for message authentication, following RFC 2104.
 Mhash also provides several key-generation algorithms, including
 those of OpenPGP (RFC 2440).
 .
 This package contains the shared library.
Homepage: http://mhash.sourceforge.net/
Original-Maintainer: Barak A. Pearlmutter <[email protected]>

Package: libmilter-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 672
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sendmail
Version: 8.18.1-2
Depends: libmilter1.0.1 (= 8.18.1-2)
Suggests: sendmail-doc
Description: Sendmail Mail Filter API (Milter) (development files)
 The Sendmail Mail Filter API (Milter) is designed to allow third-party
 programs access to mail messages as they are being processed in order
 to filter meta-information (headers) and content.
 .
 The Debian Sendmail package is built to support libmilter.
 .
 This is the libmilter static library and include files for development.
 .
 The documentation on building a Milter is in the sendmail-doc package.
Original-Maintainer: Debian QA Group <[email protected]>
Homepage: http://www.sendmail.org

Package: libmilter1.0.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 297
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sendmail
Version: 8.18.1-2
Depends: libc6 (>= 2.34)
Description: Sendmail Mail Filter API (Milter)
 The Sendmail Mail Filter API (Milter) is designed to allow third-party
 programs access to mail messages as they are being processed in order
 to filter meta-information(headers) and content.
 .
 The Debian Sendmail package is built to support libmilter.
 .
 This package contains libmilter.so
Original-Maintainer: Debian QA Group <[email protected]>
Homepage: http://www.sendmail.org

Package: libmnl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.5-2build1
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: https://netfilter.org/projects/libmnl/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libmodule-find-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.16-2
Depends: perl:any
Description: module to find and use installed Perl modules
 Module::Find is a Perl module that allows developers to find and use modules
 in categories. This is useful for auto-detecting driver or plugin modules.
 You can differentiate between looking in the category itself or in all
 subcategories.
 .
 If you want Module::Find to search in a certain directory (like the plugins
 directory of your software installation), make sure you modify @INC before
 you call the Module::Find functions.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Module-List

Package: libmodule-scandeps-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.35-1ubuntu0.24.04.1
Depends: perl:any, libmodule-metadata-perl, libscalar-list-utils-perl, libversion-perl
Description: module to recursively scan Perl code for dependencies
 Module::ScanDeps is a Perl module that scans potential modules used by perl
 programs to determine information about modules they depend on. It performs
 static analysis as well as more aggressive scanning (by running files in
 compile-only or normal mode).
Homepage: https://metacpan.org/release/Module-ScanDeps
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libmount-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 87
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libblkid-dev, libc6-dev | libc-dev, libmount1 (= 2.39.3-9ubuntu6.5), libselinux1-dev
Description: device mounting library - headers
 This device mounting library is used by mount and umount helpers.
 .
 This package contains the development environment for the mount library.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 367
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Suggests: cryptsetup-bin
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libmp3lame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 318
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lame
Version: 3.100-6build1
Depends: libc6 (>= 2.38)
Description: MP3 encoding library
 LAME (recursive acronym for "LAME Ain't an MP3 Encoder") is a research
 project for learning about and improving MP3 encoding technology.
 LAME includes an MP3 encoding library, a simple frontend application,
 and other tools for sound analysis, as well as convenience tools.
 .
 This package contains the shared library.
Homepage: https://lame.sourceforge.io/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libmpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mpclib3
Version: 1.3.1-1build1.1
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.3.0+dfsg), libmpfr6 (>= 4.0.0)
Description: multiple precision complex floating-point library
 MPC is a portable library written in C for arbitrary precision
 arithmetic on complex numbers providing correct rounding. For the time
 being, it contains all arithmetic operations over complex numbers, the
 exponential and the logarithm functions, the trigonometric and
 hyperbolic functions.
 .
 Ultimately, it should implement a multiprecision equivalent of the ISO
 C99 standard.
 .
 It builds upon the GNU MP and the MPFR libraries.
Homepage: http://www.multiprecision.org/mpc/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libmpfr6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1186
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 4.2.1-1build1.1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg)
Breaks: libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: https://www.mpfr.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libmpg123-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 391
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mpg123
Version: 1.32.5-1ubuntu1.1
Replaces: libmpg123-0
Provides: libmpg123-0 (= 1.32.5-1ubuntu1.1)
Depends: libc6 (>= 2.29)
Breaks: libmpg123-0 (<< 1.32.5-1ubuntu1.1)
Description: MPEG layer 1/2/3 audio decoder (shared library)
 mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for layers
 1, 2 and 3 (MPEG 1.0 layer 3 also known as MP3).
 .
 This package contains the C libraries needed to run executables that use
 the mpg123 library.
Homepage: http://mpg123.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libmspack0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmspack
Version: 0.11-1.1build1
Replaces: libmspack0
Provides: libmspack0 (= 0.11-1.1build1)
Depends: libc6 (>= 2.14)
Breaks: libmspack0 (<< 0.11-1.1build1)
Description: library for Microsoft compression formats (shared library)
 The purpose of libmspack is to provide both compression and decompression of
 some loosely related file formats used by Microsoft. The intention is to
 support all of the following formats: COMPRESS.EXE [SZDD],
 Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
 HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
 Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/
Original-Maintainer: Marc Dequènes (Duck) <[email protected]>

Package: libmysofa1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1267
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libmysofa
Version: 1.3.2+dfsg-2ubuntu2
Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4)
Description: library to read HRTFs stored in the AES69-2015 SOFA format
 libmysofa is a light weight C-library intended to read SOFA (Spatially Oriented
 Format for Acoustics) files for spatial rendering.
 It hardly has any library dependencies and is suitable for embedded devices.
 .
 It reads SOFA files and checks whether the data complies to the
 "SimpleFreeFieldHRIR" conventions. In addition, it provides functions to
 look-up and interpolate the filters for a given orientation and to normalize
 the HRTFs (Head-Related Transfer Functions) to a reference level.
 .
 This package contains the shared objects necessary to run an application using
 libmysofa.
Homepage: https://github.com/hoene/libmysofa
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libmysqlclient21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6687
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mysql-8.0
Version: 8.0.46-0ubuntu0.24.04.2
Depends: mysql-common (>= 5.5), libc6 (>= 2.38), libgcc-s1 (>= 3.4), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: MySQL database client library
 MySQL is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MySQL are speed, robustness and
 ease of use.
 .
 This package includes the client library.
Homepage: http://dev.mysql.com/
Original-Maintainer: Debian MySQL Maintainers <[email protected]>

Package: libncurses-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2360
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Replaces: ncurses-dev
Provides: libncurses5-dev (= 6.4+20240113-1ubuntu2), libncursesw5-dev (= 6.4+20240113-1ubuntu2), libtinfo-dev (= 6.4+20240113-1ubuntu2), ncurses-dev
Depends: libtinfo6 (= 6.4+20240113-1ubuntu2), libncurses6 (= 6.4+20240113-1ubuntu2), libncursesw6 (= 6.4+20240113-1ubuntu2), libc6-dev | libc-dev
Suggests: ncurses-doc
Conflicts: ncurses-dev
Description: developer's libraries for ncurses
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the header files, static libraries
 and symbolic links that developers using ncurses will need.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: libncurses6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 336
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Depends: libtinfo6 (= 6.4+20240113-1ubuntu2), libc6 (>= 2.34)
Recommends: libgpm2
Breaks: cowdancer (<< 0.89~)
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: libncursesw6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 422
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Depends: libtinfo6 (= 6.4+20240113-1ubuntu2), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: libnet-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.23-1
Depends: perl:any, libio-socket-ip-perl, liburi-perl
Recommends: libio-socket-ssl-perl
Description: module providing low-level HTTP connection client
 The Net::HTTP class is a low-level HTTP client.  An instance of the
 Net::HTTP class represents a connection to an HTTP server.  The
 HTTP protocol is described in RFC 2616.  The Net::HTTP class
 supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET.
 You can mix its methods with reading and writing from the socket directly.
 This is not necessarily a good idea, unless you know what you are doing.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Net-HTTP

Package: libnet-smtp-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 19
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 1.04-2
Depends: libio-socket-ssl-perl, perl:any
Recommends: libauthen-sasl-perl
Description: Perl module providing SSL support to Net::SMTP
 Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL
 for its network operations. Due to the nature of Net::SMTP's new method, it is
 not overridden to make use of a default port for the SMTPS service. Perhaps
 future versions will be smart like that. Port 465 is usually what you want,
 and it's not a pain to specify that.
 .
 This package is deprecated. Net::SMTP (in perl core) has support for SMTP
 over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22).
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Net-SMTP-SSL

Package: libnet-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1323
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 1.94-1build4
Depends: perl (>= 5.38.2-3.2build2), perl-openssl-abi-3, perlapi-5.38.2, libc6 (>= 2.14), libssl3t64 (>= 3.0.0)
Description: Perl module for Secure Sockets Layer (SSL)
 Net::SSLeay is a perl module that allows you to call Secure Sockets Layer
 (SSL) functions of the SSLeay library directly from your perl scripts. It
 is useful if you want to program robots that access secure web servers or
 if you want to build your own applications over SSL encrypted tunnels. If
 you just want to view web pages on https servers, you do not need this -
 your web browser already knows to do that.
Homepage: https://metacpan.org/release/Net-SSLeay
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.9-6build1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0 (>= 1.0.2)
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Homepage: https://www.netfilter.org/projects/libnetfilter_conntrack/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libnetpbm11t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 343
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: netpbm-free
Version: 2:11.05.02-1.1build1
Replaces: libnetpbm11
Provides: libnetpbm10-dev, libnetpbm11 (= 2:11.05.02-1.1build1)
Depends: libc6 (>= 2.38)
Conflicts: libnetpbm11 (<< 2:11.05.02-1.1build1)
Description: Graphics conversion tools shared libraries
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
 .
 This package contains the shared libraries used by netpbm.
Homepage: https://netpbm.sourceforge.net/
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libnetplan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 377
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: netplan.io
Version: 1.1.2-8ubuntu1~24.04.2
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.75.3), libuuid1 (>= 2.16), libyaml-0-2
Description: Declarative network configuration runtime library
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package contains the necessary runtime library files.
Homepage: https://netplan.io/
Original-Maintainer: Debian Networking Team <[email protected]>

Package: libnettle8t64
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 424
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.9.1-2.2build1.1
Replaces: libnettle8
Provides: libnettle8 (= 3.9.1-2.2build1.1)
Depends: libc6 (>= 2.17)
Breaks: libnettle8 (<< 3.9.1-2.2build1.1)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Original-Maintainer: Magnus Holmgren <[email protected]>
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libnewt0.52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.24-2ubuntu2
Depends: libc6 (>= 2.38), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Conffiles:
 /etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
 /etc/newt/palette.ubuntu ac72ec93d29d94ad06bb3180f16cefb1
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <[email protected]>

Package: libnfnetlink0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.2-2build1
Depends: libc6 (>= 2.14)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.
Homepage: https://git.netfilter.org/libnfnetlink
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libnftables1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1015
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nftables
Version: 1.0.9-1ubuntu0.1
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libjansson4 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.6), libxtables12 (>= 1.6.0+snapshot20161117)
Description: Netfilter nftables high level userspace API library
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables library.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libnftnl11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 230
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnftnl
Version: 1.2.6-2build1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Description: Netfilter nftables userspace API library
 libnftnl is the low-level library for Netfilter 4th generation
 framework nftables.
 .
 Is the user-space library for low-level interaction with
 nftables Netlink's API over libmnl.
Homepage: https://git.netfilter.org/libnftnl
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 200
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.59.0-1ubuntu0.3
Depends: libc6 (>= 2.17)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/
Original-Maintainer: Tomasz Buchert <[email protected]>

Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 172
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.7.0-0.3build1.1
Depends: libc6 (>= 2.38)
Conffiles:
 /etc/libnl-3/classid 3e07259e58674631830b152e983ca995
 /etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: http://www.infradead.org/~tgr/libnl/
Original-Maintainer: Heiko Stuebner <[email protected]>

Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.7.0-0.3build1.1
Depends: libnl-3-200 (= 3.7.0-0.3build1.1), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Homepage: http://www.infradead.org/~tgr/libnl/
Original-Maintainer: Heiko Stuebner <[email protected]>

Package: libnl-route-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 632
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.7.0-0.3build1.1
Depends: libnl-3-200 (= 3.7.0-0.3build1.1), libc6 (>= 2.38)
Description: library for dealing with netlink sockets - route interface
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the configuration interfaces of the NETLINK_ROUTE family.
Homepage: http://www.infradead.org/~tgr/libnl/
Original-Maintainer: Heiko Stuebner <[email protected]>

Package: libnorm1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 388
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: norm
Version: 1.5.9+dfsg-3.1build1
Replaces: libnorm1
Provides: libnorm1 (= 1.5.9+dfsg-3.1build1)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5)
Breaks: libnorm1 (<< 1.5.9+dfsg-3.1build1)
Description: NACK-Oriented Reliable Multicast (NORM) library
 The NORM protocol is designed to provide end-to-end reliable transport of
 bulk data objects or streams over generic IP multicast routing and forwarding
 services.
 libnorm provides a shared library and an API to use such protocol.
Homepage: https://www.nrl.navy.mil/itd/ncs/products/norm
Original-Maintainer: Luca Boccassi <[email protected]>

Package: libnpth0t64
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 42
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.6-3.1build1
Replaces: libnpth0
Provides: libnpth0 (= 1.6-3.1build1)
Depends: libc6 (>= 2.34)
Breaks: libnpth0 (<< 1.6-3.1build1)
Description: replacement for GNU Pth using system threads
 nPth is a non-preemptive threads implementation using an API very
 similar to the one known from GNU Pth. It has been designed as a
 replacement of GNU Pth for non-ancient operating systems. In
 contrast to GNU Pth it is based on the system's standard threads
 implementation. Thus nPth allows the use of libraries which are not
 compatible to GNU Pth.
Homepage: https://www.gnupg.org/
Original-Maintainer: Eric Dorland <[email protected]>

Package: libnsl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-3build3
Depends: libc6 (>= 2.33), libtirpc3t64 (>= 1.0.2)
Description: Public client interface for NIS(YP) and NIS+
 This package contains the libnsl library, which contains the public client
 interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is
 now standalone to be able to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnsl
Original-Maintainer: GNU Libc Maintainers <[email protected]>

Package: libnspr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 309
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nspr
Version: 2:4.35-1.1build1
Depends: libc6 (>= 2.38)
Description: NetScape Portable Runtime Library
 This library provides platform independent non-GUI operating system
 facilities including:
  * threads,
  * thread synchronisation,
  * normal file I/O and network I/O,
  * interval timing and calendar time,
  * basic memory management (malloc and free),
  * shared library linking.
Homepage: http://www.mozilla.org/projects/nspr/
Original-Maintainer: Maintainers of Mozilla-related packages <[email protected]>

Package: libnspr4-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1156
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: nspr
Version: 2:4.35-1.1build1
Depends: libnspr4 (>= 2:4.35), libnspr4 (<= 2:4.35-1.1build1.1~)
Breaks: libxmlsec1-dev (<= 1.2.33-1)
Description: Development files for the NetScape Portable Runtime library
 This library provides platform independent non-GUI operating system
 facilities including:
  * threads,
  * thread synchronisation,
  * normal file I/O and network I/O,
  * interval timing and calendar time,
  * basic memory management (malloc and free),
  * shared library linking.
 .
 Install this package if you wish to develop your own programs using the
 NetScape Portable Runtime library.
Homepage: http://www.mozilla.org/projects/nspr/
Original-Maintainer: Maintainers of Mozilla-related packages <[email protected]>

Package: libnss-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 485
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 255.4-1ubuntu8.16
Depends: libc6 (>= 2.39), libcap2 (>= 1:2.10), systemd (= 255.4-1ubuntu8.16)
Description: nss module providing dynamic user and group name resolution
 nss-systemd is a plug-in module for the GNU Name Service Switch (NSS)
 functionality of the GNU C Library (glibc), providing UNIX user and group name
 resolution for dynamic users and groups allocated through the DynamicUser=
 option in systemd unit files. See systemd.exec(5) for details on this
 option.
 .
 Installing this package automatically adds the module to /etc/nsswitch.conf.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: libnss3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3964
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.98-1ubuntu0.1
Depends: libc6 (>= 2.34), libnspr4 (>= 2:4.34), libsqlite3-0 (>= 3.5.9)
Description: Network Security Service libraries
 This is a set of libraries designed to support cross-platform development
 of security-enabled client and server applications. It can support SSLv2
 and  v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
 other security standards.
Homepage: https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS
Original-Maintainer: Maintainers of Mozilla-related packages <[email protected]>

Package: libnss3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1448
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: nss
Version: 2:3.98-1ubuntu0.1
Depends: libnss3 (= 2:3.98-1ubuntu0.1), libnspr4-dev (>= 4.6.6-1)
Breaks: libxmlsec1-dev (<< 1.2.33-1~)
Description: Development files for the Network Security Service libraries
 This is a set of libraries designed to support cross-platform development
 of security-enabled client and server applications. It can support SSLv2
 and  v4, TLS, PKCS #5, #7, #11, #12, S/MIME, X.509 v3 certificates and
 other security standards.
 .
 Install this package if you wish to develop your own programs using the
 Network Security Service Libraries.
Homepage: https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS
Original-Maintainer: Maintainers of Mozilla-related packages <[email protected]>

Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.18-1ubuntu0.24.04.1
Depends: libc6 (>= 2.38)
Description: Libraries for controlling NUMA policy
 Library to control specific NUMA (Non-Uniform Memory Architecture)
 scheduling or memory placement policies.
Homepage: https://github.com/numactl/numactl
Original-Maintainer: Ian Wienand <[email protected]>

Package: libnvme1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 249
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libnvme
Version: 1.8-3ubuntu1
Replaces: libnvme1
Provides: libnvme1 (= 1.8-3ubuntu1)
Depends: libc6 (>= 2.38), libjson-c5 (>= 0.15), libkeyutils1 (>= 1.5.9), libssl3t64 (>= 3.0.0)
Suggests: nvme-cli
Breaks: libnvme1 (<< 1.8-3ubuntu1)
Description: NVMe management library (library)
 NVM Express (NVMe) is a interface specification for accessing non-volatile
 storage media, typically modern solid state drives (SSDs) through PCI Express
 (PCIe). libnvme provides library functions for accessing and managing NVMe
 devices.
 .
 This package contains the shared library.
Homepage: https://github.com/linux-nvme/libnvme
Original-Maintainer: Daniel Baumann <[email protected]>

Package: libogg0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libogg
Version: 1.3.5-3build1
Depends: libc6 (>= 2.14)
Description: Ogg bitstream library
 Libogg is a library for manipulating ogg bitstreams.  It handles
 both making ogg bitstreams and getting packets from ogg bitstreams.
Homepage: https://xiph.org/ogg/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libonig-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 197
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libonig
Version: 6.9.9-1build1
Depends: libonig5 (= 6.9.9-1build1)
Description: regular expressions library — development files
 Oniguruma is a library for working with regular expressions.
 .
 Different character encoding for every regular expression object can
 be specified.
 .
 This package provides development files and static libraries.
Homepage: https://github.com/kkos/oniguruma
Original-Maintainer: Jörg Frings-Fürst <[email protected]>

Package: libonig5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 629
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libonig
Version: 6.9.9-1build1
Depends: libc6 (>= 2.14)
Description: regular expressions library
 Oniguruma is a library for working with regular expressions.
 .
 Different character encoding for every regular expression object can
 be specified.
Homepage: https://github.com/kkos/oniguruma
Original-Maintainer: Jörg Frings-Fürst <[email protected]>

Package: libopenal-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 256
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: openal-soft
Version: 1:1.23.1-4build1
Replaces: libopenal1 (<< 1:1.14-5)
Breaks: libopenal1 (<< 1:1.14-5)
Conffiles:
 /etc/openal/alsoft.conf c3c066879374fb8b7a8ecadb52fe2ec1
Description: Software implementation of the OpenAL audio API (data files)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This package installs data files used by the OpenAL Soft shared library.
Homepage: https://github.com/kcat/openal-soft
Original-Maintainer: Debian Games Team <[email protected]>

Package: libopenal1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1196
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openal-soft
Version: 1:1.23.1-4build1
Depends: libopenal-data (= 1:1.23.1-4build1), libc6 (>= 2.38), libgcc-s1 (>= 4.0), libsndio7.0 (>= 1.8.1), libstdc++6 (>= 6)
Recommends: libasound2t64 (>= 1.0.16), libpulse0 (>= 0.99.1)
Suggests: libportaudio2 (>= 19+svn20101113)
Description: Software implementation of the OpenAL audio API (shared library)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This library is meant as a compatible update/replacement to the OpenAL Sample
 Implementation (the SI). The SI has been unmaintained for quite a while, and
 would require a lot of work to clean up. This is a fork the old Windows version
 to attempt an accelerated ALSA version of an OpenAL implementation.
 .
 OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as
 opposed to the SI's 4-channel max (though it did have some provisions for 6
 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft
 does not support the Vorbis and MP3 extensions, however those were considered
 deprecated even in the SI. It does, though, support some of the newer
 extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and
 floating-point formats, as well as ALC_EXT_EFX for environmental audio effects,
 and others.
 .
 This package installs the OpenAL Soft shared library.
Homepage: https://github.com/kcat/openal-soft
Original-Maintainer: Debian Games Team <[email protected]>

Package: libopendbx1-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libopendbx
Version: 1.4.6-17
Provides: libopendbx1-backend
Depends: libopendbx1t64 (= 1.4.6-17), libc6 (>= 2.4), libsqlite3-0 (>= 3.5.9)
Description: SQLite3 backend for OpenDBX
 OpenDBX provides a simple and lightweight API for interfacing native
 relational database APIs in a consistent way. By using the OpenDBX API you
 don't have to adapt your program to the different database APIs by yourself.
 .
 This package contains the SQLite3 backend.
Original-Maintainer: Debian QA Group <[email protected]>
Homepage: http://www.linuxnetworks.de/doc/index.php/OpenDBX

Package: libopendbx1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libopendbx
Version: 1.4.6-17
Replaces: libopendbx1
Provides: libopendbx1 (= 1.4.6-17)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Recommends: libopendbx1-sqlite3 | libopendbx1-backend
Breaks: libopendbx1 (<< 1.4.6-17)
Description: Lightweight database access abstraction layer
 OpenDBX provides a simple and lightweight API for interfacing native
 relational database APIs in a consistent way. By using the OpenDBX API you
 don't have to adapt your program to the different database APIs by yourself.
 .
 The sqlite3 backend is recommended by default if no other backend is
 installed with libopendbx1t64
Original-Maintainer: Debian QA Group <[email protected]>
Homepage: http://www.linuxnetworks.de/doc/index.php/OpenDBX

Package: libopendkim11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 185
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: opendkim
Version: 2.11.0~beta2-9build4
Depends: libc6 (>= 2.38), libdb5.3t64, libssl3t64 (>= 3.0.0)
Description: DomainKeys Identified Mail (DKIM) library
 The OpenDKIM Project is a community effort to develop and maintain a C library
 for producing DKIM-aware applications and an open source milter for providing
 DomainKeys Identified Mail (DKIM) service.
 .
 This package provides library for implementing signing and verification of the
 DomainKeys Identified Mail (DKIM) standard. This library provides support for
 signing and verifying signatures according to RFC 4871, and supports both
 DomainKeys signing policy and DKIM ADSP.
Homepage: http://www.opendkim.org/
Original-Maintainer: David Bürgin <[email protected]>

Package: libopenexr-3-1-30
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4363
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openexr
Version: 3.1.5-5.1build3
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libimath-3-1-29t64 (>= 3.1.9), libstdc++6 (>= 13.1), zlib1g (>= 1:1.2.0)
Description: runtime files for the OpenEXR image library
 OpenEXR is a high dynamic-range (HDR) image file format developed by
 Industrial Light & Magic for use in computer imaging applications.
 .
 OpenEXR's features include:
    * Higher dynamic range and colour precision than existing 8- and
      10-bit image file formats.
    * Support for the "half" 16-bit floating-point pixel format.
    * Multiple lossless image compression algorithms. Some of the
      included codecs can achieve 2:1 lossless compression ratios on
      images with film grain.
    * Extensibility. New compression codecs and image types can easily
      be added by extending the C++ classes included in the OpenEXR
      software distribution. New image attributes (strings, vectors,
      integers, etc.) can be added to OpenEXR image headers without
      affecting backward compatibility with existing OpenEXR
      applications.
 .
 This package contains the following shared library:
    * IlmImf - a library that reads and writes OpenEXR images.
Homepage: https://www.openexr.com
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libopengl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.7.0-1build1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.7.0-1build1)
Description: Vendor neutral GL dispatch library -- OpenGL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for OpenGL.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libopeniscsiusr
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 157
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: open-iscsi
Version: 2.1.9-3ubuntu5.4
Depends: libc6 (>= 2.38), libkmod2 (>= 5~)
Enhances: open-iscsi
Description: iSCSI userspace library
 The Open-iSCSI project is a high-performance, transport independent,
 multi-platform implementation of RFC3720 iSCSI.
 .
 Open-iSCSI is partitioned into user and kernel parts.
 .
 The kernel portion of Open-iSCSI is a from-scratch code
 licensed under GPL. The kernel part implements iSCSI data path
 (that is, iSCSI Read and iSCSI Write), and consists of three
 loadable modules: scsi_transport_iscsi.ko, libiscsi.ko and iscsi_tcp.ko.
 .
 User space contains the entire control plane: configuration
 manager, iSCSI Discovery, Login and Logout processing,
 connection-level error processing, Nop-In and Nop-Out handling,
 and (in the future:) Text processing, iSNS, SLP, Radius, etc.
 .
 The user space Open-iSCSI consists of a daemon process called
 iscsid, and a management utility iscsiadm.
 .
 This package contains the iSCSI userspace library.
Homepage: https://www.open-iscsi.com/
Original-Maintainer: Debian iSCSI Maintainers <[email protected]>

Package: libopenjp2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 441
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.5.0-2ubuntu0.5
Depends: libc6 (>= 2.34)
Description: JPEG 2000 image compression/decompression library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the runtime files for openjpeg 2.x
Homepage: https://www.openjpeg.org
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: libopenmpt0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1596
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libopenmpt
Version: 0.7.3-1.1build3
Replaces: libopenmpt0
Provides: libopenmpt0 (= 0.7.3-1.1build3)
Depends: libc6 (>= 2.32), libgcc-s1 (>= 4.0), libmpg123-0t64 (>= 1.28.0), libstdc++6 (>= 13.1), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.1.2), zlib1g (>= 1:1.1.4)
Breaks: libopenmpt0 (<< 0.7.3-1.1build3)
Description: module music library based on OpenMPT -- shared library
 libopenmpt is a cross-platform C++ and C library to decode tracked music
 files (modules) into a raw PCM audio stream. It is based on the player code
 of the OpenMPT project, a descendant of the original ModPlug Tracker.
 .
 This package contains the main shared library.
Homepage: https://lib.openmpt.org/libopenmpt/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libopus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 405
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: opus
Version: 1.4-1build1
Depends: libc6 (>= 2.29)
Suggests: opus-tools
Description: Opus codec runtime library
 The Opus codec is designed for interactive speech and audio transmission over
 the Internet. It is designed by the IETF Codec Working Group and incorporates
 technology from Skype's SILK codec and Xiph.Org's CELT codec.
 .
 It is intended to suit a wide range of interactive audio applications,
 including Voice over IP, videoconferencing, in-game chat, and even remote live
 music performances.  It can scale from low bit-rate narrowband speech to very
 high quality stereo music. The current features are:
 .
  Bit-rates from 6 kb/s 510 kb/s
  Sampling rates from 8 to 48 kHz
  Frame sizes from 2.5 ms to 60 ms
  Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
  Audio bandwidth from narrowband to full-band
  Support for speech and music
  Support for mono and stereo
  Support for up to 255 channels (multistream frames)
  Dynamically adjustable bitrate, audio bandwidth, and frame size
  Good loss robustness and packet loss concealment (PLC)
  Floating point and fixed-point implementation
 .
 This package provides the Opus runtime library.
Homepage: http://www.opus-codec.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libp11-kit0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1712
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.25.3-4ubuntu2.1
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html
Original-Maintainer: Debian GnuTLS Maintainers <[email protected]>

Package: libpackagekit-glib2-18
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 440
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: packagekit
Version: 1.2.8-2ubuntu1.5
Depends: libc6 (>= 2.14), libglib2.0-0t64 (>= 2.79.0)
Description: Library for accessing PackageKit using GLib
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 This package provides an advanced library to access PackageKit using GLib.
 It makes use of only async D-Bus calls and provides high level tasks which
 peform the "transaction dance".
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <[email protected]>

Package: libpam-cap
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 57
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libcap2
Version: 1:2.66-5ubuntu2.4
Replaces: libcap2-bin (<< 1:2.66-1)
Depends: libpam-runtime (>= 1.1.3-2~), libc6 (>= 2.7), libcap2 (>= 1:2.63), libpam0g (>= 0.99.7.1)
Breaks: libcap2-bin (<< 1:2.66-1)
Conffiles:
 /etc/security/capability.conf 3d0f631b115f93405b44ab139322fa93
Description: POSIX 1003.1e capabilities (PAM module)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the PAM module for enforcing capabilities on users and
 groups at PAM session start time.
Homepage: https://sites.google.com/site/fullycapable/
Original-Maintainer: Christian Kastner <[email protected]>

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1150
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.5.3-5ubuntu5.5
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libdb5.3t64, libpam0g (>= 1.4.1), libselinux1 (>= 3.1~), libsystemd0, debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.5.3-5ubuntu5.5)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf dc21d0fd769d655b311d785670e5c6ae
 /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 0b1967ff9042a716ce6b01cb999aa1f5
 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc
 /etc/security/namespace.init 260eb0c3368ffaaf861e003e27618476
 /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc
 /etc/security/pwhistory.conf d3a2ff35a85d2e8baf2d06b3c0944a74
 /etc/security/sepermit.conf 3d82df292d497bbeaaf8ebef18cd14f1
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 270
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.5.3-5ubuntu5.5
Replaces: libpam-modules (<< 1.5.2-5~)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 276
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.5.3-5ubuntu5.5
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libpam-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 678
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 255.4-1ubuntu8.16
Provides: default-logind (= 255.4-1ubuntu8.16), logind (= 255.4-1ubuntu8.16)
Depends: libc6 (>= 2.39), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), systemd (= 255.4-1ubuntu8.16), libpam-runtime, default-dbus-system-bus | dbus-system-bus, systemd-sysv
Recommends: dbus-user-session
Conflicts: libpam-elogind-compat
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.5.3-5ubuntu5.5
Replaces: libpam0g-util, libpam0t64 (<< 1.5.3-5)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Breaks: libpam0t64 (<< 1.5.3-5)
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libpam0g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 394
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.5.3-5ubuntu5.5
Provides: libpam-dev
Depends: libpam0g (= 1.5.3-5ubuntu5.5), libc6-dev | libc-dev
Description: Development files for PAM
 Contains C header files and development libraries for libpam, the Pluggable
 Authentication Modules, a library that enables the local system
 administrator to choose how applications authenticate users.
 .
 PAM decouples applications from the authentication mechanism, making it
 possible to upgrade the authentication system without recompiling or
 rewriting the applications.
Homepage: http://www.linux-pam.org/
Original-Maintainer: Sam Hartman <[email protected]>

Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 530
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.52.1+ds-1build1
Depends: fontconfig, libc6 (>= 2.38), libfribidi0 (>= 1.0.0), libglib2.0-0t64 (>= 2.79.0), libharfbuzz0b (>= 7.3.0), libthai0 (>= 0.1.25)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.52.1+ds-1build1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.8.0), libfontconfig1 (>= 2.12.6), libglib2.0-0t64 (>= 2.79.0), libharfbuzz0b (>= 1.2.6), libpango-1.0-0 (= 1.52.1+ds-1build1), libpangoft2-1.0-0 (= 1.52.1+ds-1build1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.52.1+ds-1build1
Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), libglib2.0-0t64 (>= 2.79.0), libharfbuzz0b (>= 5.1.0), libpango-1.0-0 (= 1.52.1+ds-1build1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: libpaper-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 35
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: libpaper
Version: 1.1.29build1
Replaces: libpaper1 (<< 1.1.10), libpaperg (<< 1.1.9)
Depends: libc6 (>= 2.34), libpaper1
Description: library for handling paper characteristics (utilities)
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
 .
 This package contains utilities for setting the system's default
 paper type and for accessing paper type information from shell
 scripts.
Original-Maintainer: Giuseppe Sacco <[email protected]>

Package: libpaper1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpaper
Version: 1.1.29build1
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.33), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28), dpkg (>= 1.17.2)
Recommends: libpaper-utils
Description: library for handling paper characteristics
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
Original-Maintainer: Giuseppe Sacco <[email protected]>

Package: libparted2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 382
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.6-4build1
Replaces: libparted2
Provides: libparted, libparted2 (= 3.6-4build1)
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16), dmidecode
Suggests: parted, libparted-dev, libparted-i18n (= 3.6-4build1)
Conflicts: libparted2 (<< 3.6-4build1)
Description: disk partition manipulator - shared library
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <[email protected]>

Package: libpcap0.8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 363
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.10.4-4.1ubuntu3
Replaces: libpcap0.8, libpcap0.8-dev (<< 1.10.4-3)
Provides: libpcap0.8 (= 1.10.4-4.1ubuntu3)
Depends: libc6 (>= 2.38), libdbus-1-3 (>= 1.9.14), libibverbs1 (>= 1.1.6)
Breaks: libpcap0.8 (<< 1.10.4-4.1ubuntu3)
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, the libpcap authors created this system-independent API
 to ease in porting and to alleviate the need for several
 system-dependent packet capture modules in each application.
Homepage: https://www.tcpdump.org/
Original-Maintainer: Romain Francoise <[email protected]>

Package: libpci3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.10.0-2build1
Depends: libc6 (>= 2.38), libudev1 (>= 196), zlib1g (>= 1:1.1.4), pci.ids (>= 0.0~2019.11.10-2)
Description: PCI utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: https://mj.ucw.cz/sw/pciutils/
Original-Maintainer: Guillem Jover <[email protected]>

Package: libpciaccess0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpciaccess
Version: 0.17-3ubuntu0.24.04.2
Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4)
Suggests: pciutils
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independent way.
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libpcre16-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 554
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15build1
Depends: libc6 (>= 2.34)
Description: Old Perl 5 Compatible Regular Expression Library - 16 bit runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the 16 bit runtime library.
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre2-16-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 582
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-4ubuntu2.1
Depends: libc6 (>= 2.34)
Description: New Perl Compatible Regular Expression Library - 16 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 16 bit runtime library, which operates on
 UTF-16 input.
Homepage: https://pcre.org/
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre2-32-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 554
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-4ubuntu2.1
Depends: libc6 (>= 2.34)
Description: New Perl Compatible Regular Expression Library - 32 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 32 bit runtime library, which operates on
 UTF-32 input.
Homepage: https://pcre.org/
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre2-8-0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 635
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-4ubuntu2.1
Depends: libc6 (>= 2.34)
Description: New Perl Compatible Regular Expression Library- 8 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 8 bit runtime library, which operates on
 ASCII and UTF-8 input.
Homepage: https://pcre.org/
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2541
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-4ubuntu2.1
Depends: libc-dev, libpcre2-8-0 (= 10.42-4ubuntu2.1), libpcre2-16-0 (= 10.42-4ubuntu2.1), libpcre2-32-0 (= 10.42-4ubuntu2.1), libpcre2-posix3 (= 10.42-4ubuntu2.1)
Conflicts: libpcre3-dev (<< 2:8.35-8)
Description: New Perl Compatible Regular Expression Library - development files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the development files, including headers,
 static libraries, and documentation.
Homepage: https://pcre.org/
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre2-posix3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-4ubuntu2.1
Replaces: libpcre2-posix0
Depends: libc6 (>= 2.4), libpcre2-8-0 (>= 10.22)
Conflicts: libpcre2-posix0
Description: New Perl Compatible Regular Expression Library - posix-compatible runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the runtime library for the posix-compatible API.
Homepage: https://pcre.org/
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 682
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15build1
Depends: libc6 (>= 2.34)
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2215
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15build1
Depends: libc-dev, libpcre3 (= 2:8.39-15build1), libpcre16-3 (= 2:8.39-15build1), libpcre32-3 (= 2:8.39-15build1), libpcrecpp0v5 (= 2:8.39-15build1)
Description: Old Perl 5 Compatible Regular Expression Library - development files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the development files, including headers, static
 libraries, and documentation.
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcre32-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 530
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15build1
Depends: libc6 (>= 2.34)
Description: Old Perl 5 Compatible Regular Expression Library - 32 bit runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the 32 bit runtime library.
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libpcrecpp0v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 184
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15build1
Replaces: libpcre3 (<< 6.4-1.1), libpcrecpp0
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libpcre3, libstdc++6 (>= 13.1)
Conflicts: libpcre3 (<< 6.4-1.1), libpcrecpp0
Description: Old Perl 5 Compatible Regular Expression Library - C++ runtime files
 This is a C++ library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the C++ runtime library.
Original-Maintainer: Matthew Vernon <[email protected]>

Package: libperl5.38t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29333
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.38.2-3.2ubuntu0.2
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.204.001), libcompress-raw-zlib-perl (<< 2.204.001), libcompress-zlib-perl (<< 2.204), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.19), libio-compress-base-perl (<< 2.204), libio-compress-bzip2-perl (<< 2.204), libio-compress-perl (<< 2.204), libio-compress-zlib-perl (<< 2.204), libmime-base64-perl (<< 3.16.01), libmodule-corelist-perl (<< 2.14-2), libperl5.38, libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.36), libthreads-shared-perl (<< 1.68), libtime-hires-perl (<< 1.9775), libtime-piece-perl (<< 1.3401.01), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libperl5.38 (= 5.38.2-3.2ubuntu0.2)
Depends: libbz2-1.0, libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libgdbm-compat4t64 (>= 1.18-3), libgdbm6t64 (>= 1.21), zlib1g (>= 1:1.2.3.3), perl-modules-5.38 (>= 5.38.2-3.2ubuntu0.2)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.204.001), libcompress-raw-zlib-perl (<< 2.204.001), libcompress-zlib-perl (<< 2.204), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.19), libfilter-perl (<< 1.64), libio-compress-base-perl (<< 2.204), libio-compress-bzip2-perl (<< 2.204), libio-compress-perl (<< 2.204), libio-compress-zlib-perl (<< 2.204), libmime-base64-perl (<< 3.16.01), libperl5.38 (<< 5.38.2-3.2ubuntu0.2), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.36), libthreads-shared-perl (<< 1.68), libtime-hires-perl (<< 1.9775), libtime-piece-perl (<< 1.3401.01)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.38 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <[email protected]>

Package: libpgm-5.3-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpgm
Version: 5.3.128~dfsg-2.1build1
Replaces: libpgm-5.3-0
Provides: libpgm-5.3-0 (= 5.3.128~dfsg-2.1build1)
Depends: libc6 (>= 2.34)
Breaks: libpgm-5.3-0 (<< 5.3.128~dfsg-2.1build1)
Description: OpenPGM shared library
 OpenPGM is an open source implementation of the Pragmatic General Multicast
 (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable
 and scalable multicast protocol that enables receivers to detect loss,
 request retransmission of lost data, or notify an application of
 unrecoverable loss. PGM is a receiver-reliable protocol, which means the
 receiver is responsible for ensuring all data is received, absolving the
 sender of reception responsibility. PGM runs over a best effort datagram
 service, currently OpenPGM uses IP multicast but could be implemented above
 switched fabrics such as InfiniBand.
 .
 This is the runtime package for programs that use the OpenPGM library.
Homepage: https://github.com/steve-o/openpgm
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libpipeline1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Colin Watson <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.5.7-2
Depends: libc6 (>= 2.26)
Description: Unix process pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: https://libpipeline.gitlab.io/libpipeline/

Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 719
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.42.2-1build1
Depends: libc6 (>= 2.29)
Description: pixel-manipulation library for X and cairo
 A library for manipulating pixel regions -- a set of Y-X banded
 rectangles, image compositing using the Porter/Duff model
 and implicit mask generation for geometric primitives including
 trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libpkgconf3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pkgconf
Version: 1.8.1-2build1
Depends: libc6 (>= 2.38)
Description: shared library for pkgconf
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 libpkgconf is a library which provides access to most of pkgconf's
 functionality, to allow other tooling such as compilers and IDEs to
 discover and use libraries configured by pkgconf.
 .
 This package ships a shared library for libpkgconf.
Homepage: http://pkgconf.org/
Original-Maintainer: Andrej Shadura <[email protected]>

Package: libplacebo338
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8660
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libplacebo
Version: 6.338.2-2build1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), liblcms2-2 (>= 2.6), libstdc++6 (>= 13.1), libvulkan1 (>= 1.2.131.2)
Description: GPU-accelerated video/image rendering primitives (shared library)
 The library provides useful GPU-accelerated image processing primitives based
 on GLSL. It includes shader routines for decoding and transforming colors,
 tone mapping, dithering, and for various algorithms that sample from images,
 such as debanding and scaling.
 .
 This package contains the shared library.
Homepage: https://code.videolan.org/videolan/libplacebo
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libplist-2.0-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 121
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libplist
Version: 2.3.0-1~exp2build2
Depends: libc6 (>= 2.34)
Description: Library for handling Apple binary and XML property lists
 libplist is a library for reading and writing the Apple binary and XML
 property lists format. It's part of the libimobiledevice stack, providing
 access to iDevices (iPod, iPhone, iPad ...).
Homepage: https://www.libimobiledevice.org/
Original-Maintainer: gtkpod Maintainers <[email protected]>

Package: libplymouth5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 473
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: plymouth
Version: 24.004.60-1ubuntu7.1
Replaces: plymouth (<< 0.9.2-1~)
Depends: libc6 (>= 2.38), libevdev2 (>= 0.9.1), libpng16-16t64 (>= 1.6.2), libudev1 (>= 183), libxkbcommon0 (>= 0.5.0)
Breaks: plymouth (<< 0.9.2-1~)
Description: graphical boot animation and logger - shared libraries
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.
 .
 This package contains the shared libraries.
Homepage: https://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: libpng-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 759
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.43-5ubuntu0.6
Replaces: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Depends: libpng16-16t64 (= 1.6.43-5ubuntu0.6), zlib1g-dev
Recommends: libpng-tools
Breaks: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Conflicts: libpng12-0-dev, libpng12-dev, libpng2-dev, libpng3-dev
Description: PNG library - development (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the header and development files needed to build
 programs and packages using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Maintainers of libpng1.6 packages <[email protected]>

Package: libpng-tools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 97
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: libpng1.6
Version: 1.6.43-5ubuntu0.6
Replaces: libpng16-tools (<< 1.6.21-1)
Depends: libc6 (>= 2.34), libpng16-16t64 (= 1.6.43-5ubuntu0.6), zlib1g (>= 1:1.2.3.4)
Breaks: libpng16-tools (<< 1.6.21-1)
Description: PNG library - tools (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains a program to interact with libpng from the
 command line.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Maintainers of libpng1.6 packages <[email protected]>

Package: libpng16-16t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 331
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.43-5ubuntu0.6
Replaces: libpng16-16
Provides: libpng16-16 (= 1.6.43-5ubuntu0.6)
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.3.4)
Breaks: libpng16-16 (<< 1.6.43-5ubuntu0.6)
Description: PNG library - runtime (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Maintainers of libpng1.6 packages <[email protected]>

Package: libpocketsphinx3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 306
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pocketsphinx
Version: 0.8.0+real5prealpha+1-15ubuntu5
Depends: libc6 (>= 2.29), libsphinxbase3 (>= 0.8+5prealpha+1)
Recommends: pocketsphinx-en-us
Description: Speech recognition tool - front-end library
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the frontend shared library
Homepage: http://cmusphinx.sourceforge.net/
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libpolkit-agent-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 124-2ubuntu1.24.04.3
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.79.0), libpolkit-gobject-1-0 (= 124-2ubuntu1.24.04.3)
Description: polkit Authentication Agent API
 polkit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This package contains a library for accessing the authentication agent.
Homepage: https://github.com/polkit-org/polkit/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libpolkit-gobject-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 124-2ubuntu1.24.04.3
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.79.0), libsystemd0 (>= 213)
Description: polkit Authorization API
 polkit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This package contains a library for accessing polkit.
Homepage: https://github.com/polkit-org/polkit/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: libpopt0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.19+dfsg-1build1
Depends: libc6 (>= 2.38)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: https://github.com/rpm-software-management/popt
Original-Maintainer: Håvard F. Aasen <[email protected]>

Package: libpostproc57
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libavutil58 (>= 7:6.0), libc6 (>= 2.14)
Description: FFmpeg library for post processing - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides video post processing.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libpq-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 589
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: postgresql-16
Version: 16.14-0ubuntu0.24.04.1
Depends: libpq5 (= 16.14-0ubuntu0.24.04.1), libssl-dev
Suggests: postgresql-doc-16
Description: header files for libpq5 (PostgreSQL library)
 Header files and static library for compiling C programs to link
 with the libpq library in order to communicate with a PostgreSQL
 database backend.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <[email protected]>

Package: libpq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 436
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: postgresql-16
Version: 16.14-0ubuntu0.24.04.1
Depends: libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libldap2 (>= 2.6.2), libssl3t64 (>= 3.0.0)
Description: PostgreSQL C client library
 libpq is a C library that enables user programs to communicate with
 the PostgreSQL database server.  The server can be on another machine
 and accessed through TCP/IP.  This version of libpq is compatible
 with servers from PostgreSQL 8.2 or later.
 .
 This package contains the run-time library, needed by packages using
 libpq.
 .
 PostgreSQL is an object-relational SQL database management system.
Homepage: http://www.postgresql.org/
Original-Maintainer: Debian PostgreSQL Maintainers <[email protected]>

Package: libproc-processtable-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 107
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 0.636-1build3
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.38)
Description: Perl library for accessing process table information
 Proc::ProcessTable attempts to unify the interfaces to Unix process table
 information, without having to run a ps subprocess from within a perl or
 shell script and parse the output.
Homepage: https://metacpan.org/release/Proc-ProcessTable
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libproc2-0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 235
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:4.0.4-4ubuntu3.2
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.38), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libproc2 library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libproc2.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <[email protected]>

Package: libpsl5t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.21.2-1.1build1
Replaces: libpsl5
Provides: libpsl5 (= 0.21.2-1.1build1)
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring5 (>= 1.1)
Recommends: publicsuffix (>= 20150507)
Breaks: libpsl5 (<< 0.21.2-1.1build1)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl
Original-Maintainer: Tim Rühsen <[email protected]>

Package: libpthread-stubs0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 17
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libpthread-stubs
Version: 0.4-1build3
Description: pthread stubs not provided by native libc, development files
 This library provides weak aliases for pthread functions not provided
 in libc or otherwise available by default.  Libraries like libxcb rely
 on pthread stubs to use pthreads optionally, becoming thread-safe when
 linked to libpthread, while avoiding any performance hit when running
 single-threaded. libpthread-stubs supports this behavior even on
 platforms which do not supply all the necessary pthread stubs.
 .
 On platforms which already supply all the necessary pthread stubs, this
 package ships only the pkg-config file pthread-stubs.pc, to allow
 libraries to unconditionally express a dependency on pthread-stubs and
 still obtain correct behavior.
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libpulse0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 923
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: pulseaudio
Version: 1:16.1+dfsg1-2ubuntu10.1
Depends: libapparmor1 (>= 2.7.0~beta1+bzr1772), libasyncns0 (>= 0.3), libc6 (>= 2.38), libdbus-1-3 (>= 1.9.14), libsndfile1 (>= 1.0.20), libsystemd0, libx11-6, libx11-xcb1 (>= 2:1.8.7), libxcb1
Suggests: pulseaudio
Conffiles:
 /etc/pulse/client.conf 16bb1fd7704eae3f0e7dde080b83e197
Description: PulseAudio client libraries
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
Homepage: https://www.pulseaudio.org
Original-Maintainer: Pulseaudio maintenance team <[email protected]>

Package: libpython3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 37
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.12.3-0ubuntu2.1
Replaces: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1)
Depends: libpython3.12-dev (>= 3.12.3-0~)
Breaks: libpython3.8-dev (<< 3.8.0-2), python3-dev (<< 3.8.0-1)
Description: header files and a static library for Python (default)
 Header files, a static library and development tools for building
 Python modules, extending the Python interpreter or embedding Python
 in applications.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's headers (currently v3.12).
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 27
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.12.3-0ubuntu2.1
Depends: libpython3.12-stdlib (>= 3.12.3-0~)
Description: interactive high-level object-oriented language (default python3 version)
 This package contains the majority of the standard library for the Python
 language (default python3 version).
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's standard library (currently v3.12).
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libpython3.12-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 29028
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.3-1ubuntu0.13
Depends: libpython3.12-stdlib (= 3.12.3-1ubuntu0.13), libpython3.12t64 (= 3.12.3-1ubuntu0.13), libexpat1-dev, zlib1g-dev
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.12)
 Header files, a static library and development tools for building
 Python (v3.12) modules, extending the Python interpreter or embedding
 Python (v3.12) in applications.
 .
 Maintainers of Python packages should read README.maintainers.
 .
 This package contains development files. It is normally not
 used on it's own, but as a dependency of python3.12-dev.
Original-Maintainer: Matthias Klose <[email protected]>

Package: libpython3.12-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5183
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.3-1ubuntu0.13
Depends: libc6 (>= 2.14), libssl3t64 (>= 3.0.0)
Recommends: libpython3.12-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.12/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.12)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.12-minimal.
Original-Maintainer: Matthias Klose <[email protected]>

Package: libpython3.12-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 9024
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.3-1ubuntu0.13
Replaces: libpython3.12-testsuite (<< 3.12.0-3~), python3-gdbm (<< 3.9.9-1~)
Depends: libpython3.12-minimal (= 3.12.3-1ubuntu0.13), media-types | mime-support, netbase, tzdata, libbz2-1.0, libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libreadline8t64 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6)
Breaks: libpython3.12-testsuite (<< 3.12.0-3~), python3-gdbm (<< 3.9.9-1~)
Description: Interactive high-level object-oriented language (standard library, version 3.12)
 Python is a high-level, interactive, object-oriented language. Its 3.12 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.12's standard library. It is normally not
 used on its own, but as a dependency of python3.12.
Original-Maintainer: Matthias Klose <[email protected]>

Package: libpython3.12t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8919
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3.12
Version: 3.12.3-1ubuntu0.13
Replaces: libpython3.12
Provides: libpython3.12 (= 3.12.3-1ubuntu0.13)
Depends: libpython3.12-stdlib (= 3.12.3-1ubuntu0.13), libc6 (>= 2.38), libexpat1 (>= 2.6.0), zlib1g (>= 1:1.2.0)
Breaks: libpython3.12 (<< 3.12.3-1ubuntu0.13)
Description: Shared Python runtime library (version 3.12)
 Python is a high-level, interactive, object-oriented language. Its 3.12 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the shared runtime library, normally not needed
 for programs using the statically linked interpreter.
Original-Maintainer: Matthias Klose <[email protected]>

Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 300
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.38)
Description: GCC Quad-Precision Math Library
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: librabbitmq4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: librabbitmq
Version: 0.11.0-1build2
Depends: libc6 (>= 2.17), libssl3 (>= 3.0.0)
Description: AMQP client library written in C
 RabbitMQ provides robust messaging for applications. It is easy to use, fit
 for purpose at cloud scale and supported on all major operating systems and
 developer platforms. librabbitmq is a C-language AMQP client library for use
 with AMQP servers such as RabbitMQ speaking protocol versions 0-9-1.
 .
 This package includes the library itself.
Homepage: https://github.com/alanxz/rabbitmq-c
Original-Maintainer: Michael Fladischer <[email protected]>

Package: librav1e0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3237
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: rust-rav1e
Version: 0.7.1-2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: Fastest and safest AV1 encoder - shared library
 rav1e is a encoder for the AV1 video codec.
 .
 This package contains the shared library.
Original-Maintainer: Debian Rust Maintainers <[email protected]>
Homepage: https://github.com/xiph/rav1e

Package: libraw1394-11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libraw1394
Version: 2.1.2-2build3
Depends: libc6 (>= 2.14)
Suggests: libraw1394-doc
Description: library for direct access to IEEE 1394 bus (aka FireWire)
 libraw1394 is the only supported interface to the kernel side raw1394
 of the Linux IEEE-1394 subsystem, which provides direct access to the
 connected 1394 buses to user space.  Through libraw1394/raw1394,
 applications can directly send to and receive from other nodes without
 requiring a kernel driver for the protocol in question.
Homepage: https://ieee1394.wiki.kernel.org/
Original-Maintainer: Guus Sliepen <[email protected]>

Package: libraw23t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2362
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libraw
Version: 0.21.2-2.1ubuntu0.24.04.1
Replaces: libraw23
Provides: libraw23 (= 0.21.2-2.1ubuntu0.24.04.1)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libjpeg8 (>= 8c), liblcms2-2 (>= 2.2+git20110628), libstdc++6 (>= 5.2)
Breaks: libraw23 (<< 0.21.2-2.1ubuntu0.24.04.1)
Description: raw image decoder library
 LibRaw is a library for reading RAW files obtained from digital photo cameras
 (CRW/CR2, NEF, RAF, DNG, and others).
 .
 This package contains the shared library.
Homepage: https://www.libraw.org
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: librbl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: opendkim
Version: 2.11.0~beta2-9build4
Depends: libc6 (>= 2.34)
Description: Real-time Blacklist (RBL) query library
 The OpenDKIM Project is a community effort to develop and maintain a C library
 for producing DKIM-aware applications and an open source milter for providing
 DomainKeys Identified Mail (DKIM) service.
 .
 This package provides library for implementing OpenDKIM's RBL system.
Homepage: http://www.opendkim.org/
Original-Maintainer: David Bürgin <[email protected]>

Package: libreadline8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 467
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.2-4build1
Replaces: libreadline8
Provides: libreadline8 (= 8.2-4build1)
Depends: readline-common, libc6 (>= 2.38), libtinfo6 (>= 6)
Breaks: libreadline8 (<< 8.2-4build1)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html
Original-Maintainer: Matthias Klose <[email protected]>

Package: libreiserfscore0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 184
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: reiserfsprogs
Version: 1:3.6.27-7.1build1
Replaces: libreiserfscore0
Provides: libreiserfscore0 (= 1:3.6.27-7.1build1)
Depends: libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libuuid1 (>= 2.16)
Breaks: libreiserfscore0 (<< 1:3.6.27-7.1build1)
Description: ReiserFS core library
 The ReiserFS core library allows system programs like btrfs-progs to
 access and convert ReiserFS filesystems. Without implementing all
 ReiserFS code itself.
Original-Maintainer: Felix Zielcke <[email protected]>

Package: librist4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 187
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: librist
Version: 0.2.10+dfsg-2
Depends: libc6 (>= 2.38), libcjson1 (>= 1.7.5), libmbedcrypto7t64 (>= 2.28.0)
Description: Reliable Internet Stream Transport -- shared library
 Reliable Internet Stream Transport (RIST) is a transport protocol
 designed for reliable transmission of video over lossy networks
 (including the Internet) with low latency and high quality.
 .
 RIST is intended as a more reliable successor to Secure Reliable
 Transport (SRT), and as an open alternative to proprietary commercial
 options such as Zixi, VideoFlow, QVidium, and DVEO (Dozer).
 .
 This package contains the shared library.
Original-Maintainer: Florian Ernst <[email protected]>
Homepage: https://code.videolan.org/rist/librist

Package: librsvg2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6707
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.58.0+dfsg-1build1
Depends: libc6 (>= 2.38), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.15.8), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.25.2), libglib2.0-0t64 (>= 2.54.0), libpango-1.0-0 (>= 1.48.11), libpangocairo-1.0-0 (>= 1.48.11), libxml2 (>= 2.9.0)
Recommends: librsvg2-common
Suggests: librsvg2-bin
Description: SAX-based renderer library for SVG files (runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package contains the runtime library, necessary to run
 applications using librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: librsvg2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.58.0+dfsg-1build1
Depends: librsvg2-2 (= 2.58.0+dfsg-1build1), libgdk-pixbuf-2.0-0 (>= 2.23.5-2), libglib2.0-0t64 (>= 2.50.0)
Description: SAX-based renderer library for SVG files (extra runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package includes the gdk-pixbuf loader allowing
 to load SVG images transparently inside GTK+ applications.
Homepage: https://wiki.gnome.org/Projects/LibRsvg
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d.1-2build7
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30 (>= 3.8.1), libhogweed6, libnettle8, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: librubberband2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 335
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: rubberband
Version: 3.3.0+dfsg-2build1
Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libgcc-s1 (>= 3.3.1), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1)
Description: audio time-stretching and pitch-shifting library
 Rubber Band is a library and utility program that permits you to
 change the tempo and pitch of an audio recording independently of one
 another.
Homepage: https://www.breakfastquay.com/rubberband/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsamplerate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1483
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsamplerate
Version: 0.2.2-4build1
Depends: libc6 (>= 2.14)
Description: Audio sample rate conversion library
 libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion.
 .
 libsamplerate currently provides three different sample rate conversion
 algorithms; zero order hold, linear interpolation and FIR filter interpolation
 (using filters derived from the mathematical SINC function). The first two
 algorithms (zero order hold and linear) are included for completeness and are
 not recommended for any application where high quality sample rate conversion
 is required. For the FIR/Sinc algorithm, three converters are provided;
 SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a
 trade off between conversion speed and conversion quality.
 .
 libsamplerate is capable of downsampling to 1/256 of the original sample rate
 and upsampling to 256 times the original sample rate. It is also capable of
 time varying conversions for vary speed effects and synchronising of two
 unlocked sample rates.
Homepage: https://libsndfile.github.io/libsamplerate/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsasl2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-5ubuntu3.1
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.28+dfsg1-5ubuntu3.1), libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Recommends: libsasl2-modules (>= 2.1.28+dfsg1-5ubuntu3.1)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <[email protected]>

Package: libsasl2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 875
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-5ubuntu3.1
Depends: libc-dev, libsasl2-2 (= 2.1.28+dfsg1-5ubuntu3.1), libssl-dev
Description: Cyrus SASL - development files for authentication abstraction library
 This is the Cyrus SASL API implementation, version 2. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package includes development files for compiling programs with SASL
 support. It is needed for development purposes only.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <[email protected]>

Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 294
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-5ubuntu3.1
Replaces: libsasl2-modules-gssapi-mit (<< 2.1.28+dfsg-4)
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: libsasl2-modules-gssapi-mit (<< 2.1.28+dfsg-4)
Description: Cyrus SASL - pluggable authentication modules
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
 NTLM, SCRAM, CRAM-MD5, and DIGEST-MD5 (with DES support, deprecated).
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <[email protected]>

Package: libsasl2-modules-db
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-5ubuntu3.1
Depends: libc6 (>= 2.14), libdb5.3t64
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/sasl/
Original-Maintainer: Debian Cyrus Team <[email protected]>

Package: libsdl2-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1983
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsdl2
Version: 2.30.0+dfsg-1ubuntu3.1
Replaces: libsdl-1.3-0
Depends: libasound2t64 (>= 1.0.27), libc6 (>= 2.38), libdecor-0-0 (>= 0.1.1-2~), libdrm2 (>= 2.4.46), libgbm1 (>= 8.1~0), libpulse0 (>= 5.0), libsamplerate0 (>= 0.1.7), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.18), libwayland-egl1 (>= 1.18), libx11-6 (>= 2:1.2.99.901), libxcursor1 (>> 1.1.2), libxext6, libxfixes3 (>= 1:5.0), libxi6 (>= 2:1.5.99.2), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.2.99.3), libxss1
Suggests: xdg-utils
Conflicts: libsdl-1.3-0
Description: Simple DirectMedia Layer
 SDL is a library that allows programs portable low level access to a video
 framebuffer, audio output, mouse, and keyboard.
 .
 This version of SDL is compiled with X11 and Wayland graphics drivers and OSS,
 ALSA, sndio and PulseAudio sound drivers.
Homepage: https://www.libsdl.org/
Original-Maintainer: Debian SDL packages maintainers <[email protected]>

Package: libseccomp2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 143
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.5.5-1ubuntu3.1
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Original-Maintainer: Kees Cook <[email protected]>

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 200
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 3.5-2ubuntu2.1
Depends: libc6 (>= 2.38), libpcre2-8-0 (>= 10.22)
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <[email protected]>

Package: libselinux1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 717
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 3.5-2ubuntu2.1
Provides: libselinux-dev
Depends: libselinux1 (= 3.5-2ubuntu2.1), libsepol-dev (>= 3.5), libpcre2-dev
Conflicts: libselinux-dev
Description: SELinux development headers
 This package provides the  static libraries and header files
 needed for developing SELinux applications.  Security-enhanced Linux
 is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <[email protected]>

Package: libsemanage-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 26
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 3.5-1build5
Conffiles:
 /etc/selinux/semanage.conf 8e8dfac33a09c1b53ca08bf6d4201b10
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <[email protected]>

Package: libsemanage2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 288
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 3.5-1build5
Depends: libsemanage-common (>= 3.5-1build5), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.38), libselinux1 (>= 3.5), libsepol2 (>= 3.5)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <[email protected]>

Package: libsensors-config
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 25
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: lm-sensors
Version: 1:3.6.0-9build1
Replaces: libsensors4
Suggests: lm-sensors
Breaks: libsensors4
Conffiles:
 /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e
 /etc/sensors3.conf 41bd2b70a6ce64a21c2d1f70b9eed091
Description: lm-sensors configuration files
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains the configuration files.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors
Original-Maintainer: Aurelien Jarno <[email protected]>

Package: libsensors5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.6.0-9build1
Depends: libsensors-config, libc6 (>= 2.38)
Suggests: lm-sensors
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains a shared library for querying lm-sensors.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors
Original-Maintainer: Aurelien Jarno <[email protected]>

Package: libsepol-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1678
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.5-2build1
Replaces: libsepol1-dev (<< 3.2)
Depends: libsepol2 (= 3.5-2build1)
Breaks: libsepol1-dev (<< 3.2)
Description: SELinux binary policy manipulation library and development files
 libsepol allows programs to easily modify SELinux binary policies.  This
 means changing the default values for booleans, or reading the policy for
 analysis.
 .
 This package contains the headers and archives used for linking it into your
 programs.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <[email protected]>

Package: libsepol2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 751
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.5-2build1
Depends: libc6 (>= 2.38)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: https://selinuxproject.org
Original-Maintainer: Debian SELinux maintainers <[email protected]>

Package: libserd-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: serd
Version: 0.32.2-1
Depends: libc6 (>= 2.29)
Suggests: serdi
Description: lightweight RDF syntax library
 Serd is a lightweight C library for RDF syntax which supports reading
 and writing Turtle and NTriples.
 .
 Serd is not intended to be a swiss-army knife of RDF syntax, but rather
 is suited to resource limited applications, or situations where a simple
 reader/writer with minimal dependencies is ideal (e.g. in LV2 hosts or
 plugins).
 .
 Serd is:
  * small: Serd is implemented in under 2500 lines1 of standard C code.
  * portable and dependency-free: Serd uses only the C standard library,
    and has no external dependencies, making it a lightweight dependency
    in every sense.
  * fast and lightweight: Serd (and the included serdi tool) can be used
    to stream abbreviated Turtle (unlike many other tools which can not
    stream since they must first build an internal model to abbreviate).
    In other words, Serd can re-serialise an unbounded amount of Turtle
    using a fixed amount of memory, preserving the abbreviations in the
    input.
  * conformant and well-tested: Serd is written to the Turtle, NTriples
    and URI specifications, and includes a comprehensive test suite which
    includes all the normative examples from the Turtle specification, all
    the "normal" examples from the URI specification, and additional tests
    added specifically for Serd. The test suite has over 96% code coverage
    (by line), and runs with zero memory errors or leaks.
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>
Homepage: https://drobilla.net/software/serd.html

Package: libsframe1
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 128
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.42-4ubuntu2.10
Depends: libc6 (>= 2.14)
Description: Library to handle the SFrame format (runtime library)
 SFrame stands for Simple Frame format.  SFrame format keeps track
 of the minimal necessary information needed for generating stack traces.
 .
 This package includes the libsframe shared library.
Homepage: https://www.gnu.org/software/binutils/
Original-Maintainer: Matthias Klose <[email protected]>

Package: libsgutils2-1.46-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sg3-utils
Version: 1.46-3ubuntu4
Replaces: libsgutils2-2 (<< 1.46-3ubuntu2)
Depends: libc6 (>= 2.34)
Suggests: sg3-utils
Breaks: libsgutils2-2 (<< 1.46-3ubuntu2)
Description: utilities for devices using the SCSI command set (shared libraries)
 Most OSes have SCSI pass-through interfaces that enable user space programs
 to send SCSI commands to a device and fetch the response. With SCSI to ATA
 Translation (SAT) many ATA disks now can process SCSI commands. Typically
 each utility in this package implements one SCSI command. See the draft
 standards at www.t10.org for SCSI command definitions plus SAT. ATA
 commands are defined in the draft standards at www.t13.org . For a mapping
 between supported SCSI and ATA commands and utility names in this package
 see the COVERAGE file
 .
 Shared library used by the utilities in the sg3-utils package.
Homepage: https://sg.danny.cz/sg/
Original-Maintainer: Ritesh Raj Sarraf <[email protected]>

Package: libsharpyuv-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libsharpyuv0 (= 1.3.2-0.4build3)
Description: Library for sharp RGB to YUV conversion (development files)
 This library provides the function to convert RGB to YUV420 using
 a downsampling algorithm that minimizes artefacts caused by chroma
 subsampling.
 .
 This package provides the development files.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libsharpyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libc6 (>= 2.29)
Description: Library for sharp RGB to YUV conversion
 This library provides the function to convert RGB to YUV420 using
 a downsampling algorithm that minimizes artefacts caused by chroma
 subsampling.
 .
 This package provides the shared library files.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libshine3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: shine
Version: 3.1.1-2build1
Depends: libc6 (>= 2.29)
Description: Fixed-point MP3 encoding library - runtime files
 Shine can be used to encode audio data on architectures with no floating
 point processing unit (FPU) at a much better rate than encoding
 libraries implemented using floating-point arithmetic.
 .
 This package contains the files needed to run a program compiled using
 Shine.
Homepage: https://github.com/savonet/shine
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.14-1ubuntu2
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libsigsegv/
Original-Maintainer: Debian Common Lisp Team <[email protected]>

Package: libslang2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2376
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.3-3build2
Depends: libc6 (>= 2.38)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Original-Maintainer: Alastair McKinstry <[email protected]>
Built-Using: unicode-data (= 15.1.0-1)
Homepage: http://www.jedsoft.org/slang/

Package: libsm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.3-1build3
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16)
Description: X11 Session Management library
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 171
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libc6 (>= 2.38)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libsnappy1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: snappy
Version: 1.1.10-1build1
Depends: libc6 (>= 2.14), libstdc++6 (>= 5.2)
Conflicts: libsnappy1
Description: fast compression/decompression library
 Snappy is a compression/decompression library. It does not aim for
 maximum compression, or compatibility with any other compression
 library; instead, it aims for very high speeds and reasonable
 compression.
 .
 For instance, compared to the fastest mode of zlib, Snappy
 is an order of magnitude faster for most inputs, but the resulting
 compressed files are anywhere from 20% to 100% bigger. On a single core
 of a Core i7 processor in 64-bit mode, Snappy compresses at about 250
 MB/sec or more and decompresses at about 500 MB/sec or more.
Homepage: https://google.github.io/snappy/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libsndfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 566
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsndfile
Version: 1.2.2-1ubuntu5.24.04.1
Depends: libc6 (>= 2.38), libflac12t64 (>= 1.3.0), libmp3lame0 (>= 3.100), libmpg123-0t64 (>= 1.28.0), libogg0 (>= 1.3.0), libopus0 (>= 1.1), libvorbis0a (>= 1.2.3), libvorbisenc2 (>= 1.1.2)
Description: Library for reading/writing audio files
 libsndfile is a library of C routines for reading and writing files containing
 sampled audio data.
 .
 Various versions of WAV (integer, floating point, GSM, and compressed formats);
 Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND
 formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files;
 Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS  (.PAF); Apple's Core Audio Format
 (CAF) and others.
Homepage: http://www.mega-nerd.com/libsndfile/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsndio7.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sndio
Version: 1.9.0-0.3build3
Replaces: libsndio7.1 (<= 1.8.1-1~exp2)
Depends: libasound2t64 (>= 1.0.17), libbsd0 (>= 0.0), libc6 (>= 2.38)
Suggests: sndiod
Breaks: libsndio7.1 (<= 1.8.1-1~exp2)
Description: Small audio and MIDI framework from OpenBSD, runtime libraries
 Sndio is a small, simple audio and MIDI framework, developed by the OpenBSD
 project. It provides a lightweight audio and MIDI server and a well-documented
 userspace API to access the server or audio hardware in a uniform way. Sndio is
 designed to work well for both desktop and professional music applications, and
 supports features found in more complex sound systems such as per-application
 volume control, software mixing, and network transparency.
 .
 This package contains the sndio userspace libraries.
Homepage: https://www.sndio.org/
Original-Maintainer: Peter Piwowarski <[email protected]>

Package: libsodium-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 796
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsodium
Version: 1.0.18-1ubuntu0.24.04.1
Depends: libsodium23 (= 1.0.18-1ubuntu0.24.04.1)
Description: Network communication, cryptography and signaturing library - headers
 NaCl (pronounced "salt") is a new easy-to-use high-speed software library for
 network communication, encryption, decryption, signatures, etc.
 .
 NaCl's goal is to provide all of the core operations needed to build
 higher-level cryptographic tools.
 .
 Sodium is a portable, cross-compilable, installable, packageable fork of NaCl,
 with a compatible API.
 .
 This package provides development headers needed for applications that use
 libsodium.
Homepage: https://www.libsodium.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libsodium23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 401
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsodium
Version: 1.0.18-1ubuntu0.24.04.1
Depends: libc6 (>= 2.34)
Description: Network communication, cryptography and signaturing library
 NaCl (pronounced "salt") is a new easy-to-use high-speed software library for
 network communication, encryption, decryption, signatures, etc.
 .
 NaCl's goal is to provide all of the core operations needed to build
 higher-level cryptographic tools.
 .
 Sodium is a portable, cross-compilable, installable, packageable fork of NaCl,
 with a compatible API.
Homepage: https://www.libsodium.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libsord-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sord
Version: 0.16.16-2build1
Depends: libc6 (>= 2.4), libserd-0-0 (>= 0.30), libzix-0-0 (>= 0.4.2)
Suggests: sordi
Description: library for storing RDF data in memory
 Sord is a lightweight C library for storing Resource
 Description Framework (RDF) data in memory.
 .
 Sord includes man pages for the library (man sord) and a
 simple command line utility (man sordi).
Homepage: https://drobilla.net/software/sord.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsort-naturally-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.03-4
Depends: perl:any
Description: Sort naturally - sort lexically except for numerical parts
 Sort::Naturally exports two functions, nsort and ncmp; they are used
 in implementing the idea of "natural sorting" algorithm.  With that natural
 sorting, numeric substrings are compared numerically, and other
 word-characters are compared lexically.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Sort-Naturally

Package: libsoxr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 209
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libsoxr
Version: 0.1.3-4build3
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: High quality 1D sample-rate conversion library
 The SoX Resampler library `libsoxr' performs one-dimensional sample-rate
 conversion - it may be used, for example, to resample PCM-encoded audio.
 .
 It aims to give fast and high quality results for any constant (rational or
 irrational) resampling ratio. Phase-response, preserved bandwidth, aliasing,
 and rejection level parameters are all configurable; alternatively, simple
 `preset' configurations may be selected.
 .
 A simple API is provided that allows interfacing using commonly-used sample
 formats and buffering schemes.
Homepage: http://sourceforge.net/projects/soxr/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libspeex1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: speex
Version: 1.2.1-2ubuntu2.24.04.1
Depends: libc6 (>= 2.29)
Suggests: speex
Description: The Speex codec runtime library
 Speex is an audio codec especially designed for compressing voice at low
 bit-rates for applications such as voice over IP (VoIP). In some senses,
 it is meant to be complementary to the Vorbis codec which places a greater
 emphasis on high-quality music reproduction.
 .
 This package provides the speex runtime library.
Homepage: https://www.speex.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsphinxbase3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 318
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sphinxbase
Version: 0.8+5prealpha+1-17build2
Replaces: libsphinxbase3
Provides: libsphinxbase3 (= 0.8+5prealpha+1-17build2)
Depends: libblas3 | libblas.so.3, libc6 (>= 2.34), liblapack3 | liblapack.so.3, libpulse0 (>= 0.99.1)
Breaks: libsphinxbase3 (<< 0.8+5prealpha+1-17build2)
Description: Speech recognition tool - shared library
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the shared library.
Homepage: https://cmusphinx.sourceforge.net/
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: libsqlite3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1731
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.45.1-1ubuntu2.5
Depends: libc6 (>= 2.38)
Breaks: crowdsec (<< 1.4), python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libsqlite3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3324
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.45.1-1ubuntu2.5
Depends: libsqlite3-0 (= 3.45.1-1ubuntu2.5), libc-dev
Suggests: sqlite3-doc
Description: SQLite 3 development files
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
 .
 This package contains the development files (headers, static libraries)
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libsratom-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: sratom
Version: 0.6.16-1build1
Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.16.16)
Description: library for serialising LV2 atoms to/from Turtle
 Sratom is a new C library for serialising LV2 atoms to/from Turtle.
 It is intended to be a full serialisation solution for LV2 atoms,
 allowing implementations to serialise binary atoms to strings and
 read them back again. This is particularly useful for saving plugin
 state, or implementing plugin control with network transparency.
 Sratom uses Serd and Sord to do the work, it is a small library
 implemented in a single source file, suitable for direct inclusion
 in projects if avoiding a dependency is desired.
Homepage: https://drobilla.net/software/sratom/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsrt1.5-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 820
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: srt
Version: 1.5.3-1build2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgnutls30 (>= 3.7.0), libnettle8, libstdc++6 (>= 13.1)
Description: Secure Reliable Transport UDP streaming library (GnuTLS flavour)
 SRT is a latency-aware UDP transport mechanism optimized for video streams.
 It detects and compensates for jitter and bandwidth fluctuations due to
 network congestion. It mitigates packet loss and supports AES encryption.
 .
 SSL support is provided by GnuTLS.
Homepage: https://github.com/Haivision/srt
Original-Maintainer: Florian Ernst <[email protected]>

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 69
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.47.0-2.4~exp1ubuntu4.1
Replaces: e2fsprogs (<< 1.34-1), libss2t64
Provides: libss2t64 (= 1.47.0-2.4~exp1ubuntu4.1)
Depends: libcom-err2, libc6 (>= 2.34)
Breaks: libss2t64 (<< 1.47.0-2.4~exp1)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: libssh-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 502
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.10.6-2ubuntu0.4
Depends: libc6 (>= 2.33), libgssapi-krb5-2 (>= 1.17), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: remmina (<< 1.2.31.2+dfsg-1+), remmina-plugin-nx (<< 1.2.31.2+dfsg-1+), x2goclient (<< 4.1.2.1-1+)
Description: tiny C SSH library (OpenSSL flavor)
 The ssh library was designed to be used by programmers needing a working SSH
 implementation by the mean of a library. The complete control of the client
 is made by the programmer. With libssh, you can remotely execute programs,
 transfer files, use a secure and transparent tunnel for your remote programs.
 With its SFTP implementation, you can play with remote files easily.
 .
 This package contains shared libraries linked against OpenSSL.
Homepage: https://www.libssh.org/
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: libssh-gcrypt-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 609
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.10.6-2ubuntu0.4
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.14), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.1.4)
Description: tiny C SSH library (gcrypt flavor)
 The ssh library was designed to be used by programmers needing a working SSH
 implementation by the mean of a library. The complete control of the client
 is made by the programmer. With libssh, you can remotely execute programs,
 transfer files, use a secure and transparent tunnel for your remote programs.
 With its SFTP implementation, you can play with remote files easily.
 .
 This package contains shared libraries linked against gcrypt.
Homepage: https://www.libssh.org/
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: libssh2-1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 415
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libssh2
Version: 1.11.0-4.1ubuntu0.24.04.1
Replaces: libssh2-1
Provides: libssh2-1 (= 1.11.0-4.1ubuntu0.24.04.1)
Depends: libc6 (>= 2.25), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libssh2-1 (<< 1.11.0-4.1ubuntu0.24.04.1)
Description: SSH2 client-side library
 libssh2 is a client-side C library implementing the SSH2 protocol.
 It supports regular terminal, SCP and SFTP (v1-v5) sessions;
 port forwarding, X11 forwarding; password, key-based and
 keyboard-interactive authentication.
 .
 This package contains the runtime library.
Homepage: https://libssh2.org/
Original-Maintainer: Nicolas Mora <[email protected]>

Package: libssl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 13004
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.13-0ubuntu3.9
Depends: libssl3t64 (= 3.0.13-0ubuntu3.9)
Suggests: libssl-doc
Description: Secure Sockets Layer toolkit - development files
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains development libraries, header files, and manpages for libssl
 and libcrypto.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <[email protected]>

Package: libssl3t64
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 6613
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.13-0ubuntu3.9
Replaces: libssl3
Provides: libssl3 (= 3.0.13-0ubuntu3.9)
Depends: libc6 (>= 2.38)
Breaks: libssl3 (<< 3.0.13-0ubuntu3.9)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <[email protected]>

Package: libstdc++-13-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 21662
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-13
Version: 13.3.0-6ubuntu2~24.04.1
Provides: libstdc++-dev
Depends: gcc-13-base (= 13.3.0-6ubuntu2~24.04.1), libgcc-13-dev (= 13.3.0-6ubuntu2~24.04.1), libstdc++6 (>= 13.3.0-6ubuntu2~24.04.1), libc6-dev (>= 2.13-0ubuntu6)
Suggests: libstdc++-13-doc
Description: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3110
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Replaces: libstdc++6-14-dbg (<< 4.9.0-3)
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.38), libgcc-s1 (>= 4.3)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libstemmer0d
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 842
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: snowball
Version: 2.2.0-4build1
Depends: libc6 (>= 2.4)
Description: Snowball stemming algorithms for use in Information Retrieval
 Snowball provides access to efficient algorithms for calculating a
 "stemmed" form of a word.  This is a form with most of the common
 morphological endings removed; hopefully representing a common
 linguistic base form.  This is most useful in building search engines
 and information retrieval software; for example, a search with stemming
 enabled should be able to find a document containing "cycling" given the
 query "cycles".
 .
 Snowball provides algorithms for several (mainly European) languages.
 It also provides access to the classic Porter stemming algorithm for
 English: although this has been superseded by an improved algorithm, the
 original algorithm may be of interest to information retrieval
 researchers wishing to reproduce results of earlier experiments.
Homepage: https://snowballstem.org/
Original-Maintainer: Stefano Rivera <[email protected]>

Package: libsvtav1enc1d1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7049
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: svt-av1
Version: 1.7.0+dfsg-2build1
Replaces: libsvtav1enc1 (<< 1.6.0+dfsg-2~)
Depends: libc6 (>= 2.34)
Breaks: libsvtav1enc1 (<< 1.6.0+dfsg-2~)
Description: Scalable Video Technology for AV1 (libsvtav1enc shared library)
 The Scalable Video Technology for AV1 (SVT-AV1 Encoder and Decoder) is an
 AV1-compliant encoder/decoder library core. The SVT-AV1 encoder development
 is a work-in-progress targeting performance levels applicable to both VOD and
 Live encoding / transcoding video applications. The SVT-AV1 decoder
 implementation is targeting future codec research activities.
 .
 This package provides the shared library libsvtav1enc.
Homepage: https://gitlab.com/AOMediaCodec/SVT-AV1
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libswresample4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libavutil58 (>= 7:6.1), libc6 (>= 2.29), libsoxr0 (>= 0.1.0)
Description: FFmpeg library for audio resampling, rematrixing etc. - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized audio resampling, rematrixing
 and sample format conversion operations.
 Specifically, this library performs the following conversions:
  * Resampling is the process of changing the audio rate, for example from a
    high sample rate of 44100Hz to 8000Hz. Audio conversion from high to low
    sample rate is a lossy process. Several resampling options and algorithms
    are available.
  * Rematrixing is the process of changing the channel layout, for example from
    stereo to mono. When the input channels cannot be mapped to the output
    streams, the process is lossy, since it involves different gain factors
    and mixing. Various other audio conversions (e.g. stretching and padding)
    are enabled through dedicated options.
  * Format conversion is the process of converting the type of samples, for
    example from 16-bit signed samples to unsigned 8-bit or float samples.
    It also handles packing conversion, when passing from packed layout (all
    samples belonging to distinct channels interleaved in the same buffer), to
    planar layout (all samples belonging to the same channel stored in a
    dedicated buffer or "plane").
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libswscale7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 689
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:6.1.1-3ubuntu5
Depends: libavutil58 (= 7:6.1.1-3ubuntu5), libc6 (>= 2.34)
Description: FFmpeg library for image scaling and various conversions - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized image scaling and colorspace and pixel
 format conversion operations.
 Specifically, this library performs the following conversions:
  * Rescaling is the process of changing the video size. Several rescaling
    options and algorithms are available. This is usually a lossy process.
  * Pixel format conversion is the process of converting the image format and
    colorspace of the image, for example from planar YUV420P to RGB24 packed.
    It also handles packing conversion, that is converts from packed layout
    (all pixels belonging to distinct planes interleaved in the same buffer),
    to planar layout (all samples belonging to the same plane stored in a
    dedicated buffer or "plane"). This is usually a lossy process in case the
    source and destination colorspaces differ.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libsybdb5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 480
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: freetds
Version: 1.3.17+ds-2build3
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30t64 (>= 3.8.1), libgssapi-krb5-2 (>= 1.17), libhogweed6t64, libnettle8t64, freetds-common
Description: libraries for connecting to MS SQL and Sybase SQL servers
 FreeTDS is an implementation of the Tabular DataStream protocol, used for
 connecting to MS SQL and Sybase servers over TCP/IP.
 .
 This package includes the shared libraries for the Sybase DB-Lib API.
Homepage: http://www.freetds.org/
Original-Maintainer: Joseph Nahmias <[email protected]>

Package: libsystemd-shared
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5868
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 255.4-1ubuntu8.16
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.30.2), libc6 (>= 2.39), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.4.0), libgcrypt20 (>= 1.10.0), libkmod2 (>= 15), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5)
Description: systemd shared private library
 This internal shared library provides common code used by various systemd
 components. It is supposed to decrease memory and disk footprint.
 The shared library is not meant for public use and is not API or ABI stable.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1027
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 255.4-1ubuntu8.16
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.5)
Description: systemd utility library
 This library provides APIs to interface with various system components such as
 the system journal, the system service manager, D-Bus and more.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: libtasn1-6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 122
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 4.19.0-3ubuntu0.24.04.2
Depends: libc6 (>= 2.38)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <[email protected]>

Package: libterm-readkey-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 70
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.38-2build4
Depends: perl (>= 5.38.2-3), perlapi-5.38.2, libc6 (>= 2.28)
Description: perl module for simple terminal control
 Term::ReadKey is a compiled perl module dedicated to providing simple
 control over terminal driver modes (cbreak, raw, cooked, etc.) support for
 non-blocking reads, if the architecture allows, and some generalized handy
 functions for working with terminals. One of the main goals is to have the
 functions as portable as possible, so you can just plug in "use
 Term::ReadKey" on any architecture and have a good likelihood of it working.
Homepage: https://metacpan.org/release/TermReadKey
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 41
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 0.04-11build3
Depends: libc6 (>= 2.4), perl-base (>= 5.38.2-3), perlapi-5.38.2
Description: get display widths of characters on the terminal
 Text::CharWidth permits one to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: https://metacpan.org/release/Text-CharWidth
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 47
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 1.7-8build3
Depends: libc6 (>= 2.4), perl-base (>= 5.38.2-3), perlapi-5.38.2
Description: module to convert between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: https://metacpan.org/release/Text-Iconv
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 24
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 0.06-10
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 The Text::WrapI18N module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters
 such as east Asian characters, combining characters such as diacritical marks
 and Thai, and languages which don't use whitespaces between words such as
 Chinese and Japanese.
 .
 It provides wrap().
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Text-WrapI18N

Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 587
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.29-2build1
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains data files needed by the LibThai library.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <[email protected]>

Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libthai
Version: 0.1.29-2build1
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains the shared libraries needed to run programs that use
 the LibThai library.
Homepage: https://linux.thai.net/projects/libthai
Original-Maintainer: Theppitak Karoonboonyanan <[email protected]>

Package: libtheora0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 656
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtheora
Version: 1.1.1+dfsg.1-16.1build3
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libogg0 (>= 1.1.0)
Description: Theora Video Compression Codec
 Theora is an open video codec being developed by the Xiph.org Foundation as
 part of their Ogg project. Theora is originally derived from On2's VP3 codec,
 and has improved on it significantly with the merging of code from the
 Thusnelda branch.
Homepage: https://www.theora.org/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libtidy-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1398
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tidy-html5
Version: 2:5.6.0-11ubuntu2
Replaces: libtidy-0.99-0
Depends: libtidy5deb1 (= 2:5.6.0-11ubuntu2)
Suggests: libdmalloc-dev
Breaks: libtidy-0.99-0
Description: HTML/XML syntax checker and reformatter - development
 Tidy corrects and cleans up HTML and XML documents by fixing
 markup errors and upgrading legacy code to modern standards.
 .
 This package contains the libtidy static library and the headers.
Homepage: https://www.html-tidy.org/
Original-Maintainer: Tidy HTML5 <[email protected]>

Package: libtidy5deb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1018
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tidy-html5
Version: 2:5.6.0-11ubuntu2
Depends: libc6 (>= 2.33)
Description: HTML/XML syntax checker and reformatter - shared library
 Tidy corrects and cleans up HTML and XML documents by fixing
 markup errors and upgrading legacy code to modern standards.
 .
 This package contains the libtidy shared library.
Homepage: https://www.html-tidy.org/
Original-Maintainer: Tidy HTML5 <[email protected]>

Package: libtiff-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1153
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.5.1+git230720-4ubuntu2.5
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libzstd-dev, libwebp-dev, libtiff6 (= 4.5.1+git230720-4ubuntu2.5), libtiffxx6 (= 4.5.1+git230720-4ubuntu2.5), zlib1g-dev, libdeflate-dev, liblerc-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Description: Tag Image File Format library (TIFF), development files
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libtiff6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 590
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.5.1+git230720-4ubuntu2.5
Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg8 (>= 8c), liblerc4 (>= 3.0), liblzma5 (>= 5.1.1alpha+20120614), libwebp7 (>= 1.3.2), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Breaks: libimager-perl (<< 1.022+dfsg)
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libtiffxx6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.5.1+git230720-4ubuntu2.5
Depends: libc6 (>= 2.4), libstdc++6 (>= 13.1), libtiff6 (>= 4.0.3)
Description: Tag Image File Format (TIFF) library -- C++ interface
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 123
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2.3300-2
Depends: perl:any
Description: collection of modules to manipulate date/time information
 TimeDate is a collection of Perl modules useful for manipulating date and
 time information. Date::Parse can parse absolute date specifications in a
 wide variety of input formats and many languages (via Date::Language).
 .
 This package also includes Date::Format, which can format dates into strings,
 as well as Time::Zone, which contains miscellaneous time zone functions.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/TimeDate

Package: libtinfo6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 556
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Depends: libc6 (>= 2.34)
Breaks: tmux (<< 3.3a-4)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: libtirpc-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: libtirpc
Version: 1.3.4+ds-1.1build1
Replaces: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~)
Breaks: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~)
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library - common files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the netconfig configuration file as well as the
 associated manpage.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <[email protected]>

Package: libtirpc3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.4+ds-1.1build1
Replaces: libtirpc3
Provides: libtirpc3 (= 1.3.4+ds-1.1build1)
Depends: libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.4+ds-1.1build1)
Breaks: libtirpc3 (<< 1.3.4+ds-1.1build1), nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc
Original-Maintainer: Josue Ortega <[email protected]>

Package: libtool
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1213
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2.4.7-7build1
Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev
Recommends: libltdl-dev
Suggests: libtool-doc, autoconf, automaken, gfortran | fortran95-compiler, gcj-jdk
Description: Generic library support script
 This is GNU libtool, a generic library support script.  Libtool hides
 the complexity of generating special library types (such as shared
 libraries) behind a consistent interface.  To use libtool, add the
 new generic library building commands to your Makefile, Makefile.in,
 or Makefile.am.  See the documentation for details.  Libtool supports
 building static libraries on all platforms.
 .
 Libtool supports generation of C, C++, Fortran and Java libraries.
Homepage: https://www.gnu.org/software/libtool/
Original-Maintainer: Alastair McKinstry <[email protected]>

Package: libtraceevent1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtraceevent
Version: 1:1.8.2-1ubuntu2.1
Depends: libc6 (>= 2.38)
Description: Linux kernel trace event library (shared library)
 The libtraceevent library provides APIs to access kernel tracepoint events,
 located in the tracefs file system under the events directory.
 .
 This package contains the shared library.
Original-Maintainer: Sudip Mukherjee <[email protected]>

Package: libtraceevent1-plugin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtraceevent
Version: 1:1.8.2-1ubuntu2.1
Depends: libc6 (>= 2.38), libtraceevent1 (= 1:1.8.2-1ubuntu2.1)
Description: Linux kernel trace event library (plugins)
 The libtraceevent library provides APIs to access kernel tracepoint events,
 located in the tracefs file system under the events directory.
 .
 This package provides the plugins needed by the programs using libtraceevent1.
Original-Maintainer: Sudip Mukherjee <[email protected]>

Package: libtracefs1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 173
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libtracefs
Version: 1.8.0-1ubuntu1
Depends: libc6 (>= 2.38), libtraceevent1 (>= 1:1.8.1)
Description: API to access the kernel tracefs directory (shared library)
 The libtracefs library provides APIs to access kernel tracefs file system.
 .
 This package contains the shared library.
Homepage: https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git
Original-Maintainer: Sudip Mukherjee <[email protected]>

Package: libtry-tiny-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 46
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.31-2
Depends: perl:any
Suggests: libsub-name-perl
Description: module providing minimalistic try/catch
 Try::Tiny is a Perl module that provides bare bones try/catch statements. It
 is designed to eliminate common mistakes with eval blocks, and NOTHING else.
 .
 The main focus of this module is to provide simple and reliable error
 handling for those having a hard time installing TryCatch, but who still want
 to write correct eval blocks without 5 lines of boilerplate each time.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/Try-Tiny

Package: libtsan2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8902
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.34), libgcc-s1 (>= 3.4)
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
 ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
 The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libtss2-esys-3.0.2-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 579
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys-3.0.2-0, libtss2-esys0 (<< 3.0.2-1)
Provides: libtss2-esys-3.0.2-0 (= 4.0.1-7.1ubuntu5.1)
Depends: libtss2-tcti-cmd0t64, libtss2-tcti-device0t64, libtss2-tcti-mssim0t64, libtss2-tcti-swtpm0t64, tpm-udev, libc6 (>= 2.34), libssl3t64 (>= 3.0.0), libtss2-mu-4.0.1-0t64 (>= 3.0.1), libtss2-sys1t64 (>= 4.0.1)
Breaks: libtss2-esys-3.0.2-0 (<< 4.0.1-7.1ubuntu5.1), libtss2-esys0 (<< 3.0.2-1)
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TSS esys libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtss2-mu-4.0.1-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 307
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys0 (<< 3.0.1-2), libtss2-mu-4.0.1-0, libtss2-mu0 (<< 4.0.1-4)
Provides: libtss2-mu-4.0.1-0 (= 4.0.1-7.1ubuntu5.1)
Depends: tpm-udev, libc6 (>= 2.14)
Breaks: libtss2-esys0 (<< 3.0.1-2), libtss2-mu-4.0.1-0 (<< 4.0.1-7.1ubuntu5.1)
Conflicts: libtss2-mu0
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TSS mu libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtss2-sys1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 165
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys0 (<< 3.0.1-2), libtss2-sys1
Provides: libtss2-sys1 (= 4.0.1-7.1ubuntu5.1)
Depends: tpm-udev, libc6 (>= 2.14), libtss2-mu-4.0.1-0t64 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2), libtss2-sys1 (<< 4.0.1-7.1ubuntu5.1)
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TSS sys libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtss2-tcti-cmd0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-cmd0
Provides: libtss2-tcti-cmd0 (= 4.0.1-7.1ubuntu5.1)
Depends: tpm-udev, libc6 (>= 2.4), libtss2-mu-4.0.1-0t64 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-cmd0 (<< 4.0.1-7.1ubuntu5.1)
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TCTI cmd libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtss2-tcti-device0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-device0
Provides: libtss2-tcti-device0 (= 4.0.1-7.1ubuntu5.1)
Depends: tpm-udev, libc6 (>= 2.4), libtss2-mu-4.0.1-0t64 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-device0 (<< 4.0.1-7.1ubuntu5.1)
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TCTI device libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtss2-tcti-mssim0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-mssim0
Provides: libtss2-tcti-mssim0 (= 4.0.1-7.1ubuntu5.1)
Depends: tpm-udev, libc6 (>= 2.38), libtss2-mu-4.0.1-0t64 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-mssim0 (<< 4.0.1-7.1ubuntu5.1)
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TCTI mssim libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtss2-tcti-swtpm0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Mathieu Trudel-Lapierre <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tpm2-tss
Version: 4.0.1-7.1ubuntu5.1
Replaces: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-swtpm0
Provides: libtss2-tcti-swtpm0 (= 4.0.1-7.1ubuntu5.1)
Depends: tpm-udev, libc6 (>= 2.38), libtss2-mu-4.0.1-0t64 (>= 3.0.1)
Breaks: libtss2-esys0 (<< 3.0.1-2), libtss2-tcti-swtpm0 (<< 4.0.1-7.1ubuntu5.1)
Description: TPM2 Software stack library - TSS and TCTI libraries
 TPM2.0 TSS (Software Stack) consists of API layers provided to support
 TPM 2.0 chips. It is made out of three layers:
 .
   - Enhanced System API (ESAPI)
   - System API (SAPI), which implements the system layer API;
   - Marshaling/Unmarshaling (MU)
   - TPM Command Transmission Interface (TCTI), which is used by SAPI to
     allow communication with the TAB/RM layer;
 .
 This package contains the TCTI swtpm libraries that client applications
 will link against when they require accessing the TPM.
Homepage: https://github.com/tpm2-software/tpm2-tss

Package: libtwolame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 151
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: twolame
Version: 0.4.0-2build3
Depends: libc6 (>= 2.29)
Description: MPEG Audio Layer 2 encoding library
 TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on tooLAME by
 Mike Cheng, which in turn is based upon the ISO dist10 code and portions of
 LAME.
 .
 TwoLAME does NOT support MPEG Audio Layer 3 (MP3) encoding due to patent
 issues surrounding MP3.
 .
 However, as most MPEG Audio players are able to play layer 2 (MP2) files,
 TwoLAME makes a very good drop-in replacement for LAME and other layer 3
 encoders.
 .
 This package contains the shared library.
Homepage: http://www.twolame.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libubsan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3364
Maintainer: Ubuntu Core developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-4ubuntu2~24.04.1
Depends: gcc-14-base (= 14.2.0-4ubuntu2~24.04.1), libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.1.1)
Description: UBSan -- undefined behaviour sanitizer (runtime)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <[email protected]>

Package: libuchardet0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 207
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: uchardet
Version: 0.0.8-1build1
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 4.1.1)
Description: universal charset detection library - shared library
 uchardet is a C language binding of the original C++ implementation
 of the universal charset detection library by Mozilla.
 .
 uchardet is a encoding detector library, which takes a sequence of
 bytes in an unknown character encoding without any additional
 information, and attempts to determine the encoding of the text.
 .
 This package contains the shared library.
Homepage: https://www.freedesktop.org/wiki/Software/uchardet/
Original-Maintainer: James Cowgill <[email protected]>

Package: libudev1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 316
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 255.4-1ubuntu8.16
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10)
Description: libudev shared library
 This library provides APIs to introspect and enumerate devices on the local
 system.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: libudfread0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libudfread
Version: 1.1.2-1build1
Depends: libc6 (>= 2.14)
Description: UDF reader library
 This library allows reading UDF filesystems, like raw devices and image files.
 .
 The library is created and maintained by VideoLAN Project and is used by
 projects like VLC and Kodi.
Homepage: https://www.videolan.org/developers/libudfread.html
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libunbound8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1077
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: unbound
Version: 1.19.2-1ubuntu3.8
Depends: libc6 (>= 2.38), libevent-2.1-7t64 (>= 2.1.8-stable), libssl3t64 (>= 3.0.0)
Description: library implementing DNS resolution and validation
 libunbound performs and validates DNS lookups; it can be used to convert
 hostnames to IP addresses and back and obtain other information from the
 DNS. Cryptographic validation of results is performed with DNSSEC.
Homepage: https://www.unbound.net/
Original-Maintainer: unbound packagers <[email protected]>

Package: libunibreak5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libunibreak
Version: 5.1-2build1
Depends: libc6 (>= 2.4)
Description: line breaking library for Unicode (shared library)
 libunibreak is an implementation of the Unicode line breaking algorithm
 described at http://www.unicode.org/reports/tr29/tr29-21.html
 .
 This package contains shared library to dynamically link with.
Homepage: https://github.com/adah1972/libunibreak
Original-Maintainer: Debian Qt/KDE Maintainers <[email protected]>

Package: libunistring5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1757
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.1-2build1.1
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libunistring/
Original-Maintainer: Jörg Frings-Fürst <[email protected]>

Package: libunwind8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 187
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libunwind
Version: 1.6.2-3build1.1
Replaces: libgcc1 (<< 1:4.0.0-2)
Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20110809)
Conflicts: libunwind1-dev
Description: library to determine the call-chain of a program - runtime
 The primary goal of this project is to define a portable and efficient C
 programming interface (API) to determine the call-chain of a program.
 The API additionally provides the means to manipulate the preserved
 (callee-saved) state of each call-frame and to resume execution at any
 point in the call-chain (non-local goto). The API supports both local
 (same-process) and remote (across-process) operation. As such, the API
 is useful in a number of applications.
 .
 This package includes the shared libraries
Homepage: http://www.nongnu.org/libunwind
Original-Maintainer: Adrian Bunk <[email protected]>

Package: libupower-glib3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: upower
Version: 1.90.3-1
Depends: libc6 (>= 2.4), libglib2.0-0t64 (>= 2.66)
Recommends: upower
Breaks: gir1.2-upowerglib-1.0 (<< 0.99.18), upower (<< 0.99.18)
Description: abstraction for power management - shared library
 upower provides an interface to enumerate power sources on the system
 and control system-wide power management. Any application can access the
 org.freedesktop.UPower service on the system message bus. Some
 operations (such as suspending the system) are restricted using PolicyKit.
 .
 This package contains the shared library to be used by applications.
Original-Maintainer: Utopia Maintenance Team <[email protected]>
Homepage: https://upower.freedesktop.org/

Package: liburcu8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 341
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: liburcu
Version: 0.14.0-3.1build1
Replaces: liburcu8
Provides: liburcu8 (= 0.14.0-3.1build1)
Depends: libc6 (>= 2.38)
Breaks: liburcu8 (<< 0.14.0-3.1build1)
Description: userspace RCU (read-copy-update) library
 This data synchronization library provides read-side access which scales
 linearly with the number of cores. It does so by allowing multiples copies of
 a given data structure to live at the same time, and by monitoring the data
 structure accesses to detect grace periods after which memory reclamation is
 possible.
Homepage: https://liburcu.org/
Original-Maintainer: Jon Bernard <[email protected]>

Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 250
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 5.27-1
Depends: perl:any
Suggests: libbusiness-isbn-perl, libregexp-ipv6-perl, libwww-perl
Breaks: sqitch (<< 1.3.1-2~)
Description: module to manipulate and access URI strings
 URI is a collection of Perl modules that represent and manipulate Uniform
 Resource Identifier (URI) references as specified in RFC 2396.
 .
 URI objects can be used to access and manipulate the various components
 that make up these strings.  There are also methods to combine URIs in
 various ways.
 .
 The URI class replaces the URI::URL class that used to be distributed with
 libwww-perl. This package also includes an emulation of the old URI::URL
 interface, which implements both the old and the new interface.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/URI

Package: liburing2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: liburing
Version: 2.5-1build1
Depends: libc6 (>= 2.4)
Description: Linux kernel io_uring access library - shared library
 This library provides helpers to setup and teardown io_uring instances,
 and also a simplified interface for applications that do not need (or
 want) to deal with the full kernel side implementation.
 .
 This package contains the shared library.
Homepage: https://github.com/axboe/liburing
Original-Maintainer: Guillem Jover <[email protected]>

Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.27-1
Depends: libc6 (>= 2.38), libudev1 (>= 183)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Original-Maintainer: Aurelien Jarno <[email protected]>
Homepage: http://www.libusb.info

Package: libusbmuxd6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libusbmuxd
Version: 2.0.2-4build3
Depends: libc6 (>= 2.38), libplist-2.0-4 (>= 2.3.0)
Description: USB multiplexor daemon for iPhone and iPod Touch devices - library
 usbmuxd, the USB multiplexor daemon, is in charge of coordinating
 access to iPhone and iPod Touch services over USB. Synchronization and
 management applications for the iPhone and iPod Touch need this daemon
 to communicate with such devices concurrently.
 .
 This package contains the shared library.
Homepage: https://libimobiledevice.org
Original-Maintainer: gtkpod Maintainers <[email protected]>

Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libutempter
Version: 1.2.1-3build1
Depends: libc6 (>= 2.34)
Description: privileged helper for utmp/wtmp updates (runtime)
 The libutempter library provides interface for terminal emulators such as
 screen and xterm to record user sessions to utmp and wtmp files.
 .
 The utempter is a privileged helper used by libutempter library to manipulate
 utmp and wtmp files.
Homepage: https://git.altlinux.org/people/ldv/packages/?p=libutempter.git
Original-Maintainer: Christian Göttsche <[email protected]>

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 84
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Replaces: libuuid1t64
Provides: libuuid1t64 (= 2.39.3-9ubuntu6.5)
Depends: libc6 (>= 2.38)
Recommends: uuid-runtime
Breaks: libuuid1t64 (<< 2.39.3-9ubuntu6.5)
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: libuv1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 264
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libuv1
Version: 1.48.0-1.1build1
Replaces: libuv1
Provides: libuv1 (= 1.48.0-1.1build1)
Depends: libc6 (>= 2.38)
Breaks: libuv1 (<< 1.48.0-1.1build1)
Description: asynchronous event notification library - runtime library
 Libuv is the asynchronous library behind Node.js. Very similar to libevent or
 libev, it provides the main elements for event driven systems: watching and
 waiting for availability in a set of sockets, and some other events like timers
 or asynchronous messages. However, libuv also comes with some other extras
 like:
  * files watchers and asynchronous operations
  * a portable TCP and UDP API, as well as asynchronous DNS resolution
  * processes and threads management, and a portable inter-process
    communications mechanism, with pipes and work queues
  * a plugins mechanism for loading libraries dynamically
  * interface with external libraries that also need to access the I/O.
 .
 This package includes the dynamic library against which you can link
 your program.
Homepage: https://github.com/libuv/libuv
Original-Maintainer: Dominique Dumont <[email protected]>

Package: libva-drm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.20.0-2ubuntu0.1
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.60), libva2 (>= 2.20.0), libva2 (<< 2.20.0.1)
Description: Video Acceleration (VA) API for Linux -- DRM runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the libva-drm library.
Homepage: https://github.com/intel/libva
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libva-x11-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.20.0-2ubuntu0.1
Depends: libc6 (>= 2.33), libdrm2 (>= 2.4.60), libva2 (>= 2.20.0), libva2 (<< 2.20.0.1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.8.7), libxcb-dri3-0, libxcb1, libxext6, libxfixes3
Description: Video Acceleration (VA) API for Linux -- X11 runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the libva-x11 library.
Homepage: https://github.com/intel/libva
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libva2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.20.0-2ubuntu0.1
Provides: libva-driver-abi-1.0, libva-driver-abi-1.17, libva-driver-abi-1.18, libva-driver-abi-1.19, libva-driver-abi-1.20, libva-driver-abi-1.8
Depends: libc6 (>= 2.38)
Recommends: va-driver-all | va-driver
Description: Video Acceleration (VA) API for Linux -- runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the main libva library.
Homepage: https://github.com/intel/libva
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libvbr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: opendkim
Version: 2.11.0~beta2-9build4
Depends: libc6 (>= 2.34)
Description: Vouch By Reference (VBR) library
 The OpenDKIM Project is a community effort to develop and maintain a C library
 for producing DKIM-aware applications and an open source milter for providing
 DomainKeys Identified Mail (DKIM) service.
 .
 This package provides library for implementing RFC 5518 Vouch By Reference
 (VBR), a peer-to-peer domain reputation service protocol based on DKIM signed
 domains.
 .
 Vouch By Reference, or VBR, is a protocol for adding third-party
 certification to email.  Specifically, VBR permits independent third parties
 to certify the owner of a domain name that is associated with received mail.
 VBR may be performed anywhere along the email transit path, by any capable
 receiving module, either within the handling service or by end-user software.
Homepage: http://www.opendkim.org/
Original-Maintainer: David Bürgin <[email protected]>

Package: libvdpau1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvdpau
Version: 1.5-2build1
Depends: libc6 (>= 2.38), libx11-6 (>= 2:1.4.99.1), libxext6
Recommends: vdpau-driver-all | vdpau-driver
Conffiles:
 /etc/vdpau_wrapper.cfg bc89239208609c5d031b74c99a45747d
Description: Video Decode and Presentation API for Unix (libraries)
 VDPAU (Video Decode and Presentation API for Unix) is an open source
 library (libvdpau) and API designed by NVIDIA originally for its GeForce
 8 series and later GPU hardware, targeted at the X Window System on Unix
 operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API
 allows video programs to offload portions of the video decoding process
 and video post-processing to the GPU video-hardware.
 .
 This package contains the VDPAU wrapper and trace libraries.
Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/
Original-Maintainer: Debian NVIDIA Maintainers <[email protected]>

Package: libvidstab1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvidstab
Version: 1.1.0-2build1
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: video stabilization library (shared library)
 Imagine you captured a nice video with your camcorder, compact camera or
 even cell phone while skiing, cycling or whatever sports and the video is
 basically just jiggled.
 .
 Modern cameras come along with hardware stabilisation, however this does
 not work if you have really strong vibrations - rather the contrary -
 sometimes this mechanism starts to oscillate.
 .
 Vid.Stab is your friend in this matter. It is designed to stabilize even
 strongly jiggled clips.
 .
 This package contains the shared library.
Homepage: http://public.hronopik.de/vid.stab/
Original-Maintainer: Keng-Yu Lin <[email protected]>

Package: libvorbis0a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 204
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1build3
Depends: libc6 (>= 2.29), libogg0 (>= 1.1.0)
Description: decoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbis library is the primary Ogg Vorbis library.
Homepage: https://www.xiph.org/vorbis/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libvorbisenc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 698
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1build3
Depends: libc6 (>= 2.4), libvorbis0a (= 1.3.7-1build3)
Description: encoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisenc library provides a convenient API for setting up an encoding
 environment using libvorbis.
Homepage: https://www.xiph.org/vorbis/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libvorbisfile3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1build3
Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.7-1build3)
Description: high-level API for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisfile library provides a convenient high-level API for decoding
 and basic manipulation of all Vorbis-I audio streams.
Homepage: https://www.xiph.org/vorbis/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libvpl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 288
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: onevpl
Version: 2023.3.0-1build1
Depends: libc6 (>= 2.38), libdrm-intel1 (>= 2.4.1), libdrm2 (>= 2.4.60), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), libwayland-client0 (>= 1.20.0)
Description: oneAPI Video Processing Library -- shared library
 The oneAPI Video Processing Library (oneVPL) provides a single video processing
 API for encode, decode, and video processing that works across a wide range of
 accelerators.
 .
 This repository contains the following components of oneVPL:
 .
  - Copies of the oneVPL Specification API header files
  - oneVPL dispatcher
  - Examples demonstrating API usage
  - oneVPL command line tools
 .
 This project is part of the larger oneAPI project.
 .
 This package includes the dispatcher library
Homepage: https://github.com/oneapi-src/oneVPL
Original-Maintainer: Timo Aaltonen <[email protected]>

Package: libvpx-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 4994
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvpx
Version: 1.14.0-1ubuntu2.3
Depends: libvpx9 (= 1.14.0-1ubuntu2.3)
Description: VP8 and VP9 video codec (development files)
 VP8 and VP9 are open video codecs, originally developed by On2 and released
 as open source by Google Inc. They are the successor of the VP3 codec,
 on which the Theora codec was based.
 .
 This package contains the development libraries, header files needed by
 programs that want to compile with libvpx.
Homepage: https://www.webmproject.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libvpx9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3349
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvpx
Version: 1.14.0-1ubuntu2.3
Depends: libc6 (>= 2.34)
Description: VP8 and VP9 video codec (shared library)
 VP8 and VP9 are open video codecs, originally developed by On2 and released
 as open source by Google Inc. They are the successor of the VP3 codec,
 on which the Theora codec was based.
 .
 This package contains the shared libraries.
Homepage: https://www.webmproject.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libvulkan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 530
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: vulkan-loader
Version: 1.3.275.0-1build1
Replaces: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader
Depends: libc6 (>= 2.38)
Recommends: mesa-vulkan-drivers | vulkan-icd
Breaks: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader
Description: Vulkan loader library
 The Loader implements the main VK library. It handles layer management and
 driver management. The loader fully supports multi-gpu operation. As part of
 this, it dispatches API calls to the correct driver, and to the correct
 layers, based on the GPU object selected by the application.
 .
 This package includes the loader library.
Homepage: https://github.com/KhronosGroup/Vulkan-Loader
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libwayland-client0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.22.0-2.1build1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - client library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the client side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libwayland-cursor0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.22.0-2.1build1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libwayland-client0 (>= 1.20.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - cursor library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships a helper library to manage cursors.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libwayland-egl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.22.0-2.1build1
Replaces: libwayland-egl1-mesa (<< 18.0.5-0)
Provides: libwayland-egl1-mesa
Depends: libc6 (>= 2.2.5)
Breaks: libwayland-egl1-mesa (<< 18.0.5-0)
Description: wayland compositor infrastructure - EGL library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the Wayland EGL platform
 of the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libwayland-server0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.22.0-2.1build1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Breaks: weston (<< 1.2.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - server library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the server side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libwebp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1589
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libwebp7 (= 1.3.2-0.4build3), libwebpdemux2 (= 1.3.2-0.4build3), libwebpmux3 (= 1.3.2-0.4build3), libwebpdecoder3 (= 1.3.2-0.4build3), libsharpyuv-dev
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libwebp7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 504
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libc6 (>= 2.34), libsharpyuv0 (>= 1.3.2)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libwebpdecoder3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 268
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libc6 (>= 2.34)
Description: Library for the WebP graphics format (decode only)
 This package provides the decoder functions for the WebP
 graphics format as a shared library.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libwebpdemux2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libc6 (>= 2.14), libwebp7 (>= 1.3.2)
Description: Lossy compression of digital photographic images.
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libc6 (>= 2.29), libwebp7 (>= 1.3.2)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: libwmflite-0.2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 190
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libwmf
Version: 0.2.13-1.1build3
Replaces: libwmf0.2-7 (<< 0.2.12-1)
Depends: libc6 (>= 2.14)
Breaks: libwmf0.2-7 (<< 0.2.12-1)
Description: Windows metafile conversion lite library
 Windows metafile (WMF) is a picture format used by many Windows
 programs, e.g. Microsoft Word.  libwmf is a library for interpreting
 metafile images and either displaying them using X or converting them
 to standard formats such as PNG, JPEG, PS, EPS and SVG(Z)...
 .
 This package contains the lite library.
Homepage: http://wvware.sourceforge.net/libwmf.html
Original-Maintainer: Yangfl <[email protected]>

Package: libwrap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-33
Depends: libc6 (>= 2.33)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: libwww-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 373
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 6.76-1ubuntu0.1
Depends: perl:any, ca-certificates, libencode-locale-perl, libfile-listing-perl, libhtml-parser-perl, libhtml-tagset-perl, libhtml-tree-perl, libhttp-cookies-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, liblwp-mediatypes-perl, liblwp-protocol-https-perl, libnet-http-perl, libtry-tiny-perl, liburi-perl, libwww-robotrules-perl, netbase
Recommends: libdata-dump-perl, libhtml-form-perl, libhtml-format-perl, libhttp-daemon-perl, libmailtools-perl
Suggests: libauthen-ntlm-perl
Description: simple and consistent interface to the world-wide web
 libwww-perl (also known as LWP) is a collection of Perl modules that provide
 a simple and consistent programming interface (API) to the World-Wide Web.
 The main focus of the library is to provide classes and functions that allow
 you to write WWW clients. It also contains general purpose modules, as well
 as a simple HTTP/1.1-compatible server implementation.
Homepage: https://metacpan.org/release/libwww-perl
Original-Maintainer: Debian Perl Group <[email protected]>

Package: libwww-robotrules-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 35
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, liburi-perl
Breaks: libwww-perl (<< 6.00)
Description: database of robots.txt-derived permissions
 WWW::RobotRules parses /robots.txt files as specified in "A Standard for
 Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters
 can use the /robots.txt file to forbid conforming robots from accessing parts
 of their web site.
 .
 The parsed files are kept in a WWW::RobotRules object, and this object
 provides methods to check if access to a given URL is prohibited. The same
 WWW::RobotRules object can be used for one or more parsed /robots.txt files
 on any number of hosts.
Original-Maintainer: Debian Perl Group <[email protected]>
Homepage: https://metacpan.org/release/WWW-RobotRules

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1362
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.7-1build1
Depends: libc6 (>= 2.38), libxcb1 (>= 1.11.1), libx11-data
Breaks: libx11-xcb1 (<< 2:1.7.0-2)
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1342
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.8.7-1build1
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libx11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2479
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.7-1build1
Replaces: x11proto-dev (<< 2019.2)
Depends: libx11-6 (= 2:1.8.7-1build1), libxau-dev, libxdmcp-dev, x11proto-dev (>= 2019.2-1), xtrans-dev, libxcb1-dev
Suggests: libx11-doc
Description: X11 client-side library (development headers)
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 This package contains the development headers for the library found in
 libx11-6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libx11-xcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.7-1build1
Depends: libx11-6 (= 2:1.8.7-1build1)
Description: Xlib/XCB interface library
 libX11-xcb provides functions needed by clients which take advantage of
 Xlib/XCB to mix calls to both Xlib and XCB over the same X connection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 More information about XCB can be found at:
 <URL:https://xcb.freedesktop.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libx264-164
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1860
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: x264
Version: 2:0.164.3108+git31e19f9-1
Depends: libc6 (>= 2.38)
Description: x264 video coding library
 libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC)
 video streams.
 .
 This package contains the libx264 shared library.
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>
Homepage: https://www.videolan.org/developers/x264.html

Package: libx265-199
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16098
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: x265
Version: 3.5-2build1
Depends: libc6 (>= 2.38), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1)
Description: H.265/HEVC video stream encoder (shared library)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This package contains the shared library.
Homepage: http://x265.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libx265-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 21598
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: x265
Version: 3.5-2build1
Depends: libx265-199 (= 3.5-2build1)
Suggests: libx265-doc
Description: H.265/HEVC video stream encoder (development files)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This is the development package which contains headers and libraries for
 libx265.
Homepage: http://x265.org
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libxau-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 51
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1build6
Depends: libxau6 (= 1:1.0.9-1build6), x11proto-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 This package contains the development headers for the library found in libxau6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 33
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1build6
Depends: libc6 (>= 2.33)
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxcb-dri3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, dri3 extension
 This package contains the library files needed to run software using
 libxcb-dri3, the dri3 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-glx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, glx extension
 This package contains the library files needed to run software using
 libxcb-glx, the glx extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-present0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, present extension
 This package contains the library files needed to run software using
 libxcb-present, the present extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-randr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2)
Description: X C Binding, randr extension
 This package contains the library files needed to run software using
 libxcb-randr, the randr extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
 This package contains the library files needed to run software using
 libxcb-render, the render extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-shape0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, shape extension
 This package contains the library files needed to run software using
 libxcb-shape, the shape extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-sync1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.14), libxcb1
Description: X C Binding, sync extension
 This package contains the library files needed to run software using
 libxcb-sync, the sync extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb-xfixes0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, xfixes extension
 This package contains the library files needed to run software using
 libxcb-xfixes, the xfixes extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 196
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libc6 (>= 2.38), libxau6 (>= 1:1.0.9), libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcb1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 677
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1ubuntu2
Depends: libxcb1 (= 1.15-1ubuntu2), libpthread-stubs0-dev, libxau-dev (>= 1:1.0.0-1), libxdmcp-dev (>= 1:1.0.0-1)
Suggests: libxcb-doc
Description: X C Binding, development files
 This package contains the header and library files needed to build software
 using libxcb, the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://xcb.freedesktop.org

Package: libxcomposite-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 47
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcomposite
Version: 1:0.4.5-1build3
Depends: libxcomposite1 (= 1:0.4.5-1build3), libx11-dev, libxfixes-dev, x11proto-dev, libxext-dev
Description: X11 Composite extension library (development headers)
 libXcomposite provides an X Window System client interface to the Composite
 extension to the X protocol.
 .
 The Composite extension allows clients called compositing managers to control
 the final drawing of the screen.  Rendering is done into an off-screen buffer.
 .
 This package contains the development headers for the library found in
 libxcomposite1.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxcomposite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcomposite
Version: 1:0.4.5-1build3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 Composite extension library
 libXcomposite provides an X Window System client interface to the Composite
 extension to the X protocol.
 .
 The Composite extension allows clients called compositing managers to control
 the final drawing of the screen.  Rendering is done into an off-screen buffer.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXcomposite
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxcursor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxcursor
Version: 1:1.2.1-1build1
Depends: libc6 (>= 2.38), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1
Description: X cursor management library
 Xcursor is a simple library designed to help locate and load cursors for the
 X Window System.  Cursors can be loaded from files or memory and can exist in
 several sizes; the library automatically picks the best size.  When using
 images loaded from files, Xcursor prefers to use the Render extension's
 CreateCursor request for rendering cursors.  Where the Render extension is
 not supported, Xcursor maps the cursor image to a standard X cursor and uses
 the core X protocol CreateCursor request.
 .
 Preferred themes for cursors can be installed if desired, via
 xcursor-themes or other cursor-theme or icon-theme packages,
 configured with update-alternatives --config x-cursor-theme.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxdamage-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 27
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxdamage
Version: 1:1.1.6-1build1
Depends: libxdamage1 (= 1:1.1.6-1build1), libx11-dev, libxfixes-dev, x11proto-dev
Description: X11 damaged region extension library (development headers)
 libXdamage provides an X Window System client interface to the DAMAGE
 extension to the X protocol.
 .
 The Damage extension provides for notification of when on-screen regions have
 been 'damaged' (altered).
 .
 This package contains the development headers for the library found in
 libxdamage1.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdamage
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxdamage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxdamage
Version: 1:1.1.6-1build1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 damaged region extension library
 libXdamage provides an X Window System client interface to the DAMAGE
 extension to the X protocol.
 .
 The Damage extension provides for notification of when on-screen regions have
 been 'damaged' (altered).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdamage
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxdmcp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 65
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.3-0ubuntu6
Depends: libxdmcp6 (= 1:1.1.3-0ubuntu6), x11proto-core-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 This package contains the development headers for the library found in
 libxdmcp6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.3-0ubuntu6
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxext-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 306
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxext
Version: 2:1.3.4-1build2
Depends: libxext6 (= 2:1.3.4-1build2), x11proto-dev, libx11-dev
Suggests: libxext-doc
Description: X11 miscellaneous extensions library (development headers)
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 This package contains the development headers for the library found in
 libxext6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 103
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxext
Version: 2:1.3.4-1build2
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxfixes-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 59
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxfixes
Version: 1:6.0.0-2build1
Depends: libxfixes3 (= 1:6.0.0-2build1), libx11-dev, x11proto-dev
Description: X11 miscellaneous 'fixes' extension library (development headers)
 libXfixes provides an X Window System client interface to the 'XFIXES'
 extension to the X protocol.
 .
 It provides support for Region types, and some cursor functions.
 .
 This package contains the development headers for the library found in
 libxfixes3.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXfixes
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxfixes3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxfixes
Version: 1:6.0.0-2build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous 'fixes' extension library
 libXfixes provides an X Window System client interface to the 'XFIXES'
 extension to the X protocol.
 .
 It provides support for Region types, and some cursor functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXfixes
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxi-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 693
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxi
Version: 2:1.8.1-1build1
Depends: libxi6 (= 2:1.8.1-1build1), libx11-dev, libxext-dev, libxfixes-dev, x11proto-dev (>= 2021.5), xorg-sgml-doctools
Description: X11 Input extension library (development headers)
 libXi provides an X Window System client interface to the XINPUT
 extension to the X protocol.
 .
 The Input extension allows setup and configuration of multiple input devices,
 and hotplugging of input devices (to be added and removed on the fly).
 .
 This package contains the development headers for the library found in
 libxi6.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXi
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxi
Version: 2:1.8.1-1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Input extension library
 libXi provides an X Window System client interface to the XINPUT
 extension to the X protocol.
 .
 The Input extension allows setup and configuration of multiple input devices,
 and hotplugging of input devices (to be added and removed on the fly).
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXi
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxinerama1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxinerama
Version: 2:1.1.4-3build1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Xinerama extension library
 libXinerama provides an X Window System client interface to the XINERAMA
 extension to the X protocol.
 .
 The Xinerama (also known as panoramiX) extension allows for multiple screens
 attached to a single display to be treated as belonging together, and to give
 desktop applications a better idea of the monitor layout.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXinerama
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxkbcommon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 309
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxkbcommon
Version: 1.6.0-1build1
Depends: xkb-data, libc6 (>= 2.38)
Description: library interface to the XKB compiler - shared library
 This package provides a library to handle keyboard descriptions, including
 loading them from disk, parsing them and handling their state. It's mainly
 meant for client toolkits, window systems, and other system applications;
 currently that includes Wayland, kmscon, GTK+, Clutter, and more.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://github.com/xkbcommon/libxkbcommon.git
Homepage: https://www.xkbcommon.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxml2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2080
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 2.9.14+dfsg-1.3ubuntu3.7
Depends: libc6 (>= 2.38), libicu74 (>= 74.1-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Conflicts: w3c-dtd-xhtml
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org
Original-Maintainer: Debian XML/SGML Group <[email protected]>

Package: libxml2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3269
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxml2
Version: 2.9.14+dfsg-1.3ubuntu3.7
Depends: libicu-dev, libxml2 (= 2.9.14+dfsg-1.3ubuntu3.7)
Suggests: pkg-config
Description: GNOME XML library - development files
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 Install this package if you wish to develop your own programs using
 the GNOME XML library.
Homepage: http://xmlsoft.org
Original-Maintainer: Debian XML/SGML Group <[email protected]>

Package: libxmlb2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 191
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxmlb
Version: 0.3.18-1
Depends: libc6 (>= 2.14), libglib2.0-0t64 (>= 2.54.0), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.5)
Description: Binary XML library
 The libxmlb library takes XML source, and
 converts it to a structured binary representation with a deduplicated string
 table -- where the strings have the NULs included.
 .
 This allows an application to mmap the binary XML file, do an XPath query and
 return some strings without actually parsing the entire document. This is all
 done using (almost) zero allocations and no actual copying of the binary data.
Original-Maintainer: Debian EFI team <[email protected]>
Homepage: https://github.com/hughsie/libxmlb

Package: libxmlsec1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 483
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.39-5build2
Replaces: libxmlsec1
Provides: libxmlsec1 (= 1.2.39-5build2)
Depends: libc6 (>= 2.14), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25)
Breaks: libxmlsec1 (<< 1.2.39-5build2)
Description: XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides all XML security library functionality
 except for the cryptography engine.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <[email protected]>

Package: libxmlsec1t64-openssl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 310
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: xmlsec1
Version: 1.2.39-5build2
Replaces: libxmlsec1-openssl
Provides: libxmlsec1-openssl (= 1.2.39-5build2)
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), libxmlsec1t64 (>= 1.2.35)
Breaks: libxmlsec1-openssl (<< 1.2.39-5build2)
Description: Openssl engine for the XML security library
 The XML Security Library implements standards related to secure handling
 of XML data.
 .
 This package provides dynamic libraries for use by applications.
 Specifically, it provides the openssl implementation of the XML security
 library cryptography functions.
Homepage: https://www.aleksey.com/xmlsec/
Original-Maintainer: Debian XML/SGML Group <[email protected]>

Package: libxpm-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 268
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.17-1build2
Depends: libxpm4 (= 1:3.5.17-1build2), libx11-dev, x11proto-dev
Description: X11 pixmap library (development headers)
 The X PixMap image format is an extension of the monochrome X BitMap
 format specified in the X protocol, and is commonly used in traditional
 X applications.
 .
 This package contains the development headers for the libxpm4 library.
 Non-developers likely have little use for this package.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.17-1build2
Depends: libc6 (>= 2.38), libx11-6
Description: X11 pixmap library
 The X PixMap image format is an extension of the monochrome X BitMap
 format specified in the X protocol, and is commonly used in traditional
 X applications.
 .
 This package provides runtime support for XPM format.
Homepage: https://www.x.org
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxrandr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxrandr
Version: 2:1.5.2-2build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1
Description: X11 RandR extension library
 libXrandr provides an X Window System client interface to the RandR
 extension to the X protocol.
 .
 The RandR extension allows for run-time configuration of display attributes
 such as resolution, rotation, and reflection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXrandr
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.10-1.1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
 The X Rendering Extension (Render) introduces digital image composition as
 the foundation of a new rendering model within the X Window System.
 Rendering geometric figures is accomplished by client-side tessellation into
 either triangles or trapezoids.  Text is drawn by loading glyphs into the
 server and rendering sets of them.  The Xrender library exposes this
 extension to X clients.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXrender
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxshmfence1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxshmfence
Version: 1.3-1build5
Depends: libc6 (>= 2.27)
Description: X shared memory fences - shared library
 This library provides an interface to shared-memory fences for
 synchronization between the X server and direct-rendering clients.
 .
 This package contains the xshmfence shared library.
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxslt1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 818
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.39-0exp1ubuntu0.24.04.3
Provides: libxslt-dev
Depends: libxml2-dev (>= 2.6.26), libxslt1.1 (= 1.1.39-0exp1ubuntu0.24.04.3)
Description: XSLT 1.0 processing library - development kit
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the development files for libxslt.
Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home
Original-Maintainer: Debian XML/SGML Group <[email protected]>

Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 417
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.39-0exp1ubuntu0.24.04.3
Depends: libc6 (>= 2.38), libgcrypt20 (>= 1.10.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home
Original-Maintainer: Debian XML/SGML Group <[email protected]>

Package: libxss1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxss
Version: 1:1.2.3-1build3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common
Description: X11 Screen Saver extension library
 libXss provides an X Window System client interface to the MIT-SCREEN-SAVER
 extension to the X protocol.
 .
 The Screen Saver extension allows clients behaving as screen savers to
 register themselves with the X server, to better integrate themselves with
 the running session.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXScrnSaver
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxt6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 459
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.2.1-1.2build1
Replaces: libxt6
Provides: libxt6 (= 1:1.2.1-1.2build1)
Depends: libc6 (>= 2.33), libice6 (>= 1:1.0.0), libsm6, libx11-6
Breaks: libxt6 (<< 1:1.2.1-1.2build1)
Description: X11 toolkit intrinsics library
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 103
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.10-3ubuntu2
Depends: libc6 (>= 2.34)
Description: netfilter xtables library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 However, even if a given system may be fully running on native nftables,
 there are other reasons why libxtables might be installed. For one, nftables
 itself uses it to be able to display old rulesets that were created using
 xtables extensions (to help folks migrate). Other third-party software might
 also be linked to this library.
 .
 This library being installed in the system should be harmless in any case.
 .
 This package contains the user-space interface to the Netfilter xtables
 kernel framework.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: libxtst-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 72
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxtst
Version: 2:1.2.3-1.1build1
Replaces: x11proto-record-dev (<< 1.13.99.1), x11proto-xext-dev (<< 7.0.99.3)
Depends: libxtst6 (= 2:1.2.3-1.1build1), libx11-dev, libxext-dev, libxi-dev, x11proto-xext-dev (>= 7.0.99.3), x11proto-record-dev (>= 1.13.99.1)
Description: X11 Record extension library (development headers)
 libXtst provides an X Window System client interface to the Record
 extension to the X protocol.
 .
 The Record extension allows X clients to synthesise input events, which
 is useful for automated testing.
 .
 This package contains the development headers for the library found in
 libxtst6.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXtst
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxtst6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxtst
Version: 2:1.2.3-1.1build1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6, x11-common
Description: X11 Testing -- Record extension library
 libXtst provides an X Window System client interface to the Record
 extension to the X protocol.
 .
 The Record extension allows X clients to synthesise input events, which
 is useful for automated testing.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXtst
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxv
Version: 2:1.0.11-1.1build1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Video extension library
 libXv provides an X Window System client interface to the XVideo
 extension to the X protocol.
 .
 The XVideo extension allows for accelerated drawing of videos.  Hardware
 adaptors are exposed to clients, which may draw in a number of colourspaces,
 including YUV.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXv
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxvidcore4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 673
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: xvidcore
Version: 2:1.3.7-1build1
Depends: libc6 (>= 2.34)
Description: Open source MPEG-4 video codec (library)
 Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4
 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards.
 It is written in C with assembler optimizations for quality and speed
 (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is
 especially optimized towards offline, multi-pass compression for storage and
 archival purposes.
 .
 This package contains the shared library.
Homepage: https://labs.xvid.com/source/
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libxxf86vm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libxxf86vm
Version: 1:1.1.4-1build4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 XFree86 video mode extension library
 libXxf86vm provides an interface to the XFree86-VidModeExtension
 extension, which allows client applications to get and set video mode
 timings in extensive detail.  It is used by the xvidtune program in
 particular.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: libxxhash0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: xxhash
Version: 0.8.2-2build1
Depends: libc6 (>= 2.14)
Description: shared library for xxhash
 xxHash is an Extremely fast Hash algorithm, running at RAM speed limits.
 It successfully completes the SMHasher test suite which evaluates collision,
 dispersion and randomness qualities of hash functions. Code is highly portable,
 and hashes are identical on all platforms (little / big endian).
 .
 This package contains the shared library.
Homepage: https://cyan4973.github.io/xxHash
Original-Maintainer: Josue Ortega <[email protected]>

Package: libyajl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: yajl
Version: 2.1.0-5build1
Depends: libc6 (>= 2.14)
Description: Yet Another JSON Library
 A small, fast library for parsing JavaScript Object Notation (JSON).  It
 supports incremental parsing from a stream and leaves data representation to
 higher level code.
Homepage: https://lloyd.github.io/yajl/
Original-Maintainer: John Stamp <[email protected]>

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.5-1build1
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Homepage: https://github.com/yaml/libyaml
Original-Maintainer: Florian Ernst <[email protected]>

Package: libyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 624
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libyuv
Version: 0.0~git202401110.af6ac82-1
Replaces: libyuv
Provides: libyuv
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libjpeg8 (>= 8c), libstdc++6 (>= 5)
Conflicts: libyuv
Description: Library for YUV scaling (shared library)
 libyuv is an open source project that includes YUV scaling and
 conversion functionality.
 .
 This package provides the shared library.
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>
Homepage: https://chromium.googlesource.com/libyuv/libyuv/

Package: libzimg2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 827
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: zimg
Version: 3.0.5+ds1-1build1
Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: scaling, colorspace, depth conversion library (shared library)
 The "z" library implements the commonly required image processing basics of
 scaling, colorspace conversion, and depth conversion. A simple API enables
 conversion between any supported formats to operate with minimal knowledge
 from the programmer.
 .
 This package constains the shared library.
Homepage: https://github.com/sekrit-twc/zimg
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libzip-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 323
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.7.3-1.1ubuntu2
Depends: libzip4t64 (= 1.7.3-1.1ubuntu2), zlib1g-dev
Description: library for reading, creating, and modifying zip archives (development)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the static libraries and headers for developing
 applications that use the libzip library API.
Homepage: https://libzip.org
Original-Maintainer: Stefan Schörghofer <[email protected]>

Package: libzip4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 139
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.7.3-1.1ubuntu2
Replaces: libzip4
Provides: libzip4 (= 1.7.3-1.1ubuntu2)
Depends: libbz2-1.0, libc6 (>= 2.36), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libzip4 (<< 1.7.3-1.1ubuntu2)
Description: library for reading, creating, and modifying zip archives (runtime)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the files necessary for running applications that
 use the libzip library.
Homepage: https://libzip.org
Original-Maintainer: Stefan Schörghofer <[email protected]>

Package: libzix-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: zix
Version: 0.4.2-2build1
Depends: libc6 (>= 2.34)
Description: library of portability wrappers and data structures (shared library)
 Zix provides a lightweight library of portability wrappers and data
 structures. Components of Zix include bump allocator, B-tree, hash table, and
 binary tree implementations. The wrappers include filesystem and threading
 abstractions.
 .
 This package provides the shared library.
Homepage: https://gitlab.com/drobilla/zix
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: libzmq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 698
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: zeromq3
Version: 4.3.5-1build2
Depends: libbsd0 (>= 0.0), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgssapi-krb5-2 (>= 1.17), libnorm1t64 (>= 1.5r6), libpgm-5.3-0 (>= 5.1.116~dfsg), libsodium23 (>= 1.0.3), libstdc++6 (>= 12)
Description: lightweight messaging kernel (shared library)
 ØMQ is a library which extends the standard socket interfaces with features
 traditionally provided by specialised messaging middleware products.
 .
 ØMQ sockets provide an abstraction of asynchronous message queues, multiple
 messaging patterns, message filtering (subscriptions), seamless access to
 multiple transport protocols and more.
 .
 This package contains the libzmq shared library.
Homepage: https://www.zeromq.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: libzstd-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1237
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.5+dfsg2-2build1.1
Depends: libzstd1 (= 1.5.5+dfsg2-2build1.1)
Description: fast lossless compression algorithm -- development files
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the headers and static library.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: RPM packaging team <[email protected]>

Package: libzstd1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 761
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.5+dfsg2-2build1.1
Depends: libc6 (>= 2.34)
Description: fast lossless compression algorithm
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the shared library.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: RPM packaging team <[email protected]>

Package: libzvbi-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 161
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: zvbi
Version: 0.2.42-2
Replaces: libzvbi-0.1 (<= 0.2.1-3)
Description: Vertical Blanking Interval decoder (VBI) - common files
 The vertical blanking interval (VBI) is an interval in a television signal
 that temporarily suspends transmission of the signal for the electron gun
 to move back up to the first line of the television screen to trace the
 next screen field.
 .
 The vertical blanking interval can be used to carry data, since anything
 sent during the VBI would naturally not be displayed; various test signals,
 closed captioning, and other digital data can be sent during this time
 period. These include information like closed-caption data, Teletext
 (primarily in Europe), and now Intercast and the ATVEC Internet television
 encodings.
 .
 The Zapping VBI library, in short ZVBI, provides functions to capture and
 decode VBI data. It is written in plain ANSI C with few dependencies on
 other tools and libraries, licensed under GPL. Some features:
   * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced
     VBI data from Linux DVB devices;
   * Implements a VBI Proxy to share one VBI device between multiple
     applications;
   * Has a robust and versatile bit slicer which handles a wide range of data
     services;
   * Functions to capture multiple data services at once, such as Closed
     Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS;
   * Level 3.5 Teletext decoder with support for all Teletext character sets,
     graphics, 4096 colors, with built-in page cache including search
     functions;
   * Closed Caption decoder which supports roll-up, pop-up and paint-on style
     caption, color, expanded character set, text attributes and free text
     placement;
   * Renders Teletext and Caption pages, can export to HTML, PNG and other
     formats.
   * Can determine network names;
   * Can find Teletext subtitle and program pages;
   * Functions to extract data transmissions in Teletext streams (currently
     Page Format Clear and Independent Data Line Format A);
   * Can multiplex and demultiplex DVB VBI PES and TS streams.
 .
 This package contains internationalization files.
Original-Maintainer: Ileana Dumitrescu <[email protected]>
Homepage: https://github.com/zapping-vbi/zvbi

Package: libzvbi0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 689
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: zvbi
Version: 0.2.42-2
Replaces: libzvbi-0.1 (<= 0.2.1-3), libzvbi0
Provides: libzvbi0 (= 0.2.42-2)
Depends: libc6 (>= 2.38), libpng16-16t64 (>= 1.6.2), libzvbi-common (= 0.2.42-2)
Breaks: libzvbi0 (<< 0.2.42-2)
Description: Vertical Blanking Interval decoder (VBI) - runtime files
 The vertical blanking interval (VBI) is an interval in a television signal
 that temporarily suspends transmission of the signal for the electron gun
 to move back up to the first line of the television screen to trace the
 next screen field.
 .
 The vertical blanking interval can be used to carry data, since anything
 sent during the VBI would naturally not be displayed; various test signals,
 closed captioning, and other digital data can be sent during this time
 period. These include information like closed-caption data, Teletext
 (primarily in Europe), and now Intercast and the ATVEC Internet television
 encodings.
 .
 The Zapping VBI library, in short ZVBI, provides functions to capture and
 decode VBI data. It is written in plain ANSI C with few dependencies on
 other tools and libraries, licensed under GPL. Some features:
   * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced
     VBI data from Linux DVB devices;
   * Implements a VBI Proxy to share one VBI device between multiple
     applications;
   * Has a robust and versatile bit slicer which handles a wide range of data
     services;
   * Functions to capture multiple data services at once, such as Closed
     Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS;
   * Level 3.5 Teletext decoder with support for all Teletext character sets,
     graphics, 4096 colors, with built-in page cache including search
     functions;
   * Closed Caption decoder which supports roll-up, pop-up and paint-on style
     caption, color, expanded character set, text attributes and free text
     placement;
   * Renders Teletext and Caption pages, can export to HTML, PNG and other
     formats.
   * Can determine network names;
   * Can find Teletext subtitle and program pages;
   * Functions to extract data transmissions in Teletext streams (currently
     Page Format Clear and Independent Data Line Format A);
   * Can multiplex and demultiplex DVB VBI PES and TS streams.
Original-Maintainer: Ileana Dumitrescu <[email protected]>
Homepage: https://github.com/zapping-vbi/zvbi

Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 345
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 4.5ubuntu9+24.04.2
Depends: debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/kernel/postinst.d/xx-update-initrd-links b41c8cb1275704cf344e3e87c84633b2
Description: Linux image base package
 This package contains files and support scripts for all Linux
 images.
Original-Maintainer: Debian Kernel Team <[email protected]>

Package: linux-firmware
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 626006
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Version: 20240318.git3b128b60-0ubuntu2.27
Replaces: atmel-firmware, linux-firmware-snapdragon (<= 1.2-0ubuntu1), linux-restricted-common
Provides: atmel-firmware
Recommends: firmware-sof-signed
Breaks: amd64-microcode (<= 3.20220411.1ubuntu1), initramfs-tools (<< 0.142ubuntu8~), linux-firmware-raspi2 (<= 1.20190819-0ubuntu2), linux-firmware-snapdragon (<= 1.2-0ubuntu1)
Conflicts: atmel-firmware
Description: Firmware for Linux kernel drivers
 This package provides firmware used by Linux kernel drivers.
Original-Maintainer: Ubuntu Kernel Team <[email protected]>

Package: linux-image-6.8.0-100-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14705
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-100.100
Config-Version: 6.8.0-100.100
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-100-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-100-generic, linux-modules-extra-6.8.0-100-generic
Conflicts: linux-image-unsigned-6.8.0-100-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-100.100)

Package: linux-image-6.8.0-101-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14705
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-101.101
Config-Version: 6.8.0-101.101
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-101-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-101-generic, linux-modules-extra-6.8.0-101-generic
Conflicts: linux-image-unsigned-6.8.0-101-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-101.101)

Package: linux-image-6.8.0-106-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14709
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-106.106
Config-Version: 6.8.0-106.106
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-106-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-106-generic, linux-modules-extra-6.8.0-106-generic
Conflicts: linux-image-unsigned-6.8.0-106-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-106.106)

Package: linux-image-6.8.0-107-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14717
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-107.107
Config-Version: 6.8.0-107.107
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-107-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-107-generic, linux-modules-extra-6.8.0-107-generic
Conflicts: linux-image-unsigned-6.8.0-107-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-107.107)

Package: linux-image-6.8.0-110-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14717
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-110.110
Config-Version: 6.8.0-110.110
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-110-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-110-generic, linux-modules-extra-6.8.0-110-generic
Conflicts: linux-image-unsigned-6.8.0-110-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-110.110)

Package: linux-image-6.8.0-111-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14721
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-111.111
Config-Version: 6.8.0-111.111
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-111-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-111-generic, linux-modules-extra-6.8.0-111-generic
Conflicts: linux-image-unsigned-6.8.0-111-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-111.111)

Package: linux-image-6.8.0-117-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14709
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-117.117
Config-Version: 6.8.0-117.117
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-117-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-117-generic, linux-modules-extra-6.8.0-117-generic
Conflicts: linux-image-unsigned-6.8.0-117-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-117.117)

Package: linux-image-6.8.0-124-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 14713
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-124.124
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-124-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-124-generic, linux-modules-extra-6.8.0-124-generic
Conflicts: linux-image-unsigned-6.8.0-124-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-124.124)

Package: linux-image-6.8.0-78-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 14693
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-78.78
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-78-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-78-generic, linux-modules-extra-6.8.0-78-generic
Conflicts: linux-image-unsigned-6.8.0-78-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-78.78)

Package: linux-image-6.8.0-79-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14689
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-79.79
Config-Version: 6.8.0-79.79
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-79-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-79-generic, linux-modules-extra-6.8.0-79-generic
Conflicts: linux-image-unsigned-6.8.0-79-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-79.79)

Package: linux-image-6.8.0-83-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14689
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-83.83
Config-Version: 6.8.0-83.83
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-83-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-83-generic, linux-modules-extra-6.8.0-83-generic
Conflicts: linux-image-unsigned-6.8.0-83-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-83.83)

Package: linux-image-6.8.0-84-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14693
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-84.84
Config-Version: 6.8.0-84.84
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-84-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-84-generic, linux-modules-extra-6.8.0-84-generic
Conflicts: linux-image-unsigned-6.8.0-84-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-84.84)

Package: linux-image-6.8.0-85-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14701
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-85.85
Config-Version: 6.8.0-85.85
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-85-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-85-generic, linux-modules-extra-6.8.0-85-generic
Conflicts: linux-image-unsigned-6.8.0-85-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-85.85)

Package: linux-image-6.8.0-86-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14681
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-86.87
Config-Version: 6.8.0-86.87
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-86-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-86-generic, linux-modules-extra-6.8.0-86-generic
Conflicts: linux-image-unsigned-6.8.0-86-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-86.87)

Package: linux-image-6.8.0-87-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14681
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-87.88
Config-Version: 6.8.0-87.88
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-87-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-87-generic, linux-modules-extra-6.8.0-87-generic
Conflicts: linux-image-unsigned-6.8.0-87-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-87.88)

Package: linux-image-6.8.0-88-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14689
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-88.89
Config-Version: 6.8.0-88.89
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-88-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-88-generic, linux-modules-extra-6.8.0-88-generic
Conflicts: linux-image-unsigned-6.8.0-88-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-88.89)

Package: linux-image-6.8.0-90-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14681
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-90.91
Config-Version: 6.8.0-90.91
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-90-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-90-generic, linux-modules-extra-6.8.0-90-generic
Conflicts: linux-image-unsigned-6.8.0-90-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-90.91)

Package: linux-image-6.8.0-94-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 14677
Maintainer: Canonical Kernel Team <[email protected]>
Architecture: amd64
Source: linux-signed
Version: 6.8.0-94.96
Config-Version: 6.8.0-94.96
Provides: fuse-module, ivtv-modules, kvm-api-4, linux-image, redhat-cluster-modules, spl-dkms, spl-modules, v4l2loopback-dkms, v4l2loopback-modules, virtualbox-guest-modules, zfs-dkms, zfs-modules
Depends: kmod, linux-base (>= 4.5ubuntu1~16.04.1), linux-modules-6.8.0-94-generic
Recommends: grub-pc | grub-efi-amd64 | grub-efi-ia32 | grub | lilo, initramfs-tools | linux-initramfs-tool
Suggests: fdutils, linux-tools, linux-headers-6.8.0-94-generic, linux-modules-extra-6.8.0-94-generic
Conflicts: linux-image-unsigned-6.8.0-94-generic
Description: Signed kernel image generic
 A kernel image for generic.  This version of it is signed with
 Canonical's signing key.
Built-Using: linux (= 6.8.0-94.96)

Package: linux-image-extra-virtual
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 18
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux-meta
Version: 6.8.0-124.124
Depends: linux-image-generic (= 6.8.0-124.124)
Description: Extra drivers for Virtual Linux kernel image
 This package will always depend on linux-image-generic.

Package: linux-image-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 18
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux-meta
Version: 6.8.0-124.124
Provides: ivsc-modules (= 0~git202311021215.73a044d9), spl-modules (= 2.2.2-0ubuntu9.4), v4l2loopback-modules (= 0.12.7-2ubuntu5.1), virtualbox-guest-modules (= 6.8.0-124), wireguard-modules (= 1.0.0), zfs-modules (= 2.2.2-0ubuntu9.4)
Depends: linux-image-6.8.0-124-generic, linux-modules-extra-6.8.0-124-generic, linux-firmware, intel-microcode, amd64-microcode
Recommends: thermald
Description: Generic Linux kernel image
 This package will always depend on the latest generic kernel image
 available.

Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 7507
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 6.8.0-124.124
Replaces: linux-kernel-headers
Provides: aufs-dev, linux-kernel-headers
Conflicts: linux-kernel-headers
Description: Linux Kernel Headers for development
 This package provides headers from the Linux kernel.  These headers
 are used by the installed headers for GNU glibc and other system
 libraries. They are NOT meant to be used to build third-party modules for
 your kernel. Use linux-headers-* packages for that.

Package: linux-modules-6.8.0-100-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38424
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-100.100
Config-Version: 6.8.0-100.100
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-101-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38433
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-101.101
Config-Version: 6.8.0-101.101
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-106-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38493
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-106.106
Config-Version: 6.8.0-106.106
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-107-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38477
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-107.107
Config-Version: 6.8.0-107.107
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-110-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38341
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-110.110
Config-Version: 6.8.0-110.110
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-111-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38338
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-111.111
Config-Version: 6.8.0-111.111
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-117-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38369
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-117.117
Config-Version: 6.8.0-117.117
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-124-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 38360
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-124.124
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-78-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 38253
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-78.78
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-79-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38255
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-79.79
Config-Version: 6.8.0-79.79
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-83-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38244
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-83.83
Config-Version: 6.8.0-83.83
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-84-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38284
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-84.84
Config-Version: 6.8.0-84.84
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-85-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38273
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-85.85
Config-Version: 6.8.0-85.85
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-86-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38270
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-86.87
Config-Version: 6.8.0-86.87
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-87-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38288
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-87.88
Config-Version: 6.8.0-87.88
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-88-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38283
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-88.89
Config-Version: 6.8.0-88.89
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-90-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38282
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-90.91
Config-Version: 6.8.0-90.91
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-6.8.0-94-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 38291
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-94.96
Config-Version: 6.8.0-94.96
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 Contains the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-100-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109825
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-100.100
Config-Version: 6.8.0-100.100
Depends: linux-modules-6.8.0-100-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-101-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109779
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-101.101
Config-Version: 6.8.0-101.101
Depends: linux-modules-6.8.0-101-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-106-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109866
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-106.106
Config-Version: 6.8.0-106.106
Depends: linux-modules-6.8.0-106-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-107-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109917
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-107.107
Config-Version: 6.8.0-107.107
Depends: linux-modules-6.8.0-107-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-110-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109730
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-110.110
Config-Version: 6.8.0-110.110
Depends: linux-modules-6.8.0-110-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-111-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109786
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-111.111
Config-Version: 6.8.0-111.111
Depends: linux-modules-6.8.0-111-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-117-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109725
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-117.117
Config-Version: 6.8.0-117.117
Depends: linux-modules-6.8.0-117-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-124-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 109719
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-124.124
Depends: linux-modules-6.8.0-124-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-78-generic
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 109709
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-78.78
Depends: linux-modules-6.8.0-78-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-79-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109703
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-79.79
Config-Version: 6.8.0-79.79
Depends: linux-modules-6.8.0-79-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-83-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109700
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-83.83
Config-Version: 6.8.0-83.83
Depends: linux-modules-6.8.0-83-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-84-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109671
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-84.84
Config-Version: 6.8.0-84.84
Depends: linux-modules-6.8.0-84-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-85-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109661
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-85.85
Config-Version: 6.8.0-85.85
Depends: linux-modules-6.8.0-85-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-86-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109644
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-86.87
Config-Version: 6.8.0-86.87
Depends: linux-modules-6.8.0-86-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-87-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109618
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-87.88
Config-Version: 6.8.0-87.88
Depends: linux-modules-6.8.0-87-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-88-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109647
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-88.89
Config-Version: 6.8.0-88.89
Depends: linux-modules-6.8.0-88-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-90-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109610
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-90.91
Config-Version: 6.8.0-90.91
Depends: linux-modules-6.8.0-90-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-modules-extra-6.8.0-94-generic
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 109604
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-94.96
Config-Version: 6.8.0-94.96
Depends: linux-modules-6.8.0-94-generic, wireless-regdb
Description: Linux kernel extra modules for version 6.8.0 on 64 bit x86 SMP
 This package contains the Linux kernel extra modules for version 6.8.0 on
 64 bit x86 SMP.
 .
 Also includes the corresponding System.map file, the modules built by the
 packager, and scripts that try to ensure that the system is not left in an
 unbootable state after an update.
 .
 Supports Generic processors.
 .
 Geared toward desktop and server systems.
 .
 You likely do not want to install this package directly. Instead, install
 the linux-generic meta-package, which will ensure that upgrades work
 correctly, and that supporting packages are also installed.

Package: linux-tools-6.8.0-78
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 18655
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-78.78
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10), libdw1t64 (>= 0.161), libelf1t64 (>= 0.144), liblzma5 (>= 5.1.1alpha+20120614), libnuma1 (>= 2.0.11), libpci3 (>= 1:3.8.0), libpython3.12t64 (>= 3.12.1), libslang2 (>= 2.2.4), libssl3t64 (>= 3.0.0), libstdc++6 (>= 4.1.1), libtraceevent1 (>= 1:1.3.0), libudev1 (>= 183), libunwind8, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.3), linux-tools-common
Description: Linux kernel version specific tools for version 6.8.0-78
 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 6.8.0-78 on
 64 bit x86.
 You probably want to install linux-tools-6.8.0-78-<flavour>.

Package: linux-tools-6.8.0-78-generic
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 516
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: amd64
Source: linux
Version: 6.8.0-78.78
Depends: linux-tools-6.8.0-78
Description: Linux kernel version specific tools for version 6.8.0-78
 This package provides the architecture dependant parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 6.8.0-78 on
 64 bit x86.

Package: linux-tools-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 867
Maintainer: Ubuntu Kernel Team <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.8.0-124.124
Provides: bpftool
Depends: lsb-release, hwdata
Description: Linux kernel version specific tools for version 6.8.0
 This package provides the architecture independent parts for kernel
 version locked tools (such as perf and x86_energy_perf_policy) for
 version 6.8.0.

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 16712
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: glibc
Version: 2.39-0ubuntu8.7
Depends: libc-bin (>> 2.39), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias e61078721cb3be18f48a8d4530b7201c
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <[email protected]>
Original-Vcs-Browser: https://salsa.debian.org/glibc-team/glibc
Original-Vcs-Git: https://salsa.debian.org/glibc-team/glibc.git

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 884
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.13+dfsg1-4ubuntu3.2
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs 6577ffcffe56502b0e9a79ee8e5bb8c6
 /etc/pam.d/login d10e26d07799aaa674a125e89d525c39
Description: system login tools
 This package provides some required infrastructure for logins and for
 changing effective user or group IDs, including:
  * login, the program that invokes a user shell on a virtual terminal;
  * nologin, a dummy shell for disabled user accounts;
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <[email protected]>

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 145
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.21.0-2build1
Depends: cron | anacron | cron-daemon | systemd-sysv, libacl1 (>= 2.2.23), libc6 (>= 2.38), libpopt0 (>= 1.14), libselinux1 (>= 3.1~)
Suggests: bsd-mailx | mailx
Conffiles:
 /etc/cron.daily/logrotate 31da718265eaaa2fdabcfb2743bda171
 /etc/logrotate.conf 9290a646a62731e8afbdfb022ca8dff9
 /etc/logrotate.d/btmp 55631862595faf6432786dc335eb3f44
 /etc/logrotate.d/wtmp 46cd7ecb1810441bd450987a976f5540
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate
Original-Maintainer: Christian Göttsche <[email protected]>

Package: logsave
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 51
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs
Version: 1.47.0-2.4~exp1ubuntu4.1
Replaces: e2fsprogs (<< 1.45.3-1)
Depends: libc6 (>= 2.34)
Breaks: e2fsprogs (<< 1.45.3-1)
Description: save the output of a command in a log file
 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile.  If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out.  A copy
 of the output will also be written to standard output.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <[email protected]>

Package: lsb-base
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 12
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 11.6
Depends: sysvinit-utils (>= 3.05-4~)
Description: transitional package for Linux Standard Base init script functionality
 This is an empty package; it's needed only because of Provides: not being
 supported in debootstrap.  It can be safely removed.
Original-Maintainer: Debian sysvinit maintainers <[email protected]>
Homepage: https://wiki.linuxfoundation.org/lsb/start

Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 17
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: lsb-release-minimal
Version: 12.0-2
Description: Linux Standard Base version reporting utility (minimal implementation)
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb_release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 .
 This package contains a bare-bones implementation that uses the
 information in /etc/os-release instead of relying on LSB packages.
Original-Maintainer: Gioele Barabucci <[email protected]>
Homepage: https://gioele.io/lsb-release-minimal

Package: lshw
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 974
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 02.19.git.2021.06.19.996aaad9c7-2ubuntu0.24.04.1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Recommends: pci.ids, usb.ids
Description: information about hardware configuration
 A small tool to provide detailed information on the hardware
 configuration of the machine. It can report exact memory
 configuration, firmware version, mainboard configuration, CPU version
 and speed, cache configuration, bus speed, etc. on DMI-capable x86
 systems, on some PowerPC machines (PowerMac G4 is known to work) and AMD64.
 .
 Information can be output in plain text, HTML or XML.
Homepage: https://github.com/lyonel/lshw
Original-Maintainer: Ghe Rivero <[email protected]>

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 475
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.95.0-1build3
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~), libtirpc3t64 (>= 1.0.2)
Description: utility to list open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Homepage: https://github.com/lsof-org/lsof
Original-Maintainer: Andres Salomon <[email protected]>

Package: lto-disabled-list
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 41
Maintainer: Matthias Klose <[email protected]>
Architecture: all
Version: 47
Description: list of packages not to build with LTO
 A list of source packages not to build with link time
 optimization (LTO).
 .
 Entries in this list should have a bug report filed with
 the (user) tag 'lto'.

Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4005
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.03.16-3ubuntu3.2
Depends: libaio1t64 (>= 0.3.93), libblkid1 (>= 2.24.2), libc6 (>= 2.38), libdevmapper-event1.02.1 (>= 2:1.02.74), libedit2 (>= 2.11-20080614-0), libselinux1 (>= 3.1~), libsystemd0 (>= 233), libudev1 (>= 183), dmsetup (>= 2:1.02.185-3ubuntu3.2~), dmeventd (>= 2:1.02.185-3ubuntu3.2~)
Recommends: thin-provisioning-tools
Conffiles:
 /etc/lvm/lvm.conf 4a76bea425627b2b23faf920850753d8
 /etc/lvm/lvmlocal.conf a149b0ec175b15065a7ae82c849e77c9
 /etc/lvm/profile/cache-mq.profile 9df1883c03bac9d3041e75745cb5e0ec
 /etc/lvm/profile/cache-smq.profile d27b7f0947c6ac21944c05e6098b9850
 /etc/lvm/profile/command_profile_template.profile 3bab119bec857c31a53725da2d0a9408
 /etc/lvm/profile/lvmdbusd.profile ffa904d375ce53ebb6befe7d65cf391a
 /etc/lvm/profile/metadata_profile_template.profile bccbaf503cb8f0adb5b4f841f7c1f735
 /etc/lvm/profile/thin-generic.profile f57ede2b5b249024766c51a223e15ed5
 /etc/lvm/profile/thin-performance.profile f4de81439550553043e04f019a48a827
 /etc/lvm/profile/vdo-small.profile da26d10e71e517a6f02ff0d53395e3c9
Description: Linux Logical Volume Manager
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.
Homepage: https://sourceware.org/lvm2/
Original-Maintainer: Debian LVM Team <[email protected]>

Package: lxd-agent-loader
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 25
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 0.7ubuntu0.1
Description: LXD - VM agent loader
 The LXD VM agent enables access to advanced LXD features such as file
 transfer and command spawning inside virtual machines run by LXD.
 .
 This package will automatically load and run the agent when started in
 a LXD VM.
Homepage: https://github.com/canonical/lxd

Package: lxd-installer
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 22
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 4ubuntu0.1
Conflicts: lxd
Description: Wrapper to install lxd snap on demand
 Installing this package in an image instead of the lxd snap allows it to be
 smaller whilst preserving the command line interface of the full server image.

Package: m4
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 624
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.19-4build1
Depends: libc6 (>= 2.38)
Suggests: m4-doc
Description: macro processing language
 GNU `m4' is an implementation of the traditional UNIX macro
 processor.  It is mostly SVR4 compatible, although it has some
 extensions (for example, handling more than 9 positional parameters to
 macros).  `m4' also has builtin functions for including files, running
 shell commands, doing arithmetic, etc.  Autoconf needs GNU `m4' for
 generating `configure' scripts, but not for running them.
Homepage: https://www.gnu.org/software/m4/
Original-Maintainer: Santiago Vila <[email protected]>

Package: mailcap
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 88
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.70+nmu1ubuntu1
Replaces: mime-support (<< 3.65)
Provides: run-mailcap
Depends: perl, media-types
Recommends: bzip2, file, xz-utils
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: Debian's mailcap system, and support programs
 The mailcap system associates media types with programs that can handle them,
 using system and user configuration files.  A file's media type is determined
 by its extension or by running the "file" command if available.
 .
 Other packages register their programs as viewers/editors/composers/etc by
 placing mailcap entry files or FreeDesktop menu entries in predetermined
 directories monitored by this package's dpkg triggers.
 .
 This package provides a "run-mailcap" program to open arbitrary files, and in
 addition the "see", "edit", "compose", and "print" aliases to display, alter,
 create, and print (respectively).
 .
 This package also provides the "debian-view" utility to handle Debian packages
 interactively.
Original-Maintainer: Mime-Support Packagers <[email protected]>

Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 404
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.3-4.1build2
Replaces: make-guile
Depends: libc6 (>= 2.38)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
 GNU Make is a utility which controls the generation of executables
 and other target files of a program from the program's source
 files. It determines automatically which pieces of a large program
 need to be (re)created, and issues the commands to (re)create
 them. Make can be used to organize any task in which targets (files)
 are to be automatically updated based on input files whenever the
 corresponding input is newer --- it is not limited to building
 computer programs. Indeed, Make is a general purpose dependency
 solver.
Homepage: https://www.gnu.org/software/make/
Original-Maintainer: Manoj Srivastava <[email protected]>

Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 2928
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.12.0-4build2
Replaces: man, nlsutils
Provides: man, man-browser
Depends: bsdextrautils | bsdmainutils (<< 12.1.1~), groff-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libgdbm6t64 (>= 1.16), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4)
Suggests: apparmor, groff, less, www-browser
Conflicts: man
Conffiles:
 /etc/apparmor.d/usr.bin.man 4f614d75041882370498f7fe2d43a44b
 /etc/cron.daily/man-db 62423d7fa68568c9c0aefceac182d9ea
 /etc/cron.weekly/man-db eebc5bb3e1dac973301570da3f453334
 /etc/manpath.config 6d70333de0a08c7a71018da458201eb6
Description: tools for reading manual pages
 This package provides the man command, the primary way of examining the
 system help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: https://man-db.gitlab.io/man-db/
Original-Maintainer: Colin Watson <[email protected]>

Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1672
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 6.7-2
Replaces: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2)
Suggests: man-browser
Breaks: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2)
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Beside the intro man page describing the section, a few manual
 pages from sections 1,6 and 8 are also provided.
 .
 The man pages describe syntaxes of several system files.
Original-Maintainer: Dr. Tobias Quathamer <[email protected]>
Homepage: https://www.kernel.org/doc/man-pages/

Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3724
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 6.7-2
Replaces: inn2-dev (<< 2.7.0-1), manpages (<< 6.7-1)
Depends: manpages
Suggests: man-browser
Breaks: inn2-dev (<< 2.7.0-1), manpages (<< 6.7-1)
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
  2 = Linux system calls.
  3 = Library calls (note that a more comprehensive source of information
      may be found in the glibc-doc and glibc-doc-reference packages).
Original-Maintainer: Dr. Tobias Quathamer <[email protected]>
Homepage: https://www.kernel.org/doc/man-pages/

Package: mariadb-client
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 25804
Maintainer: MariaDB Developers <[email protected]>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Replaces: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-client-5.1, mariadb-client-5.2, mariadb-client-5.3, mariadb-client-5.5, mariadb-client-core (<< 1:11.8.6+maria~ubu2404), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-10.7, mariadb-client-core-10.8, mariadb-server (<< 1:11.8.6+maria~ubu2404), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-core (<< 1:11.8.6+maria~ubu2404), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mysql-client (<< 5.0.51), mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core-5.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, mytop, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-client
Provides: default-mysql-client, virtual-mysql-client
Depends: debianutils (>= 1.6), libconfig-inifiles-perl, mariadb-client-core (>= 1:11.8.6+maria~ubu2404), mariadb-common, perl:any, libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libpcre2-posix3 (>= 10.34), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4)
Recommends: libdbd-mariadb-perl | libdbd-mysql-perl, libdbi-perl, libterm-readkey-perl, mariadb-client-compat
Breaks: mariadb-client-core (<< 1:11.8.6+maria~ubu2404), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-10.7, mariadb-client-core-10.8, mariadb-server (<< 1:11.8.6+maria~ubu2404), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-core (<< 1:11.8.6+maria~ubu2404), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-client-5.1, mariadb-client-5.2, mariadb-client-5.3, mariadb-client-5.5, mysql-client (<< 5.0.51), mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core-5.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mytop, virtual-mysql-client
Conffiles:
 /etc/mysql/mariadb.conf.d/50-client.cnf a8028d231dad4d2658bfd8b0db11f85e
 /etc/mysql/mariadb.conf.d/50-mariadb-clients.cnf 4053917ba6f381811d49188c5803bcdf
 /etc/mysql/mariadb.conf.d/60-galera.cnf 655c85e18aeac0f013c8a87c6d182180
Description: MariaDB database client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client binaries and the additional tools
 innotop and mariadb-report (mysqlreport).
Homepage: https://mariadb.org/

Package: mariadb-client-compat
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 59
Maintainer: MariaDB Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Depends: mariadb-client (>= 1:11.8.6+maria~ubu2404)
Conflicts: mariadb-client (<< 11.0.0), mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-client-5.1, mariadb-client-5.2, mariadb-client-5.3, mariadb-client-5.5, mariadb-client-core (<< 11.0.0), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-10.7, mariadb-client-core-10.8, mariadb-client-core-5.1, mariadb-client-core-5.2, mariadb-client-core-5.3, mariadb-client-core-5.5, mariadb-server (<< 11.0.0), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-core (<< 11.0.0), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mysql-client (<< 5.0.51), mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core-5.0, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-server-5.7, mysql-server-core-8.0, percona-server-server, percona-server-server-5.6, percona-xtradb-cluster-server, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Description: MySQL compatibility links to mariadb-client binaries/scripts.
 The package contains links and binaries that are needed by MySQL centric
 tools which also works with MariaDB.
 .
 This package is also useful for users with strong  background in MySQL
 maintenance, but wants to switch to MariaDB
Homepage: https://mariadb.org/

Package: mariadb-client-core
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 10762
Maintainer: MariaDB Developers <[email protected]>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Replaces: mariadb-client (<< 1:11.8.6+maria~ubu2404), mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-client-5.1, mariadb-client-5.2, mariadb-client-5.3, mariadb-client-5.5, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-10.7, mariadb-client-core-10.8, mariadb-client-core-5.1, mariadb-client-core-5.2, mariadb-client-core-5.3, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core (<< 1:11.8.6+maria~ubu2404), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mysql-client (<< 5.0.51), mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-cluster-community-client-plugins, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0, virtual-mysql-client-core
Provides: default-mysql-client-core, virtual-mysql-client-core
Depends: libmariadb3 (>= 10.5.4), mariadb-common (>= 1:11.8.6+maria~ubu2404), libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libgcc-s1 (>= 3.3.1), libncurses6 (>= 6), libssl3t64 (>= 3.0.0), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: mariadb-client (<< 1:11.8.6+maria~ubu2404), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core (<< 1:11.8.6+maria~ubu2404), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mysql-cluster-community-client-plugins, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0
Conflicts: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-client-5.1, mariadb-client-5.2, mariadb-client-5.3, mariadb-client-5.5, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-10.7, mariadb-client-core-10.8, mariadb-client-core-5.1, mariadb-client-core-5.2, mariadb-client-core-5.3, mariadb-client-core-5.5, mysql-client (<< 5.0.51), mysql-client-5.0, mysql-client-5.1, mysql-client-5.5, mysql-client-core-5.1, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, virtual-mysql-client-core
Description: MariaDB database core client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core client files, as used by Akonadi.
Homepage: https://mariadb.org/

Package: mariadb-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 22
Maintainer: MariaDB Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Depends: mysql-common (>= 5.6.25)
Conffiles:
 /etc/mysql/mariadb.cnf f78499dd07dccc3238cc15dd937b87bb
Description: MariaDB database common files (e.g. /etc/mysql/mariadb.conf.d/)
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes configuration files common to all MariaDB programs.
Homepage: https://mariadb.org/

Package: mariadb-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 43093
Maintainer: MariaDB Developers <[email protected]>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Replaces: handlersocket-mysql-5.5, libmariadbclient-dev (<< 5.5.0), libmariadbclient16, mariadb-client (<< 1:11.8.6+maria~ubu2404), mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core-8.0, mysql-server, mysql-server-4.1, mysql-server-5.0, mysql-server-5.1, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Provides: default-mysql-server, virtual-mysql-server
Depends: galera-4 (>= 26.4), gawk, iproute2, libdbi-perl, lsof, mariadb-client (>= 1:11.8.6+maria~ubu2404), mariadb-server-core (>= 1:11.8.6+maria~ubu2404), passwd, perl (>= 5.6), procps, psmisc, rsync, socat, debconf (>= 0.5) | debconf-2.0, perl:any, libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libpam0g (>= 0.99.7.1), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4)
Pre-Depends: adduser (>= 3.40), debconf, mariadb-common (>= 1:11.8.6+maria~ubu2404)
Recommends: libhtml-template-perl, mariadb-server-compat, pv
Suggests: mailx, mariadb-test, netcat-openbsd
Breaks: handlersocket-mysql-5.5, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core-8.0, mysql-server, mysql-server-4.1, mysql-server-5.0, mysql-server-5.1, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, virtual-mysql-server
Conffiles:
 /etc/apparmor.d/usr.sbin.mariadbd dacafa122cb26bc12319782acc6aff47
 /etc/init.d/mariadb 078d29127f932ed4ed86aac3741db7a8
 /etc/logcheck/ignore.d.paranoid/mariadb-server e0e3191cc12a25fdd6f57889a204295d
 /etc/logcheck/ignore.d.server/mariadb-server 4f612f8c23f0463cf34ccbd851009388
 /etc/logcheck/ignore.d.workstation/mariadb-server 4f612f8c23f0463cf34ccbd851009388
 /etc/logrotate.d/mariadb 9694f545cc2483ce09930879b2fb9aa6
 /etc/mysql/debian-start bd839b84cc19c7d170338f9ebf6338bc
 /etc/mysql/mariadb.conf.d/50-server.cnf aa64ccf3859d07a9cbbb73f4d93f4f93
 /etc/mysql/mariadb.conf.d/99-enable-encryption.cnf.preset/enable_encryption.preset 36ff39d347a74cf817be27c09a218e63
 /etc/security/user_map.conf 126cbe3b479937c707031f9576702be9
Description: MariaDB database server binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the server binaries.
Homepage: https://mariadb.org/

Package: mariadb-server-compat
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 27
Maintainer: MariaDB Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Depends: mariadb-server (>= 1:11.8.6+maria~ubu2404)
Conflicts: mariadb-server (<< 11.0.0), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5, mariadb-server-core (<< 11.0.0), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mariadb-server-core-5.1, mariadb-server-core-5.2, mariadb-server-core-5.3, mariadb-server-core-5.5, mysql-server-5.0, mysql-server-core-5.0, mysql-server-core-5.1, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server, percona-server-server-5.6, percona-server-server-5.7, percona-xtradb-cluster-server, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Description: MySQL compatibility links to mariadb-server binaries/scripts.
 The package contains links and binaries that are needed by MySQL centric
 tools which also works with MariaDB.
 .
 This package is also useful for users with strong  background in MySQL
 maintenance, but wants to switch to MariaDB
Homepage: https://mariadb.org/

Package: mariadb-server-core
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 34173
Maintainer: MariaDB Developers <[email protected]>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Replaces: mariadb-client (<< 1:11.8.6+maria~ubu2404), mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-server (<< 1:11.8.6+maria~ubu2404), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-5.1, mariadb-server-core-5.2, mariadb-server-core-5.3, mariadb-server-core-5.5, mysql-client-5.5, mysql-server-5.0, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, mysql-server-core-5.0, mysql-server-core-5.1, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server-core
Provides: default-mysql-server-core, virtual-mysql-server-core
Depends: mariadb-common (>= 1:11.8.6+maria~ubu2404), libaio1t64 (>= 0.3.93), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libgcc-s1 (>= 3.3.1), libpcre2-8-0 (>= 10.22), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libsystemd0 (>= 227), liburing2 (>= 2.3), zlib1g (>= 1:1.2.0)
Breaks: mariadb-client (<< 1:11.8.6+maria~ubu2404), mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-10.7, mariadb-client-10.8, mariadb-server (<< 1:11.8.6+maria~ubu2404), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5, mariadb-server-10.6, mariadb-server-10.7, mariadb-server-10.8, mysql-client-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-10.7, mariadb-server-core-10.8, mariadb-server-core-5.1, mariadb-server-core-5.2, mariadb-server-core-5.3, mariadb-server-core-5.5, mysql-server-5.0, mysql-server-core-5.0, mysql-server-core-5.1, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, virtual-mysql-server-core
Description: MariaDB database core server files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core server files, as used by Akonadi.
Homepage: https://mariadb.org/

Package: mawk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 273
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.4.20240123-1build1
Provides: awk
Depends: libc6 (>= 2.38)
Description: Pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Homepage: https://invisible-island.net/mawk/
Original-Maintainer: Boyuan Yang <[email protected]>

Package: mc
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1555
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3:4.8.30-1ubuntu0.1
Provides: mcedit
Depends: libc6 (>= 2.38), libext2fs2t64 (>= 1.37), libglib2.0-0t64 (>= 2.77.3), libgpm2 (>= 1.20.7), libslang2 (>= 2.2.4), libssh2-1t64 (>= 1.2.8), mc-data (= 3:4.8.30-1ubuntu0.1)
Recommends: mailcap, perl, sensible-utils, unzip
Suggests: arj, bzip2, catdvi | texlive-binaries, dbview, djvulibre-bin, epub-utils, file, genisoimage, gv, imagemagick, libaspell-dev, links | w3m | lynx, odt2txt, poppler-utils, python, python-boto, python-tz, unar, wimtools, xpdf | pdf-viewer, zip
Conffiles:
 /etc/mc/edit.indent.rc 008c6d0205315a87a977c7cd74a1526e
 /etc/mc/filehighlight.ini 3c5cc604307962b4a4e8ccf88ac8ee19
 /etc/mc/mc.default.keymap 5c9bb9fe85971b4647d78a36349a631c
 /etc/mc/mc.emacs.keymap 9a29cb1cf781358dbe6d260fb17cb069
 /etc/mc/mc.ext.ini 007938d4c5927d65c0c0ef9d2cec4278
 /etc/mc/mc.menu 9a075bf4fa6d0868825a9b0d5521a2c4
 /etc/mc/mcedit.menu 8db98bd6c57ab17599bac4a76f61cf4d
 /etc/mc/sfs.ini bc412d55e342e6dd7465df0bbfc53205
Description: Midnight Commander - a powerful file manager
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH
 servers) and files inside archives to be manipulated like real files.
Homepage: https://www.midnight-commander.org
Original-Maintainer: Dmitry Smirnov <[email protected]>

Package: mc-data
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 6278
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: mc
Version: 3:4.8.30-1ubuntu0.1
Replaces: mc (<< 3:4.8.1)
Breaks: mc (<< 3:4.8.1)
Description: Midnight Commander - a powerful file manager -- data files
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH
 servers) and files inside archives to be manipulated like real files.
 .
 This package provides architecture independent files
Homepage: https://www.midnight-commander.org
Original-Maintainer: Dmitry Smirnov <[email protected]>

Package: mdadm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1130
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.3-1ubuntu2.1
Depends: udev, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libudev1 (>= 183)
Recommends: finalrd (>= 3~), kmod
Suggests: default-mta | mail-transport-agent
Conffiles:
 /etc/logcheck/ignore.d.server/mdadm 5782c2dd729cbc507d03d99f8142b4b1
 /etc/logcheck/violations.d/mdadm efd87cec251921ce0642171eae5f3b73
 /etc/modprobe.d/mdadm.conf d3be82c0f275d6c25b04d388baf9e836
Description: tool for managing Linux MD devices (software RAID)
 The mdadm tool is used to create, manage, and monitor Linux MD (software
 RAID) devices.
 .
 This package configures mdadm to by default assemble arrays automatically
 during the system startup process.
Homepage: https://raid.wiki.kernel.org
Original-Maintainer: Daniel Baumann <[email protected]>

Package: media-types
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 93
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 10.1.0
Replaces: mime-support (<< 3.65)
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mime.types e06b55a5d7cb8e9835e1caad087d1636
Description: List of standard media types and their usual file extension
 This package installs the configuration file /etc/mime.types, that lists
 standard media types (originally known as "MIME" types) and their usual file
 extension.  This provides a simple way for programs to have a first guess at a
 file's content.  On standard Debian desktop systems, one will also find more
 sophisticated tools, for instance provided by the "file" and "xdg-utils"
 packages.
 .
 The /etc/mime.types file is compiled by hand using mostly information provided
 by the Internet Assigned Numbers Authority (IANA).
Original-Maintainer: Mime-Support Packagers <[email protected]>

Package: mesa-libgallium
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42454
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Depends: libc6 (>= 2.38), libdrm-amdgpu1 (>= 2.4.125-1), libdrm-intel1 (>= 2.4.125-1), libdrm2 (>= 2.4.125-1), libelf1t64 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libllvm20, libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libx11-xcb1 (>= 2:1.8.7), libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: shared infrastructure for Mesa drivers
 This package contains libgallium, a private library shared between
 multiple Mesa drivers. This library is an implementation detail of Mesa
 and should not be used directly by user code.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: mesa-va-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Replaces: vdpau-va-driver (<< 0.7.4-5)
Provides: va-driver
Depends: mesa-libgallium (= 25.2.8-0ubuntu0.24.04.1)
Breaks: vdpau-va-driver (<< 0.7.4-5)
Enhances: libva2
Description: Mesa VA-API video acceleration drivers
 These libraries provide the Video Acceleration API (VA-API) for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VA-API for some gallium drivers.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: mesa-vdpau-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Provides: vdpau-driver
Depends: libvdpau1
Enhances: libvdpau1
Description: Mesa VDPAU video acceleration drivers
 These libraries provide the Video Decode and Presentation API for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VDPAU for some gallium drivers.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: mesa-vulkan-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96234
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.2.8-0ubuntu0.24.04.1
Provides: vulkan-icd
Depends: libvulkan1, libc6 (>= 2.38), libdrm-amdgpu1 (>= 2.4.125-1), libdrm2 (>= 2.4.125-1), libelf1t64 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 4.2), libllvm20, libstdc++6 (>= 13.1), libwayland-client0 (>= 1.20.0), libx11-xcb1 (>= 2:1.8.7), libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.13), libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: Mesa Vulkan graphics drivers
 Vulkan is a low-overhead 3D graphics and compute API. This package
 includes Vulkan drivers provided by the Mesa project.
Homepage: https://mesa3d.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: mlock
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 36
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: uw-imap
Version: 8:2007f~dfsg-7build3
Depends: libc6 (>= 2.34)
Description: mailbox locking program
 IMAP (Internet Message Access Protocol) is a method of accessing
 electronic messages kept on a (possibly shared) mail server.
 .
 The UW (University of Washington) IMAP toolkit provides the c-client
 mail-handling library supporting various network transport methods,
 file system storage formats, and authentication and authorization
 methods.
 .
 This package contains a program to lock mailbox files to avoid
 corruption.
Homepage: http://www.washington.edu/imap/
Original-Maintainer: Magnus Holmgren <[email protected]>

Package: modsecurity-crs
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 857
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.3.5-2
Suggests: lua, geoip-database-contrib, ruby, python, libapache2-mod-security2 (>= 2.9.6)
Conffiles:
 /etc/modsecurity/crs/REQUEST-900-EXCLUSION-RULES-BEFORE-CRS.conf 4b67467790078e8dd1b08e2dda04df6d
 /etc/modsecurity/crs/RESPONSE-999-EXCLUSION-RULES-AFTER-CRS.conf 0a699333ae9257e3a2ff8ed6bde8312f
 /etc/modsecurity/crs/crs-setup.conf 99305d14fbd636cd86e734876f28dbc8
Description: OWASP ModSecurity Core Rule Set
 modsecurity provides critical protections against attacks across most every
 web architecture. CRS is based on generic rules which focus on attack payload
 identification in order to provide protection from zero day and unknown
 vulnerabilities often found in web applications, which are in most cases
 custom coded.
 .
 Core Rules use the following techniques: HTTP request validation, HTTP
 protocol anomalies, Global constraints, HTTP Usage policy, Malicious client
 software detection, Generic Attack Detection (SQL injection, Cross Site
 Scripting, OS Command Injection, ColdFusion, PHP and ASP injection, etc.),
 Trojans & Backdoors Detection, Error Detection, XML Protection, Search Engine
 Monitoring.
Original-Maintainer: Ervin Hegedus <[email protected]>
Homepage: https://coreruleset.org

Package: motd-news-config
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 49
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: base-files
Version: 13ubuntu10.4
Replaces: base-files (<< 11ubuntu11)
Breaks: base-files (<< 11ubuntu11)
Conffiles:
 /etc/default/motd-news c08a329a603b640095da5ffe4e73491c
Description: Configuration for motd-news shipped in base-files
 This package contains the configuration read by the motd-news script
 shipped in the base-files package.
 .
 Install this package if you want motd-news to be enabled.
Original-Maintainer: Santiago Vila <[email protected]>

Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 348
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.38), libmount1 (>= 2.39.1), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.33)
Suggests: nfs-common
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: mtr-tiny
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 153
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: mtr
Version: 0.95-1.1ubuntu0.1
Replaces: mtr
Depends: libc6 (>= 2.38), libjansson4 (>= 2.14), libncurses6 (>= 6), libtinfo6 (>= 6)
Breaks: mtr, suidmanager (<< 0.50)
Description: Full screen ncurses traceroute tool
 mtr combines the functionality of the 'traceroute' and 'ping' programs
 in a single network diagnostic tool.
 .
 As mtr starts, it investigates the network connection between the host
 mtr runs on and a user-specified destination host.  After it
 determines the address of each network hop between the machines,
 it sends a sequence of ICMP ECHO requests to each one to determine the
 quality of the link to each machine.  As it does this, it prints
 running statistics about each machine.
 .
 mtr-tiny is compiled without support for X and conserves disk space.
Homepage: https://www.bitwizard.nl/mtr/
Original-Maintainer: Robert Woodcock <[email protected]>

Package: multipath-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1147
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 0.9.4-5ubuntu8.1
Depends: kpartx (>= 0.9.4-5ubuntu8.1), lsb-base, sg3-utils-udev, udev, libaio1t64 (>= 0.3.93), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.110), libedit2 (>= 2.11-20080614-0), libsystemd0, libudev1 (>= 183), liburcu8t64 (>= 0.13.0)
Suggests: multipath-tools-boot
Conffiles:
 /etc/multipath.conf a14f69c91f2ba59a279ac6018d23d28b
Description: maintain multipath block device access
 These tools are in charge of maintaining the disk multipath device maps and
 react to path and map events.
 .
 If you install this package you may have to change the way you address block
 devices. See README.Debian for details.
Homepage: http://christophe.varoqui.free.fr/
Original-Maintainer: Debian DM Multipath Team <[email protected]>

Package: mysql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 18
Maintainer: MariaDB Developers <[email protected]>
Architecture: all
Source: mariadb
Version: 1:11.8.6+maria~ubu2404
Description: MariaDB client common configuration files package (e.g. /etc/mysql/my.cnf)
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes files needed by all versions of the client library
 (e.g. /etc/mysql/my.cnf).
Homepage: https://mariadb.org/

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 836
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 7.2-2ubuntu0.2
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: hunspell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
 /etc/nanorc be076483dde4364946fcf3d1ea5dce26
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, GNU nano also implements many features missing in Pico, including:
  - undo/redo
  - line numbering
  - syntax coloring
  - soft-wrapping of overlong lines
  - selecting text by holding Shift
  - interactive search and replace (with regular expression support)
  - a go-to line (and column) command
  - support for multiple file buffers
  - auto-indentation
  - tab completion of filenames and search terms
  - toggling features while running
  - and full internationalization support
Homepage: https://www.nano-editor.org/
Original-Maintainer: Jordi Mallach <[email protected]>

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 384
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Replaces: ncurses-term (<< 6.4+20230603)
Provides: ncurses-runtime
Breaks: cryptsetup-initramfs (<< 2:2.6.1), ncurses-term (<< 6.4+20230625), neovim (<< 0.6.0), vim-common (<< 2:9.0.1000-2)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 647
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.4+20230603)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: ncurses-term
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 4341
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.4+20240113-1ubuntu2
Replaces: alacritty (<< 0.3.4~), foot-terminfo (<< 1.15.1-2), jfbterm (<< 0.4.7-10), kon2 (<< 0.3.9b-21), libiterm1 (<< 0.5-9), ncurses-base (<< 6.4+20230625), tn5250 (<< 0.17.4-3)
Provides: foot-terminfo (= 6.4+20240113-1ubuntu2)
Depends: ncurses-base (= 6.4+20240113-1ubuntu2)
Breaks: foot-terminfo (<< 1.15.1-2), vim-common (<< 2:9.0.1000-2)
Description: additional terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains all of the numerous terminal definitions not found in
 the ncurses-base package.
Homepage: https://invisible-island.net/ncurses/
Original-Maintainer: Ncurses Maintainers <[email protected]>

Package: needrestart
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 508
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 3.6-7ubuntu4.5
Depends: perl:any, dpkg (>= 1.16.0), gettext-base, libintl-perl, libproc-processtable-perl, libsort-naturally-perl, libmodule-scandeps-perl, libterm-readkey-perl, libmodule-find-perl, xz-utils
Recommends: libpam-systemd | sysvinit-core, systemd | libimvirt-perl
Suggests: needrestart-session | libnotify-bin, iucode-tool
Enhances: intel-microcode
Conffiles:
 /etc/apt/apt.conf.d/99needrestart 32e74032e5bc62f33db01f93dc47f940
 /etc/dpkg/dpkg.cfg.d/needrestart 53f557552f8e6f1c8512d71eb89b7638
 /etc/needrestart/conf.d/README.needrestart a1ef1575bfa695c11492ff7457e5c93e
 /etc/needrestart/hook.d/10-dpkg 5d8524fcfb3e1c5e7dc7ea290c9a57a1
 /etc/needrestart/hook.d/20-rpm 7c10aff0e6b6b265224c3d35562a4d15
 /etc/needrestart/hook.d/90-none a895a2a42d68279c8ca3a9fa451aad15
 /etc/needrestart/iucode.sh 041adce8d8a8956a60b84ba74a208005
 /etc/needrestart/needrestart.conf 3721bf85f5b78970318b17176cd6d35d
 /etc/needrestart/notify.conf 1e3d19b4157f3d5af960b65cb368b5ba
 /etc/needrestart/notify.d/200-write 740aa3371d12e0e1eb43f5412fbc571b
 /etc/needrestart/notify.d/400-notify-send 6aab95df506829edb0a73eff91ed5f15
 /etc/needrestart/notify.d/600-mail 8f22d751880e2163fa6b378746fa7bc9
 /etc/needrestart/notify.d/README.needrestart ca287f2c1d0b1f4937c72564b28551b2
 /etc/needrestart/restart.d/README.needrestart 5b5904ab8d65eaae3644a8d97b1584bb
 /etc/needrestart/restart.d/dbus.service cb8ca893f19fecd6dd8a0e7134fdf2b3
 /etc/needrestart/restart.d/systemd-manager b22b648806843de869331c587f5138c0
 /etc/needrestart/restart.d/sysv-init 57d64c59621664a915f6a8e9b672c815
Description: check which daemons need to be restarted after library upgrades
 needrestart checks which daemons need to be restarted after library upgrades.
 It is inspired by checkrestart from the debian-goodies package.
 .
 Features:
  - supports (but does not require) systemd
  - binary blacklisting (i.e. display managers)
  - tries to detect required restarts of interpreter based daemons
    (supports Java, Perl, Python, Ruby)
  - tries to detect required restarts of containers (docker, LXC)
  - tries to detect pending kernel upgrades
  - tries to detect pending microcode upgrades for Intel CPUs
  - could be used as nagios check_command
  - fully integrated into apt/dpkg using hooks
Homepage: https://github.com/liske/needrestart
Original-Maintainer: Patrick Matthäi <[email protected]>

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 792
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.10-0.1ubuntu4.4
Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/
Original-Maintainer: net-tools Team <[email protected]>

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 36
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 6.4
Replaces: ebtables (<< 2.0.11-2)
Breaks: ebtables (<< 2.0.11-2)
Conffiles:
 /etc/ethertypes cd7fa874d85f7587e2ed11174d58cf83
 /etc/protocols 0c247591a720f534fe543401bd4844d6
 /etc/rpc 2d7748cd0feba2e43ee52d4d7f834188
 /etc/services 3975f0d8c4e1ecb25f035edfb1ba27ac
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
 .
 In particular, it supplies common name-to-number mappings in /etc/services,
 /etc/rpc, /etc/protocols and /etc/ethertypes.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: netcat-openbsd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 106
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.226-1ubuntu2
Provides: netcat
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.38)
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network connections
 using TCP or UDP protocol. It is designed to be a reliable "back-end" tool
 that can be used directly or easily driven by other programs and scripts. At
 the same time it is a feature-rich network debugging and exploration tool,
 since it can create almost any kind of connection you would need and has
 several interesting built-in capabilities.
 .
 This package contains the OpenBSD rewrite of netcat, including support for
 IPv6, proxies, and Unix sockets.
Original-Maintainer: Guilhem Moulin <[email protected]>

Package: netpbm
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 8516
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: netpbm-free
Version: 2:11.05.02-1.1build1
Provides: pbmwbmp, pnmtopng
Depends: libnetpbm11t64 (= 2:11.05.02-1.1build1), libc6 (>= 2.38), libjpeg8 (>= 8c), libpng16-16t64 (>= 1.6.2), libtiff6 (>= 4.0.3), libx11-6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Recommends: ghostscript
Description: Graphics conversion tools between image formats
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
Homepage: https://netpbm.sourceforge.net/
Original-Maintainer: Debian PhotoTools Maintainers <[email protected]>

Package: netplan-generator
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 291
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: netplan.io
Version: 1.1.2-8ubuntu1~24.04.2
Replaces: netplan.io (<< 0.106.1-8~)
Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnetplan1 (= 1.1.2-8ubuntu1~24.04.2), systemd (>= 248~)
Suggests: network-manager | wpasupplicant, openvswitch-switch, iw
Breaks: netplan.io (<< 0.106.1-8~)
Description: Declarative network configuration for various backends at boot
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package provides a systemd-generator to configure various networking
 daemons at boot time.
Homepage: https://netplan.io/
Original-Maintainer: Debian Networking Team <[email protected]>

Package: netplan.io
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 342
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.1.2-8ubuntu1~24.04.2
Depends: python3:any, libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnetplan1 (= 1.1.2-8ubuntu1~24.04.2), libsystemd0 (>= 243), ethtool, iproute2, netplan-generator, python3-netplan, python3-yaml, systemd (>= 248~), udev
Recommends: python3-rich
Suggests: systemd-resolved
Description: Declarative network configuration for various backends at runtime
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package provides a runtime CLI to control the Netplan backends,
 e.g. to re-generate configuration or apply changes.
Homepage: https://netplan.io/
Original-Maintainer: Debian Networking Team <[email protected]>

Package: networkd-dispatcher
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 68
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 2.2.4-1
Depends: dbus, gir1.2-glib-2.0, python3-dbus, python3-gi, python3:any
Suggests: iw | wireless-tools
Conffiles:
 /etc/default/networkd-dispatcher 30d74108d00da7497f70395c32658a41
Description: Dispatcher service for systemd-networkd connection status changes
 Networkd-dispatcher is a dispatcher daemon for systemd-networkd
 connection status changes. It is similar to NetworkManager-dispatcher,
 but is much more limited in the types of events it supports due to the
 limited nature of systemd-networkd.
Original-Maintainer: Julian Andres Klode <[email protected]>
Homepage: https://gitlab.com/craftyguy/networkd-dispatcher

Package: nftables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 181
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.0.9-1ubuntu0.1
Depends: libnftables1 (= 1.0.9-1ubuntu0.1), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0)
Recommends: netbase
Suggests: firewalld
Conffiles:
 /etc/nftables.conf 4d4241fcd44b9a69b74f69d571f35a20
Description: Program to control packet filtering rules by Netfilter project
 This software provides an in-kernel packet classification framework that is
 based on a network-specific Virtual Machine (VM) and the nft userspace
 command line tool. The nftables framework reuses the existing Netfilter
 subsystems such as the existing hook infrastructure, the connection tracking
 system, NAT, userspace queueing and logging subsystem.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
Homepage: https://www.netfilter.org/
Original-Maintainer: Debian Netfilter Packaging Team <[email protected]>

Package: nginx-modsecurity
Status: install ok installed
Maintainer: Your Name <[email protected]>
Architecture: amd64
Version: 1.28.0-1
Depends: libc6, zlib1g, libpcre3, libxml2, libcurl4-openssl-dev, libjansson4, libpcre2-8-0
Conflicts: nginx
Description: NGINX with ModSecurity and ModSecurity NGINX connector

Package: node-jquery
Status: install ok installed
Priority: optional
Section: javascript
Installed-Size: 1391
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.6.1+dfsg+~3.5.14-1
Provides: node-types-jquery (= 3.5.14)
Recommends: libjs-sizzle (>= 2.3.5)
Breaks: node-typescript-types (<< 20201105-1~)
Description: NodeJS wrapper for jQuery
 jQuery is a fast, concise, JavaScript Library that simplifies how you
 traverse HTML documents, handle events, perform animations, and add Ajax
 interactions to your web pages. jQuery is designed to change the way
 that you write JavaScript.
 .
 This package contains the NodeJS module.
Original-Maintainer: Debian Javascript Maintainers <[email protected]>
Homepage: https://jquery.com/

Package: numactl
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 142
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.0.18-1ubuntu0.24.04.1
Depends: libc6 (>= 2.38), libnuma1 (>= 2.0.15)
Description: NUMA scheduling and memory placement tool
 numactl runs processes with a specific NUMA (Non-Uniform Memory
 Architecture) scheduling or memory placement policy.  In addition it
 can set persistent policy for shared memory segments or files.
Homepage: https://github.com/numactl/numactl
Original-Maintainer: Ian Wienand <[email protected]>

Package: nvme-cli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1688
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.8-1ubuntu0.1
Depends: uuid-runtime, libc6 (>= 2.38), libjson-c5 (>= 0.15), libnvme1t64 (>= 1.8)
Recommends: pci.ids
Conffiles:
 /etc/nvme/discovery.conf b50753441ce41b1c6096c1904903d59b
Description: NVMe management tool
 NVM Express (NVMe) is a interface specification for accessing non-volatile
 storage media, typically modern solid state drives (SSDs) through PCI Express
 (PCIe).
 .
 The nvme-cli tool provides management functions for these devices.
Homepage: https://github.com/linux-nvme/nvme-cli
Original-Maintainer: Daniel Baumann <[email protected]>

Package: ocl-icd-libopencl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: ocl-icd
Version: 2.3.2-1build1
Replaces: amd-app, libopencl1, nvidia-libopencl1-dev
Provides: libopencl-1.1-1, libopencl-1.2-1, libopencl-2.0-1, libopencl-2.1-1, libopencl-2.2-1, libopencl-3.0-1, libopencl1
Depends: libc6 (>= 2.34)
Suggests: opencl-icd
Conflicts: amd-app, libopencl1, nvidia-libopencl1-dev
Description: Generic OpenCL ICD Loader
 OpenCL (Open Computing Language) is a multivendor open standard for
 general-purpose parallel programming of heterogeneous systems that include
 CPUs, GPUs and other processors.
 .
 This package contains an installable client driver loader (ICD Loader)
 library that can be used to load any (free or non-free) installable client
 driver (ICD) for OpenCL. It acts as a demultiplexer so several ICD can
 be installed and used together.
Homepage: https://github.com/OCL-dev/ocl-icd
Original-Maintainer: Debian OpenCL Maintainers <[email protected]>

Package: open-iscsi
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1172
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.1.9-3ubuntu5.4
Depends: libopeniscsiusr (>= 2.1.9), udev, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.51), libc6 (>= 2.38), libisns0t64, libkmod2 (>= 5~), libmount1 (>= 2.24.2), libssl3t64 (>= 3.0.0), libsystemd0
Pre-Depends: debconf | debconf-2.0
Recommends: finalrd (>= 3), busybox-initramfs
Conffiles:
 /etc/default/open-iscsi 5744c65409cbdea2bcf5b99dbff89e96
 /etc/init.d/iscsid 5caf8e540bc524549b0da933b0ff81af
 /etc/init.d/open-iscsi 398d426da67e67934f89f81b8dcdccfc
 /etc/iscsi/iscsid.conf a2ff203d041936d10d30b1aa7cc4b08c
Description: iSCSI initiator tools
 The Open-iSCSI project is a high-performance, transport independent,
 multi-platform implementation of RFC3720 iSCSI.
 .
 Open-iSCSI is partitioned into user and kernel parts.
 .
 The kernel portion of Open-iSCSI is a from-scratch code
 licensed under GPL. The kernel part implements iSCSI data path
 (that is, iSCSI Read and iSCSI Write), and consists of three
 loadable modules: scsi_transport_iscsi.ko, libiscsi.ko and iscsi_tcp.ko.
 .
 User space contains the entire control plane: configuration
 manager, iSCSI Discovery, Login and Logout processing,
 connection-level error processing, Nop-In and Nop-Out handling,
 and (in the future:) Text processing, iSNS, SLP, Radius, etc.
 .
 The user space Open-iSCSI consists of a daemon process called
 iscsid, and a management utility iscsiadm.
 .
 This package includes a daemon, iscsid, and a management utility,
 iscsiadm.
Homepage: https://www.open-iscsi.com/
Original-Maintainer: Debian iSCSI Maintainers <[email protected]>

Package: open-vm-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3014
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2:13.0.0-2~ubuntu0.24.04.1
Replaces: open-vm-tools-sdmp (<< 2:12.1.0-2~)
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.3), libfuse3-3 (>= 3.2.3), libgcc-s1 (>= 3.3), libglib2.0-0t64 (>= 2.32.0), libmspack0t64 (>= 0.4), libssl3t64 (>= 3.0.0), libtirpc3t64 (>= 1.0.2), libudev1 (>= 183), libxml2 (>= 2.7.4), libxmlsec1t64 (>= 1.2.31), libxmlsec1t64-openssl (>= 1.2.31), pciutils, iproute2, lsb-release
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ethtool, zerofree, fuse3
Suggests: open-vm-tools-desktop, cloud-init, open-vm-tools-containerinfo, open-vm-tools-salt-minion
Breaks: open-vm-tools-sdmp (<< 2:12.1.0-2~)
Conffiles:
 /etc/init.d/open-vm-tools aeead08272288e4dfbaaf30d0c250726
 /etc/pam.d/vmtoolsd c8d3eb12e396c1824018eea75e5f9d56
 /etc/vmware-tools/poweroff-vm-default b4317ef6f9e0fccc5dbde432eacfd2b7
 /etc/vmware-tools/poweron-vm-default b4317ef6f9e0fccc5dbde432eacfd2b7
 /etc/vmware-tools/resume-vm-default b4317ef6f9e0fccc5dbde432eacfd2b7
 /etc/vmware-tools/scripts/vmware/network 30e30959a28106bced339c25fd1db392
 /etc/vmware-tools/statechange.subr 9ebfc4a9aa22fe49491ad4ac47d4d22c
 /etc/vmware-tools/suspend-vm-default b4317ef6f9e0fccc5dbde432eacfd2b7
 /etc/vmware-tools/tools.conf 76d7075ddb1a4266cb7e43f3a50181b7
 /etc/vmware-tools/tools.conf.example fa5e0ddb164314c2409288623771f260
 /etc/vmware-tools/vgauth.conf 08a49e9affbd864b51b8b77251accd89
 /etc/vmware-tools/vgauth/schemas/XMLSchema-hasFacetAndProperty.xsd 9308e8b04cbf7d2748a287ace40878ea
 /etc/vmware-tools/vgauth/schemas/XMLSchema-instance.xsd e1059f0307358c02766193e5e24c107b
 /etc/vmware-tools/vgauth/schemas/XMLSchema.dtd 86eafc21ca4ab293b7515e453c2b5dfe
 /etc/vmware-tools/vgauth/schemas/XMLSchema.xsd 54f86ef1a7a41930ba250151f143069b
 /etc/vmware-tools/vgauth/schemas/catalog.xml de4f8846e6e571af9feddd834b33a9be
 /etc/vmware-tools/vgauth/schemas/datatypes.dtd c61228050bb7c1c28a7f659f86a6e6c9
 /etc/vmware-tools/vgauth/schemas/saml-schema-assertion-2.0.xsd a6dc9abcc0cb7bd4e53c51642f46ffaa
 /etc/vmware-tools/vgauth/schemas/xenc-schema.xsd 4e7be0e2cae08227fd9ddb261c1e4e93
 /etc/vmware-tools/vgauth/schemas/xml.xsd d4314590e7e7aaf6bcd508be0fd1c614
 /etc/vmware-tools/vgauth/schemas/xmldsig-core-schema.xsd dff329f34df298d952d2e800a097c431
Description: Open VMware Tools for virtual machines hosted on VMware (CLI)
 The Open Virtual Machine Tools (open-vm-tools) project is an open source
 implementation of VMware Tools. It is a suite of virtualization utilities and
 drivers to improve the functionality, user experience and administration of
 VMware virtual machines.
 .
 This package contains only the core user-space programs and libraries.
Homepage: https://github.com/vmware/open-vm-tools
Original-Maintainer: Bernd Zeimetz <[email protected]>

Package: openbsd-inetd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 81
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 0.20221205-3build4
Provides: inet-superserver
Depends: libbsd0 (>= 0.6.0), libc6 (>= 2.38), libevent-2.1-7t64 (>= 2.1.8-stable), libsystemd0, libtirpc3t64 (>= 1.0.2), libwrap0 (>= 7.6-4~), update-inetd, tcpd
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/openbsd-inetd 19e49bf9d1c65cbcd1708d01ea5e07f2
Description: OpenBSD Internet Superserver
 The inetd server is a network daemon program that specializes in managing
 incoming network connections. Its configuration file tells it what
 program needs to be run when an incoming connection is received. Any
 service port may be configured for either of the tcp or udp protocols.
 .
 This is a port of the OpenBSD daemon with some debian-specific features.
 This package supports IPv6, built-in libwrap access control, binding to
 specific addresses, UNIX domain sockets and socket buffers tuning.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: opendkim
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 443
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.11.0~beta2-9build4
Depends: libopendkim11 (= 2.11.0~beta2-9build4), libc6 (>= 2.38), libdb5.3t64, libldap2 (>= 2.6.2), liblua5.3-0, libmemcached11t64 (>= 1.1.4), libmilter1.0.1 (>= 8.14.1), libopendbx1 (>= 1.4.6), librbl1 (>= 2.7.2), libssl3t64 (>= 3.0.0), libunbound8 (>= 1.8.0), libvbr2 (>= 2.7.2), adduser, dns-root-data
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: opendkim-tools
Conffiles:
 /etc/default/opendkim d04976c1685bce5450f217303b7edd16
 /etc/dkimkeys/README.PrivateKeys 2c549002dea448b1b26e9865cb32aec2
 /etc/init.d/opendkim d56132ac1519ee503a48683d7eb8f57a
 /etc/mail/m4/opendkim.m4 52b6f8ac75d31d74d7ae158192f7918d
 /etc/opendkim.conf 5ad260d06704f44102594fa2b71d2681
Description: DomainKeys Identified Mail (DKIM) signing and verifying milter
 The OpenDKIM Project is a community effort to develop and maintain a C library
 for producing DKIM-aware applications and an open source milter for providing
 DomainKeys Identified Mail (DKIM) service.
 .
 DKIM provides a way for senders to confirm their identity when sending email
 by adding a cryptographic signature to the headers of the message.
 .
 This package contains the OpenDKIM mail filter (Milter) for plugging into
 Milter-aware MTAs. It implements both signing and verification.
Homepage: http://www.opendkim.org/
Original-Maintainer: David Bürgin <[email protected]>

Package: opendkim-tools
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 362
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: opendkim
Version: 2.11.0~beta2-9build4
Replaces: opendkim (<< 2.5.2+dfsg-2~)
Depends: libc6 (>= 2.38), libdb5.3t64, libldap2 (>= 2.6.2), liblua5.3-0, libmemcached11t64 (>= 1.1.4), libopendbx1 (>= 1.4.6), libopendkim11 (>= 2.11.0~alpha), librbl1 (>= 2.7.2), libssl3t64 (>= 3.0.0), libunbound8 (>= 1.8.0), libvbr2 (>= 2.7.2), perl:any
Breaks: opendkim (<< 2.5.2+dfsg-2~)
Description: utilities for administering the OpenDKIM milter
 The OpenDKIM Project is a community effort to develop and maintain a C library
 for producing DKIM-aware applications and an open source milter for providing
 DomainKeys Identified Mail (DKIM) service.
 .
 This package contains command line tools for the OpenDKIM mail filter
 (Milter).  The following tools are included:
   - opendkim-genkey
   - opendkim-genzone
   - opendkim-atpszone
   - opendkim-testkey
   - opendkim-testmsg
   - opendkim-spam
   - opendkim-stats
   - opendkim-gengraphs
   - opendkim-genstats
   - opendkim-importstats
   - opendkim-expire
Homepage: http://www.opendkim.org/
Original-Maintainer: David Bürgin <[email protected]>

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 3537
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:9.6p1-3ubuntu13.16
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: ssh-client
Depends: adduser, passwd, libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.13), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Breaks: openssh-sk-helper
Conflicts: sftp
Conffiles:
 /etc/ssh/ssh_config d11fe67b3cd9180e1c0e888c5e5b93f6
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: https://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <[email protected]>

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2097
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:9.6p1-3ubuntu13.16
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser, libpam-modules, libpam-runtime, lsb-base, openssh-client (= 1:9.6p1-3ubuntu13.16), openssh-sftp-server, procps, ucf, debconf (>= 0.5) | debconf-2.0, libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.13), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth, ssh-import-id
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ssh/moduli 366395e79244c54223455e5f83dafba3
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: https://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <[email protected]>

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 101
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:9.6p1-3ubuntu13.16
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:9.6p1-3ubuntu13.16), libc6 (>= 2.38)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: https://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <[email protected]>

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1885
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0.13-0ubuntu3.9
Depends: libc6 (>= 2.34), libssl3t64 (>= 3.0.9)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf 953fe829df1b6f2b1b39c7742ab6d0b8
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/
Original-Maintainer: Debian OpenSSL Team <[email protected]>

Package: overlayroot
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 63
Maintainer: Scott Moser <[email protected]>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.49~24.04.1
Depends: cryptsetup, cryptsetup-bin, initramfs-tools
Suggests: haveged
Conffiles:
 /etc/overlayroot.conf 40086f3ab7223af23f79225c60b4d47d
 /etc/update-motd.d/97-overlayroot 51a409ec9a8608f9c5fa3f6605c78dd9
Description: use an overlayfs on top of a read-only root filesystem
 This package adds functionality to an initramfs built by initramfs-tools.
 When installed and configured, the initramfs will mount an overlayfs
 filesystem on top of a read-only root volume.
 .
 The changes can be written to a in-memory temporary filesystem, a
 filesystem on an existing block device, or a dmcrypt encrypted block
 device.
Homepage: http://launchpad.net/cloud-initramfs-tools

Package: packagekit
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1556
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.2.8-2ubuntu1.5
Depends: libglib2.0-bin, polkitd, init-system-helpers (>= 1.52), libappstream5 (>= 1.0.0), libapt-pkg6.0t64 (>= 1.9.2), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libglib2.0-0t64 (>= 2.79.0), libgstreamer1.0-0 (>= 1.0.0), libpackagekit-glib2-18 (>= 1.2.4), libpolkit-gobject-1-0 (>= 0.99), libsqlite3-0 (>= 3.5.9), libstdc++6 (>= 13.1), libsystemd0 (>= 214)
Recommends: appstream, packagekit-tools, systemd
Breaks: plymouth (<< 0.9.5)
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.PackageKit.conf newconffile remove-on-upgrade
 /etc/PackageKit/PackageKit.conf 71da11578968301072133d233e91cd1e
 /etc/PackageKit/Vendor.conf ea3d03c3310b5470d0273659815c312d
 /etc/apt/apt.conf.d/20packagekit edd8462c9bfc2c453caa7d8650af0487
Description: Provides a package management service
 PackageKit allows performing simple software management tasks over a DBus
 interface e.g. refreshing the cache, updating, installing and removing
 software packages or searching for multimedia codecs and file handlers.
 .
 The work is done by backends which make use of the package manager shipped by
 the corresponding distribution. PackageKit is not meant to replace
 advanced tools like Synaptic.
 .
 Its main benefits are:
  - Unified developer and user interface on many distributions
  - Fine-grained permission control via PolicyKit
  - On-demand installation of missing system components
Homepage: https://www.freedesktop.org/software/PackageKit/
Original-Maintainer: Matthias Klumpp <[email protected]>

Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 130
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6-4build1
Depends: libc6 (>= 2.38), libparted2t64 (= 3.6-4build1), libreadline8t64 (>= 6.0), libtinfo6 (>= 6), libuuid1 (>= 2.16)
Suggests: parted-doc
Conflicts: parted-doc (<< 3.5-2~)
Description: disk partition manipulator
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the binary and manual page. Further
 documentation is available in parted-doc.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
 partitioning formats, as well as a "loop" (raw disk) type which
 allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
 Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
 file systems. Parted also has the ability to create and modify file
 systems of some of these types, but using it to perform file system
 operations is now deprecated.
 .
 The nature of this software means that any bugs could cause massive
 data loss. While there are no such bugs known at the moment, they
 could exist, so please back up all important files before running
 it, and do so at your own risk.
Homepage: https://www.gnu.org/software/parted
Original-Maintainer: Parted Maintainer Team <[email protected]>

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2419
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.13+dfsg1-4ubuntu3.2
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.32), libpam-modules
Recommends: sensible-utils
Conffiles:
 /etc/default/useradd e03965d134c26725cbc51a57969da6c9
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow
Original-Maintainer: Shadow package maintainers <[email protected]>

Package: pastebinit
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 140
Maintainer: Thomas Ward <[email protected]>
Architecture: all
Version: 1.6.2-1
Depends: python3, python3-distro
Description: command-line pastebin client
 pastebinit is a command-line tool to send data to a "pastebin", a web site
 which allows its users to upload snippets of text for public viewing.
Homepage: https://github.com/pastebinit/pastebinit

Package: patch
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 218
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.6-7build3
Depends: libc6 (>= 2.38)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.
Homepage: https://savannah.gnu.org/projects/patch/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: pci.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1424
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.0~2024.03.31-1ubuntu0.1
Replaces: pciutils (<< 1:3.6.2-4~)
Breaks: pciutils (<< 1:3.6.2-4~)
Description: PCI ID Repository
 This package contains the pci.ids file, a public repository of all known
 ID's used in PCI devices: ID's of vendors, devices, subsystems and device
 classes. It is used in various programs to display full human-readable
 names instead of cryptic numeric codes.
Homepage: https://pci-ids.ucw.cz/
Original-Maintainer: Guillem Jover <[email protected]>

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 182
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.10.0-2build1
Depends: libc6 (>= 2.34), libkmod2 (>= 5~), libpci3 (= 1:3.10.0-2build1)
Suggests: bzip2, wget | curl | lynx
Description: PCI utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: https://mj.ucw.cz/sw/pciutils/
Original-Maintainer: Guillem Jover <[email protected]>

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 672
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Version: 5.38.2-3.2ubuntu0.2
Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~)
Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 2.40), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.36), libcompress-raw-bzip2-perl (= 2.204.001), libcompress-raw-zlib-perl (= 2.204.001), libcompress-zlib-perl (= 2.204), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.140), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.19), libexperimental-perl (= 0.031), libextutils-cbuilder-perl (= 0.280238), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.8800), libhttp-tiny-perl (= 0.086), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.204), libio-compress-bzip2-perl (= 2.204), libio-compress-perl (= 2.204), libio-compress-zlib-perl (= 2.204), libio-zlib-perl (= 1.14), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 1.999837), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20231129), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000037), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.43), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libtest-harness-perl (= 3.44), libtest-simple-perl (= 1.302194), libtest-tester-perl (= 1.302194), libtest-use-ok-perl (= 1.302194), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.36), libthreads-shared-perl (= 1.68), libtime-hires-perl (= 1.9775), libtime-local-perl (= 1.3000), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9929), libversion-requirements-perl, podlators-perl (= 5.01)
Depends: perl-base (= 5.38.2-3.2ubuntu0.2), perl-modules-5.38 (>= 5.38.2-3.2ubuntu0.2), libperl5.38t64 (= 5.38.2-3.2ubuntu0.2)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl
Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.38.2-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <[email protected]>

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7913
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: perl
Version: 5.38.2-3.2ubuntu0.2
Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.036), libxsloader-perl (<< 0.32), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.41), libscalar-list-utils-perl (= 1:1.63), libsocket-perl (= 2.036), libxsloader-perl (= 0.32), perlapi-5.38.2
Pre-Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), dpkg (>= 1.17.17)
Suggests: perl, sensible-utils
Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 4.4.0-7~), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), duck (<< 0.14.1), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.8800), libfile-temp-perl (<< 0.2311), libgnupg-interface-perl (<< 1.02-4), libio-socket-ip-perl (<< 0.41), liblexical-failure-perl (<< 0.001000), libmp3-tag-perl (<< 1.13-1.2), libnumber-format-perl (<< 1.76), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.036), libxsloader-perl (<< 0.32), mailagent (<< 1:3.1-81-2), perl (<< 5.38.2~), perl-modules (<< 5.38.2~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.38"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <[email protected]>

Package: perl-modules-5.38
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 19159
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.38.2-3.2ubuntu0.2
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.36), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.031), libextutils-cbuilder-perl (<< 0.280238), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.8800), libhttp-tiny-perl (<< 0.086), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.14), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999837), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20231129), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302194), libtest-tester-perl (<< 1.302194), libtest-use-ok-perl (<< 1.302194), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 5.01)
Provides: perl-modules
Depends: perl-base (>= 5.38.2-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.38.2-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.36), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.031), libextutils-cbuilder-perl (<< 0.280238), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.8800), libhttp-tiny-perl (<< 0.086), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.14), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999837), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20231129), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302194), libtest-tester-perl (<< 1.302194), libtest-use-ok-perl (<< 1.302194), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), maildirsync (<< 1.2-2.1), perl (<< 5.38.2~), podlators-perl (<< 5.01)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.38' directly, they
 should use `perl' (which depends on `perl-modules-5.38') instead.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <[email protected]>

Package: perl-openssl-defaults
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 7build3
Provides: dh-sequence-perl-openssl, perl-openssl-abi-3
Depends: libc6 (>= 2.34), libssl3t64 (>= 3.0.0)
Suggests: debhelper
Description: version compatibility baseline for Perl OpenSSL packages
 A subset of Perl XS module packages expose the OpenSSL binary interface
 to Perl code. This can lead to incompatibilities if these packages are
 linked against different versions of OpenSSL.
 .
 This package provides a virtual package "perl-openssl-abi-x" that
 corresponds to the libssl-dev package SONAME it was built against.
 The packages that need to stay compatible with each other can depend
 on this.
 .
 Tools are also provided for generating this dependency with minimum
 hassle. See the instructions in README.Debian.
Original-Maintainer: Debian Perl Group <[email protected]>

Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 89
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: pinentry
Version: 1.2.1-3ubuntu5
Provides: pinentry
Depends: libassuan0 (>= 2.1.0), libc6 (>= 2.38), libgpg-error0 (>= 1.16), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
 This package contains a program that allows for secure entry of PINs or
 pass phrases.  That means it tries to take care that the entered
 information is not swapped to disk or temporarily stored anywhere.
 This functionality is particularly useful for entering pass phrases
 when using encryption software such as GnuPG or e-mail clients using
 the same.  It uses an open protocol and is therefore not tied to
 particular software.
 .
 The program contained in this package implements a PIN entry dialog
 using the curses tool kit, meaning that it is useful for users
 working in text mode without the X Window System.  There are sibling
 packages that implement PIN entry dialogs that use an X tool kit.  If
 you install any of the graphical packages then this package is not
 necessary because the sibling packages automatically fall back to
 text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/
Original-Maintainer: Debian GnuPG Maintainers <[email protected]>

Package: pkgconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 65
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Version: 1.8.1-2build1
Replaces: pkg-config (<< 1.8)
Provides: pkg-config (= 1.8.1-2build1)
Depends: pkgconf-bin
Breaks: pkg-config (<< 1.8)
Conffiles:
 /etc/dpkg/dpkg.cfg.d/pkgconf-hook-config newconffile remove-on-upgrade
Description: manage compile and link flags for libraries
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
Homepage: http://pkgconf.org/
Original-Maintainer: Andrej Shadura <[email protected]>

Package: pkgconf-bin
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 81
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: pkgconf
Version: 1.8.1-2build1
Replaces: pkg-config (<< 1.8), pkgconf (<< 1.8.0-2~)
Depends: libc6 (>= 2.34), libpkgconf3 (>= 1.8.0)
Breaks: pkgconf (<< 1.8.0-2~)
Description: manage compile and link flags for libraries (binaries)
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 This package contains the pkgconf binary and related files.
Homepage: http://pkgconf.org/
Original-Maintainer: Andrej Shadura <[email protected]>

Package: plymouth
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 892
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 24.004.60-1ubuntu7.1
Replaces: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Depends: init-system-helpers (>= 1.18), sysvinit-utils (>= 3.05-4), systemd (>= 232-8~) | elogind, udev (>= 232-8~), libc6 (>= 2.38), libdrm2 (>= 2.4.47), libplymouth5 (>= 23.360.11)
Recommends: plymouth-theme-ubuntu-text | plymouth-theme
Suggests: desktop-base, plymouth-themes
Breaks: plymouth-drm (<< 0.9.0-6~), plymouth-themes (<< 0.9.0-8~)
Conflicts: console-common
Conffiles:
 /etc/init.d/plymouth 707674e3b5b8fa048271dfe2490a0a09
 /etc/init.d/plymouth-log 83b6676117e0e9b3f952e0fc625892ac
 /etc/logrotate.d/bootlog 0f1e42d11052c238718996029ffb809b
Description: boot animation, logger and I/O multiplexer
 Plymouth provides a boot-time I/O multiplexing framework - the most obvious
 use for which is to provide an attractive graphical animation in place of
 the text messages that normally get shown during boot. (The messages are
 instead redirected to a logfile for later viewing.) However, in event-driven
 boot systems Plymouth can also usefully handle user interaction such as
 password prompts for encrypted file systems.
 .
 This package provides the basic framework, enabling a text-mode animation.
Homepage: https://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: plymouth-theme-ubuntu-text
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 53
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: plymouth
Version: 24.004.60-1ubuntu7.1
Provides: plymouth-theme
Depends: libc6 (>= 2.38), libplymouth5 (>= 0.9.2), plymouth (= 24.004.60-1ubuntu7.1), lsb-release
Description: boot animation, logger and I/O multiplexer - ubuntu text theme
 Plymouth provides a boot-time I/O multiplexing framework - the most obvious
 use for which is to provide an attractive graphical animation in place of
 the text messages that normally get shown during boot. (The messages are
 instead redirected to a logfile for later viewing.) However, in event-driven
 boot systems Plymouth can also usefully handle user interaction such as
 password prompts for encrypted file systems.
 .
 This package contains the default ubuntu-text text theme used when no
 support for a graphical theme is found on your system.
Homepage: https://www.freedesktop.org/wiki/Software/Plymouth
Original-Maintainer: Laurent Bigonville <[email protected]>

Package: pocketsphinx-en-us
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 36991
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: pocketsphinx
Version: 0.8.0+real5prealpha+1-15ubuntu5
Description: Speech recognition tool - US English language model
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the default US English language model for
 PocketSphinx.
Homepage: http://cmusphinx.sourceforge.net/
Original-Maintainer: Debian Accessibility Team <[email protected]>

Package: polkitd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 528
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 124-2ubuntu1.24.04.3
Replaces: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~)
Depends: adduser | systemd-sysusers, default-dbus-system-bus | dbus-system-bus, default-logind | logind, xml-core (>= 0.14), libc6 (>= 2.38), libduktape207 (>= 2.0.3), libexpat1 (>= 2.0.1), libglib2.0-0t64 (>= 2.79.0), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 124-2ubuntu1.24.04.3), libpolkit-gobject-1-0 (= 124-2ubuntu1.24.04.3), libsystemd0 (>= 253)
Suggests: polkitd-pkla (>= 121+compat0.1)
Breaks: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~)
Description: framework for managing administrative policies and privileges
 polkit is an application-level toolkit for defining and handling the policy
 that allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 It is a framework for centralizing the decision making process with respect to
 granting access to privileged operations for unprivileged (desktop)
 applications.
 .
 In a typical use of polkit, an unprivileged application such as gnome-disks
 sends requests via D-Bus or other inter-process communication mechanisms
 to a privileged system service such as udisks, which asks polkitd for
 permission to process those requests. This allows the application to carry
 out privileged tasks without making use of setuid, which avoids several
 common sources of security vulnerabilities.
 .
 This package provides the polkitd D-Bus service and supporting programs.
 The pkexec program is not included, and can be found in the pkexec package.
Homepage: https://github.com/polkit-org/polkit/
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: pollinate
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 43
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 4.33-3.1ubuntu1.3
Depends: curl, ca-certificates, adduser, xxd | vim-common
Conffiles:
 /etc/default/pollinate df4792dac89695df7d48f1672462490b
Description: seed the pseudo random number generator
 This client will connect to one or more Pollen (entropy-as-a-service)
 servers over an (optionally) encrypted connection and retrieve a random
 seed over HTTP or HTTPS.
 This is particularly useful at the first boot of cloud images and in
 virtual machines, to seed a system's random number generator at
 genesis, and is intended to supplement the /etc/init.d/urandom init script.
 It can be used on physical machines, as well, to supplement the seeding
 of the pseudo random number generator.
Homepage: http://launchpad.net/pollinate
Original-Maintainer: Thorsten Alteholz <[email protected]>

Package: poppler-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 13086
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.4.12-1
Pre-Depends: dpkg (>= 1.15.6~)
Suggests: poppler-utils, ghostscript, fonts-japanese-mincho | fonts-ipafont-mincho, fonts-japanese-gothic | fonts-ipafont-gothic, fonts-arphic-ukai, fonts-arphic-uming, fonts-nanum (>= 20131007~)
Enhances: ghostscript
Conffiles:
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-cns1.conf d3a491137506a332ab747c571e5bee33
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-gb1.conf 5ec7d7edc178ef73b1f6ac21a3cdc8a0
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan1.conf 9502944d3a420a2763a36517679460f4
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan2.conf 00d6b53125e159d61e2fd0a5056b4b4c
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-korea1.conf 76ba5a8a08376075902594b9ecd902ed
Description: encoding data for the poppler PDF rendering library
 This package provides the CMap tables required to display PDF documents
 containing CJK characters with libpoppler. They were previously provided
 by the packages cmap-adobe-{cns1,gb1,japan1,japan2,korea1} and
 gs-cjk-resource.
 .
 Users who want to view or create PDF files in Chinese, Japanese, or
 Korean without embedded fonts will need this package.
Original-Maintainer: Hideki Yamane <[email protected]>
Homepage: https://poppler.freedesktop.org/

Package: postfix
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 4097
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.8.6-1ubuntu0.1
Replaces: mail-transport-agent
Provides: default-mta, mail-transport-agent
Depends: adduser (>= 3.48), cpio, dpkg (>= 1.8.3), e2fsprogs, netbase, ssl-cert, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libdb5.3t64, libicu74 (>= 74.1-1~), libnsl2 (>= 1.0), libsasl2-2 (>= 2.1.28+dfsg1), libssl3t64 (>= 3.0.0)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ca-certificates, python3
Suggests: libsasl2-modules | dovecot-common, mail-reader, postfix-cdb, postfix-doc, postfix-ldap, postfix-lmdb, postfix-mta-sts-resolver, postfix-mysql, postfix-pcre, postfix-pgsql, postfix-sqlite, procmail, resolvconf, sasl2-bin | dovecot-common, ufw
Conflicts: mail-transport-agent, smail
Conffiles:
 /etc/init.d/postfix 394590f409167c291ab25309361d48eb
 /etc/insserv.conf.d/postfix 7fe2d086ff4822fc9fe13adab1090dce
 /etc/network/if-down.d/postfix a72bb9cc8c2ecff9802f5d580ad9ce0a
 /etc/network/if-up.d/postfix 5bcf5310518ead318871689424129b24
 /etc/postfix/post-install a4d8cfa6319c13a5b4f0b42227f16547
 /etc/postfix/postfix-files 1d704c9613552a2ba1003af7958db130
 /etc/postfix/postfix-script 7b9cd16a8d181baeceb948e7a29be949
 /etc/ppp/ip-down.d/postfix a72bb9cc8c2ecff9802f5d580ad9ce0a
 /etc/ppp/ip-up.d/postfix 5bcf5310518ead318871689424129b24
 /etc/resolvconf/update-libc.d/postfix 60d8805fabdbb6a44f10f9af380985ad
 /etc/rsyslog.d/postfix.conf d8a09827fff2a22311e4dd4a83e95c83
 /etc/ufw/applications.d/postfix 5c7e746dc9255e750b8f50460de11a32
Description: High-performance mail transport agent
 Postfix is Wietse Venema's mail transport agent that started life as an
 alternative to the widely-used Sendmail program.  Postfix attempts to
 be fast, easy to administer, and secure, while at the same time being
 sendmail compatible enough to not upset existing users. Thus, the outside
 has a sendmail-ish flavor, but the inside is completely different.
Homepage: https://www.postfix.org
Original-Maintainer: LaMont Jones <[email protected]>

Package: postfix-pcre
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 83
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: postfix
Version: 3.8.6-1ubuntu0.1
Depends: postfix (= 3.8.6-1ubuntu0.1), libc6 (>= 2.4), libpcre2-8-0 (>= 10.22)
Conffiles:
 /etc/postfix/postfix-files.d/pcre.files 4e98e4e37ff5e622de0dae1b5198b2e6
Description: PCRE map support for Postfix
 Postfix is Wietse Venema's mail transport agent that started life as an
 alternative to the widely-used Sendmail program.  Postfix attempts to
 be fast, easy to administer, and secure, while at the same time being
 sendmail compatible enough to not upset existing users. Thus, the outside
 has a sendmail-ish flavor, but the inside is completely different.
 .
 This provides support for PCRE (perl compatible regular expression) maps in
 Postfix. If you plan to use PCRE maps with Postfix, you need this.
Homepage: https://www.postfix.org
Original-Maintainer: LaMont Jones <[email protected]>

Package: powermgmt-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 25
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.37ubuntu0.1
Description: common utils for power management
 This package ships the following scripts:
  * on_ac_power: determine whether the system is powered from battery or
    an abundant supply
  * lspower: list power sources the system knows about, and their status
Original-Maintainer: Adam Borowski <[email protected]>

Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1800
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2:4.0.4-4ubuntu3.2
Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Provides: watch
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libproc2-0 (>= 2:4.0.4), libsystemd0 (>= 254), libtinfo6 (>= 6), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2), open-vm-tools (<= 2011.12.20-562307-1)
Conffiles:
 /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f
 /etc/sysctl.conf 72b7c827a9636cda7b3b371091ff2dce
 /etc/sysctl.d/10-bufferbloat.conf 421a31e1c9eff34f39986fe122d9a583
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-kernel-hardening.conf f85fded186d1ad70c5f69ca6a88e4de6
 /etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
 /etc/sysctl.d/10-map-count.conf a8d15ef17fb211df1e974382b8af95ad
 /etc/sysctl.d/10-network-security.conf e2c60d912410543907a6c9ff21836ba8
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README.sysctl 48e64ce233c8aba8e0693adf8cf4c464
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps
Original-Maintainer: Craig Small <[email protected]>

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 596
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 23.7-1build1
Replaces: manpages-de (<< 4.9.1-1)
Depends: libc6 (>= 2.38), libtinfo6 (>= 6)
Breaks: manpages-de (<< 4.9.1-1)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/
Original-Maintainer: Craig Small <[email protected]>

Package: publicsuffix
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 375
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 20231001.0357-0.1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
 A machine-readable list of domain name suffixes that accept public
 registration.  Each suffix represents the part of a domain name which
 is not under the control of the individual registrant, which makes
 the list useful for grouping cookies, deciding same-origin policies,
 collating spam, and other activities.
Original-Maintainer: Daniel Kahn Gillmor <[email protected]>
Homepage: https://publicsuffix.org

Package: pure-ftpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 621
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.0.50-2.2build2
Replaces: ftp-server
Provides: ftp-server
Depends: lsb-base (>= 3.2-14), openbsd-inetd | inet-superserver, pure-ftpd-common (= 1.0.50-2.2build2), libc6 (>= 2.38), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libsodium23 (>= 1.0.10), libssl3t64 (>= 3.0.0)
Conflicts: ftp-server
Conffiles:
 /etc/ftpusers 5792584369edcb3791c57cae7978572e
 /etc/init.d/pure-ftpd 7293e56ec485bcf02109e3205bdb80e9
Description: Secure and efficient FTP server
 Free, secure, production-quality and standard-conformant FTP server.
 Features include chrooted home directories,
 virtual domains, built-in 'ls', anti-warez system, configurable ports for
 passive downloads, FXP protocol, bandwidth throttling, ratios,
 fortune files, Apache-like log files, fast standalone mode, atomic uploads,
 text / HTML / XML real-time status report, virtual users, virtual quotas,
 privilege separation, SSL/TLS and more.
Homepage: https://www.pureftpd.org/project/pure-ftpd/
Original-Maintainer: Stefan Hornburg (Racke) <[email protected]>

Package: pure-ftpd-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 332
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pure-ftpd
Version: 1.0.50-2.2build2
Replaces: pure-ftpd (<< 1.0.0)
Depends: debconf (>= 0.5) | debconf-2.0, libpam-modules, perl
Recommends: pure-ftpd
Conflicts: suidmanager (<< 0.50)
Conffiles:
 /etc/ftpallow 34476d18b35b0675891e35f08fde3195
 /etc/logrotate.d/pure-ftpd-common 9825eb2fb2f21f4c5ced902ea5f0de32
 /etc/pam.d/pure-ftpd 218f3025ae9d6bf9f2d68c1089f1c408
 /etc/pure-ftpd/conf/AltLog 8e2b67e9c0e125e4c540ae12262aa452
 /etc/pure-ftpd/conf/FSCharset 1ca15bf75755838f3db6aa559b6db2d3
 /etc/pure-ftpd/conf/MinUID ad865d2f63b9feb2552c220385fbb7e3
 /etc/pure-ftpd/conf/NoAnonymous eb4585ad9fe0426781ed7c49252f8225
 /etc/pure-ftpd/conf/PAMAuthentication eb4585ad9fe0426781ed7c49252f8225
 /etc/pure-ftpd/conf/PureDB 6db5965698527e1f140dfc73ed40d47c
 /etc/pure-ftpd/conf/TLSCipherSuite d339ec7c5fe5332d889610bf0c6f0ced
 /etc/pure-ftpd/conf/UnixAuthentication e4ac654ba9b61686c2dc854a1128a323
 /etc/pure-ftpd/pure-ftpd.conf 8922e96353cf70261a3e267216848ac5
 /etc/pure-ftpd/pureftpd-dir-aliases 4c0a2e0a1c5eb5d50d4396aef55027da
Description: Pure-FTPd FTP server (Common Files)
 This package provides files shared between the three pure-ftpd binary
 packages like startup scripts, documentation, and examples.
Homepage: https://www.pureftpd.org/project/pure-ftpd/
Original-Maintainer: Stefan Hornburg (Racke) <[email protected]>

Package: pv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 184
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.8.5-2build1
Depends: libc6 (>= 2.38)
Suggests: doc-base
Description: Shell pipeline element to meter data passing through
 pv (Pipe Viewer) can be inserted into any normal pipeline between two
 processes to give a visual indication of how quickly data is passing through,
 how long it has taken, how near to completion it is, and an estimate of how
 long it will be until completion.
 .
 To use it, insert it in a pipeline between two processes, with the
 appropriate options. Its standard input will be passed through to its
 standard output and progress will be shown on standard error.
Homepage: https://www.ivarch.com/programs/pv.shtml
Original-Maintainer: Antoine Beaupré <[email protected]>

Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 156
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: python-apt
Version: 2.7.7ubuntu5.2
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
 The apt_pkg Python interface will provide full access to the internal
 libapt-pkg structures allowing Python programs to easily perform a
 variety of functions.
 .
 This package contains locales.
Original-Maintainer: APT Development Team <[email protected]>

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 81
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.12.3-0ubuntu2.1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler, python3-supported-max (= 3.12), python3-supported-min (= 3.12)
Depends: python3.12 (>= 3.12.3-0~), libpython3-stdlib (= 3.12.3-0ubuntu2.1)
Pre-Depends: python3-minimal (= 3.12.3-0ubuntu2.1)
Suggests: python3-doc (>= 3.12.3-0ubuntu2.1), python3-tk (>= 3.12.3-0~), python3-venv (>= 3.12.3-0ubuntu2.1)
Conflicts: python3-distutils
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.12).
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3-apport
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 484
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: apport
Version: 2.28.1-0ubuntu3.8
Depends: python3-apt (>= 0.7.9), python3-httplib2, python3-launchpadlib, python3-problem-report (>= 2.28), python3-requests, python3-yaml, python3:any
Recommends: apport
Breaks: apport (<< 2.23.1), apport-gtk (<< 2.23.1), apport-kde (<< 2.23.1)
Description: Python 3 library for Apport crash report handling
 This Python package provides high-level functions for creating and
 handling apport crash reports:
 .
  * Query available and new reports.
  * Add OS, packaging, and process runtime information to a report.
  * Various frontend utility functions.
  * Python hook to generate crash reports when Python scripts fail.
Homepage: https://wiki.ubuntu.com/Apport

Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 694
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 2.7.7ubuntu5.2
Replaces: python-apt (<< 0.7.98+nmu1)
Depends: python3 (<< 3.13), python3 (>= 3.12~), python3:any, libapt-pkg6.0t64 (>= 2.7.11), libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), python-apt-common, distro-info-data
Recommends: lsb-release, iso-codes
Suggests: python-apt-doc, apt
Breaks: apt-xapian-index (<< 0.51~), kthresher (<= 1.4.0-1), python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
 The apt_pkg Python 3 interface will provide full access to the internal
 libapt-pkg structures allowing Python 3 programs to easily perform a
 variety of functions, such as:
 .
  - Access to the APT configuration system
  - Access to the APT package information database
  - Parsing of Debian package control files, and other files with a
    similar structure
 .
 The included 'aptsources' Python interface provides an abstraction of
 the sources.list configuration on the repository and the distro level.
Original-Maintainer: APT Development Team <[email protected]>

Package: python3-attr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 236
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-attrs
Version: 23.2.0-2
Depends: python3-importlib-metadata | python3-supported-min (>= 3.8), python3:any
Suggests: python-attr-doc
Description: Attributes without boilerplate (Python 3)
 attrs is an MIT-licensed Python package with class decorators that ease the
 chores of implementing the most common attribute-related object protocols.
 .
 You just specify the attributes to work with and attrs gives you:
   - a nice human-readable __repr__,
   - a complete set of comparison methods,
   - an initializer,
   - and much more
 without writing dull boilerplate code again and again.
 .
 This package contains attrs packaged for Python 3.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://attrs.readthedocs.org/

Package: python3-automat
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 124
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: automat
Version: 22.10.0-2
Depends: python3-attr, python3:any
Description: Self-service finite-state machines for the programmer on the go
 Automat is a library for concise, idiomatic Python expression of
 finite-state automata (particularly deterministic finite-state
 transducers).
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://pypi.python.org/pypi/Automat

Package: python3-bcrypt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 94
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: python-bcrypt
Version: 3.2.2-1build1
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.14)
Description: password hashing library for Python 3
 bcrypt is a Python module which provides a password hashing method based on
 the Blowfish password hashing algorithm, as described in
 "A Future-Adaptable Password Scheme" by Niels Provos and David Mazieres:
 http://static.usenix.org/events/usenix99/provos.html.
 .
 This package provides the bcrypt Python module for Python 3.x.
Homepage: https://github.com/pyca/bcrypt
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 57
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: blinker
Version: 1.7.0-1
Depends: python3:any
Suggests: python-blinker-doc
Description: Fast, simple object-to-object and broadcast signaling (Python3)
 Blinker provides fast & simple object-to-object and broadcast signaling
 for Python objects. Interested signal receivers can subscribe to specific
 senders or receive signals sent by any sender.
 .
 The core of Blinker is quite small but provides powerful features:
  * a global registry of named signals
  * anonymous signals
  * custom name registries
  * permanently or temporarily connected receivers
  * automatically disconnected receivers via weak referencing
  * sending arbitrary data payloads
  * collecting return values from signal receivers
  * thread safety
 .
 This package contains the Python 3 version.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/pallets-eco/blinker

Package: python3-boto3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1037
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-boto3
Version: 1.34.46+dfsg-1ubuntu1
Depends: python3-botocore (>= 1.31.49), python3-requests, python3-s3transfer (>= 0.1.10), python3-jmespath, python3:any
Description: Python interface to Amazon's Web Services - Python 3.x
 Boto is the Amazon Web Services interface for Python.  It allows developers
 to write software that makes use of Amazon services like S3 and EC2. Boto
 provides an easy to use, object-oriented API as well as low-level direct
 service access.
Homepage: https://github.com/boto/boto3
Original-Maintainer: Debian Cloud Team <[email protected]>

Package: python3-botocore
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 91883
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-botocore
Version: 1.34.46+repack-1ubuntu1
Depends: python3-dateutil, python3-jmespath, python3-urllib3 | python3-supported-max (<< 3.10), python3-urllib3 | python3-supported-min (>= 3.10), python3:any, python3-requests, python3-six
Breaks: awscli (<< 1.18.140)
Description: Low-level, data-driven core of boto 3 (Python 3)
 A low-level interface to a growing number of Amazon Web Services.
 The botocore package is the foundation for AWS-CLI.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/boto/botocore
Original-Maintainer: Debian Cloud Team <[email protected]>

Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 325
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-certifi
Version: 2023.11.17-1
Depends: ca-certificates, python3:any
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
 Certifi is a carefully curated collection of Root Certificates for
 validating the trustworthiness of SSL certificates while verifying
 the identity of TLS hosts. It has been extracted from the Requests
 project.
 .
 The version of certifi in this Debian package is patched to return
 the location of Debian-provided CA certificates, instead of those
 packaged by upstream.
 .
 This is the python3 package.
Original-Maintainer: Sebastien Delafond <[email protected]>
Homepage: https://github.com/certifi/python-certifi

Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 216
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python-cffi
Version: 1.16.0-2build1
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.13), python3 (>= 3.12~), libc6 (>= 2.38), libffi8 (>= 3.4)
Description: Foreign Function Interface for Python 3 calling C code - runtime
 Convenient and reliable way of calling C code from Python 3.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Homepage: https://cffi.readthedocs.org/
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1141
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: chardet
Version: 5.2.0+dfsg-1
Replaces: python-chardet (<< 3.0.4-6)
Depends: python3:any, python3-pkg-resources
Breaks: python-chardet (<< 3.0.4-6)
Description: Universal Character Encoding Detector (Python3)
 Chardet is a continuation of Mark Pilgrim's excellent original chardet port
 from C, and Ian Cordasco's charade Python 3-compatible fork.
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * Big5, GB2312/GB18030, EUC-TW, HZ-GB-2312, and ISO-2022-CN (Traditional
    and Simplified Chinese)
  * EUC-JP, SHIFT_JIS, and ISO-2022-JP (Japanese)
  * EUC-KR and ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, and windows-1251 (Russian)
  * ISO-8859-2 and windows-1250 (Hungarian)
  * ISO-8859-5 and windows-1251 (Bulgarian)
  * ISO-8859-1 and windows-1252 (Western European languages)
  * ISO-8859-7 and windows-1253 (Greek)
  * ISO-8859-8 and windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
  * UTF-32 BE, LE, 3412-ordered, or 2143-ordered (with a BOM)
  * UTF-16 BE or LE (with a BOM)
  * UTF-8 (with or without a BOM)
  * ASCII
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Original-Maintainer: Piotr Ożarowski <[email protected]>
Homepage: https://github.com/chardet/chardet

Package: python3-click
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 371
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-click
Version: 8.1.6-2
Depends: python3-colorama, python3-importlib-metadata | python3-supported-min (>= 3.8), python3:any
Breaks: python3-click-threading (<< 0.5.0)
Description: Wrapper around optparse for command line utilities - Python 3.x
 Click is a Python package for creating beautiful command line interfaces
 in a composable way with as little code as necessary.  It's the "Command
 Line Interface Creation Kit".  It's highly configurable but comes with
 sensible defaults out of the box.
 .
 It aims to make the process of writing command line tools quick and fun
 while also preventing any frustration caused by the inability to implement
 an intended CLI API.
 .
 This is the Python 3 compatible package.
Original-Maintainer: Debian Python Team <[email protected]>,
Homepage: https://github.com/pallets/click

Package: python3-colorama
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 127
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-colorama
Version: 0.4.6-4
Depends: python3:any
Description: Cross-platform colored terminal text in Python - Python 3.x
 Python-colorama provides a simple cross-platform API to print colored terminal
 text from Python applications.
 .
 ANSI escape character sequences are commonly used to produce colored terminal
 text on Unix. Colorama provides some shortcuts to generate these sequences.
 .
 This package provides the module for Python 3.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/tartley/colorama

Package: python3-commandnotfound
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 51
Maintainer: Michael Vogt <[email protected]>
Architecture: all
Source: command-not-found
Version: 23.04.0
Replaces: command-not-found (<< 0.3ubuntu7)
Depends: lsb-release, python3-apt, python3-gdbm, python3:any
Description: Python 3 bindings for command-not-found.
 This package will install the Python 3 library for command_not_found tool.
Original-Maintainer: Zygmunt Krynicki <[email protected]>

Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 162
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: configobj
Version: 5.0.8-3
Depends: python3:any
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
 .
  This is the Python 3 version of the package.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: http://www.voidspace.org.uk/python/configobj.html

Package: python3-constantly
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 78
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: constantly
Version: 23.10.4-1
Depends: python3:any
Description: Symbolic constants in Python
 A library that provides symbolic constant support. It includes
 collections and constants with text, numeric, and bit flag
 values.
 .
 Originally twisted.python.constants from the Twisted project.
 .
 This package provides the Python 3.x module.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/twisted/constantly

Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3244
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: python-cryptography
Version: 41.0.7-4ubuntu0.4
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.34), libgcc-s1 (>= 4.2), libssl3t64 (>= 3.0.0)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Description: Python library exposing cryptographic recipes and primitives (Python 3)
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
 .
 This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-dateutil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 320
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: python-dateutil
Version: 2.8.2-3ubuntu1
Depends: python3-six (>= 1.5), python3:any, tzdata
Breaks: khal (<< 1:0.9.10-0.1~), python3-icalendar (<< 4.0.3-2~), python3-vobject (<< 0.9.6.1-0.1~)
Description: powerful extensions to the standard Python 3 datetime module
 It features:
 .
  * computing of relative deltas (next month, next year, next monday, last week
    of month, etc);
  * computing of relative deltas between two given date and/or datetime objects
  * computing of dates based on very flexible recurrence rules, using a superset
    of the iCalendar specification. Parsing of RFC strings is supported as well.
  * generic parsing of dates in almost any string format
  * timezone (tzinfo) implementations for tzfile(5) format files
    (/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all
    known formats), iCalendar format files, given ranges (with help from
    relative deltas), local machine timezone, fixed offset timezone, UTC
    timezone
  * computing of Easter Sunday dates for any given year, using Western, Orthodox
    or Julian algorithms
 .
 This package provides the Python 3 version of the datetime module.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/dateutil/dateutil

Package: python3-dbus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 408
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: dbus-python
Version: 1.3.2-5build3
Depends: python3 (<< 3.13), python3 (>= 3.12~), python3:any, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0t64 (>= 2.16.0)
Recommends: python3-gi
Suggests: python-dbus-doc
Description: simple interprocess messaging system (Python 3 interface)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a Python 3 interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings#Python
Original-Maintainer: Utopia Maintenance Team <[email protected]>

Package: python3-debconf
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 19
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: debconf
Version: 1.5.86ubuntu1
Depends: debconf (= 1.5.86ubuntu1), python3:any
Description: interact with debconf from Python 3
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
 .
 This package provides a debconf module to allow Python 3 programs to
 interact with a debconf frontend.
Original-Maintainer: Debconf Developers <[email protected]>

Package: python3-debian
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 591
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-debian
Version: 0.1.49ubuntu2
Depends: python3-chardet, zstd, python3:any
Recommends: python3-apt
Suggests: gpgv
Description: Python 3 modules to work with Debian-related data formats
 This package provides Python 3 modules that abstract many formats of Debian
 related files. Currently handled are:
  * Debtags information (debian.debtags module)
  * debian/changelog (debian.changelog module)
  * Packages files, pdiffs (debian.debian_support module)
  * Control files of single or multiple RFC822-style paragraphs, e.g.
    debian/control, .changes, .dsc, Packages, Sources, Release, etc.
    (debian.deb822 module)
  * Raw .deb and .ar files, with (read-only) access to contained
    files and meta-information
Homepage: https://salsa.debian.org/python-debian-team/python-debian
Original-Maintainer: Debian python-debian Maintainers <[email protected]>

Package: python3-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 151
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.12.3-0ubuntu2.1
Replaces: python3 (<< 3.9.2-1~), python3.1 (<< 3.1.2+20100706-3)
Depends: python3 (= 3.12.3-0ubuntu2.1), libpython3-dev (= 3.12.3-0ubuntu2.1), python3.12-dev (>= 3.12.3-0~), libjs-sphinxdoc (>= 7.2.2)
Breaks: python3 (<< 3.9.2-1~)
Description: header files and a static library for Python (default)
 Header files, a static library and development tools for building
 Python modules, extending the Python interpreter or embedding Python
 in applications.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's headers (currently v3.12).
Built-Using: sphinx (= 7.2.6-6)
Homepage: https://www.python.org/
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3-distro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: python-distro
Version: 1.9.0-1
Depends: lsb-release, python3:any
Description: Linux OS platform information API
 distro (for: Linux Distribution) provides information about the Linux
 distribution it runs on, such as a reliable machine-readable ID, or version
 information.
 .
 It is a renewed alternative implementation for Python's original
 platform.linux_distribution function, but it also provides much more
 functionality which isn't necessarily Python bound like a command-line
 interface.
 .
 This is the Python 3 version of the library.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/python-distro/distro

Package: python3-distro-info
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 35
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: distro-info
Version: 1.7build1
Depends: distro-info-data (>= 0.46), python3:any
Description: information about distributions' releases (Python 3 module)
 Information about all releases of Debian and Ubuntu.
 .
 This package contains a Python 3 module for parsing the data in
 distro-info-data. There is also a command line interface in the distro-info
 package.
Original-Maintainer: Benjamin Drung <[email protected]>

Package: python3-distupgrade
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 610
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:24.04.28
Replaces: python3-update-manager (<< 1:0.165)
Depends: python3:any, python3-update-manager (>= 1:19.04.2~), python3-apt (>= 0.8.5~), python3-dbus, python3-distro-info, gpgv, lsb-release, sensible-utils, procps
Breaks: python3-update-manager (<< 1:0.165)
Description: manage release upgrades
 This is the DistUpgrade Python 3 module

Package: python3-gdbm
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 55
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: python3-stdlib-extensions
Version: 3.12.3-0ubuntu1
Provides: python3.12-gdbm
Depends: python3 (>= 3.12.2-0~), python3 (<< 3.13), libc6 (>= 2.4), libgdbm6t64 (>= 1.16)
Suggests: python3-gdbm-dbg
Description: GNU dbm database support for Python 3.x
 GNU dbm database module for Python 3.x. Install this if you want to
 create or read GNU dbm database files with Python.
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3-gi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 742
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: pygobject
Version: 3.48.2-1
Depends: gir1.2-glib-2.0 (>= 1.64.0), gir1.2-girepository-2.0, python3 (<< 3.13), python3 (>= 3.12~), python3:any, libc6 (>= 2.14), libffi8 (>= 3.4), libgirepository-1.0-1 (>= 1.71.0), libgirepository-1.0-1-with-libffi8 (>= 1.64.0~), libglib2.0-0t64 (>= 2.77.0)
Description: Python 3 bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 3 binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python 3.
Original-Maintainer: Debian GNOME Maintainers <[email protected]>
Homepage: https://pygobject.readthedocs.io/

Package: python3-hamcrest
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 174
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pyhamcrest
Version: 2.1.0-1
Depends: python3:any
Description: Hamcrest framework for matcher objects (Python 3)
 PyHamcrest is a framework for writing matcher objects, allowing you to
 declaratively define "match" rules. There are a number of situations where
 matchers are invaluable, such as UI validation, or data filtering, but it is in
 the area of writing flexible tests that matchers are most commonly used. This
 tutorial shows you how to use PyHamcrest for unit testing.
 .
 When writing tests it is sometimes difficult to get the balance right between
 overspecifying the test (and making it brittle to changes), and not specifying
 enough (making the test less valuable since it continues to pass even when the
 thing being tested is broken). Having a tool that allows you to pick out
 precisely the aspect under test and describe the values it should have, to a
 controlled level of precision, helps greatly in writing tests that are
 "just right." Such tests fail when the behavior of the aspect under test
 deviates from the expected behavior, yet continue to pass when minor,
 unrelated changes to the behaviour are made.
 .
 This package provides the Python 3.x modules.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://hamcrest.org/

Package: python3-httplib2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 127
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-httplib2
Version: 0.20.4-3
Depends: ca-certificates, python3-pyparsing, python3:any
Breaks: python3-wsgi-intercept (<< 1.9.0)
Description: comprehensive HTTP client library written for Python3
 httplib2.py supports many features left out of other HTTP libraries.
  * HTTP and HTTPS
  * Keep-Alive
  * Authentication
  * Caching
  * All Methods
  * Redirects
  * Compression
  * Lost update support
  * Unit Tested
 .
 This package provides module for python3 series.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/httplib2/httplib2

Package: python3-hyperlink
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 229
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: hyperlink
Version: 21.0.0-5
Depends: python3-idna, python3:any
Description: Immutable, Pythonic, correct URLs.
 Hyperlink provides a pure-Python implementation of immutable URLs. Based on
 RFC 3986 and 3987, the Hyperlink URL makes working with both URIs and IRIs
 easy.
 .
 This package provides the Python 3.x module.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/python-hyper/hyperlink

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 335
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: python-idna
Version: 3.6-2ubuntu0.1
Depends: python3:any
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/kjd/idna
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-incremental
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 103
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: incremental
Version: 22.10.0-1
Depends: python3:any
Recommends: python3-click, python3-twisted
Description: Library for versioning Python projects
 Incremental is a small library that versions your Python projects.
 .
 This package provides the Python 3.x module.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/twisted/incremental

Package: python3-jmespath
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-jmespath
Version: 1.0.1-1
Depends: python3:any
Description: JSON Matching Expressions (Python 3)
 JMESPath is python library which allows you to declaratively specify how
 to extract elements from a JSON document.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/boto/jmespath

Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 105
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pyjwt
Version: 2.7.0-1ubuntu0.1
Depends: python3-typing-extensions | python3-supported-min (>> 3.7), python3:any
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
 PyJWT implements the JSON Web Token draft 01, a way of representing
 signed content using JSON data structures.
 .
 Supported algorithms for cryptographic signing:
 .
   * HS256 - HMAC using SHA-256 hash algorithm (default)
   * HS384 - HMAC using SHA-384 hash algorithm
   * HS512 - HMAC using SHA-512 hash algorithm
   * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
     algorithm
   * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
     algorithm
   * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
     algorithm
 .
 Supported reserved claim names:
   - "exp" (Expiration Time) Claim
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-launchpadlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1770
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-launchpadlib
Version: 1.11.0-6
Depends: python3-httplib2, python3-lazr.restfulclient, python3-lazr.uri, python3-six, init-system-helpers (>= 1.52), python3:any
Suggests: python3-keyring, python3-pkg-resources, python3-testresources
Description: Launchpad web services client library (Python 3)
 A free Python library for scripting Launchpad through its web services
 interface.
 .
 It currently provides access to the following parts of Launchpad:
  * People and Teams
  * Team memberships
  * Bugs and bugtasks
 .
 The Launchpad API is currently in beta, and may well change in ways
 incompatible with this library.
 .
 This package is for Python 3.
Original-Maintainer: Stefano Rivera <[email protected]>
Homepage: https://launchpad.net/launchpadlib

Package: python3-lazr.restfulclient
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 177
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: lazr.restfulclient
Version: 0.14.6-1
Depends: python3-httplib2 (>= 0.7.7), python3-lazr.uri, python3-wadllib (>= 1.1.4), python3-distro, python3-importlib-metadata | python3-supported-min (>= 3.8), python3-oauthlib, python3-pkg-resources, python3:any
Description: client for lazr.restful-based web services (Python 3)
 A programmable client library that takes advantage of the commonalities
 among lazr.rest web services to provide added functionality on top
 of wadllib.
 .
 This package is for Python 3.
Original-Maintainer: Stefano Rivera <[email protected]>
Homepage: https://launchpad.net/lazr.restfulclient

Package: python3-lazr.uri
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 73
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: lazr.uri
Version: 1.0.6-3
Depends: python3-importlib-metadata | python3 (>> 3.8), python3-pkg-resources, python3:any
Description: library for parsing, manipulating, and generating URIs
 A self-contained, easily reusable, Python library for parsing,
 manipulating and generating URIs. With it you can extract parts
 of a URL, compare URIs to see if one contains another, search for
 URIs in text, and many other things.
 .
 This package contains the library for Python 3.x.
Original-Maintainer: Stefano Rivera <[email protected]>
Homepage: https://launchpad.net/lazr.uri

Package: python3-magic
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-magic
Version: 2:0.4.27-3
Depends: python3:any, libmagic1t64
Description: python3 interface to the libmagic file type identification library
 python-magic is a Python interface to the libmagic file type
 identification library. libmagic identifies file types by checking
 their headers according to a predefined list of file types. This
 functionality is exposed to the command line by the Unix command file.
 .
 This package provides the Python 3 version of the python-magic module.
Original-Maintainer: Christoph Biedl <[email protected]>
Homepage: https://github.com/ahupp/python-magic/

Package: python3-markdown-it
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 287
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: markdown-it-py
Version: 3.0.0-2
Depends: python3-mdurl, python3:any
Breaks: python3-mdit-py-plugins (<< 0.4.0-1)
Description: Python port of markdown-it and some its associated plugins
 High speed Python markdown parser based in markdown-it. markdown-it-py
 follows the CommonMark spec for baseline parsing. Also, new syntax
 rules can be added and even replace existing ones. New syntax extensions
 can be added to extend the parser.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/executablebooks/markdown-it-py

Package: python3-maxminddb
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 107
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: python-maxminddb
Version: 2.5.2-1build1
Depends: python3 (<< 3.13), python3 (>= 3.12~), python3-pkg-resources, python3:any, libc6 (>= 2.14), libmaxminddb0 (>= 1.0.2)
Suggests: python-maxmindb-doc
Description: Python 3 module for reading the MaxMind DB format
 This is a Python module for reading MaxMind DB files. The module includes both
 a pure Python reader and an optional C extension.
 .
 MaxMind DB is a binary file format that stores data indexed by IP address
 subnets (IPv4 or IPv6).
Homepage: https://github.com/maxmind/MaxMind-DB-Reader-python
Original-Maintainer: Faidon Liambotis <[email protected]>

Package: python3-mdurl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 42
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: mdurl
Version: 0.1.2-1
Depends: python3:any
Description: Python port of the JavaScript mdurl package
 mdurl is a set of URL utilities for the markdown-it-py package. It
 provides a pure-Python implementation of several functions from the
 original JavaScript package, such as .decode(), .parse(), .encode().
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/executablebooks/mdurl

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 112
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.12.3-0ubuntu2.1
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.12-minimal (>= 3.12.3-0~)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.12-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: https://www.python.org/
Cnf-Visible-Pkgname: python3
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3-netifaces
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 57
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: netifaces
Version: 0.11.0-2build3
Depends: python3 (<< 3.13), python3 (>= 3.12~), libc6 (>= 2.4)
Description: portable network interface information - Python 3.x
 netifaces provides a (hopefully portable-ish) way for Python programmers to
 get access to a list of the network interfaces on the local machine, and to
 obtain the addresses of those network interfaces.
 .
 This package contains the module for Python 3.x.
Homepage: https://alastairs-place.net/projects/netifaces/
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-netplan
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 149
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: netplan.io
Version: 1.1.2-8ubuntu1~24.04.2
Replaces: netplan.io (<< 0.107-3~)
Depends: python3 (>= 3~), python3:any, libc6 (>= 2.4), libnetplan1 (= 1.1.2-8ubuntu1~24.04.2), python3-cffi-backend
Breaks: netplan.io (<< 0.107-3~)
Description: Declarative network configuration Python bindings
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package provides a CFFI based Python bindings to libnetplan.
Homepage: https://netplan.io/
Original-Maintainer: Debian Networking Team <[email protected]>

Package: python3-newt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 95
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.24-2ubuntu2
Depends: libnewt0.52 (= 0.52.24-2ubuntu2), python3 (<< 3.13), python3 (>= 3.12~), python3:any, libc6 (>= 2.4)
Description: NEWT module for Python3
 This module allows you to build a text UI for your Python3 scripts
 using newt.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <[email protected]>

Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 555
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-oauthlib
Version: 3.2.2-1
Depends: python3:any, python3-blinker, python3-cryptography, python3-jwt
Description: generic, spec-compliant implementation of OAuth for Python3
 OAuthLib is a generic utility which implements the logic of OAuth without
 assuming a specific HTTP request object. It can be used to graft OAuth support
 onto HTTP libraries.
 .
 OAuth 1 is fully supported per the RFC for both clients and providers.
 .
 OAuth 2 client and provider support for:
 .
   - Authorization Code Grant
   - Implicit Grant
   - Client Credentials Grant
   - Resource Owner Password Credentials Grant
   - Refresh Tokens
   - Bearer Tokens
   - Draft MAC tokens
   - Token Revocation
   - OpenID Connect Authentication
 .
 This package contains the Python 3 version of the library.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/idan/oauthlib

Package: python3-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 253
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pyopenssl
Version: 23.2.0-1ubuntu0.1
Depends: python3-cryptography (>= 38), python3:any
Suggests: python-openssl-doc, python3-openssl-dbg
Description: Python 3 wrapper around the OpenSSL library
 High-level wrapper around a subset of the OpenSSL library, includes
 .
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error
     codes
 .
 A lot of the object methods do nothing more than calling a
 corresponding function in the OpenSSL library.
 .
 This package contains the Python 3 version of pyopenssl.
Homepage: https://pyopenssl.org/
Original-Maintainer: Sandro Tosi <[email protected]>

Package: python3-packaging
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 185
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-packaging
Version: 24.0-1
Depends: python3:any
Description: core utilities for python3 packages
 These core utilities currently consist of:
  - Version Handling (PEP 440)
  - Dependency Specification (PEP 440)
Original-Maintainer: Matthias Klose <[email protected]>
Homepage: https://pypi.python.org/pypi/packaging

Package: python3-pexpect
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 212
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pexpect
Version: 4.9-2
Depends: python3-ptyprocess, python3:any
Suggests: python-pexpect-doc
Description: Python 3 module for automating interactive applications
 Pexpect is a pure Python 3 module for spawning child applications;
 controlling them; and responding to expected patterns in their
 output. Pexpect works like Don Libes' Expect. Pexpect allows your
 script to spawn a child application and control it as if a human were
 typing commands.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/pexpect/pexpect

Package: python3-pip
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6862
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-pip
Version: 24.0+dfsg-1ubuntu1.3
Replaces: python-pip
Provides: pip
Depends: ca-certificates, python3-setuptools, python3-wheel, python3:any
Recommends: build-essential, python3-dev (>= 3.2)
Breaks: python-pip
Description: Python package installer
 pip is the Python package installer.  It integrates with virtualenv, doesn't
 do partial installs, can save package state for replaying, can install from
 non-egg sources, and can install from version control repositories.
 .
 This is the Python 3 version of the package.
Homepage: https://pip.pypa.io/en/stable/
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 742
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 68.1.2-2ubuntu1.2
Depends: python3:any
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3-problem-report
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 60
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: apport
Version: 2.28.1-0ubuntu3.8
Depends: python3:any
Suggests: python3-zstandard
Description: Python 3 library to handle problem reports
 This Python library provides an interface for creating, modifying,
 and accessing standardized problem reports for program and kernel
 crashes and packaging bugs.
 .
 These problem reports use standard Debian control format syntax
 (RFC822).
Homepage: https://wiki.ubuntu.com/Apport

Package: python3-ptyprocess
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 58
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: ptyprocess
Version: 0.7.0-5
Depends: python3:any
Description: Run a subprocess in a pseudo terminal from Python 3
 Launch a subprocess in a pseudo terminal (pty), and interact with both
 the process and its pty.
 .
 Sometimes, piping stdin and stdout is not enough. There might be a password
 prompt that doesn't read from stdin, output that changes when it's going to
 a pipe rather than a terminal, or curses-style interfaces that rely on a
 terminal. If you need to automate these things, running the process in a
 pseudo terminal (pty) is the answer.
 .
 This package installs the library for Python 3.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/pexpect/ptyprocess

Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 390
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pyasn1
Version: 0.4.8-4ubuntu0.2
Depends: python3:any
Description: ASN.1 library for Python (Python 3 module)
 This  is  an implementation  of  ASN.1  types  and codecs  in  Python
 programming language. It has been first written to support particular
 protocol (SNMP) but then generalized  to be suitable for a wide range
 of protocols based on ASN.1 specification.
 .
 This package contains the Python 3 module.
Homepage: http://snmplabs.com/pyasn1/index.html
Original-Maintainer: Jan Lübbe <[email protected]>

Package: python3-pyasn1-modules
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 693
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-pyasn1-modules
Version: 0.2.8-1
Depends: python3-pyasn1 (>= 0.4.6), python3-pyasn1 (<< 0.5.0), python3:any
Description: Collection of protocols modules written in ASN.1 language (Python 3)
 This is a small but growing collection of ASN.1 data structures
 expressed in Python terms using pyasn1 data model.
 .
 It's thought to be useful to protocol developers and testers.
 .
 Please note that pyasn1_modules is neither part of the pyasn1 package
 nor related to it.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://pypi.python.org/pypi/pyasn1-modules

Package: python3-pyasyncore
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 43
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-pyasyncore
Version: 1.0.2-2
Depends: python3:any
Description: asyncore for Python 3.12 onwards
 This package contains the asyncore module as found in Python versions prior to
 3.12. It is provided so that existing code relying on "import asyncore" is
 able to continue being used without significant refactoring.
 .
 The module's source code is taken directly from the Python standard library.
 The specific version of asyncore.py used is the last update before the
 addition of removal warnings at import time, and is essentially equivalent to
 the version provided with Python 3.9.
 .
 Please note that new projects should prefer asyncio.
Original-Maintainer: Debian OpenStack <[email protected]>
Homepage: https://github.com/simonrob/pyasyncore

Package: python3-pygments
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 4418
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: pygments
Version: 2.17.2+dfsg-1
Replaces: python-pygments (<< 2.3.1+dfsg-4~)
Depends: python3-pkg-resources, python3:any
Suggests: python-pygments-doc, ttf-bitstream-vera
Breaks: python-pygments (<< 2.3.1+dfsg-4~)
Description: syntax highlighting package written in Python 3
 Pygments aims to be a generic syntax highlighter for general use in all kinds
 of software such as forum systems, wikis or other applications that need to
 prettify source code.
 .
 Highlights are:
   * a wide range of common languages and markup formats is supported
   * special attention is paid to details, increasing quality by a fair amount
   * support for new languages and formats are added easily
   * a number of output formats, presently HTML, LaTeX and ANSI sequences
   * it is usable as a command-line tool and as a library
Original-Maintainer: Piotr Ożarowski <[email protected]>
Homepage: https://pygments.org/

Package: python3-pyinotify
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 107
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pyinotify
Version: 0.9.6-2ubuntu1
Depends: python3:any, python3-pyasyncore
Suggests: python-pyinotify-doc
Description: simple Linux inotify Python bindings
 pyinotify is a simple wrapper for the Linux inotify mechanism.
 .
 inotify is a Linux Kernel feature available since 2.6.13. inotify makes
 it possible for applications to easily be notified of filesystem changes.
 .
 This is the Python 3 version of the package.
Homepage: https://github.com/seb-m/pyinotify
Original-Maintainer: Mikhail Gusarov <[email protected]>

Package: python3-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 415
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: pyparsing
Version: 3.1.1-1
Depends: python3:any
Suggests: python-pyparsing-doc
Breaks: python3-translate (<< 3.6.0~), translate-toolkit (<< 3.6.0~)
Description: alternative to creating and executing simple grammars - Python 3.x
 The parsing module is an alternative approach to creating and
 executing simple grammars, vs. the traditional lex/yacc approach, or
 the use of regular expressions.  The parsing module provides a
 library of classes that client code uses to construct the grammar
 directly in Python code.
 .
 Here's an example:
 .
  from pyparsing import Word, alphas
  greet = Word(alphas) + "," + Word(alphas) + "!"
  hello = "Hello, World!"
  print hello, "->", greet.parseString(hello)
 .
 This package contains the Python 3.x version of python-pyparsing.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/pyparsing/pyparsing/

Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 233
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: requests
Version: 2.31.0+dfsg-1ubuntu1.1
Depends: python3-certifi, python3-chardet (>= 3.0.2), python3-idna, python3-urllib3 (>= 1.21.1), python3:any, ca-certificates
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks, python-requests-doc
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: https://requests.readthedocs.io/
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-rich
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1044
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: rich
Version: 13.7.1-1
Depends: python3-markdown-it, python3-pygments (>= 2.14.0), python3-typing-extensions (>= 3.7.4) | python3-supported-min (>= 3.9), python3:any
Description: render rich text, tables, progress bars, syntax highlighting, markdown and more
 Rich is a Python library for rich text and beautiful formatting in the
 terminal.
 .
 The Rich API makes it easy to add color and style to terminal output. Rich can
 also render pretty tables, progress bars, markdown, syntax highlighted source
 code, tracebacks, and more — out of the box.
 .
 Here's a list of the core functionalities of rich:
 .
  * to effortlessly add rich output to your application, you can import the rich
    print method, which has the same signature as the builtin Python function
  * Rich can be installed in the Python REPL, so that any data structures will
    be pretty printed and highlighted
  * for more control over rich terminal content, import and construct a Console
    object. The Console object has a print method which has an intentionally
    similar interface to the builtin print function
  * to insert an emoji in to console output place the name between two colons
  * Rich can render flexible tables with unicode box characters. There is a
    large variety of formatting options for borders, styles, cell alignment etc
  * Rich can render multiple flicker-free progress bars to track long-running
    tasks.
  * Rich can render content in neat columns with equal or optimal width.
  * Rich can render markdown and does a reasonable job of translating the
    formatting to the terminal
  * Rich can render beautiful tracebacks which are easier to read and show more
    code than standard Python tracebacks. You can set Rich as the default
    traceback handler so all uncaught exceptions will be rendered by Rich.
Original-Maintainer: Sandro Tosi <[email protected]>
Homepage: https://github.com/Textualize/rich

Package: python3-s3transfer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 313
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-s3transfer
Version: 0.10.1-1ubuntu2
Depends: python3-botocore (>= 1.34.18+repack-1~), python3:any
Description: Amazon S3 Transfer Manager for Python3
 S3transfer is a Python library for managing Amazon S3 transfers.
 .
 This package contains the module for Python 3.
 This project is not currently GA. For a basic, stable interface of s3transfer,
 try the interfaces exposed in python-boto3
Homepage: https://github.com/boto/s3transfer
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-serial
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 458
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: pyserial
Version: 3.5-2
Depends: python3:any
Suggests: python3-wxgtk3.0 | python3-wxgtk
Description: pyserial - module encapsulating access for the serial port
 This module encapsulates the access for the serial port. It provides
 back-ends for standard Python running on Windows, Linux, BSD (possibly
 any POSIX compliant system). The module named "serial" automatically
 selects the appropriate back-end.
Original-Maintainer: Matthias Klose <[email protected]>
Homepage: https://github.com/pyserial/pyserial

Package: python3-service-identity
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 52
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-service-identity
Version: 24.1.0-1
Depends: python3-attr, python3-cryptography, python3-pyasn1, python3-pyasn1-modules, python3:any
Recommends: python3-idna
Description: Service identity verification for pyOpenSSL (Python 3 module)
 Service_identity aspires to give you all the tools you need for verifying
 whether a certificate is valid for the intended purposes.
 .
 In the simplest case, this means host name verification.  However,
 service_identity implements RFC 6125 fully and plans to add other
 relevant RFCs too.
 .
 This package contains service_identity for Python 3.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/pyca/service-identity

Package: python3-setuptools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2232
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 68.1.2-2ubuntu1.2
Depends: python3-pkg-resources (= 68.1.2-2ubuntu1.2), python3:any
Suggests: python-setuptools-doc
Description: Python3 Distutils Enhancements
 Extensions to the python-distutils for large or complex distributions.
Homepage: https://pypi.python.org/pypi/setuptools
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 59
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.16.0-4
Depends: python3:any
Description: Python 2 and 3 compatibility library
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/benjaminp/six

Package: python3-software-properties
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 130
Maintainer: Michael Vogt <[email protected]>
Architecture: all
Source: software-properties
Version: 0.99.49.4
Depends: gpg, iso-codes, lsb-release, python3, python3-apt (>= 2.7.1~), python3-gi, python3-launchpadlib, python3:any
Recommends: unattended-upgrades
Description: manage the repositories that you install software from
 This software provides an abstraction of the used apt repositories.
 It allows you to easily manage your distribution and independent software
 vendor software sources.

Package: python3-systemd
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 211
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: python-systemd
Version: 235-1build4
Depends: python3 (<< 3.13), python3 (>= 3.12~), python3:any, libc6 (>= 2.38), libsystemd0 (>= 246)
Description: Python 3 bindings for systemd
 This package contains Python 3 bindings for native access to the
 systemd facilities.
 .
 Functionality is separated into a number of modules:
  * systemd.journal supports sending of structured messages to the
    journal and reading journal files
  * systemd.daemon wraps parts of libsystemd useful for writing daemons
    and socket activation
  * systemd.id128 provides functions for querying machine and boot
    identifiers and a list of message identifiers provided by systemd
  * systemd.login wraps parts of libsystemd used to query logged in
    users and available seats and machines
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: python3-twisted
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 12959
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: twisted
Version: 24.3.0-1ubuntu0.2
Replaces: python3-twisted-experimental
Depends: python3-bcrypt (>= 3.0.0), python3-cryptography (>= 2.5), python3-hamcrest, python3-idna, python3-openssl, python3-service-identity (>= 18.1.0), python3-attr (>= 19.2.0), python3-automat (>= 0.8.0), python3-constantly, python3-hyperlink, python3-incremental (>= 21.3.0), python3-zope.interface (>= 5), python3:any
Suggests: python3-pampy, python3-serial, python3-tk, python3-wxgtk4.0
Breaks: python3-h2 (<< 3.0.0), python3-treq (<< 20.9.0)
Conflicts: python3-twisted-experimental
Description: Event-based framework for internet applications
 It includes a web server, a telnet server, a multiplayer RPG engine, a
 generic client and server for remote object access, and APIs for creating
 new protocols.
Homepage: https://twistedmatrix.com/
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-update-manager
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 189
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: update-manager
Version: 1:24.04.12
Replaces: update-manager-core (<< 1:0.163)
Depends: python3-apt (>= 0.8.5~), python3-distro-info, python3-distupgrade, python3:any
Suggests: python3-launchpadlib
Breaks: python3-distupgrade (<< 1:16.10.10), update-manager-core (<< 1:0.163)
Description: Python 3.x module for update-manager
 Python module for update-manager (UpdateManager).
 .
 This package contains the Python 3.x version of this module.

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 460
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-urllib3
Version: 2.0.7-1ubuntu0.7
Depends: python3:any
Recommends: ca-certificates
Suggests: python3-brotli, python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
 .
 This package contains the Python 3 version of the library.
Homepage: https://urllib3.readthedocs.org
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-wadllib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 331
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: python-wadllib
Version: 1.3.6-5
Depends: python3-importlib-metadata | python3-supported-min (>> 3.8), python3-lazr.uri, python3-pkg-resources, python3:any
Description: Python 3 library for navigating WADL files
 The Web Application Description Language (WADL) is an XML vocabulary for
 describing the capabilities of HTTP resources. wadllib can be used in
 conjunction with an HTTP library to navigate and manipulate those resources.
 .
 This package provides wadllib for Python 3.x.
Original-Maintainer: Stefano Rivera <[email protected]>
Homepage: https://launchpad.net/wadllib

Package: python3-wheel
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 238
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: wheel
Version: 0.42.0-2
Depends: python3:any
Suggests: python3-setuptools
Description: built-package format for Python
 A wheel is a ZIP-format archive with a specially formatted filename and the
 `.whl` extension.  It is designed to contain all the files for a PEP 376
 compatible install in a way that is very close to the on-disk format.
 .
 The wheel project provides a `bdist_wheel` command for setuptools.  Wheel
 files can be installed with `pip`.
 .
 This is the Python 3 compatible package.
Original-Maintainer: Debian Python Team <[email protected]>
Homepage: https://github.com/pypa/wheel

Package: python3-xkit
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 110
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: x-kit
Version: 0.5.0ubuntu6
Depends: python3:any (>= 3.2~)
Description: library for the manipulation of xorg.conf files (Python 3)
 X-Kit is library for the manipulation of xorg.conf files.
 .
 This is the Python 3 version of the package.
Original-Maintainer: Alberto Milone (tseliot) <[email protected]>

Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 512
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: pyyaml
Version: 6.0.1-2build2
Depends: python3 (<< 3.13), python3 (>= 3.12~), python3:any, libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3-zope.interface
Status: install ok installed
Priority: optional
Section: zope
Installed-Size: 923
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: zope.interface
Version: 6.1-1build1
Provides: python3-zope
Depends: python3 (<< 3.13), python3 (>= 3.12~), python3-pkg-resources, python3:any, libc6 (>= 2.4)
Description: Interfaces for Python3
 This package provides an implementation of object interfaces for Python.
 Interfaces are a mechanism for labeling objects as conforming to a given API
 or contract. So, this package can be considered as implementation of the
 Design By Contract methodology support in Python.
 .
 This is the Python 3 version.
Homepage: https://github.com/zopefoundation/zope.interface
Original-Maintainer: Debian Python Team <[email protected]>

Package: python3.12
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 738
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Version: 3.12.3-1ubuntu0.13
Depends: python3.12-minimal (= 3.12.3-1ubuntu0.13), libpython3.12-stdlib (= 3.12.3-1ubuntu0.13), media-types | mime-support, tzdata
Recommends: ca-certificates
Suggests: python3.12-venv, python3.12-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.12)
 Python is a high-level, interactive, object-oriented language. Its 3.12 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3.12-dev
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 502
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: python3.12
Version: 3.12.3-1ubuntu0.13
Depends: python3.12 (= 3.12.3-1ubuntu0.13), libpython3.12-dev (= 3.12.3-1ubuntu0.13), libpython3.12t64 (= 3.12.3-1ubuntu0.13)
Recommends: libc6-dev | libc-dev
Description: Header files and a static library for Python (v3.12)
 Header files, a static library and development tools for building
 Python (v3.12) modules, extending the Python interpreter or embedding
 Python (v3.12) in applications.
 .
 Maintainers of Python packages should read README.maintainers.
Original-Maintainer: Matthias Klose <[email protected]>

Package: python3.12-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 7927
Maintainer: Ubuntu Core Developers <[email protected]>
Architecture: amd64
Multi-Arch: allowed
Source: python3.12
Version: 3.12.3-1ubuntu0.13
Depends: libpython3.12-minimal (= 3.12.3-1ubuntu0.13), libexpat1 (>= 2.6.0), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.38)
Recommends: python3.12
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.12)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.12-minimal/README.Debian for a list of the modules
 contained in this package.
Cnf-Visible-Pkgname: python3.12
Original-Maintainer: Matthias Klose <[email protected]>

Package: quota
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1204
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.06-1build6
Depends: libc6 (>= 2.38), libdbus-1-3 (>= 1.9.14), libext2fs2t64 (>= 1.37), libldap2 (>= 2.6.2), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtirpc3t64 (>= 1.0.2), libwrap0 (>= 7.6-4~), debconf (>= 1.2.9) | debconf-2.0, lsb-base (>= 3.2-13)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: libnet-ldap-perl, rpcbind, default-mta | mail-transport-agent
Conffiles:
 /etc/cron.daily/quota 9dbc1b48f4cf43e1c6fb3b54d3e1ebe6
 /etc/default/quota 0dd01986a1b7fa36e5686fb04229335d
 /etc/init.d/quota 58893fd94e8131fda9cdeb55bd546ace
 /etc/init.d/quotarpc b55c0ee510b092d1fcb9ed918a8de9c2
 /etc/quotagrpadmins 0b4a5484e590fea00f9949d6e298a659
 /etc/quotatab a930a2a1992adf72a6d7e50267e674e4
 /etc/warnquota.conf 30a0b7cc5463fa9f39388ebb00ffa82d
Description: disk quota management tools
 This package provides the standard set of utilities for manipulating
 file system usage caps via the Linux Diskquota system. It can set hard
 or soft limits with adjustable grace periods on block or inode usage for
 users and groups. It allows users to check their quota status,
 integrates with LDAP, and supports quotas on remote machines via NFS.
Homepage: http://sourceforge.net/projects/linuxquota
Original-Maintainer: Michael Meskes <[email protected]>

Package: readline-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 77
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 8.2-4build1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html
Original-Maintainer: Matthias Klose <[email protected]>

Package: redis
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 36
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 5:7.0.15-1ubuntu0.24.04.4
Depends: redis-server (<< 5:7.0.15-1ubuntu0.24.04.4.1~), redis-server (>= 5:7.0.15-1ubuntu0.24.04.4)
Description: Persistent key-value database with network interface (metapackage)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.
 .
 This package depends on the redis-server package.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <[email protected]>

Package: redis-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 183
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: redis
Version: 5:7.0.15-1ubuntu0.24.04.4
Depends: redis-tools (= 5:7.0.15-1ubuntu0.24.04.4), sysvinit-utils
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/redis-server 36255dd86b15accc2acd4db7f5e21f05
 /etc/init.d/redis-server 2a51c7aa28acf5d7244352e80d0b26ff
 /etc/logrotate.d/redis-server 420ce1e139dd2044c4a3e44a2781a0a3
 /etc/redis/redis.conf 3f070d8d3ef55ec295f647bec0cd3326
Description: Persistent key-value database with network interface
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <[email protected]>

Package: redis-tools
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 6333
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: redis
Version: 5:7.0.15-1ubuntu0.24.04.4
Replaces: redis-server (<< 2:2.6.16-1)
Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.38), libjemalloc2 (>= 3.5.0), liblzf1 (>= 1.5), libssl3t64 (>= 3.0.0), libsystemd0
Suggests: ruby-redis
Breaks: redis-server (<< 2:2.6.16-1)
Description: Persistent key-value database with network interface (client)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 This package contains the command line client and other tools.
Homepage: https://redis.io/
Original-Maintainer: Chris Lamb <[email protected]>

Package: rpcsvc-proto
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.2-0ubuntu7
Replaces: libc6-dev (<< 2.32), libc6-dev-bin (<< 2.32)
Depends: libc6 (>= 2.38)
Breaks: libc6-dev (<< 2.32), libc6-dev-bin (<< 2.32)
Description: RPC protocol compiler and definitions
 rpcgen is a tool that generates C code to implement an RPC protocol. The input
 to rpcgen is a language similar to C known as RPC Language (Remote Procedure
 Call Language).
 .
 This package also includes several rpcsvc header files and RPC protocol
 definitions from SunRPC sources that were previously shipped by glibc.
Homepage: https://github.com/thkukuk/rpcsvc-proto
Original-Maintainer: GNU Libc Maintainers <[email protected]>

Package: rspamd
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 13544
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.8.1-1ubuntu3
Depends: adduser, ca-certificates, fonts-glyphicons-halflings, libjs-bootstrap4, libjs-jquery, libjs-requirejs, perl:any, libc6 (>= 2.38), libgcc-s1 (>= 4.2), libglib2.0-0t64 (>= 2.75.3), libhyperscan5 (>= 5.4.2), libicu74 (>= 74.1-1~), libluajit-5.1-2 (>= 2.0.4+dfsg) | libluajit2-5.1-2 (>= 2.1~), libpcre2-8-0 (>= 10.22), libsodium23 (>= 0.6.1), libsqlite3-0 (>= 3.7.15), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), zlib1g (>= 1:1.2.0)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: redis-server
Conffiles:
 /etc/init.d/rspamd 8de0e2640609be5fd583083bbfad42ab
 /etc/logrotate.d/rspamd 18029c7c8840e0e3131f3934528876b7
 /etc/rspamd/actions.conf e9699a495c64af0863192c3af8e635c1
 /etc/rspamd/cgp.inc 7980322de9786ee5ffbf19869c45f25f
 /etc/rspamd/common.conf c709de180d15a1580f105a28a38f2815
 /etc/rspamd/composites.conf 621e5a81b23fa3565051667dd301735d
 /etc/rspamd/groups.conf 6d1e67f401ebe30a833e2eac78c91eaf
 /etc/rspamd/lang_detection.inc 393c8cc8144c10787c17a847882e305b
 /etc/rspamd/logging.inc 24a0350385ef6e81cf994c31bddd01c3
 /etc/rspamd/maps.d/dmarc_whitelist.inc ee5a347e94f7ee83123624ed1b92d9a5
 /etc/rspamd/maps.d/maillist.inc 54353f3b606e522a30768534ba735c27
 /etc/rspamd/maps.d/mid.inc 7460d4d841d97161d8bf0587ffd8d4f7
 /etc/rspamd/maps.d/mime_types.inc 96bd64f7fe8d83da6a3ebdcb618ffc29
 /etc/rspamd/maps.d/redirectors.inc 21a9bc8002cb3546a00a48e8ed0a8d5d
 /etc/rspamd/maps.d/spf_dkim_whitelist.inc 47859ade95de5e9b8ae50cda5acc7d8f
 /etc/rspamd/maps.d/surbl-whitelist.inc b290ced48339c1fec51b3eb32748902d
 /etc/rspamd/metrics.conf 58a1236d7cad0668fe4c83ef79585ccf
 /etc/rspamd/modules.conf b85a565766e9bfa7130f94d87ce8478b
 /etc/rspamd/modules.d/antivirus.conf 11fab2b5bea55b8996038e48494209c6
 /etc/rspamd/modules.d/arc.conf 69b8601f474d69c40068d5636652f336
 /etc/rspamd/modules.d/asn.conf ec35691ec71b7919a723761a4ee5f7db
 /etc/rspamd/modules.d/aws_s3.conf f28cbf7f9bbb0c5c785aef08778dd1fc
 /etc/rspamd/modules.d/bimi.conf 8584732ba03fb74c86199f84ae414975
 /etc/rspamd/modules.d/chartable.conf 3fef71d6d7fb722c6d094d809186f4ce
 /etc/rspamd/modules.d/clickhouse.conf d7c5f4bbb0e45a453d5c199beab6e78d
 /etc/rspamd/modules.d/dcc.conf dcc9ebd905eeaf82c654579eb98e03f1
 /etc/rspamd/modules.d/dkim.conf bce0813c813248949704c11a82a87715
 /etc/rspamd/modules.d/dkim_signing.conf 205f78a57e9e773e6a4c3fb1dbfa16f1
 /etc/rspamd/modules.d/dmarc.conf c9d44c1b113474280b2206001e376098
 /etc/rspamd/modules.d/elastic.conf f35788bc8b504bbde434601a3f652344
 /etc/rspamd/modules.d/emails.conf c86b8d153373f9e4d418e377415a32d6
 /etc/rspamd/modules.d/external_relay.conf a99d1997d3763b640aa62d5cf4e56008
 /etc/rspamd/modules.d/external_services.conf 4062e9b866b99d1f9cdad4ca528148c8
 /etc/rspamd/modules.d/force_actions.conf 2d711c250f2a4511548b0e7502936d7e
 /etc/rspamd/modules.d/forged_recipients.conf f496c348ebb6d477e54b830e62e86d35
 /etc/rspamd/modules.d/fuzzy_check.conf 49542096a63cf1d15adf8d9fbe03f575
 /etc/rspamd/modules.d/greylist.conf d1420de83345618d1f300c7c1573c598
 /etc/rspamd/modules.d/hfilter.conf 63ac80b33046062554a834cb55d07462
 /etc/rspamd/modules.d/history_redis.conf 2603a0ae0f99dd9d1226dcd805c804ab
 /etc/rspamd/modules.d/http_headers.conf c675df74f5a24c227dd0616a46394149
 /etc/rspamd/modules.d/known_senders.conf b0b0afb8d56d8aee655bf66c9d7ba029
 /etc/rspamd/modules.d/maillist.conf f1641032d2054cfa66ba931a273818ca
 /etc/rspamd/modules.d/metadata_exporter.conf 8b2b51ea79414b3f720d7b39c5118b1f
 /etc/rspamd/modules.d/metric_exporter.conf 891443e512acef1553685ecc66194f8c
 /etc/rspamd/modules.d/mid.conf 1e81104ab3aa5783ccc650d736471626
 /etc/rspamd/modules.d/milter_headers.conf 614c0816c931ef8c457cfa37feefcffb
 /etc/rspamd/modules.d/mime_types.conf 52e38629580521d75ca9bdb5d543ec41
 /etc/rspamd/modules.d/multimap.conf 62f90e2486de64fee59b5d49323c9280
 /etc/rspamd/modules.d/mx_check.conf 78ef007440529fbecc253e59b413752a
 /etc/rspamd/modules.d/neural.conf d83d0e93a9e456348cc6c6e97f41ede3
 /etc/rspamd/modules.d/once_received.conf 178c4088041cbd9b1ab4f135f0f9ba7b
 /etc/rspamd/modules.d/p0f.conf b30e68a73ee3421f3641ebea1ad14f1f
 /etc/rspamd/modules.d/phishing.conf c3507cc6d37133e451b714ff178f9697
 /etc/rspamd/modules.d/ratelimit.conf 53e6bfd1801d6c9c0276e7b21e61ed1c
 /etc/rspamd/modules.d/rbl.conf 1d9de757d39e0899a7ffebe99292d1cc
 /etc/rspamd/modules.d/redis.conf fd9755e7e0196860caa9cf190f28a647
 /etc/rspamd/modules.d/regexp.conf f16aa9344f69ba482b90281c48a33656
 /etc/rspamd/modules.d/replies.conf cb797fd956fdc0786dc5bdea3694565a
 /etc/rspamd/modules.d/reputation.conf 0b3375e7d8a95d76d01339c35728c8bf
 /etc/rspamd/modules.d/rspamd_update.conf f57eb79205b3840658be15223158c983
 /etc/rspamd/modules.d/spamassassin.conf b7a2f37fca5f3d3460d8628670e095e2
 /etc/rspamd/modules.d/spamtrap.conf 4c62f2660ff8ad3acce47d344a222292
 /etc/rspamd/modules.d/spf.conf 652ee79ceaf8662390738cb23fe7b885
 /etc/rspamd/modules.d/surbl.conf 94138f03ca3f81a46603ec93f888e12c
 /etc/rspamd/modules.d/trie.conf 4faaec603a831e00b3c683f6b3d6d3e2
 /etc/rspamd/modules.d/url_redirector.conf 100f3263f053dcb67bfb2b4518eb62c3
 /etc/rspamd/modules.d/whitelist.conf 3b1d97f60a85fc544e863dfb1a255483
 /etc/rspamd/options.inc 2fbf771d40eebfc94c9ab0eea0dd6f0c
 /etc/rspamd/rspamd.conf 6c5bf2891a956ec55f41e22de30210ad
 /etc/rspamd/scores.d/content_group.conf 8b5bb19d101572ccab095ff4e0e59b8b
 /etc/rspamd/scores.d/fuzzy_group.conf 5c95fc6f3eb6e3735a28b5f9ff090578
 /etc/rspamd/scores.d/headers_group.conf 1a770a3049df48170ebd6cb4d7b8e78f
 /etc/rspamd/scores.d/hfilter_group.conf 3d5953758a4906d5e58bdfd154f5bec1
 /etc/rspamd/scores.d/mime_types_group.conf edf19b884ad03f04589355a60fe84579
 /etc/rspamd/scores.d/mua_group.conf c5790e75457e1f94bf034e49d199b4d7
 /etc/rspamd/scores.d/phishing_group.conf a9e455fd01e4f05bd7f6278197509bee
 /etc/rspamd/scores.d/policies_group.conf 3f24d6976bba6ba500015b175368a382
 /etc/rspamd/scores.d/rbl_group.conf f31447a5dac87d93e5f4d768b32e546d
 /etc/rspamd/scores.d/statistics_group.conf b8bd047b38a664eda0c9a8a88de3d686
 /etc/rspamd/scores.d/subject_group.conf b8a4a353505dcde0db86258ba5e29483
 /etc/rspamd/scores.d/surbl_group.conf 198abf035dfffa618cf49ccef83f7b61
 /etc/rspamd/scores.d/whitelist_group.conf d04dbd03a1ecadbc528a69df225a4661
 /etc/rspamd/settings.conf 58413bb1273fb65ea6b32dbe80c92e92
 /etc/rspamd/statistic.conf 984b442f40474520e409ea7bce1ed443
 /etc/rspamd/worker-controller.inc 3330ad0f8b56f57ea4ebd0e2ac19312b
 /etc/rspamd/worker-fuzzy.inc bd24654d4a4e0330d7ca9ce35a882e34
 /etc/rspamd/worker-normal.inc a78328df06253cdb1cd3f2b41d5ad878
 /etc/rspamd/worker-proxy.inc 9829d23ca02827c995e22a9f17489eef
Description: Rapid spam filtering system
 Rspamd is a rapid, modular and lightweight spam filter. It is designed to work
 with big amount of mail and can be easily extended with own filters written in
 Lua.
Homepage: https://rspamd.com
Original-Maintainer: Sebastien Badia <[email protected]>

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 801
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.2.7-1ubuntu1.5
Depends: lsb-base, libacl1 (>= 2.2.23), libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3t64 (>= 3.0.0), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: openssh-client, openssh-server, python3, python3-braceexpand
Conffiles:
 /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: https://rsync.samba.org/
Original-Maintainer: Paul Slootman <[email protected]>

Package: rsyslog
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1775
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 8.2312.0-3ubuntu9.2
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.38), libestr0 (>= 0.1.9), libfastjson4 (>= 0.99.8), libsystemd0 (>= 246), libuuid1 (>= 2.16), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4), adduser, ucf
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-openssl | rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp, apparmor (>= 2.8.96~2541-0ubuntu4~)
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/apparmor.d/rsyslog.d/README 85ad3bd22e3539dff283a25c3c4e118e
 /etc/apparmor.d/usr.sbin.rsyslogd 7ef2aceb54c8998f1154595048fa8771
 /etc/logcheck/ignore.d.server/rsyslog 58c2337cacd6a3296c2c9728fc3e52fd
 /etc/logrotate.d/rsyslog 3f26282ac0106961634fe4efb9edc3f4
 /etc/rsyslog.conf a14b59f17abdcfda417f99a99c030e67
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: https://www.rsyslog.com/
Original-Maintainer: Michael Biebl <[email protected]>

Package: run-one
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 29
Maintainer: Dustin Kirkland <[email protected]>
Architecture: all
Version: 1.17-0ubuntu2
Replaces: bikeshed (<< 1.8)
Depends: procps
Breaks: bikeshed (<< 1.8)
Enhances: anacron, cron
Description: run just one instance of a command and its args at a time
 This utility will run just one instance at a time of some command and
 unique set of arguments (useful for cronjobs, eg).
Homepage: http://launchpad.net/run-one

Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 996
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.9.1-1ubuntu1
Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libtinfo6 (>= 6), libutempter0 (>= 1.1.5), debianutils (>= 5.3-1~)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
 /etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
 /etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
 GNU Screen is a terminal multiplexer that runs several separate "screens" on
 a single physical character-based terminal. Each virtual terminal emulates a
 DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
 can be detached and resumed later on a different terminal.
 .
 Screen also supports a whole slew of other features, including configurable
 input and output translation, serial port support, configurable logging,
 and multi-user support.
Homepage: https://savannah.gnu.org/projects/screen
Original-Maintainer: Axel Beckert <[email protected]>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 340
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9-2ubuntu0.24.04.1
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/
Original-Maintainer: Clint Adams <[email protected]>

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 63
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.0.22
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, pager, or terminal emulator.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager sensible-terminal
Original-Maintainer: Anibal Monsalve Salazar <[email protected]>

Package: session-migration
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 49
Maintainer: Didier Roche <[email protected]>
Architecture: amd64
Version: 0.3.9build1
Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.51.1), init-system-helpers (>= 1.52)
Description: Tool to migrate in user session settings
 This tool is used to migrate in session user data when a program is evolving
 its configuration, or needing to have files moved and so on.
 .
 This program is generally autostarted at the very beginning of the session
 and integrates caching capability.
Homepage: https://launchpad.net/session-migration

Package: sg3-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2799
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.46-3ubuntu4
Replaces: sg-utils
Depends: libc6 (>= 2.38), libsgutils2-1.46-2 (>= 1.46)
Conflicts: cdwrite, sg-utils
Description: utilities for devices using the SCSI command set
 Most OSes have SCSI pass-through interfaces that enable user space programs
 to send SCSI commands to a device and fetch the response. With SCSI to ATA
 Translation (SAT) many ATA disks now can process SCSI commands. Typically
 each utility in this package implements one SCSI command. See the draft
 standards at www.t10.org for SCSI command definitions plus SAT. ATA
 commands are defined in the draft standards at www.t13.org . For a mapping
 between supported SCSI and ATA commands and utility names in this package
 see the COVERAGE file.
Homepage: https://sg.danny.cz/sg/
Original-Maintainer: Ritesh Raj Sarraf <[email protected]>

Package: sg3-utils-udev
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 31
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: sg3-utils
Version: 1.46-3ubuntu4
Depends: sg3-utils, initramfs-tools-core, initramfs-tools | linux-initramfs-tool
Description: utilities for devices using the SCSI command set (udev rules)
 Most OSes have SCSI pass-through interfaces that enable user space programs
 to send SCSI commands to a device and fetch the response. With SCSI to ATA
 Translation (SAT) many ATA disks now can process SCSI commands. Typically
 each utility in this package implements one SCSI command. See the draft
 standards at www.t10.org for SCSI command definitions plus SAT. ATA
 commands are defined in the draft standards at www.t13.org . For a mapping
 between supported SCSI and ATA commands and utility names in this package
 see the COVERAGE file.
 .
 udev rules which are associated with the utilities in the sg3-utils package.
Homepage: https://sg.danny.cz/sg/
Original-Maintainer: Ritesh Raj Sarraf <[email protected]>

Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 66
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.31
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory.
Original-Maintainer: Debian QA Group <[email protected]>

Package: shared-mime-info
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 2852
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.4-4
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libglib2.0-0t64 (>= 2.75.3), libstdc++6 (>= 9), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and Xfce use this database.
Original-Maintainer: Debian freedesktop.org maintainers <[email protected]>
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info

Package: smartmontools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2159
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 7.4-2build1
Depends: debianutils (>= 2.2), sysvinit-utils (>= 3.05-4~), libc6 (>= 2.38), libcap-ng0 (>= 0.7.9), libgcc-s1 (>= 3.3.1), libselinux1 (>= 3.1~), libstdc++6 (>= 11), libsystemd0
Suggests: gsmartcontrol, smart-notifier, mailx | mailutils, curl | wget | lynx, gpg
Conflicts: smartsuite, ucsc-smartsuite
Conffiles:
 /etc/default/smartmontools 618f0c8e227d548c67eb09cfead5fd55
 /etc/init.d/smartmontools adb3ef22d28d58271e83afd120df6bce
 /etc/smartd.conf b8827f52d21210aad15a77913872c929
 /etc/smartmontools/run.d/10mail 07e70aa86dcab3b2c7205254e3e942e2
Description: control and monitor storage systems using S.M.A.R.T.
 The smartmontools package contains two utility programs (smartctl and smartd)
 to control and monitor storage systems using the Self-Monitoring, Analysis and
 Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI
 hard disks. It is derived from the smartsuite package, and includes support
 for ATA/ATAPI-5 disks. It should run on any modern Linux system.
Homepage: https://www.smartmontools.org/
Original-Maintainer: Dmitry Smirnov <[email protected]>

Package: snapd
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 126644
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.74.1+ubuntu24.04.4
Replaces: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Depends: adduser, apparmor (>= 2.10.95-0ubuntu2.2), ca-certificates, fuse3 (>= 3.10.5-1) | fuse, libcap2-bin, openssh-client, squashfs-tools, systemd, udev, default-dbus-session-bus | dbus-session-bus, libblkid1 (>= 2.17.2), libc6 (>= 2.38), libfuse3-3 (>= 3.12.0), liblzma5 (>= 5.1.1alpha+20120614), liblzo2-2 (>= 2.02), libudev1 (>= 183), zlib1g (>= 1:1.1.4)
Recommends: gnupg
Suggests: zenity | kdialog
Breaks: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Conflicts: snap (<< 2013-11-29-1ubuntu1)
Conffiles:
 /etc/apparmor.d/usr.lib.snapd.snap-confine.real 33706841d80331efd8abecc04fdefe08
 /etc/apt/apt.conf.d/20snapd.conf dd6f6ce79792eecd4a57bdde4e6fff7d
 /etc/profile.d/apps-bin-path.sh 5d9366468bcab036e3c30fd5c8a6e98e
 /etc/xdg/autostart/snap-userd-autostart.desktop 4aaaa2fe36462a072a72e09cad553362
Description: Daemon and tooling that enable snap packages
 Install, configure, refresh and remove snap packages. Snaps are
 'universal' packages that work across many different Linux systems,
 enabling secure distribution of the latest apps and utilities for
 cloud, servers, desktops and the internet of things.
 .
 Start with 'snap list' to see installed snaps.
Built-Using: apparmor (= 4.0.1really4.0.1-0ubuntu0.24.04.6), libcap2 (= 1:2.66-5ubuntu2.2), libseccomp (= 2.5.5-1ubuntu3.1)
Homepage: https://github.com/snapcore/snapd

Package: socat
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1610
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.8.0.0-4build3
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libwrap0 (>= 7.6-4~)
Description: multipurpose relay for bidirectional data transfer
 Socat (for SOcket CAT) establishes two bidirectional byte streams
 and transfers data between them. Data channels may be files, pipes,
 devices (terminal or modem, etc.), or sockets (Unix, IPv4, IPv6, raw,
 UDP, TCP, SSL). It provides forking, logging and tracing, different
 modes for interprocess communication and many more options.
 .
 It can be used, for example, as a TCP relay (one-shot or daemon),
 as an external socksifier, as a shell interface to Unix sockets,
 as an IPv6 relay, as a netcat and rinetd replacement, to redirect
 TCP-oriented programs to a serial line, or to establish a relatively
 secure environment (su and chroot) for running client or server shell
 scripts inside network connections. Socat supports sctp as of 1.7.0.
Homepage: https://www.dest-unreach.org/socat/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: software-properties-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 192
Maintainer: Michael Vogt <[email protected]>
Architecture: all
Source: software-properties
Version: 0.99.49.4
Replaces: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Depends: ca-certificates, gir1.2-glib-2.0, gir1.2-packagekitglib-1.0 (>= 1.1.0-2), packagekit, python-apt-common (>= 0.9), python3, python3-dbus, python3-gi, python3-software-properties (= 0.99.49.4), python3:any
Breaks: python-software-properties (<< 0.85), python3-software-properties (<< 0.85)
Conffiles:
 /etc/dbus-1/system.d/com.ubuntu.SoftwareProperties.conf cc3c01a5b5e8e05d40c9c075f44c43ea
Description: manage the repositories that you install software from (common)
 This software provides an abstraction of the used apt repositories.
 It allows you to easily manage your distribution and independent software
 vendor software sources.
 .
 This package contains the common files for software-properties like the
 D-Bus backend.

Package: sosreport
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2231
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 4.10.2-0ubuntu0~24.04.1
Depends: python3-magic, python3-packaging, python3-pexpect, python3-yaml, python3:any
Recommends: gpg, python3-boto3
Conffiles:
 /etc/sos/sos.conf 069810110a802e88fe7d67f3be6fb07f
Description: Set of tools to gather troubleshooting data from a system
 Sos is a set of tools that gathers information about system
 hardware and configuration. The information can then be used for
 diagnostic purposes and debugging. Sos is commonly used to help
 support technicians and developers.
Homepage: https://github.com/sosreport/sos
Original-Maintainer: Nikhil Kshirsagar <[email protected]>

Package: sqlite3
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 570
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.45.1-1ubuntu2.5
Depends: libc6 (>= 2.34), libreadline8t64 (>= 6.0), libsqlite3-0 (= 3.45.1-1ubuntu2.5), zlib1g (>= 1:1.2.0)
Suggests: sqlite3-doc
Description: Command line interface for SQLite 3
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: squashfs-tools
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 473
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1:4.6.1-1build1
Depends: libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), liblzo2-2 (>= 2.02), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: Tool to create and append to squashfs filesystems
 Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib
 compression to compress both files, inodes and directories. Inodes in the
 system are very small and all blocks are packed to minimise data overhead.
 Block sizes greater than 4K are supported up to a maximum of 64K.
 .
 Squashfs is intended for general read-only filesystem use, for archival use
 (i.e. in cases where a .tar.gz file may be used), and in constrained block
 device/memory systems (e.g. embedded systems) where low overhead is needed.
Homepage: https://github.com/plougher/squashfs-tools
Original-Maintainer: Laszlo Boszormenyi (GCS) <[email protected]>

Package: sse3-support
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 17
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: isa-support
Version: 21build1
Pre-Depends: isa-support (= 21build1)
Description: CPU feature checking - require SSE3
 The packages in the isa-support family probe for microprocessor Instruction
 Set Architecture features such as SSE3. By refusing to install on machines
 lacking a required feature, they allow ISA requirements to be handled in
 terms of package dependencies.
 .
 This is a mostly dummy package which checks for SSE3 and refuses to install
 on unsupported hardware.
 .
 Streaming SIMD Extensions (SSE) is a single instruction, multiple data
 (SIMD) instruction set extension.
 .
 SSE3, also called PNI (Prescott New Instructions), is an incremental upgrade
 to SSE2, adding a handful of new operations useful for processing media. It
 is available on almost any 64-bit-capable processor except for some early
 AMD models (Sledgehammer and Clawhammer), but is not available on most
 32-bit-only hardware.
Original-Maintainer: Bastien Roucariès <[email protected]>

Package: ssh-import-id
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 50
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 5.11-0ubuntu2.24.04.1
Depends: ca-certificates, openssh-client, python3-distro, python3-launchpadlib, wget, python3:any
Recommends: openssh-server
Conffiles:
 /etc/ssh/ssh_import_id 8bfa390040fbeeae70bec14f2dccaf11
Description: securely retrieve an SSH public key and install it locally
 This utility will securely contact a public keyserver (Launchpad.net by
 default, but Github.com is also supported), retrieve one or more user's
 public keys, and append these to the current user's ~/.ssh/authorized_keys
 file.
Homepage: http://launchpad.net/ssh-import-id
Original-Maintainer: Andrew Starr-Bochicchio <[email protected]>

Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 66
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1.1.2ubuntu1
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.
Original-Maintainer: Debian Apache Maintainers <[email protected]>

Package: strace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2103
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 6.8-0ubuntu2
Depends: libc6 (>= 2.38), libunwind8
Description: System call tracer
 strace is a system call tracer: i.e. a debugging tool which prints out
 a trace of all the system calls made by another process/program.
 The program to be traced need not be recompiled for this, so you can
 use it on binaries for which you don't have source.
 .
 System calls and signals are events that happen at the user/kernel
 interface. A close examination of this boundary is very useful for bug
 isolation, sanity checking and attempting to capture race conditions.
Homepage: https://strace.io
Original-Maintainer: Steve McIntyre <[email protected]>

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3468
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9.15p5-3ubuntu5.24.04.2
Replaces: sudo-ldap
Depends: libapparmor1 (>= 2.7.0~beta1+bzr1772), libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.0.2), libpam-modules
Conflicts: sudo-ldap
Conffiles:
 /etc/pam.d/sudo b3a1b916bf62a2cc3280f7f9b94844ff
 /etc/pam.d/sudo-i ce9740f66cedf7716e26950abfe556fa
 /etc/sudo.conf 8c714b777580faea54a2eb6d5f17ad1d
 /etc/sudo_logsrvd.conf ad0ba586da300ae3ba46312ad744a6e2
 /etc/sudoers 8c20cd717552790f2312db0981337945
 /etc/sudoers.d/README bb1eba13940f331e91cfb9294d86a04f
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: https://www.sudo.ws/
Original-Maintainer: Sudo Maintainers <[email protected]>

Package: sysstat
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1452
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 12.6.1-2
Depends: ucf (>= 2.003), xz-utils, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libsensors5 (>= 1:3.5.0)
Recommends: systemd | cron | cron-daemon
Suggests: isag
Conffiles:
 /etc/cron.d/sysstat 455c3c071b6daabb4e4490828975034c
 /etc/cron.daily/sysstat 200a6578eb7a7da30665b913e2559f61
 /etc/init.d/sysstat d25b89308163baa0f9844757e098dd33
 /etc/sysstat/sysstat 6c424252786467d54de68358bfcc1e29
 /etc/sysstat/sysstat.ioconf 44a026e04113b01f748e6a9414391d37
Description: system performance tools for Linux
 The sysstat package contains the following system performance tools:
  - sar: collects and reports system activity information;
  - iostat: reports CPU utilization and disk I/O statistics;
  - tapestat: reports statistics for tapes connected to the system;
  - mpstat: reports global and per-processor statistics;
  - pidstat: reports statistics for Linux tasks (processes);
  - sadf: displays data collected by sar in various formats;
  - cifsiostat: reports I/O statistics for CIFS filesystems.
 .
 The statistics reported by sar deal with I/O transfer rates,
 paging activity, process-related activities, interrupts,
 network activity, memory and swap space utilization, CPU
 utilization, kernel activities and TTY statistics, among
 others. Both UP and SMP machines are fully supported.
Original-Maintainer: Robert Luberda <[email protected]>
Homepage: https://sysstat.github.io/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 11748
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 255.4-1ubuntu8.16
Replaces: systemd-repart (<< 250.2-3~)
Provides: systemd-repart (= 255.4-1ubuntu8.16), systemd-sysusers (= 255.4-1ubuntu8.16), systemd-tmpfiles (= 255.4-1ubuntu8.16)
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libaudit1 (>= 1:2.2.1), libcryptsetup12 (>= 2:2.4), libfdisk1 (>= 2.33), libkmod2 (>= 15), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libsystemd-shared (= 255.4-1ubuntu8.16), libsystemd0 (= 255.4-1ubuntu8.16), systemd-dev (>= 255.4-1ubuntu8.16), mount
Pre-Depends: libblkid1 (>= 2.30.2), libc6 (>= 2.39), libcap2 (>= 1:2.10), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.30), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5)
Recommends: default-dbus-system-bus | dbus-system-bus, networkd-dispatcher, systemd-timesyncd | time-daemon, systemd-resolved
Suggests: systemd-container, systemd-homed, systemd-userdbd, systemd-boot, libfido2-1, libip4tc2, libp11-kit0, libqrencode4, libtss2-esys-3.0.2-0, libtss2-mu-4.0.1-0, libtss2-rc0, libtss2-tcti-device0, polkitd
Breaks: dracut (<< 059-5), less (<< 563), sicherboot (<< 0.1.6), systemd-repart (<< 250.2-3~)
Conflicts: consolekit, libpam-ck-connector, opensysusers, systemd-shim
Conffiles:
 /etc/systemd/journald.conf 75b80e6a9f99a86a34e4772d6a98cd15
 /etc/systemd/logind.conf 224fc79c1fee69b72ed4def02967ac6b
 /etc/systemd/networkd.conf 189a57178c5ba90358b5e60b0afed34b
 /etc/systemd/pstore.conf 8086c035fbf3bde72f2339a6ee50d2a4
 /etc/systemd/sleep.conf a73525164051d35ff700a76eb7db3f68
 /etc/systemd/system.conf c9f795de4c926f776ccb554b4e593f80
 /etc/systemd/user.conf c13845a7cbc3e115e4c23949a3e2b917
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/lib/systemd/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: systemd-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 722
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: systemd
Version: 255.4-1ubuntu8.16
Replaces: systemd (<< 253-2~), systemd-homed (<< 254.1-3~), udev (<< 253-2~)
Breaks: systemd (<< 253-2~), systemd-homed (<< 254.1-3~), udev (<< 253-2~)
Description: systemd development files
 This package contains the systemd and udev pkg-config files. Note that these
 are different from the libsystemd's and libudev's pkg-config files, which can
 still be found in the respective dev packages, but instead provide data such as
 the installation directories for units, and more.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: systemd-hwe-hwdb
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 19
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: systemd-hwe
Version: 255.1.7
Depends: udev
Description: udev rules for hardware enablement (HWE)
 systemd-hwe-hwdb contains hwdb rules for HWE on Ubuntu,
 which are not yet present in systemd.

Package: systemd-resolved
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 886
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 255.4-1ubuntu8.16
Replaces: resolvconf, systemd (<< 251.3-2~)
Provides: resolvconf
Depends: libc6 (>= 2.39), libssl3t64 (>= 3.0.0), libsystemd-shared (= 255.4-1ubuntu8.16), systemd (= 255.4-1ubuntu8.16), default-dbus-system-bus | dbus-system-bus
Suggests: polkitd
Breaks: systemd (<< 251.3-2~)
Conflicts: resolvconf
Conffiles:
 /etc/systemd/resolved.conf 34cadb9a0b5de37242f73c23ac354d05
Description: systemd DNS resolver
 This package provides systemd's DNS resolver and the command line tool to
 manage it.
 .
 Installing this package automatically overwrites /etc/resolv.conf and switches
 it to be managed by systemd-resolved.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 126
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 255.4-1ubuntu8.16
Replaces: sysvinit-core
Depends: systemd (= 255.4-1ubuntu8.16)
Pre-Depends: systemd
Recommends: libpam-systemd, libnss-systemd
Conflicts: bfh-container (<< 20211009-22~), file-rc, initscripts, molly-guard (<< 0.8.2~), orphan-sysvinit-scripts, progress-linux-container (<< 20221002-11~), systemd-shim, sysvinit-core
Description: system and service manager - SysV compatibility symlinks
 This package provides manual pages and compatibility symlinks needed for
 systemd to replace sysvinit.
 .
 Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: systemd-timesyncd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 203
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 255.4-1ubuntu8.16
Replaces: time-daemon
Provides: time-daemon
Depends: libc6 (>= 2.34), libsystemd-shared (= 255.4-1ubuntu8.16), systemd
Conflicts: time-daemon
Conffiles:
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd 1f941d2a11991ff151fe74064f2b5cf4
 /etc/systemd/timesyncd.conf e0877ff040d9c2541955eb1c1e856031
Description: minimalistic service to synchronize local time with NTP servers
 The package contains the systemd-timesyncd system service that may be used to
 synchronize the local system clock with a remote Network Time Protocol server.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 107
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 3.08-6ubuntu3
Replaces: lsb-base
Provides: lsb-base (= 11.1.0)
Depends: libc6 (>= 2.38)
Conflicts: lsb-base (<< 11.3~)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 init-d-script, fstab-decode, killall5, pidof
 .
 It also contains the library scripts sourced by init-d-script and other
 initscripts that were formally in lsb-base.
Homepage: https://github.com/slicer69/sysvinit
Original-Maintainer: Debian sysvinit maintainers <[email protected]>

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 708
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.35+dfsg-3build1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Homepage: https://www.gnu.org/software/tar/
Original-Maintainer: Janos Lenart <[email protected]>

Package: tcpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 117
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: tcp-wrappers
Version: 7.6.q-33
Depends: libc6 (>= 2.34), libwrap0 (= 7.6.q-33)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <[email protected]>

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1313
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 4.99.4-3ubuntu4.24.04.1
Replaces: apparmor-profiles-extra (<< 1.12~)
Depends: adduser, libc6 (>= 2.38), libpcap0.8t64 (>= 1.9.1), libssl3t64 (>= 3.0.0)
Suggests: apparmor (>= 2.3)
Breaks: apparmor-profiles-extra (<< 1.12~)
Conffiles:
 /etc/apparmor.d/usr.bin.tcpdump e6c5b5c0c144de30d497c7843b69ad81
Description: command-line network traffic analyzer
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect attacks
 or to monitor network activities.
Homepage: https://www.tcpdump.org/
Original-Maintainer: Romain Francoise <[email protected]>

Package: thermald
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 575
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2.5.6-2ubuntu0.24.04.5
Depends: libc6 (>= 2.38), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libevdev2 (>= 0.9.1), libgcc-s1 (>= 3.3.1), libglib2.0-0t64 (>= 2.79.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 13.1), libupower-glib3 (>= 0.99.0), libxml2 (>= 2.7.4)
Conffiles:
 /etc/thermald/thermal-cpu-cdev-order.xml 6bbb6d648ba2c70b9635e843818beebb
 /etc/init/thermald.conf newconffile remove-on-upgrade
 /etc/thermald/thermal-cpu-cdev-order.xml 6bbb6d648ba2c70b9635e843818beebb
Description: Thermal monitoring and controlling daemon
 Thermal Daemon is a Linux daemon for monitoring and
 controlling platform temperatures. Once the system
 temperature reaches a certain threshold, the Linux daemon
 activates various cooling methods to try to cool the system.
Homepage: https://github.com/intel/thermal_daemon
Original-Maintainer: Colin Ian King <[email protected]>

Package: thin-provisioning-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1461
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 0.9.0-2ubuntu5.1
Depends: libaio1t64 (>= 0.3.93), libc6 (>= 2.38), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Description: Tools for handling thinly provisioned device-mapper meta-data
 This package contains tools to handle meta-data from the device-mapper
 thin target.  This target allows the use of a single backing store for multiple
 thinly provisioned volumes.  Numerous snapshots can be taken from such
 volumes.  The tools can check the meta-data for consistency, repair damaged
 information and dump or restore the meta-data in textual form.
Original-Maintainer: Debian LVM Team <[email protected]>

Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 126
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9-0.2build1
Depends: libc6 (>= 2.34)
Description: GNU time program for measuring CPU resource usage
 The 'time' command runs another program, then displays information
 about the resources used by that program, collected by the system while
 the program was running.  You can select which information is reported
 and the format in which it is shown, or have 'time' save the information
 in a file instead of display it on the screen.
 .
 The resources that 'time' can report on fall into the general
 categories of time, memory, I/O, and IPC calls.
 .
 The GNU version can format the output in arbitrary ways by using a
 printf-style format string to include various resource measurements.
Homepage: https://www.gnu.org/software/time
Original-Maintainer: Bob Proulx <[email protected]>

Package: tmux
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1160
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.4-1ubuntu0.1
Depends: libc6 (>= 2.38), libevent-core-2.1-7t64 (>= 2.1.8-stable), libsystemd0 (>= 221), libtinfo6 (>= 6.4+20230603), libtinfo6 (<< 6.5~), libutempter0 (>= 1.1.5)
Description: terminal multiplexer
 tmux enables a number of terminals (or windows) to be accessed and
 controlled from a single terminal like screen. tmux runs as a
 server-client system. A server is created automatically when necessary
 and holds a number of sessions, each of which may have a number of
 windows linked to it. Any number of clients may connect to a session,
 or the server may be controlled by issuing commands with tmux.
 Communication takes place through a socket, by default placed in /tmp.
 Moreover tmux provides a consistent and well-documented command
 interface, with the same syntax whether used interactively, as a key
 binding, or from the shell. It offers a choice of vim or Emacs key
 layouts.
Homepage: https://tmux.github.io/
Original-Maintainer: Romain Francoise <[email protected]>

Package: tpm-udev
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 28
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.6ubuntu1
Depends: adduser, udev
Description: udev rules for TPM modules
 This package provides udev rules for the TPM modules. Both TPM1 or TPM2 need
 this package to be installed to provide proper permissions of the TPM.
Original-Maintainer: Ying-Chun Liu (PaulLiu) <[email protected]>

Package: trace-cmd
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1419
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 3.2-1ubuntu2
Depends: libc6 (>= 2.38), libtraceevent1 (>= 1:1.5.1), libtracefs1 (>= 1.6.3), libzstd1 (>= 1.5.5), libtraceevent1-plugin
Suggests: kernelshark
Description: Utility for retrieving and analyzing function tracing in the kernel
 This package contains the trace-cmd utility. Trace-cmd makes it easy to
 retrieve and analyze function traces from the Linux kernel while it is running.
Original-Maintainer: Sudip Mukherjee <[email protected]>

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1391
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2026a-0ubuntu0.24.04.1
Replaces: tzdata-legacy (= 2023c-8ubuntu1)
Provides: tzdata-trixie
Depends: debconf (>= 0.5) | debconf-2.0
Breaks: tzdata-legacy (= 2023c-8ubuntu1)
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: https://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <[email protected]>

Package: ubuntu-drivers-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 285
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1:0.9.7.6ubuntu3.7
Replaces: jockey-common, jockey-gtk, jockey-kde, nvidia-common (<< 1:0.2.46)
Provides: jockey-common, jockey-gtk, jockey-kde, nvidia-common
Depends: python3:any (>= 3.2~), debconf (>= 0.5.00) | debconf-2.0, libc6 (>= 2.38), libdrm2 (>= 2.3.1), libkmod2 (>= 5~), libpci3 (>= 1:3.8.0), python3-apt, python3-xkit, python3-click, udev (>= 204-0ubuntu4~), pciutils, usbutils, kmod | module-init-tools
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: python3-aptdaemon.pkcompat
Breaks: nvidia-prime (<< 0.6)
Conflicts: jockey-common, jockey-gtk, jockey-kde, nvidia-common (<< 1:0.2.46)
Description: Detect and install additional Ubuntu driver packages
 This package aggregates and abstracts Ubuntu specific logic and knowledge
 about third-party driver packages. It provides:
 .
  - a Python API for detecting driver packages for a particular piece of
    hardware or the whole system.
 .
  - an "ubuntu-drivers" command line tool to list or install driver packages
    (mostly for integration in installers).
 .
  - some NVidia specific support code to find the most appropriate driver
    version, as well as setting up the alternatives symlinks that the
    proprietary NVidia and FGLRX packages use.

Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 29
Maintainer: Dimitri John Ledkov <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2023.11.28.1
Replaces: ubuntu-cloudimage-keyring (<< 2018.02.05)
Breaks: ubuntu-cloudimage-keyring (<< 2018.02.05)
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: ubuntu-mono
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 5567
Maintainer: Ubuntu Artwork Team <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: ubuntu-themes
Version: 24.04-0ubuntu1
Depends: adwaita-icon-theme, hicolor-icon-theme, humanity-icon-theme
Description: Ubuntu Mono Icon theme
 Dark and Light panel icons to make your desktop beautiful.
Homepage: https://launchpad.net/ubuntu-themes

Package: ubuntu-pro-client
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 1371
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: ubuntu-advantage-tools
Version: 37.2ubuntu~24.04
Replaces: ubuntu-advantage-tools (<< 31~)
Depends: python3-yaml, python3:any, libapt-pkg6.0t64 (>= 1.9~), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libjson-c5 (>= 0.15), libstdc++6 (>= 13.1), python3-apt, distro-info (>= 0.18ubuntu0.18.04.1), python3-pkg-resources
Recommends: ubuntu-pro-client-l10n
Breaks: python3-minimal (<< 3.12.3-0ubuntu2~), ubuntu-advantage-tools (<< 31~)
Conffiles:
 /etc/apparmor.d/ubuntu_pro_apt_news fc4246c45c221d8de8d878d444aeeb64
 /etc/apparmor.d/ubuntu_pro_esm_cache 53f295d80eefc7ab904dae7bbfa38d47
 /etc/apt/apt.conf.d/20apt-esm-hook.conf ed4125e83866ccfb557850b08042b4b1
 /etc/apt/preferences.d/ubuntu-pro-esm-apps 7e0d0e65835c9eda745c4a6d81e996e3
 /etc/apt/preferences.d/ubuntu-pro-esm-infra 4932ac7913fff2dadd94b9e832f636c8
 /etc/logrotate.d/ubuntu-pro-client 852ec664fd0f1ecb26e726f5e801e9fd
 /etc/ubuntu-advantage/uaclient.conf f84a9c135c3d556856f9ab6d2751e365
 /etc/update-manager/release-upgrades.d/ubuntu-advantage-upgrades.cfg 5e14da4979c6c68cef22c0c09f5d8793
 /etc/update-motd.d/91-contract-ua-esm-status 6346b049bc070e0519c621de0f636bb5
Description: Management tools for Ubuntu Pro
 Ubuntu Pro is a suite of additional services provided by Canonical on
 top of Ubuntu. Whether you're an enterprise customer deploying systems
 at scale or want security patching for your personal Ubuntu LTS
 at home, the Ubuntu Pro Client (pro) is the command-line tool that
 will help you manage the services you need.
Homepage: https://canonical-ubuntu-pro-client.readthedocs-hosted.com/

Package: ubuntu-pro-client-l10n
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 97
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: ubuntu-advantage-tools
Version: 37.2ubuntu~24.04
Depends: ubuntu-pro-client (= 37.2ubuntu~24.04)
Description: Translations for Ubuntu Pro Client
 This package delivers translations of Ubuntu Pro Client for various
 languages.
Homepage: https://ubuntu.com/advantage

Package: ubuntu-release-upgrader-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 268
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:24.04.28
Replaces: update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Depends: python3:any, python3-distupgrade (= 1:24.04.28), ca-certificates
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: software-properties (<< 0.9.27), update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Conffiles:
 /etc/update-manager/meta-release 25ba16c3215bff43f0272d3d93103f15
 /etc/update-manager/release-upgrades 54fd85e86c6bc2db8d7cc3c18013e3aa
 /etc/update-motd.d/91-release-upgrade 6147b099ff496ef5949d94451791bc4b
Description: manage release upgrades
 This is the core of the Ubuntu Release Upgrader

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 214
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 3.0043+nmu1
Depends: debconf (>= 0.5) | debconf-2.0, sensible-utils
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.
Original-Maintainer: Manoj Srivastava <[email protected]>

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 10853
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 255.4-1ubuntu8.16
Replaces: systemd (<< 255~rc1-4~)
Depends: libacl1 (>= 2.2.23), libblkid1 (>= 2.37.2), libc6 (>= 2.38), libcap2 (>= 1:2.10), libkmod2 (>= 15), libselinux1 (>= 3.1~), systemd | systemd-standalone-sysusers | systemd-sysusers, libudev1 (= 255.4-1ubuntu8.16), systemd-dev (>= 255.4-1ubuntu8.16)
Recommends: systemd-hwe-hwdb
Breaks: systemd (<< 255.4-1ubuntu8.16)
Conflicts: systemd (<< 255~rc1-4~)
Conffiles:
 /etc/udev/iocost.conf fad2a2c4c34d796b6802bc62c19cc4ae
 /etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <[email protected]>

Package: ufw
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 849
Maintainer: Jamie Strandboge <[email protected]>
Architecture: all
Version: 0.36.2-6
Depends: iptables, ucf, python3:any, debconf (>= 0.5) | debconf-2.0
Suggests: rsyslog
Breaks: iptables-persistent, netfilter-persistent
Conffiles:
 /etc/default/ufw a921dd9d167380b04de4bc911915ea44
 /etc/init.d/ufw f68c845ae88149c45d0d938394d7832f
 /etc/logrotate.d/ufw 969308e0ddfb74505f0da47b49ada218
 /etc/rsyslog.d/20-ufw.conf 98e2f72c9c65ca8d6299886b524e80d1
 /etc/ufw/sysctl.conf 7723079fc108eda8f57eddab3079c70a
Description: program for managing a Netfilter firewall
 The Uncomplicated FireWall is a front-end for iptables, to make managing a
 Netfilter firewall easier. It provides a command line interface with syntax
 similar to OpenBSD's Packet Filter. It is particularly well-suited as a
 host-based firewall.
Homepage: https://launchpad.net/ufw

Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 412
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Version: 2.9.1+nmu4ubuntu1
Depends: debconf (>= 0.5) | debconf-2.0, debconf, python3, python3-apt (>= 1.9.6~), python3-dbus, python3-distro-info, ucf, lsb-release, lsb-base, xz-utils
Recommends: systemd-sysv | cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart, powermgmt-base, python3-gi
Conffiles:
 /etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
 /etc/kernel/postinst.d/unattended-upgrades f296826482cb797aeef13554e093dbca
 /etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
 /etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
 /etc/update-motd.d/92-unattended-upgrades afa7546d3fe561e1f5783f7b9cf72096
Description: automatic installation of security upgrades
 This package can download and install security upgrades automatically
 and unattended, taking care to only install packages from the
 configured APT source, and checking for dpkg prompts about
 configuration file changes.
 .
 This script is the backend for the APT::Periodic::Unattended-Upgrade
 option.
Original-Maintainer: Michael Vogt <[email protected]>

Package: unminimize
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16
Maintainer: Utkarsh Gupta <[email protected]>
Architecture: amd64
Version: 0.2.1
Description: Un-minimize your minimial images or setup
 This package contains the unminimize script that helps the user in
 unminimizing their minimized images or cloud setup.

Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 375
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-28ubuntu4.1
Depends: libbz2-1.0, libc6 (>= 2.34)
Suggests: zip
Description: De-archiver for .zip files
 InfoZIP's unzip program. With the exception of multi-volume archives
 (ie, .ZIP files that are split across several disks using PKZIP's /& option),
 this can handle any file produced either by PKZIP, or the corresponding
 InfoZIP zip program.
 .
 This version supports encryption.
Homepage: https://infozip.sourceforge.net/UnZip.html
Original-Maintainer: Santiago Vila <[email protected]>

Package: update-inetd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 80
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 4.53
Depends: debconf (>= 0.5) | debconf-2.0, perl:any
Description: inetd configuration file updater
 This package provides a program used by other packages to
 automatically update /etc/inetd.conf, the configuration file shared
 by all implementations of the Internet super-server.
 .
 Note that xinetd is not supported by this package.
Original-Maintainer: Guillem Jover <[email protected]>

Package: update-manager-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 124
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Source: update-manager
Version: 1:24.04.12
Replaces: update-manager (<< 1:0.146.2)
Depends: distro-info-data, python3-distro-info, python3-update-manager (= 1:24.04.12), ubuntu-pro-client, ubuntu-release-upgrader-core (>= 1:18.04.9), python3:any
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: computer-janitor (<= 1.11-0ubuntu1), update-manager (<< 1:0.146.2)
Description: manage release upgrades
 This is the core of update-manager and the release upgrader

Package: update-notifier-common
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1515
Maintainer: Michael Vogt <[email protected]>
Architecture: all
Source: update-notifier
Version: 3.192.68.2
Replaces: update-notifier (<< 0.75.1)
Depends: python3:any, python3-apt, python3-dbus, python3-debian, python3-debconf | debconf (<< 1.5.64~), python3-distro-info, lsb-release, patch, update-manager-core (>= 1:17.04.2)
Pre-Depends: dpkg (>= 1.15.7.2), apt (>= 1.1~)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Suggests: policykit-1
Conffiles:
 /etc/apt/apt.conf.d/10periodic 03ddb526e156071de0667748b6ac1d33
 /etc/apt/apt.conf.d/15update-stamp b9de0ac9e2c9854b1bb213e362dc4e41
 /etc/apt/apt.conf.d/20archive 9e28a07261e6ad5ede22d5286291ca23
 /etc/apt/apt.conf.d/99update-notifier 8c8636b1123964162e9a1127f237ba7b
 /etc/update-motd.d/90-updates-available eaddabe4cbd443e9da6b14452b0a8fe5
 /etc/update-motd.d/95-hwe-eol 0205f1a3306acc0b76f0b0a0fb6462c3
 /etc/update-motd.d/98-fsck-at-reboot 16003ee8c8c80a565a98a7696cee04c0
 /etc/update-motd.d/98-reboot-required 1c4d534d0abd44d566899e47c4f22786
Description: Files shared between update-notifier and other packages
 Apt setup files and reboot notification scripts shared between
 update-notifier and other packages, notably for server use cases.

Package: upower
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 408
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.90.3-1
Depends: dbus, udev, libupower-glib3 (= 1.90.3-1), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.66), libgudev-1.0-0 (>= 238), libimobiledevice6 (>= 1.3.0), libplist-2.0-4 (>= 2.3.0)
Recommends: polkitd
Conffiles:
 /etc/UPower/UPower.conf 2b098b3a897395cf380f7b282eb97917
Description: abstraction for power management
 upower provides an interface to enumerate power sources on the system
 and control system-wide power management. Any application can access the
 org.freedesktop.UPower service on the system message bus. Some
 operations (such as suspending the system) are restricted using PolicyKit.
Original-Maintainer: Utopia Maintenance Team <[email protected]>
Homepage: https://upower.freedesktop.org/

Package: usb.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 724
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2024.03.18-1
Replaces: usbutils (<< 1:008-1)
Breaks: usbutils (<< 1:008-1)
Description: USB ID Repository
 This package contains the usb.ids file, a public repository of all known
 ID's used in USB devices: ID's of vendors, devices, subsystems and device
 classes. It is used in various programs to display full human-readable
 names instead of cryptic numeric codes.
Original-Maintainer: Aurelien Jarno <[email protected]>
Homepage: http://www.linux-usb.org/usb-ids.html

Package: usbutils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 321
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1:017-3build1
Depends: libc6 (>= 2.38), libudev1 (>= 196), libusb-1.0-0 (>= 2:1.0.22)
Suggests: usbutils-py
Breaks: hwdata (<< 0.334-1~), isenkram (<< 0.45~), kinfocenter (<< 4:5.14.5-2~), libosinfo-1.0-0 (<< 1.8.0-1~), usbip (<< 2.0+5.10.4-1~)
Description: Linux USB utilities
 This package contains the lsusb utility for inspecting the devices
 connected to the USB bus. It shows a graphical representation of the
 devices that are currently plugged in, showing the topology of the
 USB bus. It also displays information on each individual device on
 the bus.
 .
 lsusb, usb-devices, usbhid-dump, usbreset
Homepage: https://github.com/gregkh/usbutils
Original-Maintainer: Aurelien Jarno <[email protected]>

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3438
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 2.39.3-9ubuntu6.5
Replaces: hardlink
Provides: hardlink
Pre-Depends: libblkid1 (>= 2.37.2), libc6 (>= 2.38), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), libmount1 (>= 2.39.1), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.38), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: sensible-utils
Suggests: dosfstools, kbd, util-linux-extra, util-linux-locales
Conflicts: hardlink
Conffiles:
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af
 /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to view kernel
 messages, create new filesystems, view block device information,
 interface with real time clock, etc.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: uuid-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 122
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: libc6-dev | libc-dev, libuuid1 (= 2.39.3-9ubuntu6.5)
Description: Universally Unique ID library - headers and static libraries
 The libuuid library generates and parses 128-bit Universally Unique IDs
 (UUIDs). See RFC 4122 for more information.
 .
 This package contains the development environment for the uuid library.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 151
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.39.3-9ubuntu6.5
Depends: adduser, libc6 (>= 2.38), libsmartcols1 (>= 2.27~rc1), libsystemd0, libuuid1 (>= 2.38.1-2~)
Pre-Depends: libuuid1, init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/uuidd 29b6e6ae2de1365c06806e18f18d8fab
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUIDs, in a secure and guaranteed-unique fashion, even in the face of
 large numbers of threads trying to grab UUIDs running on different CPUs.
 It is used by libuuid as well as the uuidgen program.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/
Original-Maintainer: util-linux packagers <[email protected]>

Package: va-driver-all
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 24
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.20.0-2ubuntu0.1
Depends: i965-va-driver | i965-va-driver-shaders, intel-media-va-driver | intel-media-va-driver-non-free, mesa-va-drivers
Description: Video Acceleration (VA) API -- driver metapackage
 This package depends on the full suite of drivers for the Video Acceleration
 API (VA API). It does not provide any drivers itself, and may be removed if
 you wish to only have certain drivers installed.
Homepage: https://github.com/intel/libva
Original-Maintainer: Debian Multimedia Maintainers <[email protected]>

Package: vdpau-driver-all
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 14
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: libvdpau
Version: 1.5-2build1
Depends: mesa-vdpau-drivers
Suggests: libvdpau-va-gl1, vdpau-driver
Description: Video Decode and Presentation API for Unix (driver metapackage)
 VDPAU (Video Decode and Presentation API for Unix) is an open source
 library (libvdpau) and API designed by NVIDIA originally for its GeForce
 8 series and later GPU hardware, targeted at the X Window System on Unix
 operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API
 allows video programs to offload portions of the video decoding process
 and video post-processing to the GPU video-hardware.
 .
 This package depends on the full suite of drivers for the VDPAU API.
 It does not provide any drivers itself, and may be removed if you wish to
 only have certain drivers installed.
Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/
Original-Maintainer: Debian NVIDIA Maintainers <[email protected]>

Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 4132
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 2:9.1.0016-1ubuntu7.14
Provides: editor
Depends: vim-common (= 2:9.1.0016-1ubuntu7.14), vim-runtime (= 2:9.1.0016-1ubuntu7.14), libacl1 (>= 2.2.23), libc6 (>= 2.38), libgpm2 (>= 1.20.7), libpython3.12t64 (>= 3.12.1), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <[email protected]>

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1854
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.1.0016-1ubuntu7.14
Replaces: vim-runtime (<< 2:9.0.1658-1~)
Recommends: xxd, vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Breaks: vim-runtime (<< 2:9.0.1658-1~)
Conffiles:
 /etc/vim/vimrc 39f4010c45bc0f6d1df420db9febaba8
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <[email protected]>

Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 36532
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.1.0016-1ubuntu7.14
Recommends: vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:9.1.0016-1ubuntu7.14)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <[email protected]>

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1808
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: vim
Version: 2:9.1.0016-1ubuntu7.14
Provides: editor
Depends: vim-common (= 2:9.1.0016-1ubuntu7.14), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6)
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny 2eef1685cce57398be3763940dbced84
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains a minimal version of Vim compiled with no GUI and
 a small subset of features. This package's sole purpose is to provide
 the vi binary for base installations.
 .
 If a vim binary is wanted, try one of the following more featureful
 packages: vim, vim-nox, vim-motif, or vim-gtk3.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <[email protected]>

Package: webp
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 366
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Source: libwebp
Version: 1.3.2-0.4build3
Depends: libc6 (>= 2.34), libgif7 (>= 5.1), libglut3.12 (>= 3.4.0), libglx0, libjpeg8 (>= 8c), libopengl0, libpng16-16t64 (>= 1.6.2), libsharpyuv0 (>= 1.3.2), libtiff6 (>= 4.0.3), libwebp7 (>= 1.3.2), libwebpdemux2 (>= 1.3.2), libwebpmux3 (>= 1.3.2)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/
Original-Maintainer: Jeff Breidenbach <[email protected]>

Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 916
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.4-1ubuntu4.1
Depends: libc6 (>= 2.38), libidn2-0 (>= 0.6), libpcre2-8-0 (>= 10.22), libpsl5t64 (>= 0.16.0), libssl3t64 (>= 3.0.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <[email protected]>

Package: whiptail
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 56
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: newt
Version: 0.52.24-2ubuntu2
Depends: libc6 (>= 2.38), libnewt0.52 (>= 0.52.24), libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://pagure.io/newt
Original-Maintainer: Alastair McKinstry <[email protected]>

Package: whois
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 272
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 5.5.22
Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libidn2-0 (>= 2.0.3)
Description: intelligent WHOIS client
 This package provides a commandline client for the WHOIS (RFC 3912)
 protocol, which queries online servers for information such as contact
 details for domains and IP address assignments.
 It can intelligently select the appropriate WHOIS server for most queries.
 .
 The package also contains mkpasswd, a features-rich front end to the
 password encryption function crypt(3).
Original-Maintainer: Marco d'Itri <[email protected]>

Package: wireless-regdb
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 25
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 2025.10.07-0ubuntu1~24.04.1
Conflicts: boot-managed-by-snapd (<< 5~)
Description: wireless regulatory database
 This package contains the wireless regulatory database used by the Central
 Regulatory Database Agent (CRDA) to configure wireless devices to operate
 within the radio spectrum allowed in the local jurisdiction.
 .
 This regulatory information is provided with no warranty either expressed or
 implied. Only Linux drivers which use cfg80211 framework can make use of the
 regulatory database and CRDA.
Homepage: https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb
Original-Maintainer: Seth Forshee <[email protected]>

Package: x11-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 277
Maintainer: Ubuntu X-SWAT <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: xorg
Version: 1:7.7+23ubuntu3
Depends: lsb-base (>= 1.3-9ubuntu2)
Conffiles:
 /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233
 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f
 /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0
 /etc/X11/Xsession 1ec5f844cc2d850a8d98aed509e3198c
 /etc/X11/Xsession.d/20x11-common_process-args 6957432229b7305a40cb84a7a63edd4e
 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c
 /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd
 /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040
 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d
 /etc/X11/Xsession.d/60x11-common_xdg_path b4d4976a8dfa6ca2123f840fbfee76c7
 /etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0
 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168
 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a
 /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1
 /etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43
Description: X Window System (X.Org) infrastructure
 x11-common contains the filesystem infrastructure required for further
 installation of the X Window System in any configuration; it does not
 provide a full installation of clients, servers, libraries, and utilities
 required to run the X Window System.
 .
 A number of terms are used to refer to the X Window System, including "X",
 "X Version 11", "X11", "X11R6", and "X11R7".  The version of X used in
 Debian is derived from the version released by the X.Org Foundation, and
 is thus often also referred to as "X.Org".  All of the preceding quoted
 terms are functionally interchangeable in an Debian system.
Homepage: https://www.x.org/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: x11proto-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1685
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2023.2-1
Replaces: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Provides: x11proto-core-dev (= 2023.2-1), x11proto-dri2-dev (= 2023.2-1), x11proto-fonts-dev (= 2023.2-1), x11proto-gl-dev (= 2023.2-1), x11proto-input-dev (= 2023.2-1), x11proto-kb-dev (= 2023.2-1), x11proto-present-dev (= 2023.2-1), x11proto-randr-dev (= 2023.2-1), x11proto-record-dev (= 2023.2-1), x11proto-render-dev (= 2023.2-1), x11proto-scrnsaver-dev (= 2023.2-1), x11proto-video-dev (= 2023.2-1), x11proto-xext-dev (= 2023.2-1), x11proto-xf86dga-dev (= 2023.2-1), x11proto-xf86dri-dev (= 2023.2-1), x11proto-xf86vidmode-dev (= 2023.2-1), x11proto-xinerama-dev (= 2023.2-1)
Depends: xorg-sgml-doctools (>= 1:1.5)
Breaks: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Description: X11 extension protocols and auxiliary headers
 This package provides development headers describing the wire protocol
 for the X11 core and extension protocols, and also provides a number of
 utility headers, used to abstract OS-specific functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This package is built from the X.org xorgproto module.
Original-Maintainer: Debian X Strike Force <[email protected]>
Homepage: https://www.x.org/

Package: xdg-user-dirs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 152
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 0.18-1build1
Depends: libc6 (>= 2.34)
Conffiles:
 /etc/xdg/autostart/xdg-user-dirs.desktop 284e639a243bfb86fc415ce448e8fa35
 /etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d
 /etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb
Description: tool to manage well known user directories
 xdg-user-dirs is a tool to help manage "well known" user directories
 like the desktop folder and the music folder. It also handles
 localization (i.e. translation) of the filenames.
 .
 The way it works is that xdg-user-dirs-update is run very early in the
 login phase. This program reads a configuration file, and a set of
 default directories. It then creates localized versions of these
 directories in the users home directory and sets up a config file in
 $(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to
 ~/.config) that applications can read to find these directories.
Homepage: https://www.freedesktop.org/wiki/Software/xdg-user-dirs
Original-Maintainer: Debian GNOME Maintainers <[email protected]>

Package: xfonts-encodings
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 664
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1:1.0.5-0ubuntu2
Replaces: xfonts-base (<< 1:1.0.0)
Depends: x11-common
Description: Encodings for X.Org fonts
 This package contains the encodings that map to specific characters.
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: xfonts-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 431
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 1:7.7+6build3
Depends: libc6 (>= 2.38), libfontenc1 (>= 1:1.1.8), libfreetype6 (>= 2.2.1), zlib1g (>= 1:1.1.4), x11-common, xfonts-encodings
Description: X Window System font utility programs
 xfonts-utils provides a set of utility programs shipped with the X Window
 System that are needed for font management.
 .
 The programs in this package include:
  - bdftopcf, which converts BDF fonts to PCF fonts;
  - bdftruncate and ucs2any, tools to generate fonts with various encodings
    from ISO 10646-encoded fonts
  - mkfontdir, a program to generate fonts.dir files;
  - mkfontscale, a program to generate fonts.scale files;
  - fonttosfnt, a program to wrap bitmap fonts in a sfnt (TrueType) wrapper.
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: xfsprogs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2996
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 6.6.0-1ubuntu2.1
Replaces: xfsdump (<< 3.0.0)
Provides: fsck-backend
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.20), libedit2 (>= 2.11-20080614-0), libicu74 (>= 74.1-1~), libinih1 (>= 53), liburcu8t64 (>= 0.13.0), libuuid1 (>= 2.16), python3:any
Suggests: xfsdump, acl, attr, quota
Breaks: xfsdump (<< 3.0.0)
Description: Utilities for managing the XFS filesystem
 A set of commands to use the XFS filesystem, including mkfs.xfs.
 .
 XFS is a high performance journaling filesystem which originated
 on the SGI IRIX platform.  It is completely multi-threaded, can
 support large files and large filesystems, extended attributes,
 variable block sizes, is extent based, and makes extensive use of
 Btrees (directories, extents, free space) to aid both performance
 and scalability.
 .
 Refer to the documentation at https://xfs.wiki.kernel.org/
 for complete details.
Homepage: https://xfs.wiki.kernel.org/
Original-Maintainer: XFS Development Team <[email protected]>

Package: xkb-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 4156
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.41-2ubuntu1.1
Breaks: x11-xkb-utils (<< 7.7+5)
Description: X Keyboard Extension (XKB) configuration data
 This package contains configuration data used by the X Keyboard
 Extension (XKB), which allows selection of keyboard layouts when
 using a graphical interface.
 .
 Every X11 vendor provides its own XKB data files, so keyboard layout
 designers have to send their layouts to several places.  The
 xkeyboard-config project has been launched at FreeDesktop in order
 to provide a central repository that could be used by all vendors.
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 114
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 0.19
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
 /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
 This package creates the XML infrastructure directories and provides
 XML catalog file support in compliance with the current Debian XML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/xml
      - /usr/share/xml/{declaration,entities,misc,schema}
      - /usr/local/share/xml/{declaration,entities,misc,schema}
 .
   * XML catalog schema: OASIS XML Catalog Committee Specification 1.0
 .
   * update-xmlcatalog(8): tool for maintaining the root XML catalog
     file and the package XML catalog files in the '/etc/xml' directory
     as well as local XML catalog files.
 .
   * dh_installxmlcatalogs(1): debhelper tool for installing local XML
     catalog files and registering XML entities in package XML catalog
     files and the root XML catalog file (requires debhelper package)
Original-Maintainer: Debian QA Group <[email protected]>

Package: xorg-sgml-doctools
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 78
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Version: 1:1.11-1.1
Description: Common tools for building X.Org SGML documentation
 This package contains tools for building the X.Org SGML documentation.
 Currently it only includes various entity definitions for the current
 release.
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: xtrans-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 302
Maintainer: Ubuntu Developers <[email protected]>
Architecture: all
Multi-Arch: foreign
Source: xtrans
Version: 1.4.0-1
Description: X transport library (development files)
 xtrans includes a number of routines to make X implementations
 transport-independent; at time of writing, it includes support for UNIX
 sockets, IPv4, IPv6, and DECnet.
 .
 xtrans is not actually a library in itself; it includes .c files which are
 then used in the compilation of X servers, libraries, et al.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://cgit.freedesktop.org/xorg/lib/libxtrans/
Original-Maintainer: Debian X Strike Force <[email protected]>

Package: xxd
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 154
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: vim
Version: 2:9.1.0016-1ubuntu7.14
Depends: libc6 (>= 2.34)
Description: tool to make (or reverse) a hex dump
 xxd creates a hex dump of a given file or standard input.  It can also convert
 a hex dump back to its original binary form.
Homepage: https://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <[email protected]>

Package: xz-utils
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 732
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 5.6.1+really5.4.5-1ubuntu0.3
Replaces: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.34), liblzma5 (>= 5.4.0)
Breaks: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: https://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <[email protected]>

Package: zerofree
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 29
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Version: 1.1.1-1build5
Depends: libc6 (>= 2.34), libext2fs2t64 (>= 1.42)
Description: zero free blocks from ext2, ext3 and ext4 file-systems
 Zerofree finds the unallocated blocks with non-zero value content in
 an ext2, ext3 or ext4 file-system and fills them with zeroes
 (zerofree can also work with another value than zero). This is mostly
 useful if the device on which this file-system resides is a disk
 image. In this case, depending on the type of disk image, a secondary
 utility may be able to reduce the size of the disk image after
 zerofree has been run. Zerofree requires the file-system to be
 unmounted or mounted read-only.
 .
 The usual way to achieve the same result (zeroing the unused
 blocks) is to run "dd" to create a file full of zeroes that takes up
 the entire free space on the drive, and then delete this file. This
 has many disadvantages, which zerofree alleviates:
  * it is slow;
  * it makes the disk image (temporarily) grow to its maximal extent;
  * it (temporarily) uses all free space on the disk, so other
    concurrent write actions may fail.
 .
 Zerofree has been written to be run from GNU/Linux systems installed
 as guest OSes inside a virtual machine. If this is not your case, you
 almost certainly don't need this package. (One other use case would
 be to erase sensitive data a little bit more securely than with a
 simple "rm").
Homepage: https://frippery.org/uml/
Original-Maintainer: Thibaut Paumard <[email protected]>

Package: zip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 536
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0-13ubuntu0.2
Depends: libbz2-1.0, libc6 (>= 2.34)
Recommends: unzip
Description: Archiver for .zip files
 This is InfoZIP's zip program. It produces files that are fully
 compatible with the popular PKZIP program; however, the command line
 options are not identical. In other words, the end result is the same,
 but the methods differ. :-)
 .
 This version supports encryption.
Homepage: https://infozip.sourceforge.net/Zip.html
Original-Maintainer: Santiago Vila <[email protected]>

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 163
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.3.dfsg-3.1ubuntu2.1
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2023.20230311.66589-8)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <[email protected]>

Package: zlib1g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1322
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.3.dfsg-3.1ubuntu2.1
Provides: libz-dev
Depends: zlib1g (= 1:1.3.dfsg-3.1ubuntu2.1), libc6-dev | libc-dev
Conflicts: zlib1-dev
Description: compression library - development
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the development support
 files.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <[email protected]>

Package: zstd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1802
Maintainer: Ubuntu Developers <[email protected]>
Architecture: amd64
Multi-Arch: foreign
Source: libzstd
Version: 1.5.5+dfsg2-2build1.1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), liblz4-1 (>= 1.8.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 12), zlib1g (>= 1:1.1.4)
Description: fast lossless compression algorithm -- CLI tool
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the CLI program implementing zstd.
Homepage: https://github.com/facebook/zstd
Original-Maintainer: RPM packaging team <[email protected]>